qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v4 2/6] m68k: Add NeXTcube keyboard device


From: Philippe Mathieu-Daudé
Subject: Re: [Qemu-devel] [PATCH v4 2/6] m68k: Add NeXTcube keyboard device
Date: Tue, 13 Aug 2019 12:13:13 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.7.0

On 7/9/19 9:32 AM, Thomas Huth wrote:
> It is likely still quite incomplete (e.g. mouse and interrupts are not
> implemented yet), but it is good enough for keyboard input at the firmware
> monitor.
> This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at
> 
>  https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-kbd.c
> 
> and altered to fit the latest interface of the current QEMU (e.g. to use
> memory_region_init_io() instead of cpu_register_physical_memory()).
> 
> Signed-off-by: Thomas Huth <address@hidden>
> ---
>  hw/m68k/Makefile.objs       |   1 +
>  hw/m68k/next-kbd.c          | 284 ++++++++++++++++++++++++++++++++++++
>  include/hw/m68k/next-cube.h |   2 +
>  3 files changed, 287 insertions(+)
>  create mode 100644 hw/m68k/next-kbd.c
> 
> diff --git a/hw/m68k/Makefile.objs b/hw/m68k/Makefile.objs
> index 482f8477b4..688002cac1 100644
> --- a/hw/m68k/Makefile.objs
> +++ b/hw/m68k/Makefile.objs
> @@ -1,2 +1,3 @@
>  obj-$(CONFIG_AN5206) += an5206.o mcf5206.o
>  obj-$(CONFIG_MCF5208) += mcf5208.o mcf_intc.o
> +obj-$(CONFIG_NEXTCUBE) += next-kbd.o
> diff --git a/hw/m68k/next-kbd.c b/hw/m68k/next-kbd.c
> new file mode 100644
> index 0000000000..c866562382
> --- /dev/null
> +++ b/hw/m68k/next-kbd.c
> @@ -0,0 +1,284 @@
> +/*
> + * QEMU NeXT Keyboard/Mouse emulation
> + *
> + * Copyright (c) 2011 Bryce Lanham
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a 
> copy
> + * of this software and associated documentation files (the "Software"), to 
> deal
> + * in the Software without restriction, including without limitation the 
> rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
> FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +/*
> + * This is admittedly hackish, but works well enough for basic input. Mouse
> + * support will be added once we can boot something that needs the mouse.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu/log.h"
> +#include "exec/address-spaces.h"
> +#include "hw/hw.h"
> +#include "hw/sysbus.h"
> +#include "hw/m68k/next-cube.h"
> +#include "ui/console.h"
> +#include "sysemu/sysemu.h"
> +
> +#define NEXTKBD(obj) OBJECT_CHECK(NextKBDState, (obj), TYPE_NEXTKBD)
> +
> +/* following defintions from next68k netbsd */
> +#define CSR_INT 0x00800000
> +#define CSR_DATA 0x00400000
> +
> +#define KD_KEYMASK    0x007f
> +#define KD_DIRECTION  0x0080 /* pressed or released */
> +#define KD_CNTL       0x0100
> +#define KD_LSHIFT     0x0200
> +#define KD_RSHIFT     0x0400
> +#define KD_LCOMM      0x0800
> +#define KD_RCOMM      0x1000
> +#define KD_LALT       0x2000
> +#define KD_RALT       0x4000
> +#define KD_VALID      0x8000 /* only set for scancode keys ? */
> +#define KD_MODS       0x4f00
> +
> +#define KBD_QUEUE_SIZE 256
> +
> +typedef struct {
> +    uint8_t data[KBD_QUEUE_SIZE];
> +    int rptr, wptr, count;
> +} KBDQueue;
> +
> +
> +typedef struct NextKBDState {
> +    SysBusDevice sbd;
> +    MemoryRegion mr;
> +    KBDQueue queue;
> +    uint16_t shift;
> +} NextKBDState;
> +
> +static void queue_code(void *opaque, int code);
> +
> +/* lots of magic numbers here */
> +static uint32_t kbd_read_byte(void *opaque, hwaddr addr)
> +{
> +    switch (addr & 0x3) {
> +    case 0x0:   /* 0xe000 */
> +        return 0x80 | 0x20;
> +
> +    case 0x1:   /* 0xe001 */
> +        return 0x80 | 0x40 | 0x20 | 0x10;
> +
> +    case 0x2:   /* 0xe002 */
> +        /* returning 0x40 caused mach to hang */
> +        return 0x10 | 0x2 | 0x1;
> +
> +    default:
> +        qemu_log_mask(LOG_UNIMP, "NeXT kbd read byte %"HWADDR_PRIx"\n", 
> addr);
> +    }
> +
> +    return 0;
> +}
> +
> +static uint32_t kbd_read_word(void *opaque, hwaddr addr)
> +{

Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
Tested-by: Philippe Mathieu-Daudé <address@hidden>

> +    qemu_log_mask(LOG_UNIMP, "NeXT kbd read word %"HWADDR_PRIx"\n", addr);
> +    return 0;
> +}
> +
> +/* even more magic numbers */
> +static uint32_t kbd_read_long(void *opaque, hwaddr addr)
> +{
> +    int key = 0;
> +    NextKBDState *s = NEXTKBD(opaque);
> +    KBDQueue *q = &s->queue;
> +
> +    switch (addr & 0xf) {
> +    case 0x0:   /* 0xe000 */
> +        return 0xA0F09300;
> +
> +    case 0x8:   /* 0xe008 */
> +        /* get keycode from buffer */
> +        if (q->count > 0) {
> +            key = q->data[q->rptr];
> +            if (++q->rptr == KBD_QUEUE_SIZE) {
> +                q->rptr = 0;
> +            }
> +
> +            q->count--;
> +
> +            if (s->shift) {
> +                key |= s->shift;
> +            }
> +
> +            if (key & 0x80) {
> +                return 0;
> +            } else {
> +                return 0x10000000 | KD_VALID | key;
> +            }
> +        } else {
> +            return 0;
> +        }
> +
> +    default:
> +        qemu_log_mask(LOG_UNIMP, "NeXT kbd read long %"HWADDR_PRIx"\n", 
> addr);
> +        return 0;
> +    }
> +}
> +
> +static uint64_t kbd_readfn(void *opaque, hwaddr addr, unsigned size)
> +{
> +    switch (size) {
> +    case 1:
> +        return kbd_read_byte(opaque, addr);
> +    case 2:
> +        return kbd_read_word(opaque, addr);
> +    case 4:
> +        return kbd_read_long(opaque, addr);
> +    default:
> +        g_assert_not_reached();
> +    }
> +}
> +
> +static void kbd_writefn(void *opaque, hwaddr addr, uint64_t value,
> +                        unsigned size)
> +{
> +    qemu_log_mask(LOG_UNIMP, "NeXT kbd write: size=%u addr=0x%"HWADDR_PRIx
> +                  "val=0x%"PRIx64"\n", size, addr, value);
> +}
> +
> +static const MemoryRegionOps kbd_ops = {
> +    .read = kbd_readfn,
> +    .write = kbd_writefn,
> +    .valid.min_access_size = 1,
> +    .valid.max_access_size = 4,
> +    .endianness = DEVICE_NATIVE_ENDIAN,
> +};
> +
> +static void nextkbd_event(void *opaque, int ch)
> +{
> +    /*
> +     * Will want to set vars for caps/num lock
> +     * if (ch & 0x80) -> key release
> +     * there's also e0 escaped scancodes that might need to be handled
> +     */
> +    queue_code(opaque, ch);
> +}
> +
> +static const unsigned char next_keycodes[128] = {
> +    0x00, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x50, 0x4F,
> +    0x4E, 0x1E, 0x1F, 0x20, 0x1D, 0x1C, 0x1B, 0x00,
> +    0x42, 0x43, 0x44, 0x45, 0x48, 0x47, 0x46, 0x06,
> +    0x07, 0x08, 0x00, 0x00, 0x2A, 0x00, 0x39, 0x3A,
> +    0x3B, 0x3C, 0x3D, 0x40, 0x3F, 0x3E, 0x2D, 0x2C,
> +    0x2B, 0x26, 0x00, 0x00, 0x31, 0x32, 0x33, 0x34,
> +    0x35, 0x37, 0x36, 0x2e, 0x2f, 0x30, 0x00, 0x00,
> +    0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
> +    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
