Re: [PATCH v2 1/1] virtio: write back F_VERSION_1 before validate

[Cornelia Huck]

On Fri, Oct 08 2021, Halil Pasic <pasic@linux.ibm.com> wrote:

> On Fri, 8 Oct 2021 09:05:03 -0400
> "Michael S. Tsirkin" <mst@redhat.com> wrote:
>
>> On Fri, Oct 08, 2021 at 02:34:22PM +0200, Halil Pasic wrote:
>> > The virtio specification virtio-v1.1-cs01 states: "Transitional devices
>> > MUST detect Legacy drivers by detecting that VIRTIO_F_VERSION_1 has not
>> > been acknowledged by the driver."  This is exactly what QEMU as of 6.1
>> > has done relying solely on VIRTIO_F_VERSION_1 for detecting that.
>> > 
>> > However, the specification also says: "... the driver MAY read (but MUST
>> > NOT write) the device-specific configuration fields to check that it can
>> > support the device ..." before setting FEATURES_OK.
>> > 
>> > In that case, any transitional device relying solely on
>> > VIRTIO_F_VERSION_1 for detecting legacy drivers will return data in
>> > legacy format.  In particular, this implies that it is in big endian
>> > format for big endian guests. This naturally confuses the driver which
>> > expects little endian in the modern mode.
>> > 
>> > It is probably a good idea to amend the spec to clarify that
>> > VIRTIO_F_VERSION_1 can only be relied on after the feature negotiation
>> > is complete. However, we already have a regression so let's try to address 
>> >  
>> 
>> actually, regressions. and we can add 
>> "since originally before validate callback existed
>> config space was only read after
>> FEATURES_OK. See Fixes tags for relevant commits"
>> 
>> > it.
>
> How about replacing the paragraph above with the following?
>
> "It is probably a good idea to amend the spec to clarify that
> VIRTIO_F_VERSION_1 can only be relied on after the feature negotiation
> is complete. Before validate callback existed, config space was only
> read after FEATURES_OK. However, we already have two regression, so
> let's address this here as well."
>> > 
>> > The regressions affect the VIRTIO_NET_F_MTU feature of virtio-net and
>> > the VIRTIO_BLK_F_BLK_SIZE feature of virtio-blk for BE guests when
>> > virtio 1.0 is used on both sides. The latter renders virtio-blk
>> > unusable with DASD backing, because things simply don't work with
>> > the default.  
>
> and add 
> "See Fixes tags for relevant commits."
> here.
>> 
>> Let's add a work around description now:
>> 
>> 
>> For QEMU, we can work around the issue by writing out the features
>> register with VIRTIO_F_VERSION_1 bit set.  We (ab) use the
> s/features register/feature bits/
> rationale: ccw does not have a features register, and qemu does not
> really act as if its behavior was controlled by the values in a features
> register. I.e. when we read the register we see VIRTIO_F_VERSION_!
> because the feature is offered. In QEMU we basically read host_featues
> but write the guest_features. And what drives device behavior is mostly
> guest_features. 
>
> s/(ab) use/(ab)use/
>
>> finalize_features config op for this. It's not enough to address vhost
>
> s/It's/This is/
>
>> user and vhost block devices since these do not get the features until
>
> s/vhost user and vhost block/some vhost-user and vhost-vdpa/ ?
>
> Ratioale: I think vhost block is just a vhost-user device. On the other
> hand vhost-user-fs works like charm because the config space is
> implemented in qemu and not in the vhost-user device. I
> didn't check vhost_net. I'm not even sure qemu offers a vhost_net
> implementation. Anyway I wouldn't like to make any false statements here.
>
>> FEATURES_OK, however it looks like these two actually never handled the
>> endian-ness for legacy mode correctly, so at least that's not a
>> regression.
>> 
>> No devices except virtio net and virtio blk seem to be affected.
>> 
>> Long term the right thing to do is to fix the hypervisors.
>> 
>
> Sounds good. Thanks! Are you OK with my changes proposed to your changes?
>
> Regards,
> Halil
>> 
>> > 
>> > Cc: <stable@vger.kernel.org> #v4.11
>> > Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
>> > Fixes: 82e89ea077b9 ("virtio-blk: Add validation for block size in
>> > config space") Fixes: fe36cbe0671e ("virtio_net: clear MTU when out
>> > of range") Reported-by: markver@us.ibm.com
>> > ---
>> >  drivers/virtio/virtio.c | 11 +++++++++++
>> