[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 3/9] tests/acpi: add a new ACPI table in order to test root p
|
From: |
Igor Mammedov |
|
Subject: |
Re: [PATCH 3/9] tests/acpi: add a new ACPI table in order to test root pci hotplug on/off |
|
Date: |
Mon, 14 Sep 2020 13:58:58 +0200 |
On Fri, 11 Sep 2020 23:37:49 +0530
Ani Sinha <ani@anisinha.ca> wrote:
> A new binary ACPI table tests/data/acpi/pc/DSDT.roothp is added in order
> to unit test hotplug on/off capability on the root pci bus for i440fx.
> The diff between the table DSDT.bridge and DSDT.roothp is listed below:
Acked-by: Igor Mammedov <imammedo@redhat.com>
> @@ -1,30 +1,30 @@
> /*
> * Intel ACPI Component Architecture
> * AML/ASL+ Disassembler version 20180105 (64-bit version)
> * Copyright (c) 2000 - 2018 Intel Corporation
> *
> * Disassembling to symbolic ASL+ operators
> *
> - * Disassembly of tests/data/acpi/pc/DSDT.bridge, Fri Sep 11 22:51:04 2020
> + * Disassembly of /tmp/aml-UGIHQ0, Fri Sep 11 22:51:04 2020
> *
> * Original Table Header:
> * Signature "DSDT"
> - * Length 0x00001A89 (6793)
> + * Length 0x0000140A (5130)
> * Revision 0x01 **** 32-bit table (V1), no 64-bit math support
> - * Checksum 0x09
> + * Checksum 0xE6
> * OEM ID "BOCHS "
> * OEM Table ID "BXPCDSDT"
> * OEM Revision 0x00000001 (1)
> * Compiler ID "BXPC"
> * Compiler Version 0x00000001 (1)
> */
> DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
> {
> Scope (\)
> {
> OperationRegion (DBG, SystemIO, 0x0402, One)
> Field (DBG, ByteAcc, NoLock, Preserve)
> {
> DBGB, 8
> }
>
> @@ -831,61 +831,60 @@
> Name (_CRS, ResourceTemplate () // _CRS: Current Resource
> Settings
> {
> IO (Decode16,
> 0x0510, // Range Minimum
> 0x0510, // Range Maximum
> 0x01, // Alignment
> 0x0C, // Length
> )
> })
> }
> }
>
> Scope (\_SB)
> {
> Scope (PCI0)
> {
> - Name (BSEL, Zero)
> Device (S00)
> {
> Name (_ADR, Zero) // _ADR: Address
> }
>
> Device (S10)
> {
> Name (_ADR, 0x00020000) // _ADR: Address
> Method (_S1D, 0, NotSerialized) // _S1D: S1 Device State
> {
> Return (Zero)
> }
>
> Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
> {
> Return (Zero)
> }
>
> Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
> {
> Return (Zero)
> }
> }
>
> Device (S18)
> {
> Name (_ADR, 0x00030000) // _ADR: Address
> - Name (BSEL, One)
> + Name (BSEL, Zero)
> Device (S00)
> {
> Name (_SUN, Zero) // _SUN: Slot User Number
> Name (_ADR, Zero) // _ADR: Address
> Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> {
> PCEJ (BSEL, _SUN)
> }
> }
>
> Device (S08)
> {
> Name (_SUN, One) // _SUN: Slot User Number
> Name (_ADR, 0x00010000) // _ADR: Address
> Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> {
> @@ -1345,456 +1344,30 @@
> Notify (SE8, Arg1)
> }
>
