qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v35 10/13] target/avr: Add limited support for USART and 16 b


From: Michael Rolnik
Subject: Re: [PATCH v35 10/13] target/avr: Add limited support for USART and 16 bit timer peripherals
Date: Sat, 23 Nov 2019 17:37:16 +0200

Sarah,
could you please answer this question?

Thanks,
Michael

On Fri, Nov 22, 2019 at 6:49 PM Aleksandar Markovic
<address@hidden> wrote:
>
> On Tue, Oct 29, 2019 at 10:25 PM Michael Rolnik <address@hidden> wrote:
> >
> > From: Sarah Harris <address@hidden>
> >
> > These were designed to facilitate testing but should provide enough 
> > function to be useful in other contexts.
> > Only a subset of the functions of each peripheral is implemented, mainly 
> > due to the lack of a standard way to handle electrical connections (like 
> > GPIO pins).
> >
> > Signed-off-by: Sarah Harris <address@hidden>
> > ---
> >  hw/char/Kconfig                |   3 +
> >  hw/char/Makefile.objs          |   1 +
> >  hw/char/avr_usart.c            | 324 ++++++++++++++++++
> >  hw/misc/Kconfig                |   3 +
> >  hw/misc/Makefile.objs          |   2 +
> >  hw/misc/avr_mask.c             | 112 ++++++
> >  hw/timer/Kconfig               |   3 +
> >  hw/timer/Makefile.objs         |   2 +
> >  hw/timer/avr_timer16.c         | 605 +++++++++++++++++++++++++++++++++
> >  include/hw/char/avr_usart.h    |  97 ++++++
> >  include/hw/misc/avr_mask.h     |  47 +++
> >  include/hw/timer/avr_timer16.h |  97 ++++++
> >  12 files changed, 1296 insertions(+)
> >  create mode 100644 hw/char/avr_usart.c
> >  create mode 100644 hw/misc/avr_mask.c
> >  create mode 100644 hw/timer/avr_timer16.c
> >  create mode 100644 include/hw/char/avr_usart.h
> >  create mode 100644 include/hw/misc/avr_mask.h
> >  create mode 100644 include/hw/timer/avr_timer16.h
> >
> > diff --git a/hw/char/Kconfig b/hw/char/Kconfig
> > index 40e7a8b8bb..331b20983f 100644
> > --- a/hw/char/Kconfig
> > +++ b/hw/char/Kconfig
> > @@ -46,3 +46,6 @@ config SCLPCONSOLE
> >
> >  config TERMINAL3270
> >      bool
> > +
> > +config AVR_USART
> > +    bool
> > diff --git a/hw/char/Makefile.objs b/hw/char/Makefile.objs
> > index 02d8a66925..f05c1f5667 100644
> > --- a/hw/char/Makefile.objs
> > +++ b/hw/char/Makefile.objs
> > @@ -21,6 +21,7 @@ obj-$(CONFIG_PSERIES) += spapr_vty.o
> >  obj-$(CONFIG_DIGIC) += digic-uart.o
> >  obj-$(CONFIG_STM32F2XX_USART) += stm32f2xx_usart.o
> >  obj-$(CONFIG_RASPI) += bcm2835_aux.o
> > +common-obj-$(CONFIG_AVR_USART) += avr_usart.o
> >
> >  common-obj-$(CONFIG_CMSDK_APB_UART) += cmsdk-apb-uart.o
> >  common-obj-$(CONFIG_ETRAXFS) += etraxfs_ser.o
> > diff --git a/hw/char/avr_usart.c b/hw/char/avr_usart.c
> > new file mode 100644
> > index 0000000000..9ca3c2a1cd
> > --- /dev/null
> > +++ b/hw/char/avr_usart.c
> > @@ -0,0 +1,324 @@
> > +/*
> > + * AVR USART
> > + *
> > + * Copyright (c) 2018 University of Kent
> > + * Author: Sarah Harris
> > + *
> > + * Permission is hereby granted, free of charge, to any person obtaining a 
> > copy
> > + * of this software and associated documentation files (the "Software"), 
> > to deal
> > + * in the Software without restriction, including without limitation the 
> > rights
> > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or 
> > sell
> > + * copies of the Software, and to permit persons to whom the Software is
> > + * furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be included 
> > in
> > + * all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS 
> > OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR 
> > OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
> > FROM,
> > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS 
> > IN
> > + * THE SOFTWARE.
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "hw/char/avr_usart.h"
> > +#include "qemu/log.h"
> > +#include "hw/irq.h"
> > +#include "hw/qdev-properties.h"
> > +
> > +static int avr_usart_can_receive(void *opaque)
> > +{
> > +    AVRUsartState *usart = opaque;
> > +
> > +    if (usart->data_valid || !(usart->csrb & USART_CSRB_RXEN)) {
> > +        return 0;
> > +    }
> > +    return 1;
> > +}
> > +
> > +static void avr_usart_receive(void *opaque, const uint8_t *buffer, int 
> > size)
> > +{
> > +    AVRUsartState *usart = opaque;
> > +    assert(size == 1);
> > +    assert(!usart->data_valid);
> > +    usart->data = buffer[0];
> > +    usart->data_valid = true;
> > +    usart->csra |= USART_CSRA_RXC;
> > +    if (usart->csrb & USART_CSRB_RXCIE) {
> > +        qemu_set_irq(usart->rxc_irq, 1);
> > +    }
> > +}
> > +
> > +static void update_char_mask(AVRUsartState *usart)
> > +{
> > +    uint8_t mode = ((usart->csrc & USART_CSRC_CSZ0) ? 1 : 0) |
> > +        ((usart->csrc & USART_CSRC_CSZ1) ? 2 : 0) |
> > +        ((usart->csrb & USART_CSRB_CSZ2) ? 4 : 0);
> > +    switch (mode) {
> > +    case 0:
> > +        usart->char_mask = 0b11111;
> > +        break;
> > +    case 1:
> > +        usart->char_mask = 0b111111;
> > +        break;
> > +    case 2:
> > +        usart->char_mask = 0b1111111;
> > +        break;
> > +    case 3:
> > +        usart->char_mask = 0b11111111;
> > +        break;
> > +    case 4:
> > +        /* Fallthrough. */
> > +    case 5:
> > +        /* Fallthrough. */
> > +    case 6:
> > +        qemu_log_mask(
> > +            LOG_GUEST_ERROR,
> > +            "%s: Reserved character size 0x%x\n",
> > +            __func__,
> > +            mode);
> > +        break;
> > +    case 7:
> > +        qemu_log_mask(
> > +            LOG_GUEST_ERROR,
> > +            "%s: Nine bit character size not supported (forcing eight)\n",
> > +            __func__);
> > +        usart->char_mask = 0b11111111;
> > +        break;
> > +    default:
> > +        assert(0);
> > +    }
> > +}
> > +
> > +static void avr_usart_reset(DeviceState *dev)
> > +{
> > +    AVRUsartState *usart = AVR_USART(dev);
> > +    usart->data_valid = false;
> > +    usart->csra = 0b00100000;
> > +    usart->csrb = 0b00000000;
> > +    usart->csrc = 0b00000110;
> > +    usart->brrl = 0;
> > +    usart->brrh = 0;
> > +    update_char_mask(usart);
> > +    qemu_set_irq(usart->rxc_irq, 0);
> > +    qemu_set_irq(usart->txc_irq, 0);
> > +    qemu_set_irq(usart->dre_irq, 0);
> > +}
> > +
> > +static uint64_t avr_usart_read(void *opaque, hwaddr addr, unsigned int 
> > size)
> > +{
> > +    AVRUsartState *usart = opaque;
> > +    uint8_t data;
> > +    assert(size == 1);
> > +
> > +    if (!usart->enabled) {
> > +        return 0;
> > +    }
> > +
> > +    switch (addr) {
> > +    case USART_DR:
> > +        if (!(usart->csrb & USART_CSRB_RXEN)) {
> > +            /* Receiver disabled, ignore. */
> > +            return 0;
> > +        }
> > +        if (usart->data_valid) {
> > +            data = usart->data & usart->char_mask;
> > +            usart->data_valid = false;
> > +        } else {
> > +            data = 0;
> > +        }
> > +        usart->csra &= 0xff ^ USART_CSRA_RXC;
> > +        qemu_set_irq(usart->rxc_irq, 0);
> > +        qemu_chr_fe_accept_input(&usart->chr);
> > +        return data;
>
> Hi, Michael.
