[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 5/8] virtio-blk: fix "disabled data plane" mode
From: |
Paolo Bonzini |
Subject: |
Re: [Qemu-devel] [PATCH 5/8] virtio-blk: fix "disabled data plane" mode |
Date: |
Tue, 15 Mar 2016 15:08:54 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.6.0 |
On 15/03/2016 14:18, Cornelia Huck wrote:
> On Tue, 15 Mar 2016 20:45:30 +0800
> Fam Zheng <address@hidden> wrote:
>
>> On Fri, 03/11 11:28, Paolo Bonzini wrote:
>
>>> But secondarily, I'm thinking of making the logic simpler to understand
>>> in two ways:
>>>
>>> 1) adding a mutex around virtio_blk_data_plane_start/stop.
>>>
>>> 2) moving
>>>
>>> event_notifier_set(virtio_queue_get_host_notifier(s->vq));
>>> virtio_queue_aio_set_host_notifier_handler(s->vq, s->ctx, true, true);
>>>
>>> to a bottom half (created with aio_bh_new in s->ctx). The bottom half
>>> takes the mutex, checks again "if (vblk->dataplane_started)" and if it's
>>> true starts the processing.
>>
>> Like this? If it captures your idea, could Bo or Christian help test?
>>
>> ---
>>
>> From b5b8886693828d498ee184fc7d4e13d8c06cdf39 Mon Sep 17 00:00:00 2001
>> From: Fam Zheng <address@hidden>
>> Date: Thu, 10 Mar 2016 10:26:36 +0800
>> Subject: [PATCH] virtio-blk dataplane start crash fix
>>
>> Suggested-by: Paolo Bonzini <address@hidden>
>> Signed-off-by: Fam Zheng <address@hidden>
>> ---
>> block.c | 4 +++-
>> hw/block/dataplane/virtio-blk.c | 39 ++++++++++++++++++++++++++++++++-------
>> 2 files changed, 35 insertions(+), 8 deletions(-)
>>
>> diff --git a/block.c b/block.c
>> index ba24b8e..e37e8f7 100644
>> --- a/block.c
>> +++ b/block.c
>> @@ -4093,7 +4093,9 @@ void bdrv_attach_aio_context(BlockDriverState *bs,
>>
>> void bdrv_set_aio_context(BlockDriverState *bs, AioContext *new_context)
>> {
>> - bdrv_drain(bs); /* ensure there are no in-flight requests */
>> + /* ensure there are no in-flight requests */
>> + bdrv_drained_begin(bs);
>> + bdrv_drained_end(bs);
I'm not sure that this is necessary. An empty section should be the
same as plain old bdrv_drain.
>> bdrv_detach_aio_context(bs);
>>
>> diff --git a/hw/block/dataplane/virtio-blk.c
>> b/hw/block/dataplane/virtio-blk.c
>> index 36f3d2b..6db5c22 100644
>> --- a/hw/block/dataplane/virtio-blk.c
>> +++ b/hw/block/dataplane/virtio-blk.c
>> @@ -49,6 +49,8 @@ struct VirtIOBlockDataPlane {
>>
>> /* Operation blocker on BDS */
>> Error *blocker;
>> +
>> + QemuMutex start_lock;
>> };
>>
>> /* Raise an interrupt to signal guest, if necessary */
>> @@ -150,6 +152,7 @@ void virtio_blk_data_plane_create(VirtIODevice *vdev,
>> VirtIOBlkConf *conf,
>> s = g_new0(VirtIOBlockDataPlane, 1);
>> s->vdev = vdev;
>> s->conf = conf;
>> + qemu_mutex_init(&s->start_lock);
>>
>> if (conf->iothread) {
>> s->iothread = conf->iothread;
>> @@ -184,15 +187,38 @@ void
>> virtio_blk_data_plane_destroy(VirtIOBlockDataPlane *s)
>> g_free(s);
>> }
>>
>> +typedef struct {
>> + VirtIOBlockDataPlane *s;
>> + QEMUBH *bh;
>> +} VirtIOBlockStartData;
>> +
>> +static void virtio_blk_data_plane_start_bh_cb(void *opaque)
>> +{
>> + VirtIOBlockStartData *data = opaque;
>> + VirtIOBlockDataPlane *s = data->s;
>
> Won't you need to check here whether ->started is still set?
Yes.
>> +
>> + /* Kick right away to begin processing requests already in vring */
>> + event_notifier_set(virtio_queue_get_host_notifier(s->vq));
>> +
>> + /* Get this show started by hooking up our callbacks */
>> + virtio_queue_aio_set_host_notifier_handler(s->vq, s->ctx, true, true);
>> +
>> + qemu_bh_delete(data->bh);
>> + g_free(data);
>> +}
>> +
>> /* Context: QEMU global mutex held */
>> void virtio_blk_data_plane_start(VirtIOBlockDataPlane *s)
>> {
>> BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(s->vdev)));
>> VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
>> VirtIOBlock *vblk = VIRTIO_BLK(s->vdev);
>> + VirtIOBlockStartData *data;
>> int r;
>>
>> + qemu_mutex_lock(&s->start_lock);
>> if (vblk->dataplane_started || s->starting) {
>
> Do we still need ->starting with the new mutex?
No, but really we shouldn't have needed it before either. :) So a task
for another day.
>> + qemu_mutex_unlock(&s->start_lock);
>> return;
>> }
>>
>> /* Context: QEMU global mutex held */
>
> Do you also need to do something in _stop()?
_stop definitely needs to take the mutex too.
- Re: [Qemu-devel] [PATCH 5/8] virtio-blk: fix "disabled data plane" mode, (continued)
- Re: [Qemu-devel] [PATCH 5/8] virtio-blk: fix "disabled data plane" mode, Christian Borntraeger, 2016/03/09
- Re: [Qemu-devel] [PATCH 5/8] virtio-blk: fix "disabled data plane" mode, Paolo Bonzini, 2016/03/09
- Re: [Qemu-devel] [PATCH 5/8] virtio-blk: fix "disabled data plane" mode, Fam Zheng, 2016/03/09
- Re: [Qemu-devel] [PATCH 5/8] virtio-blk: fix "disabled data plane" mode, Christian Borntraeger, 2016/03/10
- Re: [Qemu-devel] [PATCH 5/8] virtio-blk: fix "disabled data plane" mode, Christian Borntraeger, 2016/03/10
- Re: [Qemu-devel] [PATCH 5/8] virtio-blk: fix "disabled data plane" mode, Paolo Bonzini, 2016/03/11
- Re: [Qemu-devel] [PATCH 5/8] virtio-blk: fix "disabled data plane" mode, tu bo, 2016/03/14
- Re: [Qemu-devel] [PATCH 5/8] virtio-blk: fix "disabled data plane" mode, Fam Zheng, 2016/03/15
- Re: [Qemu-devel] [PATCH 5/8] virtio-blk: fix "disabled data plane" mode, Cornelia Huck, 2016/03/15
- Re: [Qemu-devel] [PATCH 5/8] virtio-blk: fix "disabled data plane" mode,
Paolo Bonzini <=
- Re: [Qemu-devel] [PATCH 5/8] virtio-blk: fix "disabled data plane" mode, Fam Zheng, 2016/03/15
- Re: [Qemu-devel] [PATCH 5/8] virtio-blk: fix "disabled data plane" mode, tu bo, 2016/03/16