> If ((Arg0 & 0x40000000))
> {
> Notify (SF0, Arg1)
> }
>
> If ((Arg0 & 0x80000000))
> {
> Notify (SF8, Arg1)
> }
> }
>
> Method (PCNT, 0, NotSerialized)
> {
> - BNUM = One
> + BNUM = Zero
> DVNT (PCIU, One)
> DVNT (PCID, 0x03)
> }
> }
>
> - Device (S20)
> - {
> - Name (_SUN, 0x04) // _SUN: Slot User Number
> - Name (_ADR, 0x00040000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (S28)
> - {
> - Name (_SUN, 0x05) // _SUN: Slot User Number
> - Name (_ADR, 0x00050000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (S30)
> - {
> - Name (_SUN, 0x06) // _SUN: Slot User Number
> - Name (_ADR, 0x00060000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (S38)
> - {
> - Name (_SUN, 0x07) // _SUN: Slot User Number
> - Name (_ADR, 0x00070000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (S40)
> - {
> - Name (_SUN, 0x08) // _SUN: Slot User Number
> - Name (_ADR, 0x00080000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (S48)
> - {
> - Name (_SUN, 0x09) // _SUN: Slot User Number
> - Name (_ADR, 0x00090000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (S50)
> - {
> - Name (_SUN, 0x0A) // _SUN: Slot User Number
> - Name (_ADR, 0x000A0000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (S58)
> - {
> - Name (_SUN, 0x0B) // _SUN: Slot User Number
> - Name (_ADR, 0x000B0000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (S60)
> - {
> - Name (_SUN, 0x0C) // _SUN: Slot User Number
> - Name (_ADR, 0x000C0000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (S68)
> - {
> - Name (_SUN, 0x0D) // _SUN: Slot User Number
> - Name (_ADR, 0x000D0000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (S70)
> - {
> - Name (_SUN, 0x0E) // _SUN: Slot User Number
> - Name (_ADR, 0x000E0000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (S78)
> - {
> - Name (_SUN, 0x0F) // _SUN: Slot User Number
> - Name (_ADR, 0x000F0000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (S80)
> - {
> - Name (_SUN, 0x10) // _SUN: Slot User Number
> - Name (_ADR, 0x00100000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (S88)
> - {
> - Name (_SUN, 0x11) // _SUN: Slot User Number
> - Name (_ADR, 0x00110000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (S90)
> - {
> - Name (_SUN, 0x12) // _SUN: Slot User Number
> - Name (_ADR, 0x00120000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (S98)
> - {
> - Name (_SUN, 0x13) // _SUN: Slot User Number
> - Name (_ADR, 0x00130000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (SA0)
> - {
> - Name (_SUN, 0x14) // _SUN: Slot User Number
> - Name (_ADR, 0x00140000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (SA8)
> - {
> - Name (_SUN, 0x15) // _SUN: Slot User Number
> - Name (_ADR, 0x00150000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (SB0)