>
> Can you please explain to me why in the only "else" block within
> avr_usart_read():
>
>         } else {
>             data = 0;
>         }
>
> we don't use "return 0;" instead of "data = 0;"?
>
> Yours,
> Aleksandar
>
> > +    case USART_CSRA:
> > +        return usart->csra;
> > +    case USART_CSRB:
> > +        return usart->csrb;
> > +    case USART_CSRC:
> > +        return usart->csrc;
> > +    case USART_BRRL:
> > +        return usart->brrl;
> > +    case USART_BRRH:
> > +        return usart->brrh;
> > +    default:
> > +        qemu_log_mask(
> > +            LOG_GUEST_ERROR,
> > +            "%s: Bad offset 0x%"HWADDR_PRIx"\n",
> > +            __func__,
> > +            addr);
> > +    }
> > +    return 0;
> > +}
> > +
> > +static void avr_usart_write(void *opaque, hwaddr addr, uint64_t value,
> > +                                unsigned int size)
> > +{
> > +    AVRUsartState *usart = opaque;
> > +    uint8_t mask;
> > +    uint8_t data;
> > +    assert((value & 0xff) == value);
> > +    assert(size == 1);
> > +
> > +    if (!usart->enabled) {
> > +        return;
> > +    }
> > +
> > +    switch (addr) {
> > +    case USART_DR:
> > +        if (!(usart->csrb & USART_CSRB_TXEN)) {
> > +            /* Transmitter disabled, ignore. */
> > +            return;
> > +        }
> > +        usart->csra |= USART_CSRA_TXC;
> > +        usart->csra |= USART_CSRA_DRE;
> > +        if (usart->csrb & USART_CSRB_TXCIE) {
> > +            qemu_set_irq(usart->txc_irq, 1);
> > +            usart->csra &= 0xff ^ USART_CSRA_TXC;
> > +        }
> > +        if (usart->csrb & USART_CSRB_DREIE) {
> > +            qemu_set_irq(usart->dre_irq, 1);
> > +        }
> > +        data = value;
> > +        qemu_chr_fe_write_all(&usart->chr, &data, 1);
> > +        break;
> > +    case USART_CSRA:
> > +        mask = 0b01000011;
> > +        /* Mask read-only bits. */
> > +        value = (value & mask) | (usart->csra & (0xff ^ mask));
> > +        usart->csra = value;
> > +        if (value & USART_CSRA_TXC) {
> > +            usart->csra ^= USART_CSRA_TXC;
> > +            qemu_set_irq(usart->txc_irq, 0);
> > +        }
> > +        if (value & USART_CSRA_MPCM) {
> > +            qemu_log_mask(
> > +                LOG_GUEST_ERROR,
> > +                "%s: MPCM not supported by USART\n",
> > +                __func__);
> > +        }
> > +        break;
> > +    case USART_CSRB:
> > +        mask = 0b11111101;
> > +        /* Mask read-only bits. */
> > +        value = (value & mask) | (usart->csrb & (0xff ^ mask));
> > +        usart->csrb = value;
> > +        if (!(value & USART_CSRB_RXEN)) {
> > +            /* Receiver disabled, flush input buffer. */
> > +            usart->data_valid = false;
> > +        }
> > +        qemu_set_irq(usart->rxc_irq,
> > +            ((value & USART_CSRB_RXCIE) &&
> > +            (usart->csra & USART_CSRA_RXC)) ? 1 : 0);
> > +        qemu_set_irq(usart->txc_irq,
> > +            ((value & USART_CSRB_TXCIE) &&
> > +            (usart->csra & USART_CSRA_TXC)) ? 1 : 0);
> > +        qemu_set_irq(usart->dre_irq,
> > +            ((value & USART_CSRB_DREIE) &&
> > +            (usart->csra & USART_CSRA_DRE)) ? 1 : 0);
> > +        update_char_mask(usart);
> > +        break;
> > +    case USART_CSRC:
> > +        usart->csrc = value;
> > +        if ((value & USART_CSRC_MSEL1) && (value & USART_CSRC_MSEL0)) {
> > +            qemu_log_mask(
> > +                LOG_GUEST_ERROR,
> > +                "%s: SPI mode not supported by USART\n",
> > +                __func__);
> > +        }
> > +        if ((value & USART_CSRC_MSEL1) && !(value & USART_CSRC_MSEL0)) {
> > +            qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad USART mode\n", 
> > __func__);
> > +        }
> > +        if (!(value & USART_CSRC_PM1) && (value & USART_CSRC_PM0)) {
> > +            qemu_log_mask(
> > +                LOG_GUEST_ERROR,
> > +                "%s: Bad USART parity mode\n",
> > +                __func__);
> > +        }
> > +        update_char_mask(usart);
> > +        break;
> > +    case USART_BRRL:
> > +        usart->brrl = value;
> > +        break;
> > +    case USART_BRRH:
> > +        usart->brrh = value & 0b00001111;
> > +        break;
> > +    default:
> > +        qemu_log_mask(
> > +            LOG_GUEST_ERROR,
> > +            "%s: Bad offset 0x%"HWADDR_PRIx"\n",
> > +            __func__,
> > +            addr);
> > +    }
> > +}
> > +
> > +static const MemoryRegionOps avr_usart_ops = {
> > +    .read = avr_usart_read,
> > +    .write = avr_usart_write,
> > +    .endianness = DEVICE_NATIVE_ENDIAN,
> > +    .impl = {.min_access_size = 1, .max_access_size = 1}
> > +};
> > +
> > +static Property avr_usart_properties[] = {
> > +    DEFINE_PROP_CHR("chardev", AVRUsartState, chr),
> > +    DEFINE_PROP_END_OF_LIST(),
> > +};
> > +
> > +static void avr_usart_pr(void *opaque, int irq, int level)
> > +{
> > +    AVRUsartState *s = AVR_USART(opaque);
> > +
> > +    s->enabled = !level;
> > +
> > +    if (!s->enabled) {
> > +        avr_usart_reset(DEVICE(s));
> > +    }
> > +}
> > +
> > +static void avr_usart_init(Object *obj)
> > +{
> > +    AVRUsartState *s = AVR_USART(obj);
> > +    sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->rxc_irq);
