qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v2] tests/acceptance: Add a test with the Fedora 31 kernel an


From: Thomas Huth
Subject: Re: [PATCH v2] tests/acceptance: Add a test with the Fedora 31 kernel and initrd
Date: Mon, 21 Dec 2020 14:27:35 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.4.0

On 18/12/2020 16.05, Wainer dos Santos Moschetta wrote:
> Hi,
> 
> On 12/17/20 5:53 AM, Thomas Huth wrote:
>> This initrd contains a virtio-net and a virtio-gpu kernel module,
>> so we can check that we can set a MAC address for the network device
>> and whether we can hot-plug and -unplug a virtio-crypto device.
>> But the most interesting part is maybe that we can also successfully
>> write some stuff into the emulated framebuffer of the virtio-gpu
>> device and make sure that we can read back that data from a screenshot.
>>
>> Signed-off-by: Thomas Huth <thuth@redhat.com>
>> ---
>>   Based-on: 20201215183623.110128-1-thuth@redhat.com
>>
>>   v2:
>>   - Uncompress the initrd on the host already to speed up the test
>>   - Disable plymouth to seepd up the test
>>   - Check for device numbers
>>   - Added virtio-crypto test
>>   - Added ":avocado: tags=device:" lines
>>
>>   tests/acceptance/machine_s390_ccw_virtio.py | 111 ++++++++++++++++++++
>>   1 file changed, 111 insertions(+)
>>
>> diff --git a/tests/acceptance/machine_s390_ccw_virtio.py
>> b/tests/acceptance/machine_s390_ccw_virtio.py
>> index abe25a08f0..a9a0f8a8e2 100644
>> --- a/tests/acceptance/machine_s390_ccw_virtio.py
>> +++ b/tests/acceptance/machine_s390_ccw_virtio.py
>> @@ -9,10 +9,14 @@
>>   # This work is licensed under the terms of the GNU GPL, version 2 or
>>   # later.  See the COPYING file in the top-level directory.
>>   +import os
>> +import re
> 're' is not used.

Right, leftover from a first try to parse the screendump file. Will remove it.

