Re: [Qemu-devel] [PATCH v7 04/13] vfio: Add save and load functions for VFIO PCI devices

[Dr. David Alan Gilbert]

* Alex Williamson (address@hidden) wrote:
> On Tue, 9 Jul 2019 15:19:11 +0530
> Kirti Wankhede <address@hidden> wrote:
> 
> > These functions save and restore PCI device specific data - config
> > space of PCI device.
> > Tested save and restore with MSI and MSIX type.
> > 
> > Signed-off-by: Kirti Wankhede <address@hidden>
> > Reviewed-by: Neo Jia <address@hidden>
> > ---
> >  hw/vfio/pci.c                 | 114 
> > ++++++++++++++++++++++++++++++++++++++++++
> >  include/hw/vfio/vfio-common.h |   2 +
> >  2 files changed, 116 insertions(+)
> > 
> > diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> > index de0d286fc9dd..5fe4f8076cac 100644
> > --- a/hw/vfio/pci.c
> > +++ b/hw/vfio/pci.c
> > @@ -2395,11 +2395,125 @@ static Object *vfio_pci_get_object(VFIODevice 
> > *vbasedev)
> >      return OBJECT(vdev);
> >  }
> >  
> > +static void vfio_pci_save_config(VFIODevice *vbasedev, QEMUFile *f)
> > +{
> > +    VFIOPCIDevice *vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
> > +    PCIDevice *pdev = &vdev->pdev;
> > +    uint16_t pci_cmd;
> > +    int i;
> > +
> > +    for (i = 0; i < PCI_ROM_SLOT; i++) {
> > +        uint32_t bar;
> > +
> > +        bar = pci_default_read_config(pdev, PCI_BASE_ADDRESS_0 + i * 4, 4);
> > +        qemu_put_be32(f, bar);
> > +    }
> > +
> > +    qemu_put_be32(f, vdev->interrupt);
> > +    if (vdev->interrupt == VFIO_INT_MSI) {
> > +        uint32_t msi_flags, msi_addr_lo, msi_addr_hi = 0, msi_data;
> > +        bool msi_64bit;
> > +
> > +        msi_flags = pci_default_read_config(pdev, pdev->msi_cap + 
> > PCI_MSI_FLAGS,
> > +                                            2);
> > +        msi_64bit = (msi_flags & PCI_MSI_FLAGS_64BIT);
> > +
> > +        msi_addr_lo = pci_default_read_config(pdev,
> > +                                         pdev->msi_cap + 
> > PCI_MSI_ADDRESS_LO, 4);
> > +        qemu_put_be32(f, msi_addr_lo);
> > +
> > +        if (msi_64bit) {
> > +            msi_addr_hi = pci_default_read_config(pdev,
> > +                                             pdev->msi_cap + 
> > PCI_MSI_ADDRESS_HI,
> > +                                             4);
> > +        }
> > +        qemu_put_be32(f, msi_addr_hi);
> > +
> > +        msi_data = pci_default_read_config(pdev,
> > +                pdev->msi_cap + (msi_64bit ? PCI_MSI_DATA_64 : 
> > PCI_MSI_DATA_32),
> > +                2);
> > +        qemu_put_be32(f, msi_data);
> > +    } else if (vdev->interrupt == VFIO_INT_MSIX) {
> > +        uint16_t offset;
> > +
> > +        /* save enable bit and maskall bit */
> > +        offset = pci_default_read_config(pdev,
> > +                                       pdev->msix_cap + PCI_MSIX_FLAGS + 
> > 1, 2);
> > +        qemu_put_be16(f, offset);
> > +        msix_save(pdev, f);
> > +    }
> > +    pci_cmd = pci_default_read_config(pdev, PCI_COMMAND, 2);
> > +    qemu_put_be16(f, pci_cmd);
> > +}
> > +
> > +static void vfio_pci_load_config(VFIODevice *vbasedev, QEMUFile *f)
> > +{
> > +    VFIOPCIDevice *vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
> > +    PCIDevice *pdev = &vdev->pdev;
> > +    uint32_t interrupt_type;
> > +    uint32_t msi_flags, msi_addr_lo, msi_addr_hi = 0, msi_data;
> > +    uint16_t pci_cmd;
> > +    bool msi_64bit;
> > +    int i;
> > +
> > +    /* retore pci bar configuration */
> > +    pci_cmd = pci_default_read_config(pdev, PCI_COMMAND, 2);
> > +    vfio_pci_write_config(pdev, PCI_COMMAND,
> > +                        pci_cmd & (!(PCI_COMMAND_IO | 
> > PCI_COMMAND_MEMORY)), 2);
> > +    for (i = 0; i < PCI_ROM_SLOT; i++) {
> > +        uint32_t bar = qemu_get_be32(f);
> > +
> > +        vfio_pci_write_config(pdev, PCI_BASE_ADDRESS_0 + i * 4, bar, 4);
> > +    }
> > +    vfio_pci_write_config(pdev, PCI_COMMAND,
> > +                          pci_cmd | PCI_COMMAND_IO | PCI_COMMAND_MEMORY, 
> > 2);
> > +
> > +    interrupt_type = qemu_get_be32(f);
> > +
> > +    if (interrupt_type == VFIO_INT_MSI) {
> > +        /* restore msi configuration */
> > +        msi_flags = pci_default_read_config(pdev,
> > +                                            pdev->msi_cap + PCI_MSI_FLAGS, 
> > 2);
> > +        msi_64bit = (msi_flags & PCI_MSI_FLAGS_64BIT);
> > +
> > +        vfio_pci_write_config(pdev, pdev->msi_cap + PCI_MSI_FLAGS,
> > +                              msi_flags & (!PCI_MSI_FLAGS_ENABLE), 2);
> > +
> > +        msi_addr_lo = qemu_get_be32(f);
> > +        vfio_pci_write_config(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_LO,
> > +                              msi_addr_lo, 4);
> > +
> > +        msi_addr_hi = qemu_get_be32(f);
> > +        if (msi_64bit) {
> > +            vfio_pci_write_config(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI,
> > +                                  msi_addr_hi, 4);
> > +        }
> > +        msi_data = qemu_get_be32(f);
> > +        vfio_pci_write_config(pdev,
> > +                pdev->msi_cap + (msi_64bit ? PCI_MSI_DATA_64 : 
> > PCI_MSI_DATA_32),
> > +                msi_data, 2);
> > +
> > +        vfio_pci_write_config(pdev, pdev->msi_cap + PCI_MSI_FLAGS,
> > +                              msi_flags | PCI_MSI_FLAGS_ENABLE, 2);
> > +    } else if (interrupt_type == VFIO_INT_MSIX) {
> > +        uint16_t offset = qemu_get_be16(f);
> > +
> > +        /* load enable bit and maskall bit */
> > +        vfio_pci_write_config(pdev, pdev->msix_cap + PCI_MSIX_FLAGS + 1,
> > +                              offset, 2);
> > +        msix_load(pdev, f);
> > +    }
> > +    pci_cmd = qemu_get_be16(f);
> > +    vfio_pci_write_config(pdev, PCI_COMMAND, pci_cmd, 2);
> > +}
> 
> Pardon my migration ignorance, but there are bound to be more fields
> and capabilities that get migrated over time.  How does this get
> extended to support that and maintain backwards compatibility?  Thanks,