> > +    sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->dre_irq);
> > +    sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->txc_irq);
> > +    memory_region_init_io(&s->mmio, obj, &avr_usart_ops, s, 
> > TYPE_AVR_USART, 8);
> > +    sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
> > +    qdev_init_gpio_in(DEVICE(s), avr_usart_pr, 1);
> > +    s->enabled = true;
> > +}
> > +
> > +static void avr_usart_realize(DeviceState *dev, Error **errp)
> > +{
> > +    AVRUsartState *s = AVR_USART(dev);
> > +    qemu_chr_fe_set_handlers(&s->chr, avr_usart_can_receive,
> > +                             avr_usart_receive, NULL, NULL,
> > +                             s, NULL, true);
> > +    avr_usart_reset(dev);
> > +}
> > +
> > +static void avr_usart_class_init(ObjectClass *klass, void *data)
> > +{
> > +    DeviceClass *dc = DEVICE_CLASS(klass);
> > +
> > +    dc->reset = avr_usart_reset;
> > +    dc->props = avr_usart_properties;
> > +    dc->realize = avr_usart_realize;
> > +}
> > +
> > +static const TypeInfo avr_usart_info = {
> > +    .name          = TYPE_AVR_USART,
> > +    .parent        = TYPE_SYS_BUS_DEVICE,
> > +    .instance_size = sizeof(AVRUsartState),
> > +    .instance_init = avr_usart_init,
> > +    .class_init    = avr_usart_class_init,
> > +};
> > +
> > +static void avr_usart_register_types(void)
> > +{
> > +    type_register_static(&avr_usart_info);
> > +}
> > +
> > +type_init(avr_usart_register_types)
> > diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
> > index 2164646553..e79841e3a4 100644
> > --- a/hw/misc/Kconfig
> > +++ b/hw/misc/Kconfig
> > @@ -125,4 +125,7 @@ config MAC_VIA
> >      select MOS6522
> >      select ADB
> >
> > +config AVR_MASK
> > +    bool
> > +
> >  source macio/Kconfig
> > diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
> > index ba898a5781..3a8093be6a 100644
> > --- a/hw/misc/Makefile.objs
> > +++ b/hw/misc/Makefile.objs
> > @@ -82,3 +82,5 @@ common-obj-$(CONFIG_NRF51_SOC) += nrf51_rng.o
> >  obj-$(CONFIG_MAC_VIA) += mac_via.o
> >
> >  common-obj-$(CONFIG_GRLIB) += grlib_ahb_apb_pnp.o
> > +
> > +obj-$(CONFIG_AVR_MASK) += avr_mask.o
> > diff --git a/hw/misc/avr_mask.c b/hw/misc/avr_mask.c
> > new file mode 100644
> > index 0000000000..3af82ed9c1
> > --- /dev/null
> > +++ b/hw/misc/avr_mask.c
> > @@ -0,0 +1,112 @@
> > +/*
> > + * AVR Power Reduction
> > + *
> > + * Copyright (c) 2019 Michael Rolnik
> > + *
> > + * Permission is hereby granted, free of charge, to any person obtaining a 
> > copy
> > + * of this software and associated documentation files (the "Software"), 
> > to deal
> > + * in the Software without restriction, including without limitation the 
> > rights
> > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or 
> > sell
> > + * copies of the Software, and to permit persons to whom the Software is
> > + * furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be included 
> > in
> > + * all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS 
> > OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR 
> > OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
> > FROM,
> > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS 
> > IN
> > + * THE SOFTWARE.
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "hw/misc/avr_mask.h"
> > +#include "qemu/log.h"
> > +#include "hw/qdev-properties.h"
> > +#include "hw/irq.h"
> > +
> > +#define DB_PRINT(fmt, args...) /* Nothing */
> > +/*#define DB_PRINT(fmt, args...) printf("%s: " fmt "\n", __func__, ## 
> > args)*/
> > +
> > +static void avr_mask_reset(DeviceState *dev)
> > +{
> > +    AVRMaskState *s = AVR_MASK(dev);
> > +
> > +    s->val = 0x00;
> > +
> > +    for (int i = 0; i < 8; i++) {
> > +        qemu_set_irq(s->irq[i], 0);
> > +    }
> > +}
> > +
> > +static uint64_t avr_mask_read(void *opaque, hwaddr offset, unsigned size)
> > +{
> > +    assert(size == 1);
> > +    assert(offset == 0);
> > +    AVRMaskState *s = opaque;
> > +
> > +    return (uint64_t)s->val;
> > +}
> > +
> > +static void avr_mask_write(void *opaque, hwaddr offset,
> > +                              uint64_t val64, unsigned size)
> > +{
> > +    assert(size == 1);
> > +    assert(offset == 0);
> > +    AVRMaskState *s = opaque;
> > +    uint8_t val8 = val64;
> > +
> > +    DB_PRINT("write %d to offset %d", val8, (uint8_t)offset);
> > +
> > +    s->val = val8;
> > +    for (int i = 0; i < 8; i++) {
> > +        qemu_set_irq(s->irq[i], (val8 & (1 << i)) != 0);
> > +    }
> > +}
> > +
> > +static const MemoryRegionOps avr_mask_ops = {
> > +    .read = avr_mask_read,
> > +    .write = avr_mask_write,
> > +    .endianness = DEVICE_NATIVE_ENDIAN,
> > +    .impl = {.max_access_size = 1}
> > +};
> > +
> > +static void avr_mask_init(Object *dev)
> > +{
> > +    AVRMaskState *s = AVR_MASK(dev);
> > +    SysBusDevice *busdev = SYS_BUS_DEVICE(dev);
> > +
> > +    memory_region_init_io(&s->iomem, dev, &avr_mask_ops, s, TYPE_AVR_MASK,
> > +            0x01);
> > +    sysbus_init_mmio(busdev, &s->iomem);
> > +
> > +    for (int i = 0; i < 8; i++) {
> > +        sysbus_init_irq(busdev, &s->irq[i]);
> > +    }
> > +    s->val = 0x00;
> > +}
> > +
> > +static void avr_mask_class_init(ObjectClass *klass, void *data)
> > +{
> > +    DeviceClass *dc = DEVICE_CLASS(klass);
> > +
> > +    dc->reset = avr_mask_reset;
