qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [Bug 1839807] [NEW] Snapshots freeze guest Sabrelite IMX.6


From: Al Sn
Subject: [Qemu-devel] [Bug 1839807] [NEW] Snapshots freeze guest Sabrelite IMX.6 board
Date: Mon, 12 Aug 2019 06:51:04 -0000

Public bug reported:

Hello,

I'm trying to take and restore  a snapshot with the whole system state of the 
Sabrelite IMX.6 board running on QEMU with commands savevm/loadvm.
It seems that I am able to take a snapshot but loading the snapshot fails.

For comparison I checked out snapshots on 32bit ARM Virt with Debian as well as 
on the Versatilepb board with a bare metal application and it works fine.
The problem occurs only with that one particular board.

My environment is:
Ubuntu 18.04
QEMU 3.0.1 (I see the same issue in QEMU 4.0.0 as well)
The kernel and device tree used for the board was 5.1.14 version from kernel.org

The file system was build from imx_v6_v7_defconfig config in buildroot
as and sd card image.

Problem:

Loading snapshot stops the whole machine and it's impossible to resume
it.

Steps to reproduce problem:

1.      I converted the sdcard.img built from the buildroot to qcow2
using command qemu-img convert -f raw -O qcow2 sdcard.img sdcard.qcow2,
since the raw doesn't support snapshots.

2.      I start QEMU with a command
./arm-softmmu/qemu-system-arm -m 512 -M sabrelite -kernel zImage -append 
"rootfstype=ext4 root=/dev/mmcblk2p2 rw rootwait" -rtc base=localtime,clock=vm 
-dtb imx6dl-sabresd.dtb -drive file=sdcard.qcow2,index=2,format=qcow2,id=mycard 
-device sd-card,drive=mycard -nographic -net nic -net user

3.      I run a simple program which print characters to the console in
the background and add some files in user directory, to differ from
original image.

4.      I switch to QEMU monitor, and type “savevm <name>”.
When I type “info snapshots”, the snapshot is listed.
So I assume it was saved correctly.

5.      Then I switch back to Linux console from monitor, remove the
added files and stop the background printing process.

6.      I switch back to monitor and I'm trying now to load the snapshot
by “loadvm <name>” command.

That’s where the problem occurs. QEMU stops and I can't switch back from 
monitor to Linux.
Typing “cont” doesn’t help.
It seems like the simulation has freezed. CPU usage on my Laptop machine equals 
100% until I exit QEMU.


What’s interesting when I exit the QEMU and then start it again the Linux boots 
and after it reaches the command prompt I can see the files which were removed 
after saving the snapshot.

It looks like loading the snapshots works for restoring disk space but
it fails for restoring the running processes.

Due to the answer on QEMU mailing list
(https://lists.nongnu.org/archive/html/qemu-
discuss/2019-08/msg00016.html) it is QEMUs bug.

** Affects: qemu
     Importance: Undecided
         Status: New


** Tags: snapshots

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1839807

Title:
  Snapshots freeze guest Sabrelite IMX.6 board

Status in QEMU:
  New

Bug description:
  Hello,

  I'm trying to take and restore  a snapshot with the whole system state of the 
Sabrelite IMX.6 board running on QEMU with commands savevm/loadvm.
  It seems that I am able to take a snapshot but loading the snapshot fails.

  For comparison I checked out snapshots on 32bit ARM Virt with Debian as well 
as on the Versatilepb board with a bare metal application and it works fine.
  The problem occurs only with that one particular board.

  My environment is:
  Ubuntu 18.04
  QEMU 3.0.1 (I see the same issue in QEMU 4.0.0 as well)
  The kernel and device tree used for the board was 5.1.14 version from 
kernel.org

  The file system was build from imx_v6_v7_defconfig config in buildroot
  as and sd card image.

  Problem:

  Loading snapshot stops the whole machine and it's impossible to resume
  it.

  Steps to reproduce problem:

  1.      I converted the sdcard.img built from the buildroot to qcow2
  using command qemu-img convert -f raw -O qcow2 sdcard.img
  sdcard.qcow2, since the raw doesn't support snapshots.

  2.      I start QEMU with a command
  ./arm-softmmu/qemu-system-arm -m 512 -M sabrelite -kernel zImage -append 
"rootfstype=ext4 root=/dev/mmcblk2p2 rw rootwait" -rtc base=localtime,clock=vm 
-dtb imx6dl-sabresd.dtb -drive file=sdcard.qcow2,index=2,format=qcow2,id=mycard 
-device sd-card,drive=mycard -nographic -net nic -net user

  3.      I run a simple program which print characters to the console
  in the background and add some files in user directory, to differ from
  original image.

  4.      I switch to QEMU monitor, and type “savevm <name>”.
  When I type “info snapshots”, the snapshot is listed.
  So I assume it was saved correctly.

  5.      Then I switch back to Linux console from monitor, remove the
  added files and stop the background printing process.

  6.      I switch back to monitor and I'm trying now to load the
  snapshot by “loadvm <name>” command.

  That’s where the problem occurs. QEMU stops and I can't switch back from 
monitor to Linux.
  Typing “cont” doesn’t help.
  It seems like the simulation has freezed. CPU usage on my Laptop machine 
equals 100% until I exit QEMU.

  
  What’s interesting when I exit the QEMU and then start it again the Linux 
boots and after it reaches the command prompt I can see the files which were 
removed after saving the snapshot.

  It looks like loading the snapshots works for restoring disk space but
  it fails for restoring the running processes.

  Due to the answer on QEMU mailing list
  (https://lists.nongnu.org/archive/html/qemu-
  discuss/2019-08/msg00016.html) it is QEMUs bug.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1839807/+subscriptions



reply via email to

[Prev in Thread] Current Thread [Next in Thread]