qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH] arm/hvf: Optimize and simplify WFI handling


From: Peter Collingbourne
Subject: Re: [PATCH] arm/hvf: Optimize and simplify WFI handling
Date: Tue, 1 Dec 2020 20:44:27 -0800

On Tue, Dec 1, 2020 at 5:53 PM Alexander Graf <agraf@csgraf.de> wrote:
>
>
> On 02.12.20 02:19, Peter Collingbourne wrote:
> > On Tue, Dec 1, 2020 at 2:04 PM Alexander Graf <agraf@csgraf.de> wrote:
> >>
> >> On 01.12.20 19:59, Peter Collingbourne wrote:
> >>> On Tue, Dec 1, 2020 at 3:16 AM Alexander Graf <agraf@csgraf.de> wrote:
> >>>> Hi Peter,
> >>>>
> >>>> On 01.12.20 09:21, Peter Collingbourne wrote:
> >>>>> Sleep on WFx until the VTIMER is due but allow ourselves to be woken
> >>>>> up on IPI.
> >>>>>
> >>>>> Signed-off-by: Peter Collingbourne <pcc@google.com>
> >>>> Thanks a bunch!
> >>>>
> >>>>
> >>>>> ---
> >>>>> Alexander Graf wrote:
> >>>>>> I would love to take a patch from you here :). I'll still be stuck for 
> >>>>>> a
> >>>>>> while with the sysreg sync rework that Peter asked for before I can 
> >>>>>> look
> >>>>>> at WFI again.
> >>>>> Okay, here's a patch :) It's a relatively straightforward adaptation
> >>>>> of what we have in our fork, which can now boot Android to GUI while
> >>>>> remaining at around 4% CPU when idle.
> >>>>>
> >>>>> I'm not set up to boot a full Linux distribution at the moment so I
> >>>>> tested it on upstream QEMU by running a recent mainline Linux kernel
> >>>>> with a rootfs containing an init program that just does sleep(5)
> >>>>> and verified that the qemu process remains at low CPU usage during
> >>>>> the sleep. This was on top of your v2 plus the last patch of your v1
> >>>>> since it doesn't look like you have a replacement for that logic yet.
> >>>>>
> >>>>>     accel/hvf/hvf-cpus.c     |  5 +--
> >>>>>     include/sysemu/hvf_int.h |  3 +-
> >>>>>     target/arm/hvf/hvf.c     | 94 
> >>>>> +++++++++++-----------------------------
> >>>>>     3 files changed, 28 insertions(+), 74 deletions(-)
> >>>>>
> >>>>> diff --git a/accel/hvf/hvf-cpus.c b/accel/hvf/hvf-cpus.c
> >>>>> index 4360f64671..b2c8fb57f6 100644
> >>>>> --- a/accel/hvf/hvf-cpus.c
> >>>>> +++ b/accel/hvf/hvf-cpus.c
> >>>>> @@ -344,9 +344,8 @@ static int hvf_init_vcpu(CPUState *cpu)
> >>>>>         sigact.sa_handler = dummy_signal;
> >>>>>         sigaction(SIG_IPI, &sigact, NULL);
> >>>>>
> >>>>> -    pthread_sigmask(SIG_BLOCK, NULL, &set);
> >>>>> -    sigdelset(&set, SIG_IPI);
> >>>>> -    pthread_sigmask(SIG_SETMASK, &set, NULL);
> >>>>> +    pthread_sigmask(SIG_BLOCK, NULL, &cpu->hvf->unblock_ipi_mask);
> >>>>> +    sigdelset(&cpu->hvf->unblock_ipi_mask, SIG_IPI);
> >>>> What will this do to the x86 hvf implementation? We're now not
> >>>> unblocking SIG_IPI again for that, right?
> >>> Yes and that was the case before your patch series.
> >>
> >> The way I understand Roman, he wanted to unblock the IPI signal on x86:
> >>
> >> https://patchwork.kernel.org/project/qemu-devel/patch/20201126215017.41156-3-agraf@csgraf.de/#23807021
> >>
> >> I agree that at this point it's not a problem though to break it again.
> >> I'm not quite sure how to merge your patches within my patch set though,
> >> given they basically revert half of my previously introduced code...
> >>
> >>
> >>>>>     #ifdef __aarch64__
> >>>>>         r = hv_vcpu_create(&cpu->hvf->fd, (hv_vcpu_exit_t 
> >>>>> **)&cpu->hvf->exit, NULL);
> >>>>> diff --git a/include/sysemu/hvf_int.h b/include/sysemu/hvf_int.h
> >>>>> index c56baa3ae8..13adf6ea77 100644
> >>>>> --- a/include/sysemu/hvf_int.h
> >>>>> +++ b/include/sysemu/hvf_int.h
> >>>>> @@ -62,8 +62,7 @@ extern HVFState *hvf_state;
> >>>>>     struct hvf_vcpu_state {
> >>>>>         uint64_t fd;
> >>>>>         void *exit;
> >>>>> -    struct timespec ts;
> >>>>> -    bool sleeping;
> >>>>> +    sigset_t unblock_ipi_mask;
> >>>>>     };
> >>>>>