> > +}
> > +
> > +static const TypeInfo avr_mask_info = {
> > +    .name          = TYPE_AVR_MASK,
> > +    .parent        = TYPE_SYS_BUS_DEVICE,
> > +    .instance_size = sizeof(AVRMaskState),
> > +    .class_init    = avr_mask_class_init,
> > +    .instance_init = avr_mask_init,
> > +};
> > +
> > +static void avr_mask_register_types(void)
> > +{
> > +    type_register_static(&avr_mask_info);
> > +}
> > +
> > +type_init(avr_mask_register_types)
> > diff --git a/hw/timer/Kconfig b/hw/timer/Kconfig
> > index a990f9fe35..4343bc23f3 100644
> > --- a/hw/timer/Kconfig
> > +++ b/hw/timer/Kconfig
> > @@ -34,3 +34,6 @@ config CMSDK_APB_TIMER
> >  config CMSDK_APB_DUALTIMER
> >      bool
> >      select PTIMER
> > +
> > +config AVR_TIMER16
> > +    bool
> > diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs
> > index dece235fd7..af0913ca3b 100644
> > --- a/hw/timer/Makefile.objs
> > +++ b/hw/timer/Makefile.objs
> > @@ -35,3 +35,5 @@ common-obj-$(CONFIG_CMSDK_APB_TIMER) += cmsdk-apb-timer.o
> >  common-obj-$(CONFIG_CMSDK_APB_DUALTIMER) += cmsdk-apb-dualtimer.o
> >  common-obj-$(CONFIG_MSF2) += mss-timer.o
> >  common-obj-$(CONFIG_RASPI) += bcm2835_systmr.o
> > +
> > +obj-$(CONFIG_AVR_TIMER16) += avr_timer16.o
> > diff --git a/hw/timer/avr_timer16.c b/hw/timer/avr_timer16.c
> > new file mode 100644
> > index 0000000000..ac6ef73e77
> > --- /dev/null
> > +++ b/hw/timer/avr_timer16.c
> > @@ -0,0 +1,605 @@
> > +/*
> > + * AVR 16 bit timer
> > + *
> > + * Copyright (c) 2018 University of Kent
> > + * Author: Ed Robbins
> > + *
> > + * Permission is hereby granted, free of charge, to any person obtaining a 
> > copy
> > + * of this software and associated documentation files (the "Software"), 
> > to deal
> > + * in the Software without restriction, including without limitation the 
> > rights
> > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or 
> > sell
> > + * copies of the Software, and to permit persons to whom the Software is
> > + * furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be included 
> > in
> > + * all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS 
> > OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR 
> > OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
> > FROM,
> > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS 
> > IN
> > + * THE SOFTWARE.
> > + */
> > +
> > +/*
> > + * Driver for 16 bit timers on 8 bit AVR devices.
> > + * Note:
> > + * ATmega640/V-1280/V-1281/V-2560/V-2561/V timers 1, 3, 4 and 5 are 16 bit
> > + */
> > +
> > +/*
> > + * XXX TODO: Power Reduction Register support
> > + *           prescaler pause support
> > + *           PWM modes, GPIO, output capture pins, input compare pin
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "hw/timer/avr_timer16.h"
> > +#include "qemu/log.h"
> > +#include "hw/irq.h"
> > +#include "hw/qdev-properties.h"
> > +
> > +/* Register offsets */
> > +#define T16_CRA     0x0
> > +#define T16_CRB     0x1
> > +#define T16_CRC     0x2
> > +#define T16_CNTL    0x4
> > +#define T16_CNTH    0x5
> > +#define T16_ICRL    0x6
> > +#define T16_ICRH    0x7
> > +#define T16_OCRAL   0x8
> > +#define T16_OCRAH   0x9
> > +#define T16_OCRBL   0xa
> > +#define T16_OCRBH   0xb
> > +#define T16_OCRCL   0xc
> > +#define T16_OCRCH   0xd
> > +
> > +/* Field masks */
> > +#define T16_CRA_WGM01   0x3
> > +#define T16_CRA_COMC    0xc
> > +#define T16_CRA_COMB    0x30
> > +#define T16_CRA_COMA    0xc0
> > +#define T16_CRA_OC_CONF \
> > +    (T16_CRA_COMA | T16_CRA_COMB | T16_CRA_COMC)
> > +
> > +#define T16_CRB_CS      0x7
> > +#define T16_CRB_WGM23   0x18
> > +#define T16_CRB_ICES    0x40
> > +#define T16_CRB_ICNC    0x80
> > +
> > +#define T16_CRC_FOCC    0x20
> > +#define T16_CRC_FOCB    0x40
> > +#define T16_CRC_FOCA    0x80
> > +
> > +/* Fields masks both TIMSK and TIFR (interrupt mask/flag registers) */
> > +#define T16_INT_TOV    0x1 /* Timer overflow */
> > +#define T16_INT_OCA    0x2 /* Output compare A */
> > +#define T16_INT_OCB    0x4 /* Output compare B */
> > +#define T16_INT_OCC    0x8 /* Output compare C */
> > +#define T16_INT_IC     0x20 /* Input capture */
> > +
> > +/* Clock source values */
> > +#define T16_CLKSRC_STOPPED     0
> > +#define T16_CLKSRC_DIV1        1
> > +#define T16_CLKSRC_DIV8        2
> > +#define T16_CLKSRC_DIV64       3
> > +#define T16_CLKSRC_DIV256      4
> > +#define T16_CLKSRC_DIV1024     5
> > +#define T16_CLKSRC_EXT_FALLING 6
> > +#define T16_CLKSRC_EXT_RISING  7
> > +
> > +/* Timer mode values (not including PWM modes) */
> > +#define T16_MODE_NORMAL     0
> > +#define T16_MODE_CTC_OCRA   4
> > +#define T16_MODE_CTC_ICR    12
> > +
> > +/* Accessors */
> > +#define CLKSRC(t16) (t16->crb & T16_CRB_CS)
> > +#define MODE(t16)   (((t16->crb & T16_CRB_WGM23) >> 1) | \
> > +                     (t16->cra & T16_CRA_WGM01))
> > +#define CNT(t16)    VAL16(t16->cntl, t16->cnth)
> > +#define OCRA(t16)   VAL16(t16->ocral, t16->ocrah)
> > +#define OCRB(t16)   VAL16(t16->ocrbl, t16->ocrbh)
> > +#define OCRC(t16)   VAL16(t16->ocrcl, t16->ocrch)
> > +#define ICR(t16)    VAL16(t16->icrl, t16->icrh)
> > +
> > +/* Helper macros */
> > +#define VAL16(l, h) ((h << 8) | l)
> > +#define ERROR(fmt, args...) \
> > +    qemu_log_mask(LOG_GUEST_ERROR, "%s: " fmt "\n", __func__, ## args)
