[PATCH 29/39] Makefile: inline the relevant parts of rules.mak

[Paolo Bonzini]

Most of rules.mak is not used anymore, just inline what's needed.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 Makefile                    |  38 +++++----
 docs/devel/build-system.rst |   4 -
 rules.mak                   | 158 ------------------------------------
 tests/tcg/Makefile.qemu     |   2 -
 4 files changed, 22 insertions(+), 180 deletions(-)
 delete mode 100644 rules.mak

diff --git a/Makefile b/Makefile
index 9bdf5fc072..678e76d6f2 100644
--- a/Makefile
+++ b/Makefile
@@ -10,6 +10,20 @@ BUILD_DIR=$(CURDIR)
 # Before including a proper config-host.mak, assume we are in the source tree
 SRC_PATH=.
 
+# Don't use implicit rules or variables
+# we have explicit rules for everything
+MAKEFLAGS += -rR
+
+# Usage: $(call quiet-command,command and args,"NAME","args to print")
+# This will run "command and args", and either:
+#  if V=1 just print the whole command and args
+#  otherwise print the 'quiet' output in the format "  NAME     args to print"
+# NAME should be a short name of the command, 7 letters or fewer.
+# If called with only a single argument, will print nothing in quiet mode.
+quiet-command-run = $(if $(V),,$(if $2,printf "  %-7s %s\n" $2 $3 && ))$1
+quiet-@ = $(if $(V),,@)
+quiet-command = $(quiet-@)$(call quiet-command-run,$1,$2,$3)
+
 UNCHECKED_GOALS := %clean TAGS cscope ctags dist \
     help check-help print-% \
     docker docker-% vm-help vm-test vm-build-%
@@ -68,6 +82,7 @@ Makefile.mtest: build.ninja scripts/mtest2make.py
 -include Makefile.mtest
 endif
 
+Makefile: .git-submodule-status
 .git-submodule-status: git-submodule-update config-host.mak
 
 # Check that we're not trying to do an out-of-tree build from
@@ -108,10 +123,6 @@ ninja-clean::
 ninja-distclean::
 build.ninja: config-host.mak
 
-include $(SRC_PATH)/rules.mak
-
-generated-files-y += .git-submodule-status
-
 # Don't try to regenerate Makefile or configure
 # We don't generate any of them
 Makefile: ;
@@ -120,9 +131,7 @@ configure: ;
 .PHONY: all clean cscope distclean install \
        recurse-all dist msi FORCE
 
-$(call set-vpath, $(SRC_PATH))
-
-SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory --quiet) 
BUILD_DIR=$(BUILD_DIR)
+SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory --quiet)
 
 include $(SRC_PATH)/tests/Makefile.include
 
@@ -189,7 +198,6 @@ clean: recurse-clean ninja-clean clean-ctlist
                -exec rm {} +
        rm -f TAGS cscope.* *.pod *~ */*~
        rm -f fsdev/*.pod scsi/*.pod
-       rm -f $(foreach f,$(generated-files-y),$(f) $(f)-timestamp)
 
 VERSION = $(shell cat $(SRC_PATH)/VERSION)
 
@@ -232,14 +240,6 @@ cscope:
 # Needed by "meson install"
 export DESTDIR
 
-# Add a dependency on the generated files, so that they are always
-# rebuilt before other object files
-ifneq ($(wildcard config-host.mak),)
-ifneq ($(filter-out $(UNCHECKED_GOALS),$(MAKECMDGOALS)),$(if 
$(MAKECMDGOALS),,fail))
-Makefile: $(generated-files-y)
-endif
-endif
-
 include $(SRC_PATH)/tests/docker/Makefile.include
 include $(SRC_PATH)/tests/vm/Makefile.include
 
@@ -280,3 +280,9 @@ endif
 endif
        $(call print-help,$(MAKE) [targets],(quiet build, default))
        $(call print-help,$(MAKE) V=1 [targets],(verbose build))
+
+# will delete the target of a rule if commands exit with a nonzero exit status
+.DELETE_ON_ERROR:
+
+print-%:
+       @echo '$*=$($*)'
diff --git a/docs/devel/build-system.rst b/docs/devel/build-system.rst
index 0c09fb9a54..55f0576c07 100644
--- a/docs/devel/build-system.rst
+++ b/docs/devel/build-system.rst
@@ -401,10 +401,6 @@ number of dynamically created files listed later.
   executables.  Build rules for various subdirectories are included in
   other meson.build files spread throughout the QEMU source tree.
 
