qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH V3 06/10] linux-user/: fix some comment spelling errors


From: Laurent Vivier
Subject: Re: [PATCH V3 06/10] linux-user/: fix some comment spelling errors
Date: Thu, 17 Sep 2020 20:39:29 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.11.0

Le 17/09/2020 à 09:50, zhaolichang a écrit :
> I found that there are many spelling errors in the comments of qemu,
> so I used the spellcheck tool to check the spelling errors
> and finally found some spelling errors in the linux-user folder.
> 
> Signed-off-by: zhaolichang <zhaolichang@huawei.com>
> Reviewed-by: Alex Bennee <alex.bennee@linaro.org>
> ---
>  linux-user/aarch64/signal.c              | 2 +-
>  linux-user/cris/target_syscall.h         | 4 ++--
>  linux-user/flat.h                        | 2 +-
>  linux-user/flatload.c                    | 4 ++--
>  linux-user/host/ppc64/safe-syscall.inc.S | 2 +-
>  linux-user/syscall.c                     | 4 ++--
>  6 files changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c
> index cd521ee42d..d50c1ae583 100644
> --- a/linux-user/aarch64/signal.c
> +++ b/linux-user/aarch64/signal.c
> @@ -78,7 +78,7 @@ struct target_sve_context {
>      struct target_aarch64_ctx head;
>      uint16_t vl;
>      uint16_t reserved[3];
> -    /* The actual SVE data immediately follows.  It is layed out
> +    /* The actual SVE data immediately follows.  It is laid out
>       * according to TARGET_SVE_SIG_{Z,P}REG_OFFSET, based off of
>       * the original struct pointer.
>       */
> diff --git a/linux-user/cris/target_syscall.h 
> b/linux-user/cris/target_syscall.h
> index d109a6b42a..19e1281403 100644
> --- a/linux-user/cris/target_syscall.h
> +++ b/linux-user/cris/target_syscall.h
> @@ -4,7 +4,7 @@
>  #define UNAME_MACHINE "cris"
>  #define UNAME_MINIMUM_RELEASE "2.6.32"
>  
> -/* pt_regs not only specifices the format in the user-struct during
> +/* pt_regs not only specifies the format in the user-struct during
>   * ptrace but is also the frame format used in the kernel prologue/epilogues
>   * themselves
>   */
> @@ -32,7 +32,7 @@ struct target_pt_regs {
>          unsigned long spc;
>          unsigned long ccs;
>          unsigned long srp;
> -        unsigned long erp; /* This is actually the debugged process' PC */
> +        unsigned long erp; /* This is actually the debugged process's PC */
>          /* For debugging purposes; saved only when needed. */
>          unsigned long exs;
>          unsigned long eda;
> diff --git a/linux-user/flat.h b/linux-user/flat.h
> index 1e44b33443..ed518e2013 100644
> --- a/linux-user/flat.h
> +++ b/linux-user/flat.h
> @@ -43,7 +43,7 @@ struct flat_hdr {
>       abi_ulong reloc_count;  /* Number of relocation records */
>       abi_ulong flags;
>       abi_ulong build_date;   /* When the program/library was built */
> -     abi_ulong filler[5];    /* Reservered, set to zero */
> +     abi_ulong filler[5];    /* Reserved, set to zero */
>  };
>  
>  #define FLAT_FLAG_RAM    0x0001 /* load program entirely into RAM */
> diff --git a/linux-user/flatload.c b/linux-user/flatload.c
> index 8fb448f0bf..14d2999d15 100644
> --- a/linux-user/flatload.c
> +++ b/linux-user/flatload.c
> @@ -442,7 +442,7 @@ static int load_flat_file(struct linux_binprm * bprm,
>      indx_len = (indx_len + 15) & ~(abi_ulong)15;
>  
>      /*
> -     * Alloate the address space.
> +     * Allocate the address space.
>       */
>      probe_guest_base(bprm->filename, 0,
>                       text_len + data_len + extra + indx_len);
> @@ -794,7 +794,7 @@ int load_flt_binary(struct linux_binprm *bprm, struct 
> image_info *info)
>  #error here
>      for (i = MAX_SHARED_LIBS-1; i>0; i--) {
>              if (libinfo[i].loaded) {
> -                    /* Push previos first to call address */
> +                    /* Push previous first to call address */
>                      --sp;
>                      if (put_user_ual(start_addr, sp))
>                          return -EFAULT;
> diff --git a/linux-user/host/ppc64/safe-syscall.inc.S 
> b/linux-user/host/ppc64/safe-syscall.inc.S
> index 8ed73a5b86..875133173b 100644
> --- a/linux-user/host/ppc64/safe-syscall.inc.S
> +++ b/linux-user/host/ppc64/safe-syscall.inc.S
> @@ -84,7 +84,7 @@ safe_syscall_end:
>  
>       /* code path when we didn't execute the syscall */
>  0:   addi    3, 0, -TARGET_ERESTARTSYS
> -     ld 14, 16(1) /* restore r14 to its orginal value */
> +     ld 14, 16(1) /* restore r14 to its original value */
>       blr
>       .cfi_endproc
>  
> diff --git a/linux-user/syscall.c b/linux-user/syscall.c
> index 55ac5c3208..897d20c076 100644
> --- a/linux-user/syscall.c
> +++ b/linux-user/syscall.c
> @@ -481,7 +481,7 @@ _syscall4(int, sys_prlimit64, pid_t, pid, int, resource,
>  
>  
>  #if defined(TARGET_NR_timer_create)
> -/* Maxiumum of 32 active POSIX timers allowed at any one time. */
> +/* Maximum of 32 active POSIX timers allowed at any one time. */
>  static timer_t g_posix_timers[32] = { 0, } ;
>  
>  static inline int next_free_host_timer(void)
> @@ -8180,7 +8180,7 @@ static abi_long do_syscall1(void *cpu_env, int num, 
> abi_long arg1,
>      switch(num) {
>      case TARGET_NR_exit:
>          /* In old applications this may be used to implement _exit(2).
> -           However in threaded applictions it is used for thread termination,
> +           However in threaded applications it is used for thread 
> termination,
>             and _exit_group is used for application termination.
>             Do thread termination if we have more then one thread.  */
>  
> 

Applied to my trivial-patches branch.

Thanks,
Laurent




reply via email to

[Prev in Thread] Current Thread [Next in Thread]