Re: [PATCH v17 09/14] numa: Extend CLI to provide memory side cache information

[Igor Mammedov]

On Fri, 22 Nov 2019 15:48:21 +0800
Tao Xu <address@hidden> wrote:

> From: Liu Jingqi <address@hidden>
> 
> Add -numa hmat-cache option to provide Memory Side Cache Information.
> These memory attributes help to build Memory Side Cache Information
> Structure(s) in ACPI Heterogeneous Memory Attribute Table (HMAT).
> 
> Reviewed-by: Daniel Black <address@hidden>
> Signed-off-by: Liu Jingqi <address@hidden>
> Signed-off-by: Tao Xu <address@hidden>

with nit below fixed:
 Reviewed-by: Igor Mammedov <address@hidden>



> ---
> 
> Changes in v17:
>     - Use NumaHmatCacheOptions to replace HMAT_Cache_Info (Igor)
>     - Add check for unordered cache level input (Igor)
> 
> Changes in v16:
>     - Add cross check with hmat_lb data (Igor)
>     - Drop total_levels in struct HMAT_Cache_Info (Igor)
>     - Correct the error table number (Igor)
> 
> Changes in v15:
>     - Change the QAPI version tag to 5.0 (Eric)
> ---
>  hw/core/numa.c        | 78 +++++++++++++++++++++++++++++++++++++++++++
>  include/sysemu/numa.h |  5 +++
>  qapi/machine.json     | 78 +++++++++++++++++++++++++++++++++++++++++--
>  qemu-options.hx       | 16 +++++++--
>  4 files changed, 173 insertions(+), 4 deletions(-)
> 
> diff --git a/hw/core/numa.c b/hw/core/numa.c
> index 70bc8a1081..7b1a9531d2 100644
> --- a/hw/core/numa.c
> +++ b/hw/core/numa.c
> @@ -363,6 +363,71 @@ void parse_numa_hmat_lb(NumaState *numa_state, 
> NumaHmatLBOptions *node,
>      g_array_append_val(hmat_lb->list, lb_data);
>  }
>  
> +void parse_numa_hmat_cache(MachineState *ms, NumaHmatCacheOptions *node,
> +                           Error **errp)
> +{
> +    int nb_numa_nodes = ms->numa_state->num_nodes;
> +    NodeInfo *numa_info = ms->numa_state->nodes;
> +    NumaHmatCacheOptions *hmat_cache = NULL;
> +
> +    if (node->node_id >= nb_numa_nodes) {
> +        error_setg(errp, "Invalid node-id=%" PRIu32 ", it should be less "
> +                   "than %d", node->node_id, nb_numa_nodes);
> +        return;
> +    }
> +
> +    if (numa_info[node->node_id].lb_info_provided != (BIT(0) | BIT(1))) {
> +        error_setg(errp, "The latency and bandwidth information of "
> +                   "node-id=%" PRIu32 " should be provided before memory 
> side "
> +                   "cache attributes", node->node_id);
> +        return;
> +    }
> +
> +    if (node->level >= HMAT_LB_LEVELS) {
> +        error_setg(errp, "Invalid level=%" PRIu8 ", it should be less than 
> or "
> +                   "equal to %d", node->level, HMAT_LB_LEVELS - 1);
> +        return;
> +    }
> +    assert(node->assoc < HMAT_CACHE_ASSOCIATIVITY__MAX);
> +    assert(node->policy < HMAT_CACHE_WRITE_POLICY__MAX);
> +    if (ms->numa_state->hmat_cache[node->node_id][node->level]) {
> +        error_setg(errp, "Duplicate configuration of the side cache for "
> +                   "node-id=%" PRIu32 " and level=%" PRIu8,
> +                   node->node_id, node->level);
> +        return;
> +    }
> +
> +    if ((node->level > 1) &&
> +        ms->numa_state->hmat_cache[node->node_id][node->level - 1] &&
> +        (node->size >=
> +            ms->numa_state->hmat_cache[node->node_id][node->level - 
> 1]->size)) {
> +        error_setg(errp, "Invalid size=%" PRIu64 ", the size of level=%" 
> PRIu8
> +                   " should be small than the size(%" PRIu64 ") of "