> - {
> - Name (_SUN, 0x16) // _SUN: Slot User Number
> - Name (_ADR, 0x00160000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (SB8)
> - {
> - Name (_SUN, 0x17) // _SUN: Slot User Number
> - Name (_ADR, 0x00170000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (SC0)
> - {
> - Name (_SUN, 0x18) // _SUN: Slot User Number
> - Name (_ADR, 0x00180000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (SC8)
> - {
> - Name (_SUN, 0x19) // _SUN: Slot User Number
> - Name (_ADR, 0x00190000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (SD0)
> - {
> - Name (_SUN, 0x1A) // _SUN: Slot User Number
> - Name (_ADR, 0x001A0000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (SD8)
> - {
> - Name (_SUN, 0x1B) // _SUN: Slot User Number
> - Name (_ADR, 0x001B0000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (SE0)
> - {
> - Name (_SUN, 0x1C) // _SUN: Slot User Number
> - Name (_ADR, 0x001C0000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (SE8)
> - {
> - Name (_SUN, 0x1D) // _SUN: Slot User Number
> - Name (_ADR, 0x001D0000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (SF0)
> - {
> - Name (_SUN, 0x1E) // _SUN: Slot User Number
> - Name (_ADR, 0x001E0000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Device (SF8)
> - {
> - Name (_SUN, 0x1F) // _SUN: Slot User Number
> - Name (_ADR, 0x001F0000) // _ADR: Address
> - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
> - {
> - PCEJ (BSEL, _SUN)
> - }
> - }
> -
> - Method (DVNT, 2, NotSerialized)
> - {
> - If ((Arg0 & 0x10))
> - {
> - Notify (S20, Arg1)
> - }
> -
> - If ((Arg0 & 0x20))
> - {
> - Notify (S28, Arg1)
> - }
> -
> - If ((Arg0 & 0x40))
> - {
> - Notify (S30, Arg1)
> - }
> -
> - If ((Arg0 & 0x80))
> - {
> - Notify (S38, Arg1)
> - }
> -
> - If ((Arg0 & 0x0100))
> - {
> - Notify (S40, Arg1)
> - }
> -
> - If ((Arg0 & 0x0200))
> - {
> - Notify (S48, Arg1)
> - }
> -
> - If ((Arg0 & 0x0400))
> - {
> - Notify (S50, Arg1)
> - }
> -
> - If ((Arg0 & 0x0800))
> - {
> - Notify (S58, Arg1)
> - }
> -
> - If ((Arg0 & 0x1000))
> - {
> - Notify (S60, Arg1)
> - }
> -
> - If ((Arg0 & 0x2000))
> - {
> - Notify (S68, Arg1)
> - }
> -
> - If ((Arg0 & 0x4000))
> - {
> - Notify (S70, Arg1)
> - }
> -
> - If ((Arg0 & 0x8000))
> - {
> - Notify (S78, Arg1)
> - }
> -
> - If ((Arg0 & 0x00010000))
> - {
> - Notify (S80, Arg1)
> - }
> -
> - If ((Arg0 & 0x00020000))
> - {
> - Notify (S88, Arg1)
> - }
> -
> - If ((Arg0 & 0x00040000))
> - {
> - Notify (S90, Arg1)
> - }
> -
> - If ((Arg0 & 0x00080000))
> - {
> - Notify (S98, Arg1)
> - }
> -
> - If ((Arg0 & 0x00100000))
> - {
> - Notify (SA0, Arg1)
> - }
> -
> - If ((Arg0 & 0x00200000))
> - {
> - Notify (SA8, Arg1)
> - }
> -
> - If ((Arg0 & 0x00400000))
> - {
