qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH 2/3] pcie: check that slt ctrl changed before de


From: Igor Mammedov
Subject: Re: [Qemu-devel] [PATCH 2/3] pcie: check that slt ctrl changed before deleting
Date: Mon, 1 Jul 2019 15:07:24 +0200

On Fri, 21 Jun 2019 02:46:48 -0400
"Michael S. Tsirkin" <address@hidden> wrote:

> During boot, linux would sometimes overwrites control of a powered off
> slot before powering it on. Unfortunately QEMU interprets that as a
> power off request and ejects the device.
> 
> For example:
> 
> /x86_64-softmmu/qemu-system-x86_64 -enable-kvm -S -machine q35  \
>     -device 
> pcie-root-port,id=pcie_root_port_0,slot=2,chassis=2,addr=0x2,bus=pcie.0 \
>     -monitor stdio disk.qcow2
> (qemu)device_add virtio-balloon-pci,id=balloon,bus=pcie_root_port_0
> (qemu)cont
> 
> Balloon is deleted during guest boot.
> 
> To fix, save control beforehand and check that power
> or led state actually change before ejecting.
> 
> Note: this is more a hack than a solution, ideally we'd
> find a better way to detect ejects, or move away
> from ejects completely and instead monitor whether
> it's safe to delete device due to e.g. its power state.
> 
> Signed-off-by: Michael S. Tsirkin <address@hidden>

Reviewed-by: Igor Mammedov <address@hidden>
Tested-by: Igor Mammedov <address@hidden>

> ---
>  include/hw/pci/pcie.h              |  3 ++-
>  hw/pci-bridge/pcie_root_port.c     |  5 ++++-
>  hw/pci-bridge/xio3130_downstream.c |  5 ++++-
>  hw/pci/pcie.c                      | 14 ++++++++++++--
>  4 files changed, 22 insertions(+), 5 deletions(-)
> 
> diff --git a/include/hw/pci/pcie.h b/include/hw/pci/pcie.h
> index e30334d74d..8d90c0e193 100644
> --- a/include/hw/pci/pcie.h
> +++ b/include/hw/pci/pcie.h
> @@ -107,7 +107,8 @@ void pcie_cap_lnkctl_reset(PCIDevice *dev);
>  
>  void pcie_cap_slot_init(PCIDevice *dev, uint16_t slot);
>  void pcie_cap_slot_reset(PCIDevice *dev);
> -void pcie_cap_slot_write_config(PCIDevice *dev,
> +void pcie_cap_slot_get(PCIDevice *dev, uint16_t *slot_ctl, uint16_t 
> *slt_sta);
> +void pcie_cap_slot_write_config(PCIDevice *dev, uint16_t slot_ctl, uint16_t 
> slt_sta,
>                                  uint32_t addr, uint32_t val, int len);
>  int pcie_cap_slot_post_load(void *opaque, int version_id);
>  void pcie_cap_slot_push_attention_button(PCIDevice *dev);
> diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c
> index 92f253c924..09019ca05d 100644
> --- a/hw/pci-bridge/pcie_root_port.c
> +++ b/hw/pci-bridge/pcie_root_port.c
> @@ -31,10 +31,13 @@ static void rp_write_config(PCIDevice *d, uint32_t 
> address,
>  {
>      uint32_t root_cmd =
>          pci_get_long(d->config + d->exp.aer_cap + PCI_ERR_ROOT_COMMAND);
> +    uint16_t slt_ctl, slt_sta;
> +
> +    pcie_cap_slot_get(d, &slt_ctl, &slt_sta);
>  
>      pci_bridge_write_config(d, address, val, len);
>      rp_aer_vector_update(d);
> -    pcie_cap_slot_write_config(d, address, val, len);
> +    pcie_cap_slot_write_config(d, slt_ctl, slt_sta, address, val, len);
>      pcie_aer_write_config(d, address, val, len);
>      pcie_aer_root_write_config(d, address, val, len, root_cmd);
>  }
> diff --git a/hw/pci-bridge/xio3130_downstream.c 
> b/hw/pci-bridge/xio3130_downstream.c
> index 264e37d6a6..899b0fd6c9 100644
> --- a/hw/pci-bridge/xio3130_downstream.c
> +++ b/hw/pci-bridge/xio3130_downstream.c
> @@ -41,9 +41,12 @@
>  static void xio3130_downstream_write_config(PCIDevice *d, uint32_t address,
>                                           uint32_t val, int len)
>  {
> +    uint16_t slt_ctl, slt_sta;
> +
> +    pcie_cap_slot_get(d, &slt_sta, &slt_ctl);
>      pci_bridge_write_config(d, address, val, len);
>      pcie_cap_flr_write_config(d, address, val, len);
> -    pcie_cap_slot_write_config(d, address, val, len);
> +    pcie_cap_slot_write_config(d, slt_ctl, slt_sta, address, val, len);
>      pcie_aer_write_config(d, address, val, len);
>  }
>  
> diff --git a/hw/pci/pcie.c b/hw/pci/pcie.c
> index b22527000d..f8490a00de 100644
> --- a/hw/pci/pcie.c
> +++ b/hw/pci/pcie.c
> @@ -594,7 +594,15 @@ void pcie_cap_slot_reset(PCIDevice *dev)
>      hotplug_event_update_event_status(dev);
>  }
>  
> -void pcie_cap_slot_write_config(PCIDevice *dev,
> +void pcie_cap_slot_get(PCIDevice *dev, uint16_t *slt_ctl, uint16_t *slt_sta)
> +{
> +    uint32_t pos = dev->exp.exp_cap;
> +    uint8_t *exp_cap = dev->config + pos;
> +    *slt_ctl = pci_get_word(exp_cap + PCI_EXP_SLTCTL);
> +    *slt_sta = pci_get_word(exp_cap + PCI_EXP_SLTSTA);
> +}
> +
> +void pcie_cap_slot_write_config(PCIDevice *dev, uint16_t slt_ctl, uint16_t 
> slt_sta,
>                                  uint32_t addr, uint32_t val, int len)
>  {
>      uint32_t pos = dev->exp.exp_cap;
> @@ -623,7 +631,9 @@ void pcie_cap_slot_write_config(PCIDevice *dev,
>       * controller is off, it is safe to detach the devices.
>       */
>      if ((sltsta & PCI_EXP_SLTSTA_PDS) && (val & PCI_EXP_SLTCTL_PCC) &&
> -        ((val & PCI_EXP_SLTCTL_PIC_OFF) == PCI_EXP_SLTCTL_PIC_OFF)) {
> +        (val & PCI_EXP_SLTCTL_PIC_OFF) == PCI_EXP_SLTCTL_PIC_OFF &&
> +        (!(slt_ctl & PCI_EXP_SLTCTL_PCC) ||
> +        (slt_ctl & PCI_EXP_SLTCTL_PIC_OFF) != PCI_EXP_SLTCTL_PIC_OFF)) {
>          PCIBus *sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(dev));
>          pci_for_each_device(sec_bus, pci_bus_num(sec_bus),
>                              pcie_unplug_device, NULL);




reply via email to

[Prev in Thread] Current Thread [Next in Thread]