> >>>>>     void assert_hvf_ok(hv_return_t ret);
> >>>>> diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c
> >>>>> index 8fe10966d2..60a361ff38 100644
> >>>>> --- a/target/arm/hvf/hvf.c
> >>>>> +++ b/target/arm/hvf/hvf.c
> >>>>> @@ -2,6 +2,7 @@
> >>>>>      * QEMU Hypervisor.framework support for Apple Silicon
> >>>>>
> >>>>>      * Copyright 2020 Alexander Graf <agraf@csgraf.de>
> >>>>> + * Copyright 2020 Google LLC
> >>>>>      *
> >>>>>      * This work is licensed under the terms of the GNU GPL, version 2 
> >>>>> or later.
> >>>>>      * See the COPYING file in the top-level directory.
> >>>>> @@ -18,6 +19,7 @@
> >>>>>     #include "sysemu/hw_accel.h"
> >>>>>
> >>>>>     #include <Hypervisor/Hypervisor.h>
> >>>>> +#include <mach/mach_time.h>
> >>>>>
> >>>>>     #include "exec/address-spaces.h"
> >>>>>     #include "hw/irq.h"
> >>>>> @@ -320,18 +322,8 @@ int hvf_arch_init_vcpu(CPUState *cpu)
> >>>>>
> >>>>>     void hvf_kick_vcpu_thread(CPUState *cpu)
> >>>>>     {
> >>>>> -    if (cpu->hvf->sleeping) {
> >>>>> -        /*
> >>>>> -         * When sleeping, make sure we always send signals. Also, 
> >>>>> clear the
> >>>>> -         * timespec, so that an IPI that arrives between setting 
> >>>>> hvf->sleeping
> >>>>> -         * and the nanosleep syscall still aborts the sleep.
> >>>>> -         */
> >>>>> -        cpu->thread_kicked = false;
> >>>>> -        cpu->hvf->ts = (struct timespec){ };
> >>>>> -        cpus_kick_thread(cpu);
> >>>>> -    } else {
> >>>>> -        hv_vcpus_exit(&cpu->hvf->fd, 1);
> >>>>> -    }
> >>>>> +    cpus_kick_thread(cpu);
> >>>>> +    hv_vcpus_exit(&cpu->hvf->fd, 1);
> >>>> This means your first WFI will almost always return immediately due to a
> >>>> pending signal, because there probably was an IRQ pending before on the
> >>>> same CPU, no?
> >>> That's right. Any approach involving the "sleeping" field would need
> >>> to be implemented carefully to avoid races that may result in missed
> >>> wakeups so for simplicity I just decided to send both kinds of
> >>> wakeups. In particular the approach in the updated patch you sent is
> >>> racy and I'll elaborate more in the reply to that patch.
> >>>
> >>>>>     }
> >>>>>
> >>>>>     static int hvf_inject_interrupts(CPUState *cpu)
> >>>>> @@ -385,18 +377,19 @@ int hvf_vcpu_exec(CPUState *cpu)
> >>>>>             uint64_t syndrome = hvf_exit->exception.syndrome;
> >>>>>             uint32_t ec = syn_get_ec(syndrome);
> >>>>>
> >>>>> +        qemu_mutex_lock_iothread();
> >>>> Is there a particular reason you're moving the iothread lock out again
> >>>> from the individual bits? I would really like to keep a notion of fast
> >>>> path exits.
> >>> We still need to lock at least once no matter the exit reason to check
> >>> the interrupts so I don't think it's worth it to try and avoid locking
> >>> like this. It also makes the implementation easier to reason about and
> >>> therefore more likely to be correct. In our implementation we just
> >>> stay locked the whole time unless we're in hv_vcpu_run() or pselect().
> >>>
> >>>>>             switch (exit_reason) {
> >>>>>             case HV_EXIT_REASON_EXCEPTION:
> >>>>>                 /* This is the main one, handle below. */
> >>>>>                 break;
> >>>>>             case HV_EXIT_REASON_VTIMER_ACTIVATED:
> >>>>> -            qemu_mutex_lock_iothread();
> >>>>>                 current_cpu = cpu;
> >>>>>                 qemu_set_irq(arm_cpu->gt_timer_outputs[GTIMER_VIRT], 1);
> >>>>>                 qemu_mutex_unlock_iothread();
> >>>>>                 continue;
> >>>>>             case HV_EXIT_REASON_CANCELED:
> >>>>>                 /* we got kicked, no exit to process */
> >>>>> +            qemu_mutex_unlock_iothread();
> >>>>>                 continue;
> >>>>>             default:
> >>>>>                 assert(0);
> >>>>> @@ -413,7 +406,6 @@ int hvf_vcpu_exec(CPUState *cpu)
