This series of patches adds 8bit AVR cores to QEMU.
All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested
yet.
However I was able to execute simple code with functions. e.g fibonacci
calculation.
This series of patches include a non real, sample board.
No fuses support yet. PC is set to 0 at reset.
the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR cores
avr1
avr2 avr25
avr3 avr31 avr35
avr4
avr5 avr51
avr6
xmega2 xmega4 xmega5 xmega6 xmega7
3. a definition of sample machine with SRAM, FLASH and CPU which allows to
execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together
changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of 0x000000ff) for
faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM
11.fixing MULS/MULSU not to modify inputs' content
12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH
changes since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)
changes since v5
1. BLD bug fix
2. decoder generator is added
chages since v6
1. using cpu_get_sreg/cpu_set_sreg in
avr_cpu_gdb_read_register/avr_cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_ret
changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported yet
registers only
3. MAINTAINERS updated
changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing on
a. Mac, Apple LLVM version 7.0.0
b. Ubuntu 12.04, gcc 4.9.2
c. Fedora 23, gcc 5.3.1
4. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory
changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to access
registers
changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs
changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code
changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register functions
12.any cpu is removed
12.feature bits are not saved into vm state
changes since v13
1. rebasing to v2.7.0-rc1
changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chris
changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb)
3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32
changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in them
changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:
1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.
I retained the two separate files that could be regenerated
from the included cpugen program, but merged in translate-insn.c.
Not that it matters, but the code generated is about 3k smaller.
changes since v18
1. moving target-avr into target/avr
2. do not call cpu_exec_initfn function from avr_cpu_initfn
3. call cpu_exec_realizefn avr_cpu_realizefn
4. do not fail sample machine creation if no rom is suplied
5. add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code
6. fix a register getters/setters in machine.c
7. changing QEMU_ARCH_AVR from 1<<17 to 1<<18
changes since v19
1. use decodetree.py tool to decode instructions
2. adding USART
3. adding 16 bit timer peripherals
4. changing QEMU_ARCH_AVR from 1<<18 to 1<<20
5. renaming tlb_fill to avr_cpu_tlb_fill
changes since v20
1. use one CPU naming convention
2. merging insn16.decode & insn32.decode files
3. modifying skip next instruction mechanizm
4. translate BREAK as NOP for now
changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and fixes a
couple of bugs wrt single stepping
by address@hidden
2. Drop cpc and fix page cross condition.
by address@hidden
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml
changes since v22
1. Rebase
2. Split long comment
changes since v23
1. remove avr_cpu_list_compare function
2. modify avr_cpu_class_by_name function
3. modify avr_cpu_list_entry function
4. modify avr_cpu_list function
changes since v24
1. remove AVR_CPU_TYPE_NAME macro
changes since v25
1. fix patches. every file belong to one patch only
2. change copyright year from 2016 to 2019
3. create mask device to emulate prr0/prr1
changes since v26
1. add avocado acceptence test
2. add boot serial test
changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size
changes since v28
1. rebase
2. fix includes & build
changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'
changes since v30
1. rebase
changes since v31
1. splitting 'Add instruction translation' commit
2. fixing typo in qapi/machine.json sicne -> since
3. removing unintended changes in configure file
4. adding Richard Henderson as a co developer to 'Add instruction translation
- CPU main translation funcions' commit
changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z
changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic
changes since v34
1. rebase
changes since v35
1. rebase
2. use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c
3. split "target/avr: Register AVR support with the rest of QEMU" into three
patches
1. "target/avr: Register AVR support with the rest of QEMU"
2. "target/avr: Update build system"
3. "target/avr: Update MAINTAINERS file"
4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"