qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v3 15/15] target/arm/kvm: host cpu: Add support for


From: Andrew Jones
Subject: [Qemu-devel] [PATCH v3 15/15] target/arm/kvm: host cpu: Add support for sve<vl-bits> properties
Date: Fri, 2 Aug 2019 14:25:40 +0200

Allow cpu 'host' to enable SVE when it's available, unless the
user chooses to disable it with the added 'sve=off' cpu property.
Also give the user the ability to select vector lengths with the
sve<vl-bits> properties. We don't adopt 'max' cpu's other sve
property, sve-max-vq, because that property is difficult to
use with KVM. That property assumes all vector lengths in the
range from 1 up to and including the specified maximum length are
supported, but there may be optional lengths not supported by the
host in that range. With KVM one must be more specific when
enabling vector lengths.

Signed-off-by: Andrew Jones <address@hidden>
---
 docs/arm-cpu-features.rst | 19 ++++++++++++-------
 target/arm/cpu.c          |  1 +
 target/arm/cpu.h          |  2 ++
 target/arm/cpu64.c        | 39 +++++++++++++++++++++++----------------
 tests/arm-cpu-features.c  | 15 ++++++++-------
 5 files changed, 46 insertions(+), 30 deletions(-)

diff --git a/docs/arm-cpu-features.rst b/docs/arm-cpu-features.rst
index 4181539e06a5..dbf578ca231c 100644
--- a/docs/arm-cpu-features.rst
+++ b/docs/arm-cpu-features.rst
@@ -256,31 +256,36 @@ SVE CPU Property Examples
 
      $ qemu-system-aarch64 -M virt -cpu max
 
-  3) Only enable the 128-bit vector length::
+  3) When KVM is enabled, implicitly enable all host CPU supported vector
+     lengths with the `host` CPU type::
+
+     $ qemu-system-aarch64 -M virt,accel=kvm -cpu host
+
+  4) Only enable the 128-bit vector length::
 
      $ qemu-system-aarch64 -M virt -cpu max,sve128=on
 
-  4) Disable the 256-bit vector length and all larger vector lengths
+  5) Disable the 256-bit vector length and all larger vector lengths
      since 256 is a power-of-2 (this results in only the 128-bit length
      being enabled)::
 
      $ qemu-system-aarch64 -M virt -cpu max,sve256=off
 
-  5) Enable the 128-bit, 256-bit, and 512-bit vector lengths::
+  6) Enable the 128-bit, 256-bit, and 512-bit vector lengths::
 
      $ qemu-system-aarch64 -M virt -cpu max,sve128=on,sve256=on,sve512=on
 
-  6) The same as (5), but since the 128-bit and 256-bit vector
+  7) The same as (6), but since the 128-bit and 256-bit vector
      lengths are required for the 512-bit vector length to be enabled,
      then allow them to be auto-enabled::
 
      $ qemu-system-aarch64 -M virt -cpu max,sve512=on
 
-  7) Do the same as (6), but by first disabling SVE and then re-enabling it::
+  8) Do the same as (7), but by first disabling SVE and then re-enabling it::
 
      $ qemu-system-aarch64 -M virt -cpu max,sve=off,sve512=on,sve=on
 
-  8) Force errors regarding the last vector length::
+  9) Force errors regarding the last vector length::
 
      $ qemu-system-aarch64 -M virt -cpu max,sve128=off
      $ qemu-system-aarch64 -M virt -cpu max,sve=off,sve128=off,sve=on
@@ -292,5 +297,5 @@ The examples in "SVE CPU Property Examples" exhibit many 
ways to select
 vector lengths which developers may find useful in order to avoid overly
 verbose command lines.  However, the recommended way to select vector
 lengths is to explicitly enable each desired length.  Therefore only
-example's (1), (3), and (5) exhibit recommended uses of the properties.
+example's (1), (4), and (6) exhibit recommended uses of the properties.
 
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 842637ae0c49..901ae813563b 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -2648,6 +2648,7 @@ static void arm_host_initfn(Object *obj)
     ARMCPU *cpu = ARM_CPU(obj);
 
     kvm_arm_set_cpu_features_from_host(cpu);
+    aarch64_add_sve_properties(obj);
     arm_cpu_post_init(obj);
 }
 
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index b6cd721c91f5..7993085bea28 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -972,11 +972,13 @@ int aarch64_cpu_gdb_write_register(CPUState *cpu, uint8_t 
*buf, int reg);
 void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq);
 void aarch64_sve_change_el(CPUARMState *env, int old_el,
                            int new_el, bool el0_a64);
+void aarch64_add_sve_properties(Object *obj);
 #else
 static inline void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq) { }
 static inline void aarch64_sve_change_el(CPUARMState *env, int o,
                                          int n, bool a)
 { }
+static inline void aarch64_add_sve_properties(Object *obj) { }
 #endif
 
 #if !defined(CONFIG_TCG)
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index 0d0664b24865..0313eec88a66 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -714,6 +714,28 @@ static void cpu_arm_set_sve(Object *obj, Visitor *v, const 
char *name,
     }
 }
 
