[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 48/48] iotests: Test qemu-img convert -S 0 behavior
From: |
Kevin Wolf |
Subject: |
[Qemu-devel] [PULL 48/48] iotests: Test qemu-img convert -S 0 behavior |
Date: |
Tue, 29 Mar 2016 17:08:48 +0200 |
From: Max Reitz <address@hidden>
Passing -S 0 to qemu-img convert should result in all source data being
copied to the output, even if that source data is known to be 0. The
output image should therefore have exactly the same size on disk as an
image which we explicitly filled with data.
Signed-off-by: Max Reitz <address@hidden>
Reviewed-by: Fam Zheng <address@hidden>
Signed-off-by: Kevin Wolf <address@hidden>
---
tests/qemu-iotests/150 | 105 +++++++++++++++++++++++++++++++++++++++++++++
tests/qemu-iotests/150.out | 14 ++++++
tests/qemu-iotests/group | 1 +
3 files changed, 120 insertions(+)
create mode 100755 tests/qemu-iotests/150
create mode 100644 tests/qemu-iotests/150.out
diff --git a/tests/qemu-iotests/150 b/tests/qemu-iotests/150
new file mode 100755
index 0000000..97d2a35
--- /dev/null
+++ b/tests/qemu-iotests/150
@@ -0,0 +1,105 @@
+#!/bin/bash
+#
+# Test that qemu-img convert -S 0 fully allocates the target image
+#
+# Copyright (C) 2016 Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+# creator
address@hidden
+
+seq="$(basename $0)"
+echo "QA output created by $seq"
+
+here="$PWD"
+tmp=/tmp/$$
+status=1 # failure is the default!
+
+_cleanup()
+{
+ _cleanup_test_img
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+
+_supported_fmt generic
+_supported_proto file
+_supported_os Linux
+
+
+on_disk_size()
+{
+ du "$@" | sed -e 's/\t\+.*//'
+}
+
+
+img_size=1048576
+
+
+echo
+echo '=== Comparing empty image against sparse conversion ==='
+echo
+
+_make_test_img $img_size
+
+empty_size=$(on_disk_size "$TEST_IMG")
+
+
+$QEMU_IMG_PROG convert -O "$IMGFMT" -S 512 \
+ "json:{ 'driver': 'null-co', 'size': $img_size, 'read-zeroes': true }" \
+ "$TEST_IMG"
+
+sparse_convert_size=$(on_disk_size "$TEST_IMG")
+
+
+if [ "$empty_size" -eq "$sparse_convert_size" ]; then
+ echo 'Equal image size'
+else
+ echo 'Different image size'
+fi
+
+
+echo
+echo '=== Comparing full image against non-sparse conversion ==='
+echo
+
+_make_test_img $img_size
+$QEMU_IO -c "write 0 $img_size" "$TEST_IMG" | _filter_qemu_io
+
+full_size=$(on_disk_size "$TEST_IMG")
+
+
+$QEMU_IMG convert -O "$IMGFMT" -S 0 \
+ "json:{ 'driver': 'null-co', 'size': $img_size, 'read-zeroes': true }" \
+ "$TEST_IMG"
+
+non_sparse_convert_size=$(on_disk_size "$TEST_IMG")
+
+
+if [ "$full_size" -eq "$non_sparse_convert_size" ]; then
+ echo 'Equal image size'
+else
+ echo 'Different image size'
+fi
+
+
+# success, all done
+echo "*** done"
+rm -f $seq.full
+status=0
diff --git a/tests/qemu-iotests/150.out b/tests/qemu-iotests/150.out
new file mode 100644
index 0000000..2d29da1
--- /dev/null
+++ b/tests/qemu-iotests/150.out
@@ -0,0 +1,14 @@
+QA output created by 150
+
+=== Comparing empty image against sparse conversion ===
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576
+Equal image size
+
+=== Comparing full image against non-sparse conversion ===
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576
+wrote 1048576/1048576 bytes at offset 0
+1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Equal image size
+*** done
diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group
index 92ae8ec..2952b9d 100644
--- a/tests/qemu-iotests/group
+++ b/tests/qemu-iotests/group
@@ -151,3 +151,4 @@
146 auto quick
148 rw auto quick
149 rw auto sudo
+150 rw auto quick
--
1.8.3.1
- [Qemu-devel] [PULL 38/48] nbd: Support BDRV_REQ_FUA, (continued)
- [Qemu-devel] [PULL 38/48] nbd: Support BDRV_REQ_FUA, Kevin Wolf, 2016/03/29
- [Qemu-devel] [PULL 41/48] qemu-io: Use bdrv_parse_cache_mode() in reopen_f(), Kevin Wolf, 2016/03/29
- [Qemu-devel] [PULL 44/48] block: Remove bdrv_(set_)enable_write_cache(), Kevin Wolf, 2016/03/29
- [Qemu-devel] [PULL 40/48] block: Use bdrv_parse_cache_mode() in drive_init(), Kevin Wolf, 2016/03/29
- [Qemu-devel] [PULL 20/48] block: an interoperability test for luks vs dm-crypt/cryptsetup, Kevin Wolf, 2016/03/29
- [Qemu-devel] [PULL 42/48] block: Remove bdrv_parse_cache_flags(), Kevin Wolf, 2016/03/29
- [Qemu-devel] [PULL 46/48] block/null-{co, aio}: Allow reading zeroes, Kevin Wolf, 2016/03/29
- [Qemu-devel] [PULL 43/48] block: Remove BDRV_O_CACHE_WB, Kevin Wolf, 2016/03/29
- [Qemu-devel] [PULL 47/48] block/null-{co, aio}: Implement get_block_status(), Kevin Wolf, 2016/03/29
- [Qemu-devel] [PULL 45/48] qemu-img: Fix preallocation with -S 0 for convert, Kevin Wolf, 2016/03/29
- [Qemu-devel] [PULL 48/48] iotests: Test qemu-img convert -S 0 behavior,
Kevin Wolf <=
- Re: [Qemu-devel] [PULL 00/48] Block layer patches, Peter Maydell, 2016/03/29