s/small/less/

> +                   "level=%" PRIu8, node->size, node->level,
> +                   ms->numa_state->hmat_cache[node->node_id]
> +                                             [node->level - 1]->size,
> +                   node->level - 1);
> +        return;
> +    }
> +
> +    if ((node->level < HMAT_LB_LEVELS - 1) &&
> +        ms->numa_state->hmat_cache[node->node_id][node->level + 1] &&
> +        (node->size <=
> +            ms->numa_state->hmat_cache[node->node_id][node->level + 
> 1]->size)) {
> +        error_setg(errp, "Invalid size=%" PRIu64 ", the size of level=%" 
> PRIu8
> +                   " should be larger than the size(%" PRIu64 ") of "
> +                   "level=%" PRIu8, node->size, node->level,
> +                   ms->numa_state->hmat_cache[node->node_id]
> +                                             [node->level + 1]->size,
> +                   node->level + 1);
> +        return;
> +    }
> +
> +    hmat_cache = g_malloc0(sizeof(*hmat_cache));
> +    memcpy(hmat_cache, node, sizeof(*hmat_cache));
> +    ms->numa_state->hmat_cache[node->node_id][node->level] = hmat_cache;
> +}
> +
>  void set_numa_options(MachineState *ms, NumaOptions *object, Error **errp)
>  {
>      Error *err = NULL;
> @@ -414,6 +479,19 @@ void set_numa_options(MachineState *ms, NumaOptions 
> *object, Error **errp)
>              goto end;
>          }
>          break;
> +    case NUMA_OPTIONS_TYPE_HMAT_CACHE:
> +        if (!ms->numa_state->hmat_enabled) {
> +            error_setg(errp, "ACPI Heterogeneous Memory Attribute Table "
> +                       "(HMAT) is disabled, enable it with -machine hmat=on "
> +                       "before using any of hmat specific options");
> +            return;
> +        }
> +
> +        parse_numa_hmat_cache(ms, &object->u.hmat_cache, &err);
> +        if (err) {
> +            goto end;
> +        }
> +        break;
>      default:
>          abort();
>      }
> diff --git a/include/sysemu/numa.h b/include/sysemu/numa.h
> index 70f93c83d7..ba693cc80b 100644
> --- a/include/sysemu/numa.h
> +++ b/include/sysemu/numa.h
> @@ -91,6 +91,9 @@ struct NumaState {
>  
>      /* NUMA nodes HMAT Locality Latency and Bandwidth Information */
>      HMAT_LB_Info *hmat_lb[HMAT_LB_LEVELS][HMAT_LB_TYPES];
> +
> +    /* Memory Side Cache Information Structure */
> +    NumaHmatCacheOptions *hmat_cache[MAX_NODES][HMAT_LB_LEVELS];
>  };
>  typedef struct NumaState NumaState;
>  
> @@ -98,6 +101,8 @@ void set_numa_options(MachineState *ms, NumaOptions 
> *object, Error **errp);
>  void parse_numa_opts(MachineState *ms);
>  void parse_numa_hmat_lb(NumaState *numa_state, NumaHmatLBOptions *node,
>                          Error **errp);
> +void parse_numa_hmat_cache(MachineState *ms, NumaHmatCacheOptions *node,
> +                           Error **errp);
>  void numa_complete_configuration(MachineState *ms);
>  void query_numa_node_mem(NumaNodeMem node_mem[], MachineState *ms);
>  extern QemuOptsList qemu_numa_opts;
> diff --git a/qapi/machine.json b/qapi/machine.json
> index 67f5910400..999235bc1b 100644
> --- a/qapi/machine.json
> +++ b/qapi/machine.json
> @@ -428,10 +428,12 @@
>  #
