[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 11/12] macfb: add vertical blank interrupt
From: |
Laurent Vivier |
Subject: |
Re: [PATCH 11/12] macfb: add vertical blank interrupt |
Date: |
Mon, 4 Oct 2021 18:32:42 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.11.0 |
Le 02/10/2021 à 13:00, Mark Cave-Ayland a écrit :
> The MacOS driver expects a 60.15Hz vertical blank interrupt to be generated by
> the framebuffer which in turn schedules the mouse driver via the Vertical
> Retrace
> Manager.
>
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> ---
> hw/display/macfb.c | 81 ++++++++++++++++++++++++++++++++++++++
> include/hw/display/macfb.h | 8 ++++
> 2 files changed, 89 insertions(+)
>
> diff --git a/hw/display/macfb.c b/hw/display/macfb.c
> index 29f6ad8eba..60a203e67b 100644
> --- a/hw/display/macfb.c
> +++ b/hw/display/macfb.c
> @@ -33,9 +33,16 @@
> #define DAFB_MODE_CTRL1 0x8
> #define DAFB_MODE_CTRL2 0xc
> #define DAFB_MODE_SENSE 0x1c
> +#define DAFB_INTR_MASK 0x104
> +#define DAFB_INTR_STAT 0x108
> +#define DAFB_INTR_CLEAR 0x10c
> #define DAFB_RESET 0x200
> #define DAFB_LUT 0x213
>
> +#define DAFB_INTR_VBL 0x4
> +
> +/* Vertical Blank period (60.15Hz) */
> +#define DAFB_INTR_VBL_PERIOD_NS 16625800
>
> /*
> * Quadra sense codes taken from Apple Technical Note HW26:
> @@ -449,6 +456,32 @@ static void macfb_update_display(void *opaque)
> macfb_draw_graphic(s);
> }
>
> +static void macfb_update_irq(MacfbState *s)
> +{
> + uint32_t irq_state = s->irq_state & s->irq_mask;
> +
> + if (irq_state) {
> + qemu_irq_raise(s->irq);
> + } else {
> + qemu_irq_lower(s->irq);
> + }
> +}
> +
> +static void macfb_vbl_timer(void *opaque)
> +{
> + MacfbState *s = opaque;
> + int64_t next_vbl;
> +
> + s->irq_state |= DAFB_INTR_VBL;
> + macfb_update_irq(s);
> +
> + /* 60 Hz irq */
> + next_vbl = (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
> + DAFB_INTR_VBL_PERIOD_NS) /
> + DAFB_INTR_VBL_PERIOD_NS * DAFB_INTR_VBL_PERIOD_NS;
> + timer_mod(s->vbl_timer, next_vbl);
perhaps you can move this to a function and call it here and below?
> +}
> +
> static void macfb_reset(MacfbState *s)
> {
> int i;
> @@ -477,6 +510,9 @@ static uint64_t macfb_ctrl_read(void *opaque,
> case DAFB_MODE_CTRL2:
> val = s->regs[addr >> 2];
> break;
> + case DAFB_INTR_STAT:
> + val = s->irq_state;
> + break;
> case DAFB_MODE_SENSE:
> val = macfb_sense_read(s);
> break;
> @@ -492,6 +528,8 @@ static void macfb_ctrl_write(void *opaque,
> unsigned int size)
> {
> MacfbState *s = opaque;
> + int64_t next_vbl;
> +
> switch (addr) {
> case DAFB_MODE_VADDR1:
> case DAFB_MODE_VADDR2:
> @@ -507,8 +545,25 @@ static void macfb_ctrl_write(void *opaque,
> case DAFB_MODE_SENSE:
> macfb_sense_write(s, val);
> break;
> + case DAFB_INTR_MASK:
> + s->irq_mask = val;
> + if (val & DAFB_INTR_VBL) {
> + next_vbl = (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
> + DAFB_INTR_VBL_PERIOD_NS) /
> + DAFB_INTR_VBL_PERIOD_NS * DAFB_INTR_VBL_PERIOD_NS;
> + timer_mod(s->vbl_timer, next_vbl);
> + } else {
> + timer_del(s->vbl_timer);
> + }
> + break;
> + case DAFB_INTR_CLEAR:
> + s->irq_state &= ~DAFB_INTR_VBL;
> + macfb_update_irq(s);
> + break;
> case DAFB_RESET:
> s->palette_current = 0;
> + s->irq_state &= ~DAFB_INTR_VBL;
> + macfb_update_irq(s);
> break;
> case DAFB_LUT:
> s->color_palette[s->palette_current++] = val;
