[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] Ubuntu 14.04 LTS Arm for Raspberry - QEMU Support
From: |
Andrew Baumann |
Subject: |
Re: [Qemu-devel] Ubuntu 14.04 LTS Arm for Raspberry - QEMU Support |
Date: |
Wed, 16 Mar 2016 23:07:46 +0000 |
Hi Vincenzo,
> From: Vincenzo Calabrò [mailto:address@hidden
> Sent: Wednesday, 16 March 2016 12:39 PM
[...]
> 1. I'm using the "official" arm ubuntu 14.04
> (https://wiki.ubuntu.com/ARM/RaspberryPi) - you can download the image from
> that link and follow the instruction to flash a SD card.... yes I'm using the
> SD card instead of the image on the host. The reason is I want to emulate the
> RPi with its real SD card.
Ok. Using the SD card should be fine, but I have never tested the Ubuntu image
before, just an (older) version of Raspbian.
> 2. after copying the kernel7.img and the bcm2709-rpi-2-b.dtb file into a
> "boot" folder, I use the following command with the lastest (up to one day
> ago) qemu:
> qemu-system-arm \
> -kernel boot/kernel7.img \
> -dtb boot/bcm2709-rpi-2-b.dtb \
> -M raspi2 -m 256 \
Why are you emulating a 256MB pi2? Does such a configuration exist? I thought
they all had 1GB of RAM.
> -no-reboot -serial stdio \
> -append "rw earlyprintk loglevel=8 console=ttyAMA0,115200
> dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 panic=1 rootfstype=ext4" \
> -hda /dev/sdb \
> -net nic -net
> user,net=http://10.0.0.0/8,host=10.0.0.1,hostfwd=tcp:127.0.0.1:2222-10.0.0.2:22
[...]
> [ 5.109543] bcm_power: Broadcom power driver
> [ 5.111766] bcm_power_open() -> 0
> [ 5.112687] bcm_power_request(0, 8)
This is a known (albeit only as of Peter's email to me slightly earlier today
:) issue, since we don't model the power management unit in mainline qemu.
There is a trivial emulation for it in the raspi branch here:
https://github.com/0xabu/qemu ... I would be curious to know whether you fare
any better with this version?
Cheers,
Andrew