Re: [PATCH v2 1/2] ppc: Fix build with --without-default-devices

[Paolo Bonzini]

Why? It's all KVM.

Paolo

Il gio 24 dic 2020, 11:58 Philippe Mathieu-Daudé <f4bug@amsat.org> ha scritto:

On 12/23/20 8:26 PM, Greg Kurz wrote:
> Linking of the qemu-system-ppc64 fails on a POWER9 host when
> --without-default-devices is passed to configure:
>
> $ ./configure --without-default-devices \
>               --target-list=ppc64-softmmu && make
>
> ...
>
> libqemu-ppc64-softmmu.fa.p/hw_ppc_e500.c.o: In function `ppce500_init_mpic_kvm':
> /home/greg/Work/qemu/qemu-ppc/build/../hw/ppc/e500.c:777: undefined reference to `kvm_openpic_connect_vcpu'
> libqemu-ppc64-softmmu.fa.p/hw_ppc_spapr_irq.c.o: In function `spapr_irq_check':
> /home/greg/Work/qemu/qemu-ppc/build/../hw/ppc/spapr_irq.c:189: undefined reference to `xics_kvm_has_broken_disconnect'
> libqemu-ppc64-softmmu.fa.p/hw_intc_spapr_xive.c.o: In function `spapr_xive_post_load':
> /home/greg/Work/qemu/qemu-ppc/build/../hw/intc/spapr_xive.c:530: undefined reference to `kvmppc_xive_post_load'
>
> ... and tons of other symbols belonging to the KVM backend of the
> openpic, XICS and XIVE interrupt controllers.
>
> It turns out that OPENPIC_KVM, XICS_KVM and XIVE_KVM are marked
> to depend on KVM but this has no effect when minikconf runs in
> allnoconfig mode. Such reverse dependencies should rather be
> handled with a 'select' statement, eg.
>
> config OPENPIC
>     select OPENPIC_KVM if KVM
>
> or even better by getting rid of the intermediate _KVM config
> and directly checking CONFIG_KVM in the meson.build file:
>
> specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_OPENPIC'],
>               if_true: files('openpic_kvm.c'))
>
> Go for the latter with OPENPIC, XICS and XIVE. While here also move
> XIVE_SPAPR to hw/intc/Kconfig where it belongs.
>
> This went unnoticed so far because CI doesn't test the build with
> --without-default-devices and KVM enabled on a POWER host.
>
> Signed-off-by: Greg Kurz <groug@kaod.org>
> ---
> v2: - check CONFIG_KVM in the meson.build as suggested by Paolo
> ---
>  hw/intc/Kconfig     |   14 +++++---------
>  hw/intc/meson.build |    9 ++++++---
>  hw/ppc/Kconfig      |   15 ---------------
>  3 files changed, 11 insertions(+), 27 deletions(-)
>
> diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig
> index 468d548ca771..ee60d4bf7857 100644
> --- a/hw/intc/Kconfig
> +++ b/hw/intc/Kconfig
> @@ -30,23 +30,19 @@ config ARM_GIC_KVM
>      default y
>      depends on ARM_GIC && KVM
> 
> -config OPENPIC_KVM
> -    bool
> -    default y
> -    depends on OPENPIC && KVM
> -
>  config XICS
>      bool
> -    depends on POWERNV || PSERIES
> 
>  config XICS_SPAPR
>      bool
>      select XICS
> 
> -config XICS_KVM
> +config XIVE
>      bool
> -    default y
> -    depends on XICS && KVM
> +
> +config XIVE_SPAPR
> +    bool
> +    select XIVE
> 
>  config ALLWINNER_A10_PIC
>      bool
> diff --git a/hw/intc/meson.build b/hw/intc/meson.build
> index 68da782ad2c5..b6c9218908e3 100644
> --- a/hw/intc/meson.build
> +++ b/hw/intc/meson.build
> @@ -39,7 +39,8 @@ specific_ss.add(when: 'CONFIG_LOONGSON_LIOINTC', if_true: files('loongson_lioint
>  specific_ss.add(when: 'CONFIG_MIPS_CPS', if_true: files('mips_gic.c'))
>  specific_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_intc.c'))
>  specific_ss.add(when: 'CONFIG_OMPIC', if_true: files('ompic.c'))
> -specific_ss.add(when: 'CONFIG_OPENPIC_KVM', if_true: files('openpic_kvm.c'))
> +specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_OPENPIC'],
> +             if_true: files('openpic_kvm.c'))
>  specific_ss.add(when: 'CONFIG_POWERNV', if_true: files('xics_pnv.c', 'pnv_xive.c'))
>  specific_ss.add(when: 'CONFIG_PPC_UIC', if_true: files('ppc-uic.c'))
>  specific_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_ic.c', 'bcm2836_control.c'))
> @@ -50,8 +51,10 @@ specific_ss.add(when: 'CONFIG_SH4', if_true: files('sh_intc.c'))
>  specific_ss.add(when: 'CONFIG_SIFIVE_CLINT', if_true: files('sifive_clint.c'))
>  specific_ss.add(when: 'CONFIG_SIFIVE_PLIC', if_true: files('sifive_plic.c'))
>  specific_ss.add(when: 'CONFIG_XICS', if_true: files('xics.c'))
> -specific_ss.add(when: 'CONFIG_XICS_KVM', if_true: files('xics_kvm.c'))
> +specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_XICS'],
> +             if_true: files('xics_kvm.c'))
>  specific_ss.add(when: 'CONFIG_XICS_SPAPR', if_true: files('xics_spapr.c'))
>  specific_ss.add(when: 'CONFIG_XIVE', if_true: files('xive.c'))
> -specific_ss.add(when: 'CONFIG_XIVE_KVM', if_true: files('spapr_xive_kvm.c'))
> +specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_XIVE'],
> +             if_true: files('spapr_xive_kvm.c'))
>  specific_ss.add(when: 'CONFIG_XIVE_SPAPR', if_true: files('spapr_xive.c'))
> diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
> index 982d55f5875c..064bd6edd83d 100644
> --- a/hw/ppc/Kconfig
> +++ b/hw/ppc/Kconfig
> @@ -129,21 +129,6 @@ config VIRTEX
>      select XILINX_ETHLITE
>      select FDT_PPC
> 
> -config XIVE
> -    bool
> -    depends on POWERNV || PSERIES
> -
> -config XIVE_SPAPR
> -    bool
> -    default y
> -    depends on PSERIES
> -    select XIVE
> -
> -config XIVE_KVM
> -    bool
> -    default y
> -    depends on XIVE_SPAPR && KVM
> -

Is it possible to split this patch in 2: XICS, XIVE (or 3: same + OPENPIC)?