> +    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
> +    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
> +};
> +
> +static void queue_code(void *opaque, int code)
> +{
> +    NextKBDState *s = NEXTKBD(opaque);
> +    KBDQueue *q = &s->queue;
> +    int key = code & KD_KEYMASK;
> +    int release = code & 0x80;
> +    static int ext;
> +
> +    if (code == 0xE0) {
> +        ext = 1;
> +    }
> +
> +    if (code == 0x2A || code == 0x1D || code == 0x36) {
> +        if (code == 0x2A) {
> +            s->shift = KD_LSHIFT;
> +        } else if (code == 0x36) {
> +            s->shift = KD_RSHIFT;
> +            ext = 0;
> +        } else if (code == 0x1D && !ext) {
> +            s->shift = KD_LCOMM;
> +        } else if (code == 0x1D && ext) {
> +            ext = 0;
> +            s->shift = KD_RCOMM;
> +        }
> +        return;
> +    } else if (code == (0x2A | 0x80) || code == (0x1D | 0x80) ||
> +               code == (0x36 | 0x80)) {
> +        s->shift = 0;
> +        return;
> +    }
> +
> +    if (q->count >= KBD_QUEUE_SIZE) {
> +        return;
> +    }
> +
> +    q->data[q->wptr] = next_keycodes[key] | release;
> +
> +    if (++q->wptr == KBD_QUEUE_SIZE) {
> +        q->wptr = 0;
> +    }
> +
> +    q->count++;
> +
> +    /*
> +     * might need to actually trigger the NeXT irq, but as the keyboard works
> +     * at the moment, I'll worry about it later
> +     */
> +    /* s->update_irq(s->update_arg, 1); */
> +}
> +
> +static void nextkbd_reset(DeviceState *dev)
> +{
> +    NextKBDState *nks = NEXTKBD(dev);
> +
> +    memset(&nks->queue, 0, sizeof(KBDQueue));
> +    nks->shift = 0;
> +}
> +
> +static void nextkbd_realize(DeviceState *dev, Error **errp)
> +{
> +    NextKBDState *s = NEXTKBD(dev);
> +
> +    memory_region_init_io(&s->mr, OBJECT(dev), &kbd_ops, s, "next.kbd", 
> 0x1000);
> +    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mr);
> +
> +    qemu_add_kbd_event_handler(nextkbd_event, s);
> +}
> +
> +static void nextkbd_class_init(ObjectClass *oc, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(oc);
> +
> +    set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
> +    dc->realize = nextkbd_realize;
> +    dc->reset = nextkbd_reset;
> +}
> +
> +static const TypeInfo nextkbd_info = {
> +    .name          = TYPE_NEXTKBD,
> +    .parent        = TYPE_SYS_BUS_DEVICE,
> +    .instance_size = sizeof(NextKBDState),
> +    .class_init    = nextkbd_class_init,
> +};
> +
> +static void nextkbd_register_types(void)
> +{
> +    type_register_static(&nextkbd_info);
> +}
> +
> +type_init(nextkbd_register_types)
> diff --git a/include/hw/m68k/next-cube.h b/include/hw/m68k/next-cube.h
> index 090c7c51aa..37f7ce3e34 100644
> --- a/include/hw/m68k/next-cube.h
> +++ b/include/hw/m68k/next-cube.h
> @@ -4,4 +4,6 @@
>  
>  #define TYPE_NEXTFB "next-fb"
>  
> +#define TYPE_NEXTKBD "next-kbd"
> +
>  #endif /* NEXT_CUBE_H */
> 



reply via email to

[Prev in Thread] Current Thread [Next in Thread]