+void aarch64_add_sve_properties(Object *obj)
+{
+    ARMCPU *cpu = ARM_CPU(obj);
+    uint32_t vq;
+
+    object_property_add(obj, "sve", "bool", cpu_arm_get_sve,
+                        cpu_arm_set_sve, NULL, NULL, &error_fatal);
+
+    /*
+     * sve_vq_map uses a special state while setting properties, so
+     * we initialize it here with its init function and finalize it
+     * in arm_cpu_realizefn().
+     */
+    arm_cpu_vq_map_init(cpu);
+    for (vq = 1; vq <= ARM_MAX_VQ; ++vq) {
+        char name[8];
+        sprintf(name, "sve%d", vq * 128);
+        object_property_add(obj, name, "bool", cpu_arm_get_sve_vq,
+                            cpu_arm_set_sve_vq, NULL, NULL, &error_fatal);
+    }
+}
+
 /* -cpu max: if KVM is enabled, like -cpu host (best possible with this host);
  * otherwise, a CPU with as many features enabled as our emulation supports.
  * The version of '-cpu max' for qemu-system-arm is defined in cpu.c;
@@ -722,7 +744,6 @@ static void cpu_arm_set_sve(Object *obj, Visitor *v, const 
char *name,
 static void aarch64_max_initfn(Object *obj)
 {
     ARMCPU *cpu = ARM_CPU(obj);
-    uint32_t vq;
     uint64_t t;
 
     if (kvm_enabled()) {
@@ -813,23 +834,9 @@ static void aarch64_max_initfn(Object *obj)
 #endif
     }
 
-    object_property_add(obj, "sve", "bool", cpu_arm_get_sve,
-                        cpu_arm_set_sve, NULL, NULL, &error_fatal);
+    aarch64_add_sve_properties(obj);
     object_property_add(obj, "sve-max-vq", "uint32", cpu_max_get_sve_max_vq,
                         cpu_max_set_sve_max_vq, NULL, NULL, &error_fatal);
-
-    /*
-     * sve_vq_map uses a special state while setting properties, so
-     * we initialize it here with its init function and finalize it
-     * in arm_cpu_realizefn().
-     */
-    arm_cpu_vq_map_init(cpu);
-    for (vq = 1; vq <= ARM_MAX_VQ; ++vq) {
-        char name[8];
-        sprintf(name, "sve%d", vq * 128);
-        object_property_add(obj, name, "bool", cpu_arm_get_sve_vq,
-                            cpu_arm_set_sve_vq, NULL, NULL, &error_fatal);
-    }
 }
 
 struct ARMCPUInfo {
diff --git a/tests/arm-cpu-features.c b/tests/arm-cpu-features.c
index 720741375bc8..229f3cf64b12 100644
--- a/tests/arm-cpu-features.c
+++ b/tests/arm-cpu-features.c
@@ -359,7 +359,7 @@ static void sve_tests_sve_off_kvm(const void *data)
 {
     QTestState *qts;
 
-    qts = qtest_init(MACHINE "-accel kvm -cpu max,sve=off");
+    qts = qtest_init(MACHINE "-accel kvm -cpu host,sve=off");
 
     /*
      * We don't know if this host supports SVE so we don't
@@ -436,8 +436,8 @@ static void test_query_cpu_model_expansion_kvm(const void 
*data)
             "We cannot guarantee the CPU type 'cortex-a15' works "
             "with KVM on this host", NULL);
 
-        assert_has_feature(qts, "max", "sve");
-        resp = do_query_no_props(qts, "max");
+        assert_has_feature(qts, "host", "sve");
+        resp = do_query_no_props(qts, "host");
         kvm_supports_sve = resp_get_feature(resp, "sve");
         vls = resp_get_sve_vls(resp);
         qobject_unref(resp);
@@ -448,10 +448,10 @@ static void test_query_cpu_model_expansion_kvm(const void 
*data)
 
             /* Enabling a supported length is of course fine. */
             sprintf(name, "sve%d", max_vq * 128);
-            assert_sve_vls(qts, "max", vls, "{ %s: true }", name);
+            assert_sve_vls(qts, "host", vls, "{ %s: true }", name);
 
             /* Also disabling the largest lengths is fine. */
-            assert_sve_vls(qts, "max", (vls & ~BIT(max_vq - 1)),
+            assert_sve_vls(qts, "host", (vls & ~BIT(max_vq - 1)),
                            "{ %s: false }", name);
 
             for (vq = 1; vq <= max_vq; ++vq) {
@@ -463,7 +463,7 @@ static void test_query_cpu_model_expansion_kvm(const void 
*data)
             if (vq <= SVE_MAX_VQ) {
                 sprintf(name, "sve%d", vq * 128);
                 error = g_strdup_printf("cannot enable %s", name);
-                assert_error(qts, "max", error, "{ %s: true }", name);
+                assert_error(qts, "host", error, "{ %s: true }", name);
                 g_free(error);
             }
 
@@ -476,13 +476,14 @@ static void test_query_cpu_model_expansion_kvm(const void 
*data)
                 vq = 64 - __builtin_clzll(vls & ~BIT(max_vq - 1));
                 sprintf(name, "sve%d", vq * 128);
                 error = g_strdup_printf("cannot disable %s", name);
-                assert_error(qts, "max", error, "{ %s: false }", name);
+                assert_error(qts, "host", error, "{ %s: false }", name);
                 g_free(error);
             }
         } else {
             g_assert(vls == 0);
         }
     } else {
+        assert_has_not_feature(qts, "host", "sve");
         assert_error(qts, "host",
                      "'pmu' feature not supported by KVM on this host",
                      "{ 'pmu': true }");
-- 
2.20.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]