> - Notify (SB0, Arg1)
> - }
> -
> - If ((Arg0 & 0x00800000))
> - {
> - Notify (SB8, Arg1)
> - }
> -
> - If ((Arg0 & 0x01000000))
> - {
> - Notify (SC0, Arg1)
> - }
> -
> - If ((Arg0 & 0x02000000))
> - {
> - Notify (SC8, Arg1)
> - }
> -
> - If ((Arg0 & 0x04000000))
> - {
> - Notify (SD0, Arg1)
> - }
> -
> - If ((Arg0 & 0x08000000))
> - {
> - Notify (SD8, Arg1)
> - }
> -
> - If ((Arg0 & 0x10000000))
> - {
> - Notify (SE0, Arg1)
> - }
> -
> - If ((Arg0 & 0x20000000))
> - {
> - Notify (SE8, Arg1)
> - }
> -
> - If ((Arg0 & 0x40000000))
> - {
> - Notify (SF0, Arg1)
> - }
> -
> - If ((Arg0 & 0x80000000))
> - {
> - Notify (SF8, Arg1)
> - }
> - }
> -
> Method (PCNT, 0, NotSerialized)
> {
> - BNUM = Zero
> - DVNT (PCIU, One)
> - DVNT (PCID, 0x03)
> ^S18.PCNT ()
> }
> }
> }
> }
>
> Signed-off-by: Ani Sinha <ani@anisinha.ca>
> ---
> tests/data/acpi/pc/DSDT.roothp | Bin 0 -> 5130 bytes
> tests/qtest/bios-tables-test-allowed-diff.h | 1 -
> 2 files changed, 1 deletion(-)
> create mode 100644 tests/data/acpi/pc/DSDT.roothp
>
> diff --git a/tests/data/acpi/pc/DSDT.roothp b/tests/data/acpi/pc/DSDT.roothp
> new file mode 100644
> index
> 0000000000000000000000000000000000000000..886a5e6952f6f034bdd80d44d43de5975a1a4b0f
> GIT binary patch
> literal 5130
> zcmb7IQEwZ^5uPQF@^O!pj?&q3tT-lQyJ?cbCMj8Q&=-++6iG{@&OFL(aYFAXDJT^L
> z$iaz=C`wS80Tjn?f$E|UeP9eeTR)-w3Hb@>OMgI$#(D}nbH}A<iU%YFc-ooy?wgt2
> z+1V8h%V=;7fc>Yish6#E;rFI)ppF3mjp?sik+#8Z8-<d?l!(Oa$BIA3M?uzpV-&VZ
> z?C&l2Z?5~vS1xOMu=8Afw$t>!eB$l^fgbI6oYO#EbgY77cNR>&l98Qq#Yp78<5Ahk
> z8+DMKt%?C^RSqykxoj320>ltRX1iTB8&yaEeD{+AlKogEdG0~6W~9x!;iR<{$7<xk
> zBaQ2ks`;7ARkxe?=GcW}SLyeA(4GF~xCwu4Cg9)yi}j$#XJkjOTd5SEK8j<;NDdOf
> z0jR&aMbS{WcIQgP$~%6n=$>IH=5j`laF<JJZT@yt010Jxme&ggf`b&J7(GTM++5}t
> zOUwlq7%Q<o*u%ez5%gwvZd5n7hHuTxz4DgKV~d~?Dle}Y`f&a(;LK6*3;c44{Sf^j
> z3Q~!^jJ}KlTU>>=C7(FEwqfSQJg*s**|Z8g#y5F}@e>~5H}N~m7kHn4$baNBT$Y_R
> zqnMiK8dbpPCxU|A$!(a8tVmA^){earuF8`o_G$Ffs4OqG{TOokW_9>Z4AHot6W%$E
> zo<>1lRQ-2u)*Je8LX<(KKD7rPFnJLeu2NY(Tc)<DTMeeb3oc`Ikf7u8ZKd&Hr0up<
> zyoXgRzu;Iq3JH24Q@n?ULakb7iW(S5&<nM#YT9On4SgN7o2Fj87qPFC)bD#OGI|GW
> zALw=aO;Yzjtzq>Q9Ce*j#b^e1%z6X7*+|><p!vKIf7aw}@3SV4z>atLu(<;~3cFqP
> zco#u&thkNZx&eFL8^^n>n>ucCX{fef@7v^1$|ERsyvrj)O<|yk4mCRLd0!mta22rT
> z;mIC=ci2RKPxcsidr#aZJZkn_`|*w2QHqwzmI|7g_4^qaA6a_j=&>YgbCvrztKIk^
> zZ?|y2#Cu%PRx0=PdK>}uOlq1dUr#~YFO~y%N;)3HXQit=YhlhU8uv(TcQ!6ynplj%
> z-bmoyqn$0|Tv@40eD3RMh(}{sWgNc>eh)yK@i%pkf}rrUlw(vZ_=3i~?Q3Re4*(+c
> zx-ZW=R^4JxTR{}q2<jEm54;z~yki;uZ133-?^)k_7ULWBp4BFM&)S_T<*tu;=aFCF
> zJ~!e%=ey61xzB~T&kfug<L<FL{p{?QM%*v??w7{gFNL^YvOAj+W^awVmjd^qgs1`I
> zlE;H3$2yzx7h6+;Ii^riMXRfB_}k6y=zROE|C;sU&;_6Jiz}&{Tj}ygpLicW`cwMh
> z`yYSw=;7}BAA`+wb7OtbRFa&R7@WWfOJI-1qVl`Q2~XIMual66v~Ct_Os~`|rq`<v