> > +#define DB_PRINT(fmt, args...) /* Nothing */
> > +/*#define DB_PRINT(fmt, args...) printf("%s: " fmt "\n", __func__, ## 
> > args)*/
> > +
> > +static inline int64_t avr_timer16_ns_to_ticks(AVRTimer16State *t16, 
> > int64_t t)
> > +{
> > +    if (t16->period_ns == 0) {
> > +        return 0;
> > +    }
> > +    return t / t16->period_ns;
> > +}
> > +
> > +static void avr_timer16_update_cnt(AVRTimer16State *t16)
> > +{
> > +    uint16_t cnt;
> > +    cnt = avr_timer16_ns_to_ticks(t16, 
> > qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) -
> > +                                       t16->reset_time_ns);
> > +    t16->cntl = (uint8_t)(cnt & 0xff);
> > +    t16->cnth = (uint8_t)((cnt & 0xff00) >> 8);
> > +}
> > +
> > +static inline void avr_timer16_recalc_reset_time(AVRTimer16State *t16)
> > +{
> > +    t16->reset_time_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) -
> > +                         CNT(t16) * t16->period_ns;
> > +}
> > +
> > +static void avr_timer16_clock_reset(AVRTimer16State *t16)
> > +{
> > +    t16->cntl = 0;
> > +    t16->cnth = 0;
> > +    t16->reset_time_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
> > +}
> > +
> > +static void avr_timer16_clksrc_update(AVRTimer16State *t16)
> > +{
> > +    uint16_t divider = 0;
> > +    switch (CLKSRC(t16)) {
> > +    case T16_CLKSRC_EXT_FALLING:
> > +    case T16_CLKSRC_EXT_RISING:
> > +        ERROR("external clock source unsupported");
> > +        goto end;
> > +    case T16_CLKSRC_STOPPED:
> > +        goto end;
> > +    case T16_CLKSRC_DIV1:
> > +        divider = 1;
> > +        break;
> > +    case T16_CLKSRC_DIV8:
> > +        divider = 8;
> > +        break;
> > +    case T16_CLKSRC_DIV64:
> > +        divider = 64;
> > +        break;
> > +    case T16_CLKSRC_DIV256:
> > +        divider = 256;
> > +        break;
> > +    case T16_CLKSRC_DIV1024:
> > +        divider = 1024;
> > +        break;
> > +    default:
> > +        goto end;
> > +    }
> > +    t16->freq_hz = t16->cpu_freq_hz / divider;
> > +    t16->period_ns = 1000000000ULL / t16->freq_hz;
> > +    DB_PRINT("Timer frequency %" PRIu64 " hz, period %" PRIu64 " ns (%f 
> > s)",
> > +             t16->freq_hz, t16->period_ns, 1 / (double)t16->freq_hz);
> > +end:
> > +    return;
> > +}
> > +
> > +static void avr_timer16_set_alarm(AVRTimer16State *t16)
> > +{
> > +    if (CLKSRC(t16) == T16_CLKSRC_EXT_FALLING ||
> > +        CLKSRC(t16) == T16_CLKSRC_EXT_RISING ||
> > +        CLKSRC(t16) == T16_CLKSRC_STOPPED) {
> > +        /* Timer is disabled or set to external clock source (unsupported) 
> > */
> > +        goto end;
> > +    }
> > +
> > +    uint64_t alarm_offset = 0xffff;
> > +    enum NextInterrupt next_interrupt = OVERFLOW;
> > +
> > +    switch (MODE(t16)) {
> > +    case T16_MODE_NORMAL:
> > +        /* Normal mode */
> > +        if (OCRA(t16) < alarm_offset && OCRA(t16) > CNT(t16) &&
> > +            (t16->imsk & T16_INT_OCA)) {
> > +            alarm_offset = OCRA(t16);
> > +            next_interrupt = COMPA;
> > +        }
> > +        break;
> > +    case T16_MODE_CTC_OCRA:
> > +        /* CTC mode, top = ocra */
> > +        if (OCRA(t16) < alarm_offset && OCRA(t16) > CNT(t16)) {
> > +            alarm_offset = OCRA(t16);
> > +            next_interrupt = COMPA;
> > +        }
> > +       break;
> > +    case T16_MODE_CTC_ICR:
> > +        /* CTC mode, top = icr */
> > +        if (ICR(t16) < alarm_offset && ICR(t16) > CNT(t16)) {
> > +            alarm_offset = ICR(t16);
> > +            next_interrupt = CAPT;
> > +        }
> > +        if (OCRA(t16) < alarm_offset && OCRA(t16) > CNT(t16) &&
> > +            (t16->imsk & T16_INT_OCA)) {
> > +            alarm_offset = OCRA(t16);
> > +            next_interrupt = COMPA;
> > +        }
> > +        break;
> > +    default:
> > +        ERROR("pwm modes are unsupported");
> > +        goto end;
> > +    }
> > +    if (OCRB(t16) < alarm_offset && OCRB(t16) > CNT(t16) &&
> > +        (t16->imsk & T16_INT_OCB)) {
> > +        alarm_offset = OCRB(t16);
> > +        next_interrupt = COMPB;
> > +    }
> > +    if (OCRC(t16) < alarm_offset && OCRB(t16) > CNT(t16) &&
> > +        (t16->imsk & T16_INT_OCC)) {
> > +        alarm_offset = OCRB(t16);
> > +        next_interrupt = COMPC;
> > +    }
> > +    alarm_offset -= CNT(t16);
> > +
> > +    t16->next_interrupt = next_interrupt;
> > +    uint64_t alarm_ns =
> > +        t16->reset_time_ns + ((CNT(t16) + alarm_offset) * t16->period_ns);
> > +    timer_mod(t16->timer, alarm_ns);
> > +
> > +    DB_PRINT("next alarm %" PRIu64 " ns from now",
> > +        alarm_offset * t16->period_ns);
> > +
> > +end:
> > +    return;
> > +}
> > +
> > +static void avr_timer16_interrupt(void *opaque)
> > +{
> > +    AVRTimer16State *t16 = opaque;
> > +    uint8_t mode = MODE(t16);
> > +
> > +    avr_timer16_update_cnt(t16);
> > +
> > +    if (CLKSRC(t16) == T16_CLKSRC_EXT_FALLING ||
> > +        CLKSRC(t16) == T16_CLKSRC_EXT_RISING ||
> > +        CLKSRC(t16) == T16_CLKSRC_STOPPED) {
> > +        /* Timer is disabled or set to external clock source (unsupported) 
> > */
> > +        return;
> > +    }
> > +
> > +    DB_PRINT("interrupt, cnt = %d", CNT(t16));
> > +
> > +    /* Counter overflow */
> > +    if (t16->next_interrupt == OVERFLOW) {
> > +        DB_PRINT("0xffff overflow");