-`rules.mak`
-  This file provides the generic helper rules for invoking build tools, in
-  particular the compiler and linker.
-
 `tests/Makefile.include`
   Rules for building the unit tests. This file is included directly by the
   top level Makefile, so anything defined in this file will influence the
diff --git a/rules.mak b/rules.mak
deleted file mode 100644
index c66c8218f0..0000000000
--- a/rules.mak
+++ /dev/null
@@ -1,158 +0,0 @@
-
-# These are used when we want to do substitutions without confusing Make
-NULL  :=
-SPACE := $(NULL) #
-COMMA := ,
-
-# Don't use implicit rules or variables
-# we have explicit rules for everything
-MAKEFLAGS += -rR
-
-# Files with this suffixes are final, don't try to generate them
-# using implicit rules
-%/trace-events:
-%.hx:
-%.py:
-%.objs:
-%.d:
-%.h:
-%.c:
-%.cc:
-%.cpp:
-%.m:
-%.mak:
-
-# Flags for dependency generation
-QEMU_DGFLAGS += -MMD -MP -MT $@ -MF $(@D)/$(*F).d
-
-# Compiler searches the source file dir first, but in vpath builds
-# we need to make it search the build dir too, before any other
-# explicit search paths. There are two search locations in the build
-# dir, one absolute and the other relative to the compiler working
-# directory. These are the same for target-independent files, but
-# different for target-dependent ones.
-QEMU_LOCAL_INCLUDES = -iquote $(BUILD_DIR) -iquote $(BUILD_DIR)/$(@D) -iquote 
$(@D)
-
-WL := -Wl,
-ifdef CONFIG_DARWIN
-whole-archive = $(WL)-force_load,$1
-else
-whole-archive = $(WL)--whole-archive $1 $(WL)--no-whole-archive
-endif
-
-extract-libs = $(strip $(foreach o,$1,$($o-libs)))
-
-%.o: %.c
-       @mkdir -p $(dir $@)
-       $(call quiet-command,$(CC) $(QEMU_LOCAL_INCLUDES) $(QEMU_INCLUDES) \
-              $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) $($@-cflags) \
-              -c -o $@ $<,"CC","$(TARGET_DIR)$@")
-
-# If we have a CXX we might have some C++ objects, in which case we
-# must link with the C++ compiler, not the plain C compiler.
-LINKPROG = $(or $(CXX),$(CC))
-
-LINK = $(call quiet-command, $(LINKPROG) $(CFLAGS) $(QEMU_LDFLAGS) -o $@ \
-       $(filter-out %.a %.fa,$1) \
-       $(foreach l,$(filter %.fa,$1),$(call whole-archive,$l)) \
-       $(filter %.a,$1) \
-       $(call extract-libs,$1) $(LIBS),"LINK","$(TARGET_DIR)$@")
-
-%.o: %.S
-       $(call quiet-command,$(CCAS) $(QEMU_LOCAL_INCLUDES) $(QEMU_INCLUDES) \
-              $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) \
-              -c -o $@ $<,"CCAS","$(TARGET_DIR)$@")
-
-%.o: %.cc
-       $(call quiet-command,$(CXX) $(QEMU_LOCAL_INCLUDES) $(QEMU_INCLUDES) \
-              $(QEMU_CXXFLAGS) $(QEMU_DGFLAGS) $(CXXFLAGS) $($@-cflags) \
-              -c -o $@ $<,"CXX","$(TARGET_DIR)$@")
-
-%.o: %.cpp
-       $(call quiet-command,$(CXX) $(QEMU_LOCAL_INCLUDES) $(QEMU_INCLUDES) \
-              $(QEMU_CXXFLAGS) $(QEMU_DGFLAGS) $(CXXFLAGS) $($@-cflags) \
-              -c -o $@ $<,"CXX","$(TARGET_DIR)$@")
-
-%.o: %.m
-       $(call quiet-command,$(OBJCC) $(QEMU_LOCAL_INCLUDES) $(QEMU_INCLUDES) \
-              $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) $($@-cflags) \
-              -c -o $@ $<,"OBJC","$(TARGET_DIR)$@")
-
-%.o: %.dtrace
