[PATCH v8 06/10] acpi: factor out fw_cfg_add_acpi_dsdt()

[Gerd Hoffmann]

Add helper function to add fw_cfg device,
also move code to hw/i386/fw_cfg.c.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
---
 hw/i386/fw_cfg.h     |  1 +
 hw/i386/acpi-build.c | 24 +-----------------------
 hw/i386/fw_cfg.c     | 28 ++++++++++++++++++++++++++++
 3 files changed, 30 insertions(+), 23 deletions(-)

diff --git a/hw/i386/fw_cfg.h b/hw/i386/fw_cfg.h
index 9e742787792b..275f15c1c5e8 100644
--- a/hw/i386/fw_cfg.h
+++ b/hw/i386/fw_cfg.h
@@ -25,5 +25,6 @@ FWCfgState *fw_cfg_arch_create(MachineState *ms,
                                uint16_t apic_id_limit);
 void fw_cfg_build_smbios(MachineState *ms, FWCfgState *fw_cfg);
 void fw_cfg_build_feature_control(MachineState *ms, FWCfgState *fw_cfg);
+void fw_cfg_add_acpi_dsdt(Aml *scope, FWCfgState *fw_cfg);
 
 #endif
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 9fed13a27333..86be45eea17c 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -1759,30 +1759,8 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
 
     /* create fw_cfg node, unconditionally */
     {
-        /* when using port i/o, the 8-bit data register *always* overlaps
-         * with half of the 16-bit control register. Hence, the total size
-         * of the i/o region used is FW_CFG_CTL_SIZE; when using DMA, the
-         * DMA control register is located at FW_CFG_DMA_IO_BASE + 4 */
-        uint8_t io_size = object_property_get_bool(OBJECT(x86ms->fw_cfg),
-                                                   "dma_enabled", NULL) ?
-                          ROUND_UP(FW_CFG_CTL_SIZE, 4) + sizeof(dma_addr_t) :
-                          FW_CFG_CTL_SIZE;
-
         scope = aml_scope("\\_SB.PCI0");
-        dev = aml_device("FWCF");
-
-        aml_append(dev, aml_name_decl("_HID", aml_string("QEMU0002")));
-
-        /* device present, functioning, decoding, not shown in UI */
-        aml_append(dev, aml_name_decl("_STA", aml_int(0xB)));
-
-        crs = aml_resource_template();
-        aml_append(crs,
-            aml_io(AML_DECODE16, FW_CFG_IO_BASE, FW_CFG_IO_BASE, 0x01, io_size)
-        );
-        aml_append(dev, aml_name_decl("_CRS", crs));
-
-        aml_append(scope, dev);
+        fw_cfg_add_acpi_dsdt(scope, x86ms->fw_cfg);
         aml_append(dsdt, scope);
     }
 
diff --git a/hw/i386/fw_cfg.c b/hw/i386/fw_cfg.c
index da60ada59462..c55abfb01abb 100644
--- a/hw/i386/fw_cfg.c
+++ b/hw/i386/fw_cfg.c
@@ -15,6 +15,7 @@
 #include "qemu/osdep.h"
 #include "sysemu/numa.h"
 #include "hw/acpi/acpi.h"
+#include "hw/acpi/aml-build.h"
 #include "hw/firmware/smbios.h"
 #include "hw/i386/fw_cfg.h"
 #include "hw/timer/hpet.h"
@@ -179,3 +180,30 @@ void fw_cfg_build_feature_control(MachineState *ms, 
FWCfgState *fw_cfg)
     *val = cpu_to_le64(feature_control_bits | FEATURE_CONTROL_LOCKED);
     fw_cfg_add_file(fw_cfg, "etc/msr_feature_control", val, sizeof(*val));
 }
+
+void fw_cfg_add_acpi_dsdt(Aml *scope, FWCfgState *fw_cfg)
+{
+    /*
+     * when using port i/o, the 8-bit data register *always* overlaps
+     * with half of the 16-bit control register. Hence, the total size
+     * of the i/o region used is FW_CFG_CTL_SIZE; when using DMA, the
+     * DMA control register is located at FW_CFG_DMA_IO_BASE + 4
+     */
+    Object *obj = OBJECT(fw_cfg);
+    uint8_t io_size = object_property_get_bool(obj, "dma_enabled", NULL) ?
+        ROUND_UP(FW_CFG_CTL_SIZE, 4) + sizeof(dma_addr_t) :
+        FW_CFG_CTL_SIZE;
+    Aml *dev = aml_device("FWCF");
+    Aml *crs = aml_resource_template();
+
+    aml_append(dev, aml_name_decl("_HID", aml_string("QEMU0002")));
+
+    /* device present, functioning, decoding, not shown in UI */
+    aml_append(dev, aml_name_decl("_STA", aml_int(0xB)));
+
+    aml_append(crs,
+        aml_io(AML_DECODE16, FW_CFG_IO_BASE, FW_CFG_IO_BASE, 0x01, io_size));
+
+    aml_append(dev, aml_name_decl("_CRS", crs));
+    aml_append(scope, dev);
+}
-- 
2.18.4