[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2] target/riscv: Add proper two-stage lookup exception detec
From: |
Alistair Francis |
Subject: |
Re: [PATCH v2] target/riscv: Add proper two-stage lookup exception detection |
Date: |
Mon, 22 Mar 2021 10:30:23 -0400 |
On Fri, Mar 19, 2021 at 10:16 AM Georg Kotheimer
<georg.kotheimer@kernkonzept.com> wrote:
>
> The current two-stage lookup detection in riscv_cpu_do_interrupt falls
> short of its purpose, as all it checks is whether two-stage address
> translation either via the hypervisor-load store instructions or the
> MPRV feature would be allowed.
>
> What we really need instead is whether two-stage address translation was
> active when the exception was raised. However, in riscv_cpu_do_interrupt
> we do not have the information to reliably detect this. Therefore, when
> we raise a memory fault exception we have to record whether two-stage
> address translation is active.
>
> Signed-off-by: Georg Kotheimer <georg.kotheimer@kernkonzept.com>
Thanks!
Applied to riscv-to-apply.next
Alistair
> ---
> Unfortunately, I tested the previous version of the patch only against
> the RISC-V softmmu target, not against the linux-user target.
> I modified the patch, so that the two_stage_lookup is neither present
> nor updated for the linux-user target.
>
> target/riscv/cpu.c | 1 +
> target/riscv/cpu.h | 4 ++++
> target/riscv/cpu_helper.c | 21 ++++++++-------------
> 3 files changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
> index ddea8fbeeb..e8c4455525 100644
> --- a/target/riscv/cpu.c
> +++ b/target/riscv/cpu.c
> @@ -356,6 +356,7 @@ static void riscv_cpu_reset(DeviceState *dev)
> env->mstatus &= ~(MSTATUS_MIE | MSTATUS_MPRV);
> env->mcause = 0;
> env->pc = env->resetvec;
> + env->two_stage_lookup = false;
> #endif
> cs->exception_index = EXCP_NONE;
> env->load_res = -1;
> diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
> index 0edb2826a2..0a33d387ba 100644
> --- a/target/riscv/cpu.h
> +++ b/target/riscv/cpu.h
> @@ -213,6 +213,10 @@ struct CPURISCVState {
> target_ulong satp_hs;
> uint64_t mstatus_hs;
>
> + /* Signals whether the current exception occurred with two-stage address
> + translation active. */
> + bool two_stage_lookup;
> +
> target_ulong scounteren;
> target_ulong mcounteren;
>
> diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
> index 2f43939fb6..af00728829 100644
> --- a/target/riscv/cpu_helper.c
> +++ b/target/riscv/cpu_helper.c
> @@ -605,6 +605,7 @@ static void raise_mmu_exception(CPURISCVState *env,
> target_ulong address,
> g_assert_not_reached();
> }
> env->badaddr = address;
> + env->two_stage_lookup = two_stage;
> }
>
> hwaddr riscv_cpu_get_phys_page_debug(CPUState *cs, vaddr addr)
> @@ -646,6 +647,8 @@ void riscv_cpu_do_transaction_failed(CPUState *cs, hwaddr
> physaddr,
> }
>
> env->badaddr = addr;
> + env->two_stage_lookup = riscv_cpu_virt_enabled(env) ||
> + riscv_cpu_two_stage_lookup(mmu_idx);
> riscv_raise_exception(&cpu->env, cs->exception_index, retaddr);
> }
>
> @@ -669,6 +672,8 @@ void riscv_cpu_do_unaligned_access(CPUState *cs, vaddr
> addr,
> g_assert_not_reached();
> }
> env->badaddr = addr;
> + env->two_stage_lookup = riscv_cpu_virt_enabled(env) ||
> + riscv_cpu_two_stage_lookup(mmu_idx);
> riscv_raise_exception(env, cs->exception_index, retaddr);
> }
> #endif /* !CONFIG_USER_ONLY */
> @@ -910,16 +915,8 @@ void riscv_cpu_do_interrupt(CPUState *cs)
> /* handle the trap in S-mode */
> if (riscv_has_ext(env, RVH)) {
> target_ulong hdeleg = async ? env->hideleg : env->hedeleg;
> - bool two_stage_lookup = false;
>
> - if (env->priv == PRV_M ||
> - (env->priv == PRV_S && !riscv_cpu_virt_enabled(env)) ||
> - (env->priv == PRV_U && !riscv_cpu_virt_enabled(env) &&
> - get_field(env->hstatus, HSTATUS_HU))) {
> - two_stage_lookup = true;
> - }
> -
> - if ((riscv_cpu_virt_enabled(env) || two_stage_lookup) &&
> write_tval) {
> + if (env->two_stage_lookup && write_tval) {
> /*
> * If we are writing a guest virtual address to stval, set
> * this to 1. If we are trapping to VS we will set this to 0
> @@ -957,10 +954,7 @@ void riscv_cpu_do_interrupt(CPUState *cs)
> riscv_cpu_set_force_hs_excep(env, 0);
> } else {
> /* Trap into HS mode */
> - if (!two_stage_lookup) {
> - env->hstatus = set_field(env->hstatus, HSTATUS_SPV,
> - riscv_cpu_virt_enabled(env));
> - }
> + env->hstatus = set_field(env->hstatus, HSTATUS_SPV, false);
> htval = env->guest_phys_fault_addr;
> }
> }
> @@ -1016,6 +1010,7 @@ void riscv_cpu_do_interrupt(CPUState *cs)
> * RISC-V ISA Specification.
> */
>
> + env->two_stage_lookup = false;
> #endif
> cs->exception_index = EXCP_NONE; /* mark handled to qemu */
> }
> --
> 2.31.0
>
>