You normally tie those fields to a property on your device and set the
property in the machine type so that newer machine types send the extra
fields.

Dave

> Alex
> 
> > +
> >  static VFIODeviceOps vfio_pci_ops = {
> >      .vfio_compute_needs_reset = vfio_pci_compute_needs_reset,
> >      .vfio_hot_reset_multi = vfio_pci_hot_reset_multi,
> >      .vfio_eoi = vfio_intx_eoi,
> >      .vfio_get_object = vfio_pci_get_object,
> > +    .vfio_save_config = vfio_pci_save_config,
> > +    .vfio_load_config = vfio_pci_load_config,
> >  };
> >  
> >  int vfio_populate_vga(VFIOPCIDevice *vdev, Error **errp)
> > diff --git a/include/hw/vfio/vfio-common.h b/include/hw/vfio/vfio-common.h
> > index 771b6d59a3db..ee72bd984a36 100644
> > --- a/include/hw/vfio/vfio-common.h
> > +++ b/include/hw/vfio/vfio-common.h
> > @@ -120,6 +120,8 @@ struct VFIODeviceOps {
> >      int (*vfio_hot_reset_multi)(VFIODevice *vdev);
> >      void (*vfio_eoi)(VFIODevice *vdev);
> >      Object *(*vfio_get_object)(VFIODevice *vdev);
> > +    void (*vfio_save_config)(VFIODevice *vdev, QEMUFile *f);
> > +    void (*vfio_load_config)(VFIODevice *vdev, QEMUFile *f);
> >  };
> >  
> >  typedef struct VFIOGroup {
> 
--
Dr. David Alan Gilbert / address@hidden / Manchester, UK