[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH 10/15] s390x: protvirt: Add new VCPU reset functions
From: |
Janosch Frank |
Subject: |
[PATCH 10/15] s390x: protvirt: Add new VCPU reset functions |
Date: |
Wed, 20 Nov 2019 06:43:29 -0500 |
CPU resets for protected guests need to be done via Ultravisor
calls. Hence we need a way to issue these calls for each reset.
As we formerly had only one reset function and it was called for
initial, as well as for the clear reset, we now need a new interface.
Signed-off-by: Janosch Frank <address@hidden>
---
target/s390x/cpu.c | 15 ++++++++++++---
target/s390x/kvm-stub.c | 10 +++++++++-
target/s390x/kvm.c | 38 ++++++++++++++++++++++++++++++++------
target/s390x/kvm_s390x.h | 4 +++-
4 files changed, 56 insertions(+), 11 deletions(-)
diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c
index 10d5b915d8..ac04fdbba9 100644
--- a/target/s390x/cpu.c
+++ b/target/s390x/cpu.c
@@ -125,9 +125,18 @@ static void s390_cpu_reset(CPUState *s, uint8_t type)
}
/* Reset state inside the kernel that we cannot access yet from QEMU. */
- if (kvm_enabled() && (type == S390_CPU_RESET_CLEAR ||
- type == S390_CPU_RESET_INITIAL)) {
- kvm_s390_reset_vcpu(cpu);
+ if (kvm_enabled()) {
+ switch (type) {
+ case S390_CPU_RESET_CLEAR:
+ kvm_s390_reset_vcpu_clear(cpu);
+ break;
+ case S390_CPU_RESET_INITIAL:
+ kvm_s390_reset_vcpu_initial(cpu);
+ break;
+ case S390_CPU_RESET_NORMAL:
+ kvm_s390_reset_vcpu_normal(cpu);
+ break;
+ }
}
#if defined(CONFIG_USER_ONLY)
diff --git a/target/s390x/kvm-stub.c b/target/s390x/kvm-stub.c
index 5152e2bdf1..c4cd497f85 100644
--- a/target/s390x/kvm-stub.c
+++ b/target/s390x/kvm-stub.c
@@ -83,7 +83,15 @@ void kvm_s390_cmma_reset(void)
{
}
-void kvm_s390_reset_vcpu(S390CPU *cpu)
+void kvm_s390_reset_vcpu_initial(S390CPU *cpu)
+{
+}
+
+void kvm_s390_reset_vcpu_clear(S390CPU *cpu)
+{
+}
+
+void kvm_s390_reset_vcpu_normal(S390CPU *cpu)
{
}
diff --git a/target/s390x/kvm.c b/target/s390x/kvm.c
index 0f2458b553..190400df55 100644
--- a/target/s390x/kvm.c
+++ b/target/s390x/kvm.c
@@ -154,6 +154,7 @@ static int cap_ri;
static int cap_gs;
static int cap_hpage_1m;
static int cap_protvirt;
+static int cap_vcpu_resets;
static int active_cmma;
@@ -340,6 +341,7 @@ int kvm_arch_init(MachineState *ms, KVMState *s)
cap_mem_op = kvm_check_extension(s, KVM_CAP_S390_MEM_OP);
cap_s390_irq = kvm_check_extension(s, KVM_CAP_S390_INJECT_IRQ);
cap_protvirt = kvm_check_extension(s, KVM_CAP_S390_PROTECTED);
+ cap_vcpu_resets = kvm_check_extension(s, KVM_CAP_S390_VCPU_RESETS);
if (!kvm_check_extension(s, KVM_CAP_S390_GMAP)
|| !kvm_check_extension(s, KVM_CAP_S390_COW)) {
@@ -401,20 +403,44 @@ int kvm_arch_destroy_vcpu(CPUState *cs)
return 0;
}
-void kvm_s390_reset_vcpu(S390CPU *cpu)
+static void kvm_s390_reset_vcpu(S390CPU *cpu, unsigned long type)
{
CPUState *cs = CPU(cpu);
- /* The initial reset call is needed here to reset in-kernel
- * vcpu data that we can't access directly from QEMU
- * (i.e. with older kernels which don't support sync_regs/ONE_REG).
- * Before this ioctl cpu_synchronize_state() is called in common kvm
- * code (kvm-all) */
+ /*
+ * The reset call is needed here to reset in-kernel vcpu data that
+ * we can't access directly from QEMU (i.e. with older kernels
+ * which don't support sync_regs/ONE_REG). Before this ioctl
+ * cpu_synchronize_state() is called in common kvm code
+ * (kvm-all).
+ */
+ if (cap_vcpu_resets) {
+ if (kvm_vcpu_ioctl(cs, KVM_S390_VCPU_RESET, type)) {
+ error_report("CPU reset type %ld failed on CPU %i",
+ type, cs->cpu_index);
+ }
+ return;
+ }
if (kvm_vcpu_ioctl(cs, KVM_S390_INITIAL_RESET, NULL)) {
error_report("Initial CPU reset failed on CPU %i", cs->cpu_index);
}
}
+void kvm_s390_reset_vcpu_initial(S390CPU *cpu)
+{
+ kvm_s390_reset_vcpu(cpu, KVM_S390_VCPU_RESET_INITIAL);
+}
+
+void kvm_s390_reset_vcpu_clear(S390CPU *cpu)
+{
+ kvm_s390_reset_vcpu(cpu, KVM_S390_VCPU_RESET_CLEAR);
+}
+
+void kvm_s390_reset_vcpu_normal(S390CPU *cpu)
+{
+ kvm_s390_reset_vcpu(cpu, KVM_S390_VCPU_RESET_NORMAL);
+}
+
static int can_sync_regs(CPUState *cs, int regs)
{
return cap_sync_regs && (cs->kvm_run->kvm_valid_regs & regs) == regs;
diff --git a/target/s390x/kvm_s390x.h b/target/s390x/kvm_s390x.h
index caf985955b..0b21789796 100644
--- a/target/s390x/kvm_s390x.h
+++ b/target/s390x/kvm_s390x.h
@@ -34,7 +34,9 @@ int kvm_s390_assign_subch_ioeventfd(EventNotifier *notifier,
uint32_t sch,
int vq, bool assign);
int kvm_s390_cmma_active(void);
void kvm_s390_cmma_reset(void);
-void kvm_s390_reset_vcpu(S390CPU *cpu);
+void kvm_s390_reset_vcpu_clear(S390CPU *cpu);
+void kvm_s390_reset_vcpu_normal(S390CPU *cpu);
+void kvm_s390_reset_vcpu_initial(S390CPU *cpu);
int kvm_s390_set_mem_limit(uint64_t new_limit, uint64_t *hw_limit);
void kvm_s390_set_max_pagesize(uint64_t pagesize, Error **errp);
void kvm_s390_crypto_reset(void);
--
2.20.1
- [PATCH 12/15] s390x: protvirt: Set guest IPL PSW, (continued)
[PATCH 10/15] s390x: protvirt: Add new VCPU reset functions,
Janosch Frank <=
[PATCH 13/15] s390x: protvirt: Move diag 308 data over SIDAD, Janosch Frank, 2019/11/20
[PATCH 15/15] s390x: protvirt: Handle SIGP store status correctly, Janosch Frank, 2019/11/20
[PATCH 11/15] RFC: s390x: Exit on vcpu reset error, Janosch Frank, 2019/11/20