-       $(call quiet-command,dtrace -o $@ -G -s $<,"GEN","$(TARGET_DIR)$@")
-
-.PHONY: modules
-modules:
-
-%$(EXESUF): %.o
-       $(call LINK,$(filter %.o %.a %.fa, $^))
-
-%.a:
-       $(call quiet-command,rm -f $@ && $(AR) rcs $@ $^,"AR","$(TARGET_DIR)$@")
-
-# Usage: $(call quiet-command,command and args,"NAME","args to print")
-# This will run "command and args", and either:
-#  if V=1 just print the whole command and args
-#  otherwise print the 'quiet' output in the format "  NAME     args to print"
-# NAME should be a short name of the command, 7 letters or fewer.
-# If called with only a single argument, will print nothing in quiet mode.
-quiet-command-run = $(if $(V),,$(if $2,printf "  %-7s %s\n" $2 $3 && ))$1
-quiet-@ = $(if $(V),,@)
-quiet-command = $(quiet-@)$(call quiet-command-run,$1,$2,$3)
-
-# cc-option
-# Usage: CFLAGS+=$(call cc-option, -falign-functions=0, -malign-functions=0)
-
-cc-option = $(if $(shell $(CC) $1 $2 -S -o /dev/null -xc /dev/null \
-              >/dev/null 2>&1 && echo OK), $2, $3)
-cc-c-option = $(if $(shell $(CC) $1 $2 -c -o /dev/null -xc /dev/null \
-                >/dev/null 2>&1 && echo OK), $2, $3)
-
-VPATH_SUFFIXES = %.c %.h %.S %.cc %.cpp %.m %.mak %.texi %.sh %.rc Kconfig% 
%.json.in
-set-vpath = $(if $1,$(foreach PATTERN,$(VPATH_SUFFIXES),$(eval vpath 
$(PATTERN) $1)))
-
-# install-prog list, dir
-define install-prog
-       $(INSTALL_DIR) "$2"
-       $(INSTALL_PROG) $1 "$2"
-       $(if $(STRIP),$(STRIP) $(foreach T,$1,"$2/$(notdir $T)"),)
-endef
-
-# Logical functions (for operating on y/n values like CONFIG_FOO vars)
-# Inputs to these must be either "y" (true) or "n" or "" (both false)
-# Output is always either "y" or "n".
-# Usage: $(call land,$(CONFIG_FOO),$(CONFIG_BAR))
-# Logical NOT
-lnot = $(if $(subst n,,$1),n,y)
-# Logical AND
-land = $(if $(findstring yy,$1$2),y,n)
-# Logical OR
-lor = $(if $(findstring y,$1$2),y,n)
-# Logical XOR (note that this is the inverse of leqv)
-lxor = $(if $(filter $(call lnot,$1),$(call lnot,$2)),n,y)
-# Logical equivalence (note that leqv "","n" is true)
-leqv = $(if $(filter $(call lnot,$1),$(call lnot,$2)),y,n)
-# Logical if: like make's $(if) but with an leqv-like test
-lif = $(if $(subst n,,$1),$2,$3)
-
-# String testing functions: inputs to these can be any string;
-# the output is always either "y" or "n". Leading and trailing whitespace
-# is ignored when comparing strings.
-# String equality
-eq = $(if $(subst $2,,$1)$(subst $1,,$2),n,y)
-# String inequality
-ne = $(if $(subst $2,,$1)$(subst $1,,$2),y,n)
-# Emptiness/non-emptiness tests:
-isempty = $(if $1,n,y)
-notempty = $(if $1,y,n)
-
-.PHONY: clean-timestamp
-clean-timestamp:
-       rm -f *.timestamp
-clean: clean-timestamp
-
-# will delete the target of a rule if commands exit with a nonzero exit status
-.DELETE_ON_ERROR:
-
-print-%:
-       @echo '$*=$($*)'
diff --git a/tests/tcg/Makefile.qemu b/tests/tcg/Makefile.qemu
index f8ad4c47be..0332bad10f 100644
--- a/tests/tcg/Makefile.qemu
+++ b/tests/tcg/Makefile.qemu
@@ -8,8 +8,6 @@
 # to do it for us.
 #
 
-include $(SRC_PATH)/rules.mak
-
 # The configure script fills in extra information about
 # useful docker images or alternative compiler flags.
 
-- 
2.26.2