>  # @hmat-lb: memory latency and bandwidth information (Since: 5.0)
>  #
> +# @hmat-cache: memory side cache information (Since: 5.0)
> +#
>  # Since: 2.1
>  ##
>  { 'enum': 'NumaOptionsType',
> -  'data': [ 'node', 'dist', 'cpu', 'hmat-lb' ] }
> +  'data': [ 'node', 'dist', 'cpu', 'hmat-lb', 'hmat-cache' ] }
>  
>  ##
>  # @NumaOptions:
> @@ -447,7 +449,8 @@
>      'node': 'NumaNodeOptions',
>      'dist': 'NumaDistOptions',
>      'cpu': 'NumaCpuOptions',
> -    'hmat-lb': 'NumaHmatLBOptions' }}
> +    'hmat-lb': 'NumaHmatLBOptions',
> +    'hmat-cache': 'NumaHmatCacheOptions' }}
>  
>  ##
>  # @NumaNodeOptions:
> @@ -647,6 +650,77 @@
>      '*latency': 'time',
>      '*bandwidth': 'size' }}
>  
> +##
> +# @HmatCacheAssociativity:
> +#
> +# Cache associativity in the Memory Side Cache
> +# Information Structure of HMAT
> +#
> +# For more information of @HmatCacheAssociativity see
> +# the chapter 5.2.27.5: Table 5-147 of ACPI 6.3 spec.
> +#
> +# @none: None
> +#
> +# @direct: Direct Mapped
> +#
> +# @complex: Complex Cache Indexing (implementation specific)
> +#
> +# Since: 5.0
> +##
> +{ 'enum': 'HmatCacheAssociativity',
> +  'data': [ 'none', 'direct', 'complex' ] }
> +
> +##
> +# @HmatCacheWritePolicy:
> +#
> +# Cache write policy in the Memory Side Cache
> +# Information Structure of HMAT
> +#
> +# For more information of @HmatCacheWritePolicy see
> +# the chapter 5.2.27.5: Table 5-147: Field "Cache Attributes" of ACPI 6.3 
> spec.
> +#
> +# @none: None
> +#
> +# @write-back: Write Back (WB)
> +#
> +# @write-through: Write Through (WT)
> +#
> +# Since: 5.0
> +##
> +{ 'enum': 'HmatCacheWritePolicy',
> +  'data': [ 'none', 'write-back', 'write-through' ] }
> +
> +##
> +# @NumaHmatCacheOptions:
> +#
> +# Set the memory side cache information for a given memory domain.
> +#
> +# For more information of @NumaHmatCacheOptions see
> +# the chapter 5.2.27.5: Table 5-147: Field "Cache Attributes" of ACPI 6.3 
> spec.
> +#
> +# @node-id: the memory proximity domain to which the memory belongs.
> +#
> +# @size: the size of memory side cache in bytes.
> +#
> +# @level: the cache level described in this structure.
> +#
> +# @assoc: the cache associativity, none/direct-mapped/complex(complex cache 
> indexing).
> +#
> +# @policy: the write policy, none/write-back/write-through.
> +#
> +# @line: the cache Line size in bytes.
> +#
> +# Since: 5.0
> +##
> +{ 'struct': 'NumaHmatCacheOptions',
> +  'data': {
> +   'node-id': 'uint32',
> +   'size': 'size',
> +   'level': 'uint8',
> +   'assoc': 'HmatCacheAssociativity',
> +   'policy': 'HmatCacheWritePolicy',
> +   'line': 'uint16' }}
> +
>  ##
>  # @HostMemPolicy:
>  #
> diff --git a/qemu-options.hx b/qemu-options.hx
> index 929d275450..ad0e5aa190 100644
> --- a/qemu-options.hx
> +++ b/qemu-options.hx
> @@ -169,7 +169,8 @@ DEF("numa", HAS_ARG, QEMU_OPTION_numa,
>      "-numa 
> node[,memdev=id][,cpus=firstcpu[-lastcpu]][,nodeid=node][,initiator=node]\n"
>      "-numa dist,src=source,dst=destination,val=distance\n"
>      "-numa cpu,node-id=node[,socket-id=x][,core-id=y][,thread-id=z]\n"
> -    "-numa 
> hmat-lb,initiator=node,target=node,hierarchy=memory|first-level|second-level|third-level,data-type=access-latency|read-latency|write-latency[,latency=lat][,bandwidth=bw]\n",
