qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v3] failover: fix unplug pending detection


From: Michael S. Tsirkin
Subject: Re: [PATCH v3] failover: fix unplug pending detection
Date: Tue, 5 Oct 2021 11:14:37 -0400

On Fri, Oct 01, 2021 at 10:25:02AM +0200, Laurent Vivier wrote:
> Failover needs to detect the end of the PCI unplug to start migration
> after the VFIO card has been unplugged.
> 
> To do that, a flag is set in pcie_cap_slot_unplug_request_cb() and reset in
> pcie_unplug_device().
> 
> But since
>     17858a169508 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35")
> we have switched to ACPI unplug and these functions are not called anymore
> and the flag not set. So failover migration is not able to detect if card
> is really unplugged and acts as it's done as soon as it's started. So it
> doesn't wait the end of the unplug to start the migration. We don't see any
> problem when we test that because ACPI unplug is faster than PCIe native
> hotplug and when the migration really starts the unplug operation is
> already done.
> 
> See c000a9bd06ea ("pci: mark device having guest unplug request pending")
>     a99c4da9fc2a ("pci: mark devices partially unplugged")
> 
> Signed-off-by: Laurent Vivier <lvivier@redhat.com>
> Reviewed-by: Ani Sinha <ani@anisinha.ca>

Laurent, are you thinking of addressing Gerd's comment?

> ---
> 
> Notes:
>     v3: add some inlined comments to explain partially_hotplugged and
>         pending_deleted_event
>     v2: move partially_hotplugged to acpi_pcihp_eject_slot()
> 
>  hw/acpi/pcihp.c | 30 +++++++++++++++++++++++++++---
>  1 file changed, 27 insertions(+), 3 deletions(-)
> 
> diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c
> index f610a25d2ef9..30405b5113d7 100644
> --- a/hw/acpi/pcihp.c
> +++ b/hw/acpi/pcihp.c
> @@ -222,9 +222,27 @@ static void acpi_pcihp_eject_slot(AcpiPciHpState *s, 
> unsigned bsel, unsigned slo
>          PCIDevice *dev = PCI_DEVICE(qdev);
>          if (PCI_SLOT(dev->devfn) == slot) {
>              if (!acpi_pcihp_pc_no_hotplug(s, dev)) {
> -                hotplug_ctrl = qdev_get_hotplug_handler(qdev);
> -                hotplug_handler_unplug(hotplug_ctrl, qdev, &error_abort);
> -                object_unparent(OBJECT(qdev));
> +                /*
> +                 * partially_hotplugged is used by virtio-net failover:
> +                 * failover has asked the guest OS to unplug the device
> +                 * but we need to keep some references to the device
> +                 * to be able to plug it back in case of failure so
> +                 * we don't execute hotplug_handler_unplug().
> +                 */
> +                if (dev->partially_hotplugged) {
> +                    /*
> +                     * pending_deleted_event is set to true when
> +                     * virtio-net failover asks to unplug the device,
> +                     * and set to false here when the operation is done
> +                     * This is used by the migration loop to detect the
> +                     * end of the operation and really start the migration.
> +                     */
> +                    qdev->pending_deleted_event = false;
> +                } else {
> +                    hotplug_ctrl = qdev_get_hotplug_handler(qdev);
> +                    hotplug_handler_unplug(hotplug_ctrl, qdev, &error_abort);
> +                    object_unparent(OBJECT(qdev));
> +                }
>              }
>          }
>      }
> @@ -396,6 +414,12 @@ void acpi_pcihp_device_unplug_request_cb(HotplugHandler 
> *hotplug_dev,
>          return;
>      }
>  
> +    /*
> +     * pending_deleted_event is used by virtio-net failover to detect the
> +     * end of the unplug operation, the flag is set to false in
> +     * acpi_pcihp_eject_slot() when the operation is completed.
> +     */
> +    pdev->qdev.pending_deleted_event = true;
>      s->acpi_pcihp_pci_status[bsel].down |= (1U << slot);
>      acpi_send_event(DEVICE(hotplug_dev), ACPI_PCI_HOTPLUG_STATUS);
>  }
> -- 
> 2.31.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]