[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCHv2] slirp: Allow to disable IPv4 or IPv6
From: |
Samuel Thibault |
Subject: |
[Qemu-devel] [PATCHv2] slirp: Allow to disable IPv4 or IPv6 |
Date: |
Thu, 24 Mar 2016 22:00:45 +0100 |
Make net=none disable IPv4 and ip6-net=none disable IPv6, so the user can
setup IPv4-only and IPv6-only network environments.
Signed-off-by: Samuel Thibault <address@hidden>
---
net/slirp.c | 19 +++++++++++++------
qapi-schema.json | 15 +++++++++++++--
qemu-options.hx | 19 ++++++++++++-------
slirp/ip6_icmp.c | 8 ++++++++
slirp/ip6_input.c | 5 +++++
slirp/ip_input.c | 4 ++++
slirp/libslirp.h | 3 ++-
slirp/slirp.c | 10 +++++++++-
slirp/slirp.h | 2 ++
9 files changed, 68 insertions(+), 17 deletions(-)
diff --git a/net/slirp.c b/net/slirp.c
index 95239bc..4c9319e 100644
--- a/net/slirp.c
+++ b/net/slirp.c
@@ -135,8 +135,8 @@ static NetClientInfo net_slirp_info = {
static int net_slirp_init(NetClientState *peer, const char *model,
const char *name, int restricted,
- const char *vnetwork, const char *vhost,
- const char *vprefix6, int vprefix6_len,
+ bool ip4, const char *vnetwork, const char *vhost,
+ bool ip6, const char *vprefix6, int vprefix6_len,
const char *vhost6,
const char *vhostname, const char *tftp_export,
const char *bootfile, const char *vdhcp_start,
@@ -164,6 +164,12 @@ static int net_slirp_init(NetClientState *peer, const char
*model,
char *end;
struct slirp_config_str *config;
+ if (!ip4 && !ip6) {
+ /* Enable both by default */
+ ip4 = 1;
+ ip6 = 1;
+ }
+
if (!tftp_export) {
tftp_export = legacy_tftp_prefix;
}
@@ -308,8 +314,8 @@ static int net_slirp_init(NetClientState *peer, const char
*model,
s = DO_UPCAST(SlirpState, nc, nc);
- s->slirp = slirp_init(restricted, net, mask, host,
- ip6_prefix, vprefix6_len, ip6_host,
+ s->slirp = slirp_init(restricted, ip4, net, mask, host,
+ ip6, ip6_prefix, vprefix6_len, ip6_host,
vhostname, tftp_export, bootfile, dhcp,
dns, ip6_dns, dnssearch, s);
QTAILQ_INSERT_TAIL(&slirp_stacks, s, entry);
@@ -827,8 +833,9 @@ int net_init_slirp(const NetClientOptions *opts, const char
*name,
net_init_slirp_configs(user->hostfwd, SLIRP_CFG_HOSTFWD);
net_init_slirp_configs(user->guestfwd, 0);
- ret = net_slirp_init(peer, "user", name, user->q_restrict, vnet,
- user->host, user->ip6_prefix, user->ip6_prefixlen,
+ ret = net_slirp_init(peer, "user", name, user->q_restrict,
+ user->ip4, vnet, user->host,
+ user->ip6, user->ip6_prefix, user->ip6_prefixlen,
user->ip6_host, user->hostname, user->tftp,
user->bootfile, user->dhcpstart,
user->dns, user->ip6_dns, user->smb,
diff --git a/qapi-schema.json b/qapi-schema.json
index 88f9b81..0b693ec 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -2425,9 +2425,16 @@
#
# @restrict: #optional isolate the guest from the host
#
+# @ip4: #optional whether to support IPv4, default is to support both IPv4 and
IPv6.
+#
+# @ip6: #optional whether to support IPv6, default is to support both IPv4 and
IPv6.
+#
# @ip: #optional legacy parameter, use net= instead
#
-# @net: #optional IP address and optional netmask
+# @net: #optional IP network address that the guest will see, in the
+# form addr[/netmask] (default is 10.0.2.0/24). The netmask is optional,
+# and can be either in the form a.b.c.d or as a number of valid top-most
+# bits.