> > +        avr_timer16_clock_reset(t16);
> > +        if (t16->imsk & T16_INT_TOV) {
> > +            t16->ifr |= T16_INT_TOV;
> > +            qemu_set_irq(t16->ovf_irq, 1);
> > +        }
> > +    }
> > +    /* Check for ocra overflow in CTC mode */
> > +    if (mode == T16_MODE_CTC_OCRA && t16->next_interrupt == COMPA) {
> > +        DB_PRINT("CTC OCRA overflow");
> > +        avr_timer16_clock_reset(t16);
> > +    }
> > +    /* Check for icr overflow in CTC mode */
> > +    if (mode == T16_MODE_CTC_ICR && t16->next_interrupt == CAPT) {
> > +        DB_PRINT("CTC ICR overflow");
> > +        avr_timer16_clock_reset(t16);
> > +        if (t16->imsk & T16_INT_IC) {
> > +            t16->ifr |= T16_INT_IC;
> > +            qemu_set_irq(t16->capt_irq, 1);
> > +        }
> > +    }
> > +    /* Check for output compare interrupts */
> > +    if (t16->imsk & T16_INT_OCA && t16->next_interrupt == COMPA) {
> > +        t16->ifr |= T16_INT_OCA;
> > +        qemu_set_irq(t16->compa_irq, 1);
> > +    }
> > +    if (t16->imsk & T16_INT_OCB && t16->next_interrupt == COMPB) {
> > +        t16->ifr |= T16_INT_OCB;
> > +        qemu_set_irq(t16->compb_irq, 1);
> > +    }
> > +    if (t16->imsk & T16_INT_OCC && t16->next_interrupt == COMPC) {
> > +        t16->ifr |= T16_INT_OCC;
> > +        qemu_set_irq(t16->compc_irq, 1);
> > +    }
> > +    avr_timer16_set_alarm(t16);
> > +}
> > +
> > +static void avr_timer16_reset(DeviceState *dev)
> > +{
> > +    AVRTimer16State *t16 = AVR_TIMER16(dev);
> > +
> > +    avr_timer16_clock_reset(t16);
> > +    avr_timer16_clksrc_update(t16);
> > +    avr_timer16_set_alarm(t16);
> > +
> > +    qemu_set_irq(t16->capt_irq, 0);
> > +    qemu_set_irq(t16->compa_irq, 0);
> > +    qemu_set_irq(t16->compb_irq, 0);
> > +    qemu_set_irq(t16->compc_irq, 0);
> > +    qemu_set_irq(t16->ovf_irq, 0);
> > +}
> > +
> > +static uint64_t avr_timer16_read(void *opaque, hwaddr offset, unsigned 
> > size)
> > +{
> > +    assert(size == 1);
> > +    AVRTimer16State *t16 = opaque;
> > +    uint8_t retval = 0;
> > +
> > +    switch (offset) {
> > +    case T16_CRA:
> > +        retval = t16->cra;
> > +        break;
> > +    case T16_CRB:
> > +        retval = t16->crb;
> > +        break;
> > +    case T16_CRC:
> > +        retval = t16->crc;
> > +        break;
> > +    case T16_CNTL:
> > +        avr_timer16_update_cnt(t16);
> > +        t16->rtmp = t16->cnth;
> > +        retval = t16->cntl;
> > +        break;
> > +    case T16_CNTH:
> > +        retval = t16->rtmp;
> > +        break;
> > +    case T16_ICRL:
> > +        /*
> > +         * The timer copies cnt to icr when the input capture pin changes
> > +         * state or when the analog comparator has a match. We don't
> > +         * emulate this behaviour. We do support it's use for defining a
> > +         * TOP value in T16_MODE_CTC_ICR
> > +         */
> > +        t16->rtmp = t16->icrh;
> > +        retval = t16->icrl;
> > +        break;
> > +    case T16_ICRH:
> > +        retval = t16->rtmp;
> > +        break;
> > +    case T16_OCRAL:
> > +        retval = t16->ocral;
> > +        break;
> > +    case T16_OCRAH:
> > +        retval = t16->ocrah;
> > +        break;
> > +    case T16_OCRBL:
> > +        retval = t16->ocrbl;
> > +        break;
> > +    case T16_OCRBH:
> > +        retval = t16->ocrbh;
> > +        break;
> > +    case T16_OCRCL:
> > +        retval = t16->ocrcl;
> > +        break;
> > +    case T16_OCRCH:
> > +        retval = t16->ocrch;
> > +        break;
> > +    default:
> > +        break;
> > +    }
> > +    return (uint64_t)retval;
> > +}
> > +
> > +static void avr_timer16_write(void *opaque, hwaddr offset,
> > +                              uint64_t val64, unsigned size)
> > +{
> > +    assert(size == 1);
> > +    AVRTimer16State *t16 = opaque;
> > +    uint8_t val8 = (uint8_t)val64;
> > +    uint8_t prev_clk_src = CLKSRC(t16);
> > +
> > +    DB_PRINT("write %d to offset %d", val8, (uint8_t)offset);
> > +
> > +    switch (offset) {
> > +    case T16_CRA:
> > +        t16->cra = val8;
> > +        if (t16->cra & T16_CRA_OC_CONF) {
> > +            ERROR("output compare pins unsupported");
> > +        }
> > +        break;
> > +    case T16_CRB:
> > +        t16->crb = val8;
> > +        if (t16->crb & T16_CRB_ICNC) {
> > +            ERROR("input capture noise canceller unsupported");
> > +        }
> > +        if (t16->crb & T16_CRB_ICES) {
> > +            ERROR("input capture unsupported");
> > +        }
> > +        if (CLKSRC(t16) != prev_clk_src) {
> > +            avr_timer16_clksrc_update(t16);
> > +            if (prev_clk_src == T16_CLKSRC_STOPPED) {
> > +                t16->reset_time_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
> > +            }
> > +        }
> > +        break;
> > +    case T16_CRC:
> > +        t16->crc = val8;
> > +        ERROR("output compare pins unsupported");
> > +        break;
> > +    case T16_CNTL:
> > +        /*
> > +         * CNT is the 16-bit counter value, it must be read/written via
> > +         * a temporary register (rtmp) to make the read/write atomic.
> > +         */
> > +        /* ICR also has this behaviour, and shares rtmp */
> > +        /*
> > +         * Writing CNT blocks compare matches for one clock cycle.