>> +import tempfile
>>     from avocado_qemu import Test
>>   from avocado_qemu import exec_command_and_wait_for_pattern
>>   from avocado_qemu import wait_for_console_pattern
>> +from avocado.utils import archive
>>     class S390CCWVirtioMachine(Test):
>>       KERNEL_COMMON_COMMAND_LINE = 'printk.time=0 '
>> @@ -150,3 +154,110 @@ class S390CCWVirtioMachine(Test):
>>           self.vm.command('human-monitor-command', command_line='balloon
>> 128')
>>           exec_command_and_wait_for_pattern(self, 'head -n 1 /proc/meminfo',
>>                                             'MemTotal:         115640 kB')
>> +
>> +
>> +    def test_s390x_fedora(self):
>> +
>> +        """
>> +        :avocado: tags=arch:s390x
>> +        :avocado: tags=machine:s390-ccw-virtio
>> +        :avocado: tags=device:virtio-gpu
>> +        :avocado: tags=device:virtio-crypto
>> +        :avocado: tags=device:virtio-net
>> +        """
>> +
>> +        kernel_url = ('https://archives.fedoraproject.org/pub/archive'
>> +                      '/fedora-secondary/releases/31/Server/s390x/os'
>> +                      '/images/kernel.img')
>> +        kernel_hash = 'b93d1efcafcf29c1673a4ce371a1f8b43941cfeb'
>> +        kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
>> +
>> +        initrd_url = ('https://archives.fedoraproject.org/pub/archive'
>> +                      '/fedora-secondary/releases/31/Server/s390x/os'
>> +                      '/images/initrd.img')
>> +        initrd_hash = '3de45d411df5624b8d8ef21cd0b44419ab59b12f'
>> +        initrd_path_xz = self.fetch_asset(initrd_url,
>> asset_hash=initrd_hash)
>> +        initrd_path = os.path.join(self.workdir, 'initrd-raw.img')
>> +        archive.lzma_uncompress(initrd_path_xz, initrd_path)
>> +
>> +        self.vm.set_console()
>> +        kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + ' audit=0 '
>> +                              'rd.plymouth=0 plymouth.enable=0 rd.rescue')
>> +        self.vm.add_args('-nographic',
>> +                         '-smp', '4',
>> +                         '-m', '512',
>> +                         '-name', 'Some Guest Name',
>> +                         '-uuid', '30de4fd9-b4d5-409e-86a5-09b387f70bfa',
>> +                         '-kernel', kernel_path,
>> +                         '-initrd', initrd_path,
>> +                         '-append', kernel_command_line,
>> +                         '-device', 'zpci,uid=7,target=n',
>> +                         '-device',
>> 'virtio-net-pci,id=n,mac=02:ca:fe:fa:ce:12',
>> +                         '-device', 'virtio-rng-ccw,devno=fe.1.9876',
>> +                         '-device', 'virtio-gpu-ccw,devno=fe.2.5432')
>> +        self.vm.launch()
>> +        self.wait_for_console_pattern('Entering emergency mode')
>> +
>> +        # Some tests to see whether the CLI options have been considered:
>> +        exec_command_and_wait_for_pattern(self, 'lspci',
>> +                             '0007:00:00.0 Class 0200: Device 1af4:1000')
>> +        exec_command_and_wait_for_pattern(self,
>> +                             'cat /sys/class/net/enP7p0s0/address',
>> +                             '02:ca:fe:fa:ce:12')
>> +        exec_command_and_wait_for_pattern(self, 'ls /sys/bus/ccw/devices/',
>> +                             '0.1.9876')
>> +        exec_command_and_wait_for_pattern(self, 'ls /sys/bus/ccw/devices/',
>> +                             '0.2.5432')
>> +        exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo',
>> +                             'processors    : 4')
>> +        exec_command_and_wait_for_pattern(self, 'grep MemTotal
>> /proc/meminfo',
>> +                             'MemTotal:         499848 kB')
>> +        exec_command_and_wait_for_pattern(self, 'grep Name /proc/sysinfo',
>> +                             'Extended Name:   Some Guest Name')
>> +        exec_command_and_wait_for_pattern(self, 'grep UUID /proc/sysinfo',
>> +                             '30de4fd9-b4d5-409e-86a5-09b387f70bfa')
>> +
>> +        # Disable blinking cursor, then write some stuff into the
>> framebuffer.
>> +        # QEMU's PPM screendumps contain uncompressed 24-bit values,
>> while the
>> +        # framebuffer uses 32-bit, so we pad our text with some spaces when
>> +        # writing to the framebuffer. Since the PPM is uncompressed, we then
>> +        # can simply read the written "magic bytes" back from the PPM
>> file to
>> +        # check whether the framebuffer is working as expected.
>> +        exec_command_and_wait_for_pattern(self,
>> +            'echo -e "\e[?25l" > /dev/tty0', ':/#')
>> +        exec_command_and_wait_for_pattern(self, 'for ((i=0;i<250;i++)); do '
>> +            'echo " The  qu ick  fo x j ump s o ver  a  laz y d og" >>
>> fox.txt;'
>> +            'done',
>> +            ':/#')
>> +        exec_command_and_wait_for_pattern(self,
>> +            'dd if=fox.txt of=/dev/fb0 bs=1000 oflag=sync,nocache ; rm
>> fox.txt',
>> +            '12+0 records out')
>> +        tmpfile = tempfile.NamedTemporaryFile(suffix='.ppm',
>> +                                              prefix='qemu-scrdump-')
>> +        self.vm.command('screendump', filename=tmpfile.name)
>> +        ppmfile = open(tmpfile.name, "r")
>> +        tmpfile.close
>> +        line = ppmfile.readline()
>> +        self.assertEqual(line, "P6\n")
>> +        line = ppmfile.readline()
>> +        self.assertEqual(line, "1024 768\n")
>> +        line = ppmfile.readline()
>> +        self.assertEqual(line, "255\n")
>> +        line = ppmfile.readline()
>> +        self.assertEqual(line, "The quick fox jumps over a lazy dog\n")
>> +        ppmfile.close
> 
> In case you don't want to deal with 2 tmp files (and manually close them),
> here goes a suggestion:
> 
>         with tempfile.NamedTemporaryFile(suffix='.ppm',
>                 prefix='qemu-scrdump-') as ppmfile:
>             self.vm.command('screendump', filename=ppmfile.name)
>             ppmfile.seek(0)
>             line = ppmfile.readline()
>             self.assertEqual(line, b"P6\n")
>             line = ppmfile.readline()
>             self.assertEqual(line, b"1024 768\n")
>             line = ppmfile.readline()
>             self.assertEqual(line, b"255\n")
>             line = ppmfile.readline()
>             self.assertEqual(line, b"The quick fox jumps over a lazy dog\n")

Nice, seems to work, thanks, I'll use that instead.

>> +
>> +        # Hot-plug a virtio-crypto device and see whether it gets accepted
> 
> Yet another suggestion. The other day Cornelia asked how to make it easier
> to debug those asserts since it's being tested various conditions on a
> single test method (for the sake of speed). One simple thing would be print
> 'info' to the test logs, e.g.:
> 
> self.log.info("Test hot-plug virtio-crypto device")

Good idea, I'll add some of these log statements!

> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>

Thanks!

 Thomas




reply via email to

[Prev in Thread] Current Thread [Next in Thread]