#
# @host: #optional guest-visible address of the host
#
@@ -2443,7 +2450,9 @@
# @dnssearch: #optional list of DNS suffixes to search, passed as DHCP option
# to the guest
#
-# @ip6-prefix: #optional IPv6 network prefix (default is fec0::) (since 2.6)
+# @ip6-prefix: #optional IPv6 network prefix (default is fec0::) (since
+# 2.6). The network prefix is given in the usual hexadecimal IPv6
+# address notation.
#
# @ip6-prefixlen: #optional IPv6 network prefix length (default is 64) (since
2.6)
#
@@ -2466,6 +2475,8 @@
'data': {
'*hostname': 'str',
'*restrict': 'bool',
+ '*ip4': 'bool',
+ '*ip6': 'bool',
'*ip': 'str',
'*net': 'str',
'*host': 'str',
diff --git a/qemu-options.hx b/qemu-options.hx
index 732ed8c..cc43c32 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -1560,8 +1560,9 @@ DEF("smb", HAS_ARG, QEMU_OPTION_smb, "", QEMU_ARCH_ALL)
DEF("netdev", HAS_ARG, QEMU_OPTION_netdev,
#ifdef CONFIG_SLIRP
- "-netdev user,id=str[,net=addr[/mask]][,host=addr][,ip6-net=addr[/int]]\n"
- "
[,ip6-host=addr][,restrict=on|off][,hostname=host][,dhcpstart=addr]\n"
+ "-netdev user,id=str[,ip4][,net=addr[/mask]][,host=addr]\n"
+ " [,ip6][,ip6-net=addr[/int]][,ip6-host=addr]\n"
+ " [,restrict=on|off][,hostname=host][,dhcpstart=addr]\n"
" [,dns=addr][,ip6-dns=addr][,dnssearch=domain][,tftp=dir]\n"
" [,bootfile=f][,hostfwd=rule][,guestfwd=rule]"
#ifndef _WIN32
@@ -1711,17 +1712,21 @@ Connect user mode stack to VLAN @var{n} (@var{n} = 0 is
the default).
Assign symbolic name for use in monitor commands.
@item address@hidden/@var{mask}]
-Set IP network address the guest will see. Optionally specify the netmask,
-either in the form a.b.c.d or as number of valid top-most bits. Default is
-10.0.2.0/24.
+Set IP network address the guest will see or 'none'. Default is
+10.0.2.0/24. The netmask is optional, and can be either in the form
+a.b.c.d or as number of valid top-most bits. 'none' disables IPv4
+completely.
@item address@hidden
Specify the guest-visible address of the host. Default is the 2nd IP in the
guest network, i.e. x.x.x.2.
@item address@hidden/@var{int}]
-Set IPv6 network address the guest will see. Optionally specify the prefix
-size, as number of valid top-most bits. Default is fec0::/64.
+Set IPv6 network address the guest will see or 'none' (default is
+fec0::/64). The network prefix is given in the usual hexadecimal IPv6
+address notation. The prefix size is optional, and is given as the
+number of valid top-most bits (default is 64). 'none' disables IPv6
+completely.
