[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 10/17] block: m25p80: Fast read and 4bytes commands
From: |
Peter Maydell |
Subject: |
[Qemu-devel] [PULL 10/17] block: m25p80: Fast read and 4bytes commands |
Date: |
Wed, 30 Mar 2016 15:57:42 +0100 |
From: Marcin Krzeminski <address@hidden>
Adds fast read and 4bytes commands family.
This work is based on Pawel Lenkow patch from v1.
Signed-off-by: Marcin Krzeminski <address@hidden>
Reviewed-by: Peter Crosthwaite <address@hidden>
Message-id: address@hidden
Signed-off-by: Peter Maydell <address@hidden>
---
hw/block/m25p80.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 46 insertions(+), 4 deletions(-)
diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
index 04e8730..1e615ca 100644
--- a/hw/block/m25p80.c
+++ b/hw/block/m25p80.c
@@ -243,20 +243,29 @@ typedef enum {
JEDEC_READ = 0x9f,
BULK_ERASE = 0xc7,
- READ = 0x3,
- FAST_READ = 0xb,
+ READ = 0x03,
+ READ4 = 0x13,
+ FAST_READ = 0x0b,
+ FAST_READ4 = 0x0c,
DOR = 0x3b,
+ DOR4 = 0x3c,
QOR = 0x6b,
+ QOR4 = 0x6c,
DIOR = 0xbb,
+ DIOR4 = 0xbc,
QIOR = 0xeb,
+ QIOR4 = 0xec,
- PP = 0x2,
+ PP = 0x02,
+ PP4 = 0x12,
DPP = 0xa2,
QPP = 0x32,
ERASE_4K = 0x20,
+ ERASE4_4K = 0x21,
ERASE_32K = 0x52,
ERASE_SECTOR = 0xd8,
+ ERASE4_SECTOR = 0xdc,
EN_4BYTE_ADDR = 0xB7,
EX_4BYTE_ADDR = 0xE9,
@@ -379,6 +388,7 @@ static void flash_erase(Flash *s, int offset, FlashCMD cmd)
switch (cmd) {
case ERASE_4K:
+ case ERASE4_4K:
len = 4 << 10;
capa_to_assert = ER_4K;
break;
@@ -387,6 +397,7 @@ static void flash_erase(Flash *s, int offset, FlashCMD cmd)
capa_to_assert = ER_32K;
break;
case ERASE_SECTOR:
+ case ERASE4_SECTOR:
len = s->pi->sector_size;
break;
case BULK_ERASE:
@@ -445,7 +456,20 @@ void flash_write8(Flash *s, uint64_t addr, uint8_t data)
static inline int get_addr_length(Flash *s)
{
- return s->four_bytes_address_mode ? 4 : 3;
+ switch (s->cmd_in_progress) {
+ case PP4:
+ case READ4:
+ case QIOR4:
+ case ERASE4_4K:
+ case ERASE4_SECTOR:
+ case FAST_READ4:
+ case DOR4:
+ case QOR4:
+ case DIOR4:
+ return 4;
+ default:
+ return s->four_bytes_address_mode ? 4 : 3;
+ }
}
static void complete_collecting_data(Flash *s)
@@ -469,19 +493,28 @@ static void complete_collecting_data(Flash *s)
case DPP:
case QPP:
case PP:
+ case PP4:
s->state = STATE_PAGE_PROGRAM;
break;
case READ:
+ case READ4:
case FAST_READ:
+ case FAST_READ4:
case DOR:
+ case DOR4:
case QOR:
+ case QOR4:
case DIOR:
+ case DIOR4:
case QIOR:
+ case QIOR4:
s->state = STATE_READ;
break;
case ERASE_4K:
+ case ERASE4_4K:
case ERASE_32K:
case ERASE_SECTOR:
+ case ERASE4_SECTOR:
flash_erase(s, s->cur_addr, s->cmd_in_progress);
break;
case WRSR:
@@ -568,12 +601,16 @@ static void decode_new_cmd(Flash *s, uint32_t value)
switch (value) {
case ERASE_4K:
+ case ERASE4_4K:
case ERASE_32K:
case ERASE_SECTOR:
+ case ERASE4_SECTOR:
case READ:
+ case READ4:
case DPP:
case QPP:
case PP:
+ case PP4:
s->needed_bytes = get_addr_length(s);
s->pos = 0;
s->len = 0;
@@ -581,8 +618,11 @@ static void decode_new_cmd(Flash *s, uint32_t value)
break;
case FAST_READ:
+ case FAST_READ4:
case DOR:
+ case DOR4:
case QOR:
+ case QOR4:
s->needed_bytes = get_addr_length(s);
if (((s->pi->jedec >> 16) & 0xFF) == JEDEC_NUMONYX) {
/* Dummy cycles modeled with bytes writes instead of bits */
@@ -594,6 +634,7 @@ static void decode_new_cmd(Flash *s, uint32_t value)
break;
case DIOR:
+ case DIOR4:
switch ((s->pi->jedec >> 16) & 0xFF) {
case JEDEC_WINBOND:
case JEDEC_SPANSION:
@@ -610,6 +651,7 @@ static void decode_new_cmd(Flash *s, uint32_t value)
break;
case QIOR:
+ case QIOR4:
switch ((s->pi->jedec >> 16) & 0xFF) {
case JEDEC_WINBOND:
case JEDEC_SPANSION:
--
1.9.1
- [Qemu-devel] [PULL 11/17] block: m25p80: Implemented FSR register, (continued)
- [Qemu-devel] [PULL 11/17] block: m25p80: Implemented FSR register, Peter Maydell, 2016/03/30
- [Qemu-devel] [PULL 14/17] arm: qmp: add query-gic-capabilities interface, Peter Maydell, 2016/03/30
- [Qemu-devel] [PULL 13/17] block: m25p80: at25128a/at25256a models, Peter Maydell, 2016/03/30
- [Qemu-devel] [PULL 04/17] block: m25p80: RESET_ENABLE and RESET_MEMORY commands, Peter Maydell, 2016/03/30
- [Qemu-devel] [PULL 09/17] block: m25p80: Dummy cycles for N25Q256/512, Peter Maydell, 2016/03/30
- [Qemu-devel] [PULL 06/17] block: m25p80: Extend address mode, Peter Maydell, 2016/03/30
- [Qemu-devel] [PULL 08/17] block: m25p80: Add configuration registers, Peter Maydell, 2016/03/30
- [Qemu-devel] [PULL 07/17] block: m25p80: 4byte address mode, Peter Maydell, 2016/03/30
- [Qemu-devel] [PULL 05/17] block: m25p80: Widen flags variable, Peter Maydell, 2016/03/30
- [Qemu-devel] [PULL 16/17] kvm: add kvm_device_supported() helper function, Peter Maydell, 2016/03/30
- [Qemu-devel] [PULL 10/17] block: m25p80: Fast read and 4bytes commands,
Peter Maydell <=
- [Qemu-devel] [PULL 15/17] arm: enhance kvm_arm_create_scratch_host_vcpu, Peter Maydell, 2016/03/30
- [Qemu-devel] [PULL 01/17] hw/gpio: Add the emulation of gpio_key, Peter Maydell, 2016/03/30
- [Qemu-devel] [PULL 02/17] ARM: Virt: Use gpio_key for power button, Peter Maydell, 2016/03/30
- [Qemu-devel] [PULL 03/17] block: m25p80: Removed unused variable, Peter Maydell, 2016/03/30
- Re: [Qemu-devel] [PULL 00/17] target-arm queue, Peter Maydell, 2016/03/30