[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 14/43] hw/block/nvme: add max_ioqpairs device parameter
From: |
Kevin Wolf |
Subject: |
[PULL 14/43] hw/block/nvme: add max_ioqpairs device parameter |
Date: |
Wed, 17 Jun 2020 16:48:40 +0200 |
From: Klaus Jensen <k.jensen@samsung.com>
The num_queues device paramater has a slightly confusing meaning because
it accounts for the admin queue pair which is not really optional.
Secondly, it is really a maximum value of queues allowed.
Add a new max_ioqpairs parameter that only accounts for I/O queue pairs,
but keep num_queues for compatibility.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-9-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.h | 3 ++-
hw/block/nvme.c | 51 ++++++++++++++++++++++++++++++-------------------
2 files changed, 33 insertions(+), 21 deletions(-)
diff --git a/hw/block/nvme.h b/hw/block/nvme.h
index 91f16c8125..26c38bd913 100644
--- a/hw/block/nvme.h
+++ b/hw/block/nvme.h
@@ -5,7 +5,8 @@
typedef struct NvmeParams {
char *serial;
- uint32_t num_queues;
+ uint32_t num_queues; /* deprecated since 5.1 */
+ uint32_t max_ioqpairs;
uint32_t cmb_size_mb;
} NvmeParams;
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index ee514625ee..1c1d2f8b77 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -20,7 +20,7 @@
* -device nvme,drive=<drive_id>,serial=<serial>,id=<id[optional]>, \
* cmb_size_mb=<cmb_size_mb[optional]>, \
* [pmrdev=<mem_backend_file_id>,] \
- * num_queues=<N[optional]>
+ * max_ioqpairs=<N[optional]>
*
* Note cmb_size_mb denotes size of CMB in MB. CMB is assumed to be at
* offset 0 in BAR2 and supports only WDS, RDS and SQS for now.
@@ -36,6 +36,7 @@
#include "qemu/osdep.h"
#include "qemu/units.h"
+#include "qemu/error-report.h"
#include "hw/block/block.h"
#include "hw/pci/msix.h"
#include "hw/pci/pci.h"
@@ -85,12 +86,12 @@ static void nvme_addr_read(NvmeCtrl *n, hwaddr addr, void
*buf, int size)
static int nvme_check_sqid(NvmeCtrl *n, uint16_t sqid)
{
- return sqid < n->params.num_queues && n->sq[sqid] != NULL ? 0 : -1;
+ return sqid < n->params.max_ioqpairs + 1 && n->sq[sqid] != NULL ? 0 : -1;
}
static int nvme_check_cqid(NvmeCtrl *n, uint16_t cqid)
{
- return cqid < n->params.num_queues && n->cq[cqid] != NULL ? 0 : -1;
+ return cqid < n->params.max_ioqpairs + 1 && n->cq[cqid] != NULL ? 0 : -1;
}
static void nvme_inc_cq_tail(NvmeCQueue *cq)
@@ -656,7 +657,7 @@ static uint16_t nvme_create_cq(NvmeCtrl *n, NvmeCmd *cmd)
trace_pci_nvme_err_invalid_create_cq_vector(vector);
return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
}
- if (unlikely(vector > n->params.num_queues)) {
+ if (unlikely(vector > n->params.max_ioqpairs)) {
trace_pci_nvme_err_invalid_create_cq_vector(vector);
return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
}
@@ -808,8 +809,8 @@ static uint16_t nvme_get_feature(NvmeCtrl *n, NvmeCmd *cmd,
NvmeRequest *req)
trace_pci_nvme_getfeat_vwcache(result ? "enabled" : "disabled");
break;
case NVME_NUMBER_OF_QUEUES:
- result = cpu_to_le32((n->params.num_queues - 2) |
- ((n->params.num_queues - 2) << 16));
+ result = cpu_to_le32((n->params.max_ioqpairs - 1) |
+ ((n->params.max_ioqpairs - 1) << 16));
trace_pci_nvme_getfeat_numq(result);
break;
case NVME_TIMESTAMP:
@@ -853,10 +854,10 @@ static uint16_t nvme_set_feature(NvmeCtrl *n, NvmeCmd
*cmd, NvmeRequest *req)
case NVME_NUMBER_OF_QUEUES:
trace_pci_nvme_setfeat_numq((dw11 & 0xFFFF) + 1,
((dw11 >> 16) & 0xFFFF) + 1,
- n->params.num_queues - 1,
- n->params.num_queues - 1);
- req->cqe.result = cpu_to_le32((n->params.num_queues - 2) |
- ((n->params.num_queues - 2) << 16));
+ n->params.max_ioqpairs,
+ n->params.max_ioqpairs);
+ req->cqe.result = cpu_to_le32((n->params.max_ioqpairs - 1) |
+ ((n->params.max_ioqpairs - 1) << 16));
break;
case NVME_TIMESTAMP:
return nvme_set_feature_timestamp(n, cmd);
@@ -927,12 +928,12 @@ static void nvme_clear_ctrl(NvmeCtrl *n)
blk_drain(n->conf.blk);
- for (i = 0; i < n->params.num_queues; i++) {
+ for (i = 0; i < n->params.max_ioqpairs + 1; i++) {
if (n->sq[i] != NULL) {
nvme_free_sq(n->sq[i], n);
}
}
- for (i = 0; i < n->params.num_queues; i++) {
+ for (i = 0; i < n->params.max_ioqpairs + 1; i++) {