@item address@hidden
Specify the guest-visible IPv6 address of the host. Default is the 2nd IPv6 in
diff --git a/slirp/ip6_icmp.c b/slirp/ip6_icmp.c
index 9d61349..09571bc 100644
--- a/slirp/ip6_icmp.c
+++ b/slirp/ip6_icmp.c
@@ -24,6 +24,10 @@ static void ra_timer_handler(void *opaque)
void icmp6_init(Slirp *slirp)
{
+ if (!slirp->in6_enabled) {
+ return;
+ }
+
slirp->ra_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL, ra_timer_handler,
slirp);
timer_mod(slirp->ra_timer,
qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + NDP_Interval);
@@ -31,6 +35,10 @@ void icmp6_init(Slirp *slirp)
void icmp6_cleanup(Slirp *slirp)
{
+ if (!slirp->in6_enabled) {
+ return;
+ }
+
timer_del(slirp->ra_timer);
timer_free(slirp->ra_timer);
}
diff --git a/slirp/ip6_input.c b/slirp/ip6_input.c
index c0b11e7..ac2e3ea 100644
--- a/slirp/ip6_input.c
+++ b/slirp/ip6_input.c
@@ -24,6 +24,11 @@ void ip6_cleanup(Slirp *slirp)
void ip6_input(struct mbuf *m)
{
struct ip6 *ip6;
+ Slirp *slirp = m->slirp;
+
+ if (!slirp->in6_enabled) {
+ goto bad;
+ }
DEBUG_CALL("ip6_input");
DEBUG_ARG("m = %lx", (long)m);
diff --git a/slirp/ip_input.c b/slirp/ip_input.c
index b464f6b..cdd5483 100644
--- a/slirp/ip_input.c
+++ b/slirp/ip_input.c
@@ -80,6 +80,10 @@ ip_input(struct mbuf *m)
register struct ip *ip;
int hlen;
+ if (!slirp->in_enabled) {
+ goto bad;
+ }
+
DEBUG_CALL("ip_input");
DEBUG_ARG("m = %p", m);
DEBUG_ARG("m_len = %d", m->m_len);
diff --git a/slirp/libslirp.h b/slirp/libslirp.h
index c4b25c9..127aa41 100644
--- a/slirp/libslirp.h
+++ b/slirp/libslirp.h
@@ -8,8 +8,9 @@ typedef struct Slirp Slirp;
int get_dns_addr(struct in_addr *pdns_addr);
-Slirp *slirp_init(int restricted, struct in_addr vnetwork,
+Slirp *slirp_init(int restricted, bool in_enabled, struct in_addr vnetwork,
struct in_addr vnetmask, struct in_addr vhost,
+ bool in6_enabled,
struct in6_addr vprefix_addr6, uint8_t vprefix_len,
struct in6_addr vhost6, const char *vhostname,
const char *tftp_path, const char *bootfile,
diff --git a/slirp/slirp.c b/slirp/slirp.c
index 9ccf415..6256c89 100644
--- a/slirp/slirp.c
+++ b/slirp/slirp.c
@@ -199,8 +199,9 @@ static void slirp_init_once(void)
static void slirp_state_save(QEMUFile *f, void *opaque);
static int slirp_state_load(QEMUFile *f, void *opaque, int version_id);
-Slirp *slirp_init(int restricted, struct in_addr vnetwork,
+Slirp *slirp_init(int restricted, bool in_enabled, struct in_addr vnetwork,
struct in_addr vnetmask, struct in_addr vhost,
+ bool in6_enabled,
struct in6_addr vprefix_addr6, uint8_t vprefix_len,
struct in6_addr vhost6, const char *vhostname,
const char *tftp_path, const char *bootfile,
@@ -215,6 +216,9 @@ Slirp *slirp_init(int restricted, struct in_addr vnetwork,
slirp->grand = g_rand_new();
slirp->restricted = restricted;
+ slirp->in_enabled = in_enabled;
+ slirp->in6_enabled = in6_enabled;
+
if_init(slirp);
ip_init(slirp);
ip6_init(slirp);
@@ -693,6 +697,10 @@ static void arp_input(Slirp *slirp, const uint8_t *pkt,
int pkt_len)
int ar_op;
struct ex_list *ex_ptr;
+ if (!slirp->in_enabled) {
+ return;
+ }
+
ar_op = ntohs(ah->ar_op);
switch(ar_op) {
case ARPOP_REQUEST:
diff --git a/slirp/slirp.h b/slirp/slirp.h
index 9ad88e7..0b84027 100644
--- a/slirp/slirp.h
+++ b/slirp/slirp.h
@@ -179,6 +179,8 @@ struct Slirp {
u_int last_slowtimo;
bool do_slowtimo;
+ bool in_enabled, in6_enabled;
+
/* virtual network configuration */
struct in_addr vnetwork_addr;
struct in_addr vnetwork_mask;
--
2.8.0.rc3
- [Qemu-devel] [PATCHv2] slirp: Allow to disable IPv4 or IPv6,
Samuel Thibault <=