qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PULL 06/15] vhost: recheck dev state in the vhost_migration_log routine


From: Michael S. Tsirkin
Subject: [PULL 06/15] vhost: recheck dev state in the vhost_migration_log routine
Date: Fri, 18 Sep 2020 11:06:05 -0400

From: Dima Stepanov <dimastep@yandex-team.ru>

vhost-user devices can get a disconnect in the middle of the VHOST-USER
handshake on the migration start. If disconnect event happened right
before sending next VHOST-USER command, then the vhost_dev_set_log()
call in the vhost_migration_log() function will return error. This error
will lead to the assert() and close the QEMU migration source process.
For the vhost-user devices the disconnect event should not break the
migration process, because:
  - the device will be in the stopped state, so it will not be changed
    during migration
  - if reconnect will be made the migration log will be reinitialized as
    part of reconnect/init process:
    #0  vhost_log_global_start (listener=0x563989cf7be0)
    at hw/virtio/vhost.c:920
    #1  0x000056398603d8bc in listener_add_address_space 
(listener=0x563989cf7be0,
        as=0x563986ea4340 <address_space_memory>)
    at softmmu/memory.c:2664
    #2  0x000056398603dd30 in memory_listener_register (listener=0x563989cf7be0,
        as=0x563986ea4340 <address_space_memory>)
    at softmmu/memory.c:2740
    #3  0x0000563985fd6956 in vhost_dev_init (hdev=0x563989cf7bd8,
        opaque=0x563989cf7e30, backend_type=VHOST_BACKEND_TYPE_USER,
        busyloop_timeout=0)
    at hw/virtio/vhost.c:1385
    #4  0x0000563985f7d0b8 in vhost_user_blk_connect (dev=0x563989cf7990)
    at hw/block/vhost-user-blk.c:315
    #5  0x0000563985f7d3f6 in vhost_user_blk_event (opaque=0x563989cf7990,
        event=CHR_EVENT_OPENED)
    at hw/block/vhost-user-blk.c:379
Update the vhost-user-blk device with the internal started_vu field which
will be used for initialization (vhost_user_blk_start) and clean up
(vhost_user_blk_stop). This additional flag in the VhostUserBlk structure
will be used to track whether the device really needs to be stopped and
cleaned up on a vhost-user level.
The disconnect event will set the overall VHOST device (not vhost-user) to
the stopped state, so it can be used by the general vhost_migration_log
routine.
Such approach could be propogated to the other vhost-user devices, but
better idea is just to make the same connect/disconnect code for all the
vhost-user devices.

This migration issue was slightly discussed earlier:
  - https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg01509.html
  - https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg05241.html

Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Message-Id: 
<a35178fe9e90d2552990a6b359a626e0a40d8b17.1598865610.git.dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/hw/virtio/vhost-user-blk.h | 10 ++++++++++
 hw/block/vhost-user-blk.c          | 19 ++++++++++++++++---
 hw/virtio/vhost.c                  | 27 ++++++++++++++++++++++++---
 3 files changed, 50 insertions(+), 6 deletions(-)

diff --git a/include/hw/virtio/vhost-user-blk.h 
b/include/hw/virtio/vhost-user-blk.h
index dc40ab6f11..5d86ff2e87 100644
--- a/include/hw/virtio/vhost-user-blk.h
+++ b/include/hw/virtio/vhost-user-blk.h
@@ -42,7 +42,17 @@ struct VHostUserBlk {
     VhostUserState vhost_user;
     struct vhost_virtqueue *vhost_vqs;
     VirtQueue **virtqs;
+
+    /*
+     * There are at least two steps of initialization of the
+     * vhost-user device. The first is a "connect" step and
+     * second is a "start" step. Make a separation between
+     * those initialization phases by using two fields.
+     */
+    /* vhost_user_blk_connect/vhost_user_blk_disconnect */
     bool connected;
+    /* vhost_user_blk_start/vhost_user_blk_stop */
+    bool started_vu;
 };
 
 #endif
diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c
index 39aec42dae..a076b1e54d 100644
--- a/hw/block/vhost-user-blk.c
+++ b/hw/block/vhost-user-blk.c
@@ -150,6 +150,7 @@ static int vhost_user_blk_start(VirtIODevice *vdev)
         error_report("Error starting vhost: %d", -ret);
         goto err_guest_notifiers;
     }
+    s->started_vu = true;
 
     /* guest_notifier_mask/pending not used yet, so just unmask
      * everything here. virtio-pci will do the right thing by
@@ -175,6 +176,11 @@ static void vhost_user_blk_stop(VirtIODevice *vdev)
     VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
     int ret;
 
+    if (!s->started_vu) {
+        return;
+    }
+    s->started_vu = false;
+
     if (!k->set_guest_notifiers) {
         return;
     }
@@ -341,9 +347,7 @@ static void vhost_user_blk_disconnect(DeviceState *dev)
     }
     s->connected = false;
 
-    if (s->dev.started) {
-        vhost_user_blk_stop(vdev);
-    }
+    vhost_user_blk_stop(vdev);
 
     vhost_dev_cleanup(&s->dev);
 }
@@ -399,6 +403,15 @@ static void vhost_user_blk_event(void *opaque, 
QEMUChrEvent event)
                     NULL, NULL, false);
             aio_bh_schedule_oneshot(ctx, vhost_user_blk_chr_closed_bh, opaque);
         }
+
+        /*
+         * Move vhost device to the stopped state. The vhost-user device
+         * will be clean up and disconnected in BH. This can be useful in
+         * the vhost migration code. If disconnect was caught there is an
+         * option for the general vhost code to get the dev state without
+         * knowing its type (in this case vhost-user).
+         */
+        s->dev.started = false;
         break;
     case CHR_EVENT_BREAK:
     case CHR_EVENT_MUX_IN:
diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
index e986bf53e4..1b2d735b54 100644
--- a/hw/virtio/vhost.c
+++ b/hw/virtio/vhost.c
@@ -871,21 +871,42 @@ static int vhost_migration_log(MemoryListener *listener, 
bool enable)
         dev->log_enabled = enable;
         return 0;
     }
+
+    r = 0;
     if (!enable) {
         r = vhost_dev_set_log(dev, false);
         if (r < 0) {
-            return r;
+            goto check_dev_state;
         }
         vhost_log_put(dev, false);
     } else {
         vhost_dev_log_resize(dev, vhost_get_log_size(dev));
         r = vhost_dev_set_log(dev, true);
         if (r < 0) {
-            return r;
+            goto check_dev_state;
         }
     }
+
+check_dev_state:
     dev->log_enabled = enable;
-    return 0;
+    /*
+     * vhost-user-* devices could change their state during log
+     * initialization due to disconnect. So check dev state after
+     * vhost communication.
+     */
+    if (!dev->started) {
+        /*
+         * Since device is in the stopped state, it is okay for
+         * migration. Return success.
+         */
+        r = 0;
+    }
+    if (r) {
+        /* An error is occured. */
+        dev->log_enabled = false;
+    }
+
+    return r;
 }
 
 static void vhost_log_global_start(MemoryListener *listener)
-- 
MST




reply via email to

[Prev in Thread] Current Thread [Next in Thread]