> >>>>>                 uint32_t srt = (syndrome >> 16) & 0x1f;
> >>>>>                 uint64_t val = 0;
> >>>>>
> >>>>> -            qemu_mutex_lock_iothread();
> >>>>>                 current_cpu = cpu;
> >>>>>
> >>>>>                 DPRINTF("data abort: [pc=0x%llx va=0x%016llx 
> >>>>> pa=0x%016llx isv=%x "
> >>>>> @@ -446,8 +438,6 @@ int hvf_vcpu_exec(CPUState *cpu)
> >>>>>                     hvf_set_reg(cpu, srt, val);
> >>>>>                 }
> >>>>>
> >>>>> -            qemu_mutex_unlock_iothread();
> >>>>> -
> >>>>>                 advance_pc = true;
> >>>>>                 break;
> >>>>>             }
> >>>>> @@ -493,68 +483,36 @@ int hvf_vcpu_exec(CPUState *cpu)
> >>>>>             case EC_WFX_TRAP:
> >>>>>                 if (!(syndrome & WFX_IS_WFE) && 
> >>>>> !(cpu->interrupt_request &
> >>>>>                     (CPU_INTERRUPT_HARD | CPU_INTERRUPT_FIQ))) {
> >>>>> -                uint64_t cval, ctl, val, diff, now;
> >>>>> +                uint64_t cval;
> >>>>>
> >>>>> -                /* Set up a local timer for vtimer if necessary ... */
> >>>>> -                r = hv_vcpu_get_sys_reg(cpu->hvf->fd, 
> >>>>> HV_SYS_REG_CNTV_CTL_EL0, &ctl);
> >>>>> -                assert_hvf_ok(r);
> >>>>>                     r = hv_vcpu_get_sys_reg(cpu->hvf->fd, 
> >>>>> HV_SYS_REG_CNTV_CVAL_EL0, &cval);
> >>>>>                     assert_hvf_ok(r);
> >>>>>
> >>>>> -                asm volatile("mrs %0, cntvct_el0" : "=r"(val));
> >>>>> -                diff = cval - val;
> >>>>> -
> >>>>> -                now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) /
> >>>>> -                      gt_cntfrq_period_ns(arm_cpu);
> >>>>> -
> >>>>> -                /* Timer disabled or masked, just wait for long */
> >>>>> -                if (!(ctl & 1) || (ctl & 2)) {
> >>>>> -                    diff = (120 * NANOSECONDS_PER_SECOND) /
> >>>>> -                           gt_cntfrq_period_ns(arm_cpu);
> >>>>> +                int64_t ticks_to_sleep = cval - mach_absolute_time();
> >>>>> +                if (ticks_to_sleep < 0) {
> >>>>> +                    break;
> >>>> This will loop at 100% for Windows, which configures the vtimer as
> >>>> cval=0 ctl=7, so with IRQ mask bit set.
> >>> Okay, but the 120s is kind of arbitrary so we should just sleep until
> >>> we get a signal. That can be done by passing null as the timespec
> >>> argument to pselect().
> >>
> >> The reason I capped it at 120s was so that if I do hit a race, you don't
> >> break everything forever. Only for 2 minutes :).
> > I see. I think at this point we want to notice these types of bugs if
> > they exist instead of hiding them, so I would mildly be in favor of
> > not capping at 120s.
>
>
> Crossing my fingers that we are at that point already :).
>
>
> >
> >>>> Alex
> >>>>
> >>>>
> >>>>>                     }
> >>>>>
> >>>>> -                if (diff < INT64_MAX) {
> >>>>> -                    uint64_t ns = diff * gt_cntfrq_period_ns(arm_cpu);
> >>>>> -                    struct timespec *ts = &cpu->hvf->ts;
> >>>>> -
> >>>>> -                    *ts = (struct timespec){
> >>>>> -                        .tv_sec = ns / NANOSECONDS_PER_SECOND,
> >>>>> -                        .tv_nsec = ns % NANOSECONDS_PER_SECOND,
> >>>>> -                    };
> >>>>> -
> >>>>> -                    /*
> >>>>> -                     * Waking up easily takes 1ms, don't go to sleep 
> >>>>> for smaller
> >>>>> -                     * time periods than 2ms.
> >>>>> -                     */
> >>>>> -                    if (!ts->tv_sec && (ts->tv_nsec < (SCALE_MS * 2))) 
> >>>>> {
> >>>> I put this logic here on purpose. A pselect(1 ns) easily takes 1-2ms to
> >>>> return. Without logic like this, super short WFIs will hurt performance
> >>>> quite badly.
> >>> I don't think that's accurate. According to this benchmark it's a few