> @@ -586,6 +641,7 @@ static void macfb_common_realize(DeviceState *dev,
> MacfbState *s, Error **errp)
> s->vram_bit_mask = MACFB_VRAM_SIZE - 1;
> memory_region_set_coalescing(&s->mem_vram);
>
> + s->vbl_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, macfb_vbl_timer, s);
> macfb_update_mode(s);
> }
>
> @@ -601,6 +657,16 @@ static void macfb_sysbus_realize(DeviceState *dev, Error
> **errp)
>
> sysbus_init_mmio(SYS_BUS_DEVICE(s), &ms->mem_ctrl);
> sysbus_init_mmio(SYS_BUS_DEVICE(s), &ms->mem_vram);
> +
> + qdev_init_gpio_out(dev, &ms->irq, 1);
> +}
> +
> +static void macfb_nubus_set_irq(void *opaque, int n, int level)
> +{
> + MacfbNubusState *s = NUBUS_MACFB(opaque);
> + NubusDevice *nd = NUBUS_DEVICE(s);
> +
> + nubus_set_irq(nd, level);
> }
>
> static void macfb_nubus_realize(DeviceState *dev, Error **errp)
> @@ -622,6 +688,19 @@ static void macfb_nubus_realize(DeviceState *dev, Error
> **errp)
>
> memory_region_add_subregion(&nd->slot_mem, DAFB_BASE, &ms->mem_ctrl);
> memory_region_add_subregion(&nd->slot_mem, VIDEO_BASE, &ms->mem_vram);
> +
> + ms->irq = qemu_allocate_irq(macfb_nubus_set_irq, s, 0);
> +}
> +
> +static void macfb_nubus_unrealize(DeviceState *dev)
> +{
> + MacfbNubusState *s = NUBUS_MACFB(dev);
> + MacfbNubusDeviceClass *ndc = NUBUS_MACFB_GET_CLASS(dev);
> + MacfbState *ms = &s->macfb;
> +
> + ndc->parent_unrealize(dev);
> +
> + qemu_free_irq(ms->irq);
> }
>
> static void macfb_sysbus_reset(DeviceState *d)
> @@ -672,6 +751,8 @@ static void macfb_nubus_class_init(ObjectClass *klass,
> void *data)
>
> device_class_set_parent_realize(dc, macfb_nubus_realize,
> &ndc->parent_realize);
> + device_class_set_parent_unrealize(dc, macfb_nubus_unrealize,
> + &ndc->parent_unrealize);
> dc->desc = "Nubus Macintosh framebuffer";
> dc->reset = macfb_nubus_reset;
> dc->vmsd = &vmstate_macfb;
> diff --git a/include/hw/display/macfb.h b/include/hw/display/macfb.h
> index 0aff0d84d2..e52775aa21 100644
> --- a/include/hw/display/macfb.h
> +++ b/include/hw/display/macfb.h
> @@ -14,7 +14,9 @@
> #define MACFB_H
>
> #include "exec/memory.h"
> +#include "hw/irq.h"
> #include "ui/console.h"
> +#include "qemu/timer.h"
> #include "qom/object.h"
>
> typedef enum {
> @@ -63,6 +65,11 @@ typedef struct MacfbState {
>
> uint32_t regs[MACFB_NUM_REGS];
> MacFbMode *mode;
> +
> + uint32_t irq_state;
> + uint32_t irq_mask;
> + QEMUTimer *vbl_timer;
> + qemu_irq irq;
> } MacfbState;
>
> #define TYPE_MACFB "sysbus-macfb"
> @@ -81,6 +88,7 @@ struct MacfbNubusDeviceClass {
> DeviceClass parent_class;
>
> DeviceRealize parent_realize;
> + DeviceUnrealize parent_unrealize;
> };
>
>
>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
- Re: [PATCH 06/12] macfb: implement mode sense to allow display type to be detected, (continued)
- [PATCH 05/12] macfb: add trace events for reading and writing the control registers, Mark Cave-Ayland, 2021/10/02
- [PATCH 12/12] q800: wire macfb IRQ to separate video interrupt on VIA2, Mark Cave-Ayland, 2021/10/02
- [PATCH 09/12] macfb: fix up 1-bit pixel encoding, Mark Cave-Ayland, 2021/10/02
- [PATCH 11/12] macfb: add vertical blank interrupt, Mark Cave-Ayland, 2021/10/02
- Re: [PATCH 11/12] macfb: add vertical blank interrupt,
Laurent Vivier <=
- [PATCH 10/12] macfb: fix 24-bit RGB pixel encoding, Mark Cave-Ayland, 2021/10/02