> > +         * Writing CNT to TOP or to an OCR value (if in use) will
> > +         * skip the relevant interrupt
> > +         */
> > +        t16->cntl = val8;
> > +        t16->cnth = t16->rtmp;
> > +        avr_timer16_recalc_reset_time(t16);
> > +        break;
> > +    case T16_CNTH:
> > +        t16->rtmp = val8;
> > +        break;
> > +    case T16_ICRL:
> > +        /* ICR can only be written in mode T16_MODE_CTC_ICR */
> > +        if (MODE(t16) == T16_MODE_CTC_ICR) {
> > +            t16->icrl = val8;
> > +            t16->icrh = t16->rtmp;
> > +        }
> > +        break;
> > +    case T16_ICRH:
> > +        if (MODE(t16) == T16_MODE_CTC_ICR) {
> > +            t16->rtmp = val8;
> > +        }
> > +        break;
> > +    case T16_OCRAL:
> > +        /*
> > +         * OCRn cause the relevant output compare flag to be raised, and
> > +         * trigger an interrupt, when CNT is equal to the value here
> > +         */
> > +        t16->ocral = val8;
> > +        break;
> > +    case T16_OCRAH:
> > +        t16->ocrah = val8;
> > +        break;
> > +    case T16_OCRBL:
> > +        t16->ocrbl = val8;
> > +        break;
> > +    case T16_OCRBH:
> > +        t16->ocrbh = val8;
> > +        break;
> > +    case T16_OCRCL:
> > +        t16->ocrcl = val8;
> > +        break;
> > +    case T16_OCRCH:
> > +        t16->ocrch = val8;
> > +        break;
> > +    default:
> > +        break;
> > +    }
> > +    avr_timer16_set_alarm(t16);
> > +}
> > +
> > +static uint64_t avr_timer16_imsk_read(void *opaque,
> > +                                      hwaddr offset,
> > +                                      unsigned size)
> > +{
> > +    assert(size == 1);
> > +    AVRTimer16State *t16 = opaque;
> > +    if (offset != 0) {
> > +        return 0;
> > +    }
> > +    return t16->imsk;
> > +}
> > +
> > +static void avr_timer16_imsk_write(void *opaque, hwaddr offset,
> > +                                   uint64_t val64, unsigned size)
> > +{
> > +    assert(size == 1);
> > +    AVRTimer16State *t16 = opaque;
> > +    if (offset != 0) {
> > +        return;
> > +    }
> > +    t16->imsk = (uint8_t)val64;
> > +}
> > +
> > +static uint64_t avr_timer16_ifr_read(void *opaque,
> > +                                     hwaddr offset,
> > +                                     unsigned size)
> > +{
> > +    assert(size == 1);
> > +    AVRTimer16State *t16 = opaque;
> > +    if (offset != 0) {
> > +        return 0;
> > +    }
> > +    return t16->ifr;
> > +}
> > +
> > +static void avr_timer16_ifr_write(void *opaque, hwaddr offset,
> > +                                  uint64_t val64, unsigned size)
> > +{
> > +    assert(size == 1);
> > +    AVRTimer16State *t16 = opaque;
> > +    if (offset != 0) {
> > +        return;
> > +    }
> > +    t16->ifr = (uint8_t)val64;
> > +}
> > +
> > +static const MemoryRegionOps avr_timer16_ops = {
> > +    .read = avr_timer16_read,
> > +    .write = avr_timer16_write,
> > +    .endianness = DEVICE_NATIVE_ENDIAN,
> > +    .impl = {.max_access_size = 1}
> > +};
> > +
> > +static const MemoryRegionOps avr_timer16_imsk_ops = {
> > +    .read = avr_timer16_imsk_read,
> > +    .write = avr_timer16_imsk_write,
> > +    .endianness = DEVICE_NATIVE_ENDIAN,
> > +    .impl = {.max_access_size = 1}
> > +};
> > +
> > +static const MemoryRegionOps avr_timer16_ifr_ops = {
> > +    .read = avr_timer16_ifr_read,
> > +    .write = avr_timer16_ifr_write,
> > +    .endianness = DEVICE_NATIVE_ENDIAN,
> > +    .impl = {.max_access_size = 1}
> > +};
> > +
> > +static Property avr_timer16_properties[] = {
> > +    DEFINE_PROP_UINT64("cpu-frequency-hz", struct AVRTimer16State,
> > +                       cpu_freq_hz, 20000000),
> > +    DEFINE_PROP_END_OF_LIST(),
> > +};
> > +
> > +static void avr_timer16_pr(void *opaque, int irq, int level)
> > +{
> > +    AVRTimer16State *s = AVR_TIMER16(opaque);
> > +
> > +    s->enabled = !level;
> > +
> > +    if (!s->enabled) {
> > +        avr_timer16_reset(DEVICE(s));
> > +    }
> > +}
> > +
> > +static void avr_timer16_init(Object *obj)
> > +{
> > +    AVRTimer16State *s = AVR_TIMER16(obj);
> > +
> > +    sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->capt_irq);
> > +    sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->compa_irq);
> > +    sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->compb_irq);
> > +    sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->compc_irq);
> > +    sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->ovf_irq);
> > +
> > +    memory_region_init_io(&s->iomem, obj, &avr_timer16_ops,
> > +                          s, TYPE_AVR_TIMER16, 0xe);
> > +    memory_region_init_io(&s->imsk_iomem, obj, &avr_timer16_imsk_ops,
> > +                          s, TYPE_AVR_TIMER16, 0x1);
> > +    memory_region_init_io(&s->ifr_iomem, obj, &avr_timer16_ifr_ops,
> > +                          s, TYPE_AVR_TIMER16, 0x1);
> > +
> > +    sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem);
> > +    sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->imsk_iomem);
> > +    sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->ifr_iomem);
> > +    qdev_init_gpio_in(DEVICE(s), avr_timer16_pr, 1);
> > +
> > +    s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, avr_timer16_interrupt, s);
> > +    s->enabled = true;
> > +}
> > +
> > +static void avr_timer16_class_init(ObjectClass *klass, void *data)
> > +{
> > +    DeviceClass *dc = DEVICE_CLASS(klass);
> > +
> > +    dc->reset = avr_timer16_reset;
> > +    dc->props = avr_timer16_properties;
> > +}
> > +
> > +static const TypeInfo avr_timer16_info = {
> > +    .name          = TYPE_AVR_TIMER16,
> > +    .parent        = TYPE_SYS_BUS_DEVICE,
> > +    .instance_size = sizeof(AVRTimer16State),
> > +    .instance_init = avr_timer16_init,
> > +    .class_init    = avr_timer16_class_init,
> > +};
> > +
> > +static void avr_timer16_register_types(void)
> > +{
> > +    type_register_static(&avr_timer16_info);
> > +}
> > +
> > +type_init(avr_timer16_register_types)
> > diff --git a/include/hw/char/avr_usart.h b/include/hw/char/avr_usart.h
> > new file mode 100644
> > index 0000000000..8e9ee88bbd
> > --- /dev/null
> > +++ b/include/hw/char/avr_usart.h
> > @@ -0,0 +1,97 @@
> > +/*
> > + * AVR USART
> > + *
> > + * Copyright (c) 2018 University of Kent
> > + * Author: Sarah Harris
> > + *
> > + * Permission is hereby granted, free of charge, to any person obtaining a 
> > copy
> > + * of this software and associated documentation files (the "Software"), 
> > to deal
> > + * in the Software without restriction, including without limitation the 
> > rights
> > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or 
> > sell
> > + * copies of the Software, and to permit persons to whom the Software is
> > + * furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be included 
> > in
> > + * all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS 
> > OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR 
> > OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
> > FROM,
> > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS 
> > IN
> > + * THE SOFTWARE.