> z7&e3q14-Ab2DX}60!4MJxRFMrk#D56gj1<iWDiJ*$-lGhcPWe|h%cGf%}OSd%}@lv
> zQ5e%wdSmSmkuE=O!I7THWcIc46!x%u+`hhjTM}ms<w&tpCmL6yGY{PEmE&;(Mep$$
> z*M9SyWn;bPYSkEJ^vfKvaVlh($gh>BbxW_wVQDb;d0sho8HVn`I4RC>w<MiQ$X^MZ
> zu5ma{KJ(5+hG>tu->ysD@_8zMJttG~=y@)LBiH0at8snPY9zuEow#1-g2jxz{Rw$_
> zJTk5&=m+CUoPvqb*<aqJs=_UXA1qL;EV)PZg*8~sH&P0hL8jXcTBjY%L!o4#wf}*(
> zfaO~<i%v0<!v*rMJ5<WFs_LdhCVyiOsyed*+Ixu20!_s5augh&BMMWm`H{YYP<1WX
> zD|9dgx0_YY|M4UV5xjcgr%w;OJe?*^6HG=uOGHWa63wTHp`65n58%IF%>x8>I#l|7
> zI#lQr0pB8SIC8)L&z}OzzkYoB&e=PGj$r+M|1Sa_XrWDi=~kvoI0eD2ENRxvOdh8o
> z=su($X*<C+NeS}u+s^kV-=8pvNbX5y*{lZ>`6>xc#e^1io(o>U3#Q?v=&fyZZ!I~q
> zQxe0NalGuz$`W4m@Ct|09kNjH>Tk~`+wR<2`<=cP1aQAt-NItY5gKo=qY<kyHAan6
> zt$e=iUwQJM(^}ab#mZ!YOEPBjwv`<SxGoXUkSA+E&mZK(V2K9U9{+4*?*?xo7;k_D
> zY-Fgv5fEBiH4KCPPtax^YP@tGBZz|*yYp)+LoeePk8(sI1)Gd~D~Jh^bnFID3~drA
> zLI<RS|55zFLZCUylvwdN3s|Kv)|_CC31}<~x+GZfAPZQhLZO27f`DEKgDwkJyyge2
> zawt@=#sxGU2E8L#xq$Les9?pK3Ib5VpeuqkA)tv+s9;SBXfh1?u3()O(CJX9V8x4S
> z5bI1B^sZo41yl`%3f7c>roy1_3D#KwoehNwR{Ym7h;=Runis6ND+8z&3Kgsu1@vMV
> zv>;e73FxIzs9>EJ(D^W^E?6%M=;ctTV0}$MUkig8g7u1kUI~Q?)&&7w2!j>{>+1sg
> zdMH$|UKP-*VbC?f`i6kM5egNo*97$1B&b%qYCNblB3<RM#o&m#?0z?K*uv8Rg}Vbm
> zLIHbtV3A1>78M2Td4VNOg0QTjfPE{lv`HXK^01{~Pd>7+`3xlTv^=ztD{LVH8~M63
> zw2?Dx1Opp+TN&EO9d74=jr_e!wwc40e+ZzA+fvAQ^r3ua#{=-l!VM<uc=tj1%&wA*
> zTSeH@zI<k1B^ire*xSB*X7@A3@)dSG1&=I!#7<dbAr9@7w=rU;%(0|~_B6>O_EnUz
> qIEMB%$!OQE(aj2fBcUHEXrb|V-eQA+!J``fG=la&-l7$y;r{_Geabxm
>
> literal 0
> HcmV?d00001
>
> diff --git a/tests/qtest/bios-tables-test-allowed-diff.h
> b/tests/qtest/bios-tables-test-allowed-diff.h
> index ac864fc982..dfb8523c8b 100644
> --- a/tests/qtest/bios-tables-test-allowed-diff.h
> +++ b/tests/qtest/bios-tables-test-allowed-diff.h
> @@ -1,2 +1 @@
> /* List of comma-separated changed AML files to ignore */
> -"tests/data/acpi/pc/DSDT.roothp",
- [PATCH 1/9] tests/acpi: document addition of table DSDT.roothp for unit testing root pci hotplug on/off, Ani Sinha, 2020/09/11
- [PATCH 2/9] tests/acpi: add a new unit test to test hotplug off/on feature on the root pci bus, Ani Sinha, 2020/09/11
- [PATCH 3/9] tests/acpi: add a new ACPI table in order to test root pci hotplug on/off, Ani Sinha, 2020/09/11
- Re: [PATCH 3/9] tests/acpi: add a new ACPI table in order to test root pci hotplug on/off,
Igor Mammedov <=
- [PATCH 4/9] Fix a gap where acpi_pcihp_find_hotplug_bus() returns a non-hotpluggable bus, Ani Sinha, 2020/09/11
- [PATCH 5/9] i440fx/acpi: do not add hotplug related amls for cold plugged bridges, Ani Sinha, 2020/09/11
- [PATCH 6/9] tests/acpi: list added acpi table binary file for pci bridge hotplug test, Ani Sinha, 2020/09/11
- [PATCH 7/9] tests/acpi: unit test for 'acpi-pci-hotplug-with-bridge-support' bridge flag, Ani Sinha, 2020/09/11