> +    "-numa 
> hmat-lb,initiator=node,target=node,hierarchy=memory|first-level|second-level|third-level,data-type=access-latency|read-latency|write-latency[,latency=lat][,bandwidth=bw]\n"
> +    "-numa 
> hmat-cache,node-id=node,size=size,level=level[,assoc=none|direct|complex][,policy=none|write-back|write-through][,line=size]\n",
>      QEMU_ARCH_ALL)
>  STEXI
>  @item -numa 
> node[,mem=@var{size}][,cpus=@var{firstcpu}[-@var{lastcpu}]][,nodeid=@var{node}][,initiator=@var{initiator}]
> @@ -177,6 +178,7 @@ STEXI
>  @itemx -numa dist,src=@var{source},dst=@var{destination},val=@var{distance}
>  @itemx -numa 
> cpu,node-id=@var{node}[,socket-id=@var{x}][,core-id=@var{y}][,thread-id=@var{z}]
>  @itemx -numa 
> hmat-lb,initiator=@var{node},target=@var{node},hierarchy=@var{hierarchy},data-type=@var{tpye}[,latency=@var{lat}][,bandwidth=@var{bw}]
> +@itemx -numa 
> hmat-cache,node-id=@var{node},size=@var{size},level=@var{level}[,assoc=@var{str}][,policy=@var{str}][,line=@var{size}]
>  @findex -numa
>  Define a NUMA node and assign RAM and VCPUs to it.
>  Set the NUMA distance from a source node to a destination node.
> @@ -282,11 +284,19 @@ Note that if NUM is 0, means the corresponding latency 
> or bandwidth information
>  is not provided. And if input numbers without any unit, the latency unit 
> will be
>  'ns' and the bandwidth will be B/s.
>  
> +In @samp{hmat-cache} option, @var{node-id} is the NUMA-id of the memory 
> belongs.
> +@var{size} is the size of memory side cache in bytes. @var{level} is the 
> cache
> +level described in this structure. @var{assoc} is the cache associativity,
> +the possible value is 'none/direct(direct-mapped)/complex(complex cache 
> indexing)'.
> +@var{policy} is the write policy. @var{line} is the cache Line size in bytes.
> +
>  For example, the following options describe 2 NUMA nodes. Node 0 has 2 cpus 
> and
>  a ram, node 1 has only a ram. The processors in node 0 access memory in node
>  0 with access-latency 5 nanoseconds, access-bandwidth is 200 MB/s;
>  The processors in NUMA node 0 access memory in NUMA node 1 with 
> access-latency 10
>  nanoseconds, access-bandwidth is 100 MB/s.
> +And for memory side cache information, NUMA node 0 and 1 both have 1 level 
> memory
> +cache, size is 10KB, policy is write-back, the cache Line size is 8 bytes:
>  @example
>  -machine hmat=on \
>  -m 2G \
> @@ -300,7 +310,9 @@ nanoseconds, access-bandwidth is 100 MB/s.
>  -numa 
> hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-latency,latency=5ns
>  \
>  -numa 
> hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-bandwidth,bandwidth=200M
>  \
>  -numa 
> hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-latency,latency=10ns
>  \
> --numa 
> hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-bandwidth,bandwidth=100M
> +-numa 
> hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-bandwidth,bandwidth=100M
>  \
> +-numa 
> hmat-cache,node-id=0,size=10K,level=1,assoc=direct,policy=write-back,line=8 \
> +-numa 
> hmat-cache,node-id=1,size=10K,level=1,assoc=direct,policy=write-back,line=8
>  @end example
>  
>  ETEXI