> > + */
> > +
> > +#ifndef HW_AVR_USART_H
> > +#define HW_AVR_USART_H
> > +
> > +#include "hw/sysbus.h"
> > +#include "chardev/char-fe.h"
> > +#include "hw/hw.h"
> > +
> > +/* Offsets of registers. */
> > +#define USART_DR   0x06
> > +#define USART_CSRA  0x00
> > +#define USART_CSRB  0x01
> > +#define USART_CSRC  0x02
> > +#define USART_BRRH 0x05
> > +#define USART_BRRL 0x04
> > +
> > +/* Relevant bits in regiters. */
> > +#define USART_CSRA_RXC    (1 << 7)
> > +#define USART_CSRA_TXC    (1 << 6)
> > +#define USART_CSRA_DRE    (1 << 5)
> > +#define USART_CSRA_MPCM   (1 << 0)
> > +
> > +#define USART_CSRB_RXCIE  (1 << 7)
> > +#define USART_CSRB_TXCIE  (1 << 6)
> > +#define USART_CSRB_DREIE  (1 << 5)
> > +#define USART_CSRB_RXEN   (1 << 4)
> > +#define USART_CSRB_TXEN   (1 << 3)
> > +#define USART_CSRB_CSZ2   (1 << 2)
> > +#define USART_CSRB_RXB8   (1 << 1)
> > +#define USART_CSRB_TXB8   (1 << 0)
> > +
> > +#define USART_CSRC_MSEL1  (1 << 7)
> > +#define USART_CSRC_MSEL0  (1 << 6)
> > +#define USART_CSRC_PM1    (1 << 5)
> > +#define USART_CSRC_PM0    (1 << 4)
> > +#define USART_CSRC_CSZ1   (1 << 2)
> > +#define USART_CSRC_CSZ0   (1 << 1)
> > +
> > +#define TYPE_AVR_USART "avr-usart"
> > +#define AVR_USART(obj) \
> > +    OBJECT_CHECK(AVRUsartState, (obj), TYPE_AVR_USART)
> > +
> > +typedef struct {
> > +    /* <private> */
> > +    SysBusDevice parent_obj;
> > +
> > +    /* <public> */
> > +    MemoryRegion mmio;
> > +
> > +    CharBackend chr;
> > +
> > +    bool enabled;
> > +
> > +    uint8_t data;
> > +    bool data_valid;
> > +    uint8_t char_mask;
> > +    /* Control and Status Registers */
> > +    uint8_t csra;
> > +    uint8_t csrb;
> > +    uint8_t csrc;
> > +    /* Baud Rate Registers (low/high byte) */
> > +    uint8_t brrh;
> > +    uint8_t brrl;
> > +
> > +    /* Receive Complete */
> > +    qemu_irq rxc_irq;
> > +    /* Transmit Complete */
> > +    qemu_irq txc_irq;
> > +    /* Data Register Empty */
> > +    qemu_irq dre_irq;
> > +} AVRUsartState;
> > +
> > +#endif /* HW_AVR_USART_H */
> > diff --git a/include/hw/misc/avr_mask.h b/include/hw/misc/avr_mask.h
> > new file mode 100644
> > index 0000000000..d3e21972d8
> > --- /dev/null
> > +++ b/include/hw/misc/avr_mask.h
> > @@ -0,0 +1,47 @@
> > +/*
> > + * AVR Power Reduction
> > + *
> > + * Copyright (c) 2019 Michael Rolnik
> > + *
> > + * Permission is hereby granted, free of charge, to any person obtaining a 
> > copy
> > + * of this software and associated documentation files (the "Software"), 
> > to deal
> > + * in the Software without restriction, including without limitation the 
> > rights
> > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or 
> > sell
> > + * copies of the Software, and to permit persons to whom the Software is
> > + * furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be included 
> > in
> > + * all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS 
> > OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR 
> > OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
> > FROM,
> > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS 
> > IN
> > + * THE SOFTWARE.
> > + */
> > +
> > +#ifndef HW_avr_mask_H
> > +#define HW_avr_mask_H
> > +
> > +#include "hw/sysbus.h"
> > +#include "chardev/char-fe.h"
> > +#include "hw/hw.h"
> > +
> > +
> > +#define TYPE_AVR_MASK "avr-mask"
> > +#define AVR_MASK(obj) OBJECT_CHECK(AVRMaskState, (obj), TYPE_AVR_MASK)
> > +
> > +typedef struct {
> > +    /* <private> */
> > +    SysBusDevice parent_obj;
> > +
> > +    /* <public> */
> > +    MemoryRegion iomem;
> > +
> > +    uint8_t val;
> > +    qemu_irq irq[8];
> > +} AVRMaskState;
> > +
> > +#endif /* HW_avr_mask_H */
> > diff --git a/include/hw/timer/avr_timer16.h b/include/hw/timer/avr_timer16.h
> > new file mode 100644
> > index 0000000000..5639074ce5
> > --- /dev/null
> > +++ b/include/hw/timer/avr_timer16.h
> > @@ -0,0 +1,97 @@
> > +/*
> > + * AVR 16 bit timer
> > + *
> > + * Copyright (c) 2018 University of Kent
> > + * Author: Ed Robbins
> > + *
> > + * Permission is hereby granted, free of charge, to any person obtaining a 
> > copy
> > + * of this software and associated documentation files (the "Software"), 
> > to deal
> > + * in the Software without restriction, including without limitation the 
> > rights
> > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or 
> > sell
> > + * copies of the Software, and to permit persons to whom the Software is
> > + * furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be included 
> > in
> > + * all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS 
> > OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR 
> > OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
> > FROM,
> > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS 
> > IN
> > + * THE SOFTWARE.
> > + */
> > +
> > +/*
> > + * Driver for 16 bit timers on 8 bit AVR devices.
> > + * Note:
> > + * On ATmega640/V-1280/V-1281/V-2560/V-2561/V timers 1, 3, 4 and 5 are 16 
> > bit
> > + */
> > +
> > +#ifndef AVR_TIMER16_H
> > +#define AVR_TIMER16_H
> > +
> > +#include "hw/sysbus.h"
> > +#include "qemu/timer.h"
> > +#include "hw/hw.h"
> > +
> > +enum NextInterrupt {
> > +    OVERFLOW,
> > +    COMPA,
> > +    COMPB,
> > +    COMPC,
> > +    CAPT
> > +};
> > +
> > +#define TYPE_AVR_TIMER16 "avr-timer16"
> > +#define AVR_TIMER16(obj) \
> > +    OBJECT_CHECK(AVRTimer16State, (obj), TYPE_AVR_TIMER16)
> > +
> > +typedef struct AVRTimer16State {
> > +    /* <private> */
> > +    SysBusDevice parent_obj;
> > +
> > +    /* <public> */
> > +    MemoryRegion iomem;
> > +    MemoryRegion imsk_iomem;
> > +    MemoryRegion ifr_iomem;
> > +    QEMUTimer *timer;
> > +    qemu_irq capt_irq;
> > +    qemu_irq compa_irq;
> > +    qemu_irq compb_irq;
> > +    qemu_irq compc_irq;
> > +    qemu_irq ovf_irq;
> > +
> > +    bool enabled;
> > +
> > +    /* registers */
> > +    uint8_t cra;
> > +    uint8_t crb;
> > +    uint8_t crc;
> > +    uint8_t cntl;
> > +    uint8_t cnth;
> > +    uint8_t icrl;
> > +    uint8_t icrh;
> > +    uint8_t ocral;
> > +    uint8_t ocrah;
> > +    uint8_t ocrbl;
> > +    uint8_t ocrbh;
> > +    uint8_t ocrcl;
> > +    uint8_t ocrch;
> > +    /*
> > +     * Reads and writes to CNT and ICR utilise a bizarre temporary
> > +     * register, which we emulate
> > +     */
> > +    uint8_t rtmp;
> > +    uint8_t imsk;
> > +    uint8_t ifr;
> > +
> > +    uint64_t cpu_freq_hz;
> > +    uint64_t freq_hz;
> > +    uint64_t period_ns;
> > +    uint64_t reset_time_ns;
> > +    enum NextInterrupt next_interrupt;
> > +} AVRTimer16State;
> > +
> > +#endif /* AVR_TIMER16_H */
> > --
> > 2.17.2 (Apple Git-113)
> >



-- 
Best Regards,
Michael Rolnik



reply via email to

[Prev in Thread] Current Thread [Next in Thread]