[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH] hw/unicore32/puv3: Use qemu_log_mask(ERROR) instead of debug
From: |
Philippe Mathieu-Daudé |
Subject: |
Re: [PATCH] hw/unicore32/puv3: Use qemu_log_mask(ERROR) instead of debug printf() |
Date: |
Wed, 3 Jun 2020 08:03:41 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.5.0 |
Ping for review.
Also, as unicore32 is not very active, can this go via qemu-trivial?
On 5/24/20 6:45 PM, Philippe Mathieu-Daudé wrote:
> Replace some debug printf() calls by qemu_log_mask(LOG_GUEST_ERROR).
>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> hw/dma/puv3_dma.c | 9 +++++++--
> hw/gpio/puv3_gpio.c | 15 +++++++++++----
> hw/intc/puv3_intc.c | 9 +++++++--
> hw/misc/puv3_pm.c | 9 +++++++--
> hw/timer/puv3_ost.c | 9 +++++++--
> hw/unicore32/puv3.c | 2 --
> 6 files changed, 39 insertions(+), 14 deletions(-)
>
> diff --git a/hw/dma/puv3_dma.c b/hw/dma/puv3_dma.c
> index 5488d388a9..7fa979180f 100644
> --- a/hw/dma/puv3_dma.c
> +++ b/hw/dma/puv3_dma.c
> @@ -15,6 +15,7 @@
> #undef DEBUG_PUV3
> #include "hw/unicore32/puv3.h"
> #include "qemu/module.h"
> +#include "qemu/log.h"
>
> #define PUV3_DMA_CH_NR (6)
> #define PUV3_DMA_CH_MASK (0xff)
> @@ -43,7 +44,9 @@ static uint64_t puv3_dma_read(void *opaque, hwaddr offset,
> ret = s->reg_CFG[PUV3_DMA_CH(offset)];
> break;
> default:
> - DPRINTF("Bad offset 0x%x\n", offset);
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: Bad read offset 0x%"HWADDR_PRIx"\n",
> + __func__, offset);
> }
> DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
>
> @@ -62,7 +65,9 @@ static void puv3_dma_write(void *opaque, hwaddr offset,
> s->reg_CFG[PUV3_DMA_CH(offset)] = value;
> break;
> default:
> - DPRINTF("Bad offset 0x%x\n", offset);
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: Bad write offset 0x%"HWADDR_PRIx"\n",
> + __func__, offset);
> }
> DPRINTF("offset 0x%x, value 0x%x\n", offset, value);
> }
> diff --git a/hw/gpio/puv3_gpio.c b/hw/gpio/puv3_gpio.c
> index d19e342514..7362b6715f 100644
> --- a/hw/gpio/puv3_gpio.c
> +++ b/hw/gpio/puv3_gpio.c
> @@ -15,6 +15,7 @@
> #undef DEBUG_PUV3
> #include "hw/unicore32/puv3.h"
> #include "qemu/module.h"
> +#include "qemu/log.h"
>
> #define TYPE_PUV3_GPIO "puv3_gpio"
> #define PUV3_GPIO(obj) OBJECT_CHECK(PUV3GPIOState, (obj), TYPE_PUV3_GPIO)
> @@ -47,7 +48,9 @@ static uint64_t puv3_gpio_read(void *opaque, hwaddr offset,
> ret = s->reg_GPIR;
> break;
> default:
> - DPRINTF("Bad offset 0x%x\n", offset);
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: Bad read offset 0x%"HWADDR_PRIx"\n",
> + __func__, offset);
> }
> DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
>
> @@ -68,14 +71,16 @@ static void puv3_gpio_write(void *opaque, hwaddr offset,
> if (s->reg_GPDR & value) {
> s->reg_GPLR |= value;
> } else {
> - DPRINTF("Write gpio input port error!");
> + qemu_log_mask(LOG_GUEST_ERROR, "%s: Write gpio input port\n",
> + __func__);
> }
> break;
> case 0x0c:
> if (s->reg_GPDR & value) {
> s->reg_GPLR &= ~value;
> } else {
> - DPRINTF("Write gpio input port error!");
> + qemu_log_mask(LOG_GUEST_ERROR, "%s: Write gpio input port\n",
> + __func__);
> }
> break;
> case 0x10: /* GRER */
> @@ -86,7 +91,9 @@ static void puv3_gpio_write(void *opaque, hwaddr offset,
> s->reg_GPIR = value;
> break;
> default:
> - DPRINTF("Bad offset 0x%x\n", offset);
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: Bad write offset 0x%"HWADDR_PRIx"\n",
> + __func__, offset);
> }
> }
>
> diff --git a/hw/intc/puv3_intc.c b/hw/intc/puv3_intc.c