> >>> hundred nanoseconds at most.
> >>>
> >>> pcc@pac-mini /tmp> cat pselect.c
> >>> #include <signal.h>
> >>> #include <sys/select.h>
> >>>
> >>> int main() {
> >>>     sigset_t mask, orig_mask;
> >>>     pthread_sigmask(SIG_SETMASK, 0, &mask);
> >>>     sigaddset(&mask, SIGUSR1);
> >>>     pthread_sigmask(SIG_SETMASK, &mask, &orig_mask);
> >>>
> >>>     for (int i = 0; i != 1000000; ++i) {
> >>>       struct timespec ts = { 0, 1 };
> >>>       pselect(0, 0, 0, 0, &ts, &orig_mask);
> >>>     }
> >>> }
> >>> pcc@pac-mini /tmp> time ./pselect
> >>>
> >>> ________________________________________________________
> >>> Executed in  179.87 millis    fish           external
> >>>      usr time   77.68 millis   57.00 micros   77.62 millis
> >>>      sys time  101.37 millis  852.00 micros  100.52 millis
> >>>
> >>> Besides, all that you're really saving here is the single pselect
> >>> call. There are no doubt more expensive syscalls involved in exiting
> >>> and entering the VCPU that would dominate here.
> >>
> >> I would expect that such a super low ts value has a short-circuit path
> >> in the kernel as well. Where things start to fall apart is when you're
> >> at a threshold where rescheduling might be ok, but then you need to take
> >> all of the additional task switch overhead into account. Try to adapt
> >> your test code a bit:
> >>
> >> #include <signal.h>
> >> #include <sys/select.h>
> >>
> >> int main() {
> >>     sigset_t mask, orig_mask;
> >>     pthread_sigmask(SIG_SETMASK, 0, &mask);
> >>     sigaddset(&mask, SIGUSR1);
> >>     pthread_sigmask(SIG_SETMASK, &mask, &orig_mask);
> >>
> >>     for (int i = 0; i != 10000; ++i) {
> >> #define SCALE_MS 1000000
> >>       struct timespec ts = { 0, SCALE_MS / 10 };
> >>       pselect(0, 0, 0, 0, &ts, &orig_mask);
> >>     }
> >> }
> >>
> >>
> >> % time ./pselect
> >> ./pselect  0.00s user 0.01s system 1% cpu 1.282 total
> >>
> >> You're suddenly seeing 300µs overhead per pselect call then. When I
> >> measured actual enter/exit times in QEMU, I saw much bigger differences
> >> between "time I want to sleep for" and "time I did sleep" even when just
> >> capturing the virtual time before and after the nanosleep/pselect call.
> > Okay. So the alternative is that we spin on the CPU, either doing
> > no-op VCPU entries/exits or something like:
> >
> > while (mach_absolute_time() < cval);
>
>
> This won't catch events that arrive during that time, such as
> interrupts, right? I'd just declare the WFI as done and keep looping in
> and out of the guest for now.

Oh, that's a good point.

> > My intuition is we shouldn't try to subvert the OS scheduler like this
> > unless it's proven to help with some real world metric since otherwise
> > we're not being fair to the other processes on the CPU. With CPU
> > intensive workloads I wouldn't expect these kinds of sleeps to happen
> > very often if at all so if it's only microbenchmarks and so on that
> > are affected then my inclination is not to do this for now.
>
>
> The problem is that the VM's OS is expecting bare metal timer behavior
> usually. And that gives you much better granularities than what we can
> achieve with a virtualization layer on top. So I do feel strongly about
> leaving this bit in. In the workloads you describe above, you won't ever
> hit that branch anyway.
>
> The workloads that benefit from logic like this are message passing
> ones. Check out this presentation from a KVM colleague of yours for details:
>
> https://www.linux-kvm.org/images/a/ac/02x03-Davit_Matalack-KVM_Message_passing_Performance.pdf
>    https://www.youtube.com/watch?v=p85FFrloLFg

Mm, okay. I personally would not add anything like that at this point
without real-world data but I don't feel too strongly and I suppose
the implementation can always be adjusted later.

Peter



reply via email to

[Prev in Thread] Current Thread [Next in Thread]