if (n->cq[i] != NULL) {
nvme_free_cq(n->cq[i], n);
}
@@ -1362,8 +1363,17 @@ static void nvme_realize(PCIDevice *pci_dev, Error
**errp)
int64_t bs_size;
uint8_t *pci_conf;
- if (!n->params.num_queues) {
- error_setg(errp, "num_queues can't be zero");
+ if (n->params.num_queues) {
+ warn_report("num_queues is deprecated; please use max_ioqpairs "
+ "instead");
+
+ n->params.max_ioqpairs = n->params.num_queues - 1;
+ }
+
+ if (n->params.max_ioqpairs < 1 ||
+ n->params.max_ioqpairs > PCI_MSIX_FLAGS_QSIZE) {
+ error_setg(errp, "max_ioqpairs must be between 1 and %d",
+ PCI_MSIX_FLAGS_QSIZE);
return;
}
@@ -1413,21 +1423,21 @@ static void nvme_realize(PCIDevice *pci_dev, Error
**errp)
n->num_namespaces = 1;
- /* num_queues is really number of pairs, so each has two doorbells */
+ /* add one to max_ioqpairs to account for the admin queue pair */
n->reg_size = pow2ceil(NVME_REG_SIZE +
- 2 * n->params.num_queues * NVME_DB_SIZE);
+ 2 * (n->params.max_ioqpairs + 1) * NVME_DB_SIZE);
n->ns_size = bs_size / (uint64_t)n->num_namespaces;
n->namespaces = g_new0(NvmeNamespace, n->num_namespaces);
- n->sq = g_new0(NvmeSQueue *, n->params.num_queues);
- n->cq = g_new0(NvmeCQueue *, n->params.num_queues);
+ n->sq = g_new0(NvmeSQueue *, n->params.max_ioqpairs + 1);
+ n->cq = g_new0(NvmeCQueue *, n->params.max_ioqpairs + 1);
memory_region_init_io(&n->iomem, OBJECT(n), &nvme_mmio_ops, n,
"nvme", n->reg_size);
pci_register_bar(pci_dev, 0,
PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64,
&n->iomem);
- msix_init_exclusive_bar(pci_dev, n->params.num_queues, 4, NULL);
+ msix_init_exclusive_bar(pci_dev, n->params.max_ioqpairs + 1, 4, NULL);
id->vid = cpu_to_le16(pci_get_word(pci_conf + PCI_VENDOR_ID));
id->ssvid = cpu_to_le16(pci_get_word(pci_conf + PCI_SUBSYSTEM_VENDOR_ID));
@@ -1573,7 +1583,8 @@ static Property nvme_props[] = {
HostMemoryBackend *),
DEFINE_PROP_STRING("serial", NvmeCtrl, params.serial),
DEFINE_PROP_UINT32("cmb_size_mb", NvmeCtrl, params.cmb_size_mb, 0),
- DEFINE_PROP_UINT32("num_queues", NvmeCtrl, params.num_queues, 64),
+ DEFINE_PROP_UINT32("num_queues", NvmeCtrl, params.num_queues, 0),
+ DEFINE_PROP_UINT32("max_ioqpairs", NvmeCtrl, params.max_ioqpairs, 64),
DEFINE_PROP_END_OF_LIST(),
};
--
2.25.4
- [PULL 01/43] hw/ide: Make IDEDMAOps handlers take a const IDEDMA pointer, (continued)
- [PULL 01/43] hw/ide: Make IDEDMAOps handlers take a const IDEDMA pointer, Kevin Wolf, 2020/06/17
- [PULL 03/43] virtio-blk: Refactor the code that processes queued requests, Kevin Wolf, 2020/06/17
- [PULL 04/43] virtio-blk: On restart, process queued requests in the proper context, Kevin Wolf, 2020/06/17
- [PULL 06/43] qcow2: Tweak comments on qcow2_get_persistent_dirty_bitmap_size, Kevin Wolf, 2020/06/17
- [PULL 05/43] block: Refactor subdirectory recursion during make, Kevin Wolf, 2020/06/17
- [PULL 02/43] icount: make dma reads deterministic, Kevin Wolf, 2020/06/17
- [PULL 10/43] hw/block/nvme: move device parameters to separate struct, Kevin Wolf, 2020/06/17
- [PULL 07/43] hw/block/nvme: fix pci doorbell size calculation, Kevin Wolf, 2020/06/17
- [PULL 09/43] hw/block/nvme: remove superfluous breaks, Kevin Wolf, 2020/06/17
- [PULL 12/43] hw/block/nvme: refactor nvme_addr_read, Kevin Wolf, 2020/06/17
- [PULL 14/43] hw/block/nvme: add max_ioqpairs device parameter,
Kevin Wolf <=
- [PULL 15/43] hw/block/nvme: remove redundant cmbloc/cmbsz members, Kevin Wolf, 2020/06/17
- [PULL 16/43] hw/block/nvme: factor out property/constraint checks, Kevin Wolf, 2020/06/17
- [PULL 13/43] hw/block/nvme: fix pin-based interrupt behavior, Kevin Wolf, 2020/06/17
- [PULL 11/43] hw/block/nvme: use constants in identify, Kevin Wolf, 2020/06/17
- [PULL 18/43] hw/block/nvme: factor out block backend setup, Kevin Wolf, 2020/06/17
- [PULL 17/43] hw/block/nvme: factor out device state setup, Kevin Wolf, 2020/06/17
- [PULL 19/43] hw/block/nvme: add namespace helpers, Kevin Wolf, 2020/06/17
- [PULL 21/43] hw/block/nvme: factor out pci setup, Kevin Wolf, 2020/06/17
- [PULL 24/43] hw/block/nvme: do cmb/pmr init as part of pci init, Kevin Wolf, 2020/06/17
- [PULL 26/43] hw/block/nvme: Verify msix_vector_use() returned value, Kevin Wolf, 2020/06/17