> index e018955ce8..090d4839d1 100644
> --- a/hw/intc/puv3_intc.c
> +++ b/hw/intc/puv3_intc.c
> @@ -16,6 +16,7 @@
> #undef DEBUG_PUV3
> #include "hw/unicore32/puv3.h"
> #include "qemu/module.h"
> +#include "qemu/log.h"
>
> #define TYPE_PUV3_INTC "puv3_intc"
> #define PUV3_INTC(obj) OBJECT_CHECK(PUV3INTCState, (obj), TYPE_PUV3_INTC)
> @@ -68,7 +69,9 @@ static uint64_t puv3_intc_read(void *opaque, hwaddr offset,
> ret = s->reg_ICPR; /* the same value with ICPR */
> break;
> default:
> - DPRINTF("Bad offset %x\n", (int)offset);
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: Bad read offset 0x%"HWADDR_PRIx"\n",
> + __func__, offset);
> }
> DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
> return ret;
> @@ -88,7 +91,9 @@ static void puv3_intc_write(void *opaque, hwaddr offset,
> s->reg_ICMR = value;
> break;
> default:
> - DPRINTF("Bad offset 0x%x\n", (int)offset);
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: Bad write offset 0x%"HWADDR_PRIx"\n",
> + __func__, offset);
> return;
> }
> puv3_intc_update(s);
> diff --git a/hw/misc/puv3_pm.c b/hw/misc/puv3_pm.c
> index c213500d9c..8989d363cd 100644
> --- a/hw/misc/puv3_pm.c
> +++ b/hw/misc/puv3_pm.c
> @@ -15,6 +15,7 @@
> #undef DEBUG_PUV3
> #include "hw/unicore32/puv3.h"
> #include "qemu/module.h"
> +#include "qemu/log.h"
>
> #define TYPE_PUV3_PM "puv3_pm"
> #define PUV3_PM(obj) OBJECT_CHECK(PUV3PMState, (obj), TYPE_PUV3_PM)
> @@ -73,7 +74,9 @@ static uint64_t puv3_pm_read(void *opaque, hwaddr offset,
> ret = 0x7;
> break;
> default:
> - DPRINTF("Bad offset 0x%x\n", offset);
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: Bad read offset 0x%"HWADDR_PRIx"\n",
> + __func__, offset);
> }
> DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
>
> @@ -105,7 +108,9 @@ static void puv3_pm_write(void *opaque, hwaddr offset,
> case 0x38:
> break;
> default:
> - DPRINTF("Bad offset 0x%x\n", offset);
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: Bad write offset 0x%"HWADDR_PRIx"\n",
> + __func__, offset);
> }
> DPRINTF("offset 0x%x, value 0x%x\n", offset, value);
> }
> diff --git a/hw/timer/puv3_ost.c b/hw/timer/puv3_ost.c
> index 697519593b..f76b0bb1ca 100644
> --- a/hw/timer/puv3_ost.c
> +++ b/hw/timer/puv3_ost.c
> @@ -14,6 +14,7 @@
> #include "hw/irq.h"
> #include "hw/ptimer.h"
> #include "qemu/module.h"
> +#include "qemu/log.h"
>
> #undef DEBUG_PUV3
> #include "hw/unicore32/puv3.h"
> @@ -52,7 +53,9 @@ static uint64_t puv3_ost_read(void *opaque, hwaddr offset,
> ret = s->reg_OIER;
> break;
> default:
> - DPRINTF("Bad offset %x\n", (int)offset);
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: Bad read offset 0x%"HWADDR_PRIx"\n",
> + __func__, offset);
> }
> DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
> return ret;
> @@ -88,7 +91,9 @@ static void puv3_ost_write(void *opaque, hwaddr offset,
> s->reg_OIER = value;
> break;
> default:
> - DPRINTF("Bad offset %x\n", (int)offset);
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: Bad write offset 0x%"HWADDR_PRIx"\n",
> + __func__, offset);
> }
> }
>
> diff --git a/hw/unicore32/puv3.c b/hw/unicore32/puv3.c
> index 7f9c0238fe..eacacb4249 100644
> --- a/hw/unicore32/puv3.c
> +++ b/hw/unicore32/puv3.c
> @@ -16,8 +16,6 @@
> #include "hw/boards.h"
> #include "hw/loader.h"
> #include "sysemu/qtest.h"
> -
> -#undef DEBUG_PUV3
> #include "hw/unicore32/puv3.h"
> #include "hw/input/i8042.h"
> #include "hw/irq.h"
>
- Re: [PATCH] hw/unicore32/puv3: Use qemu_log_mask(ERROR) instead of debug printf(),
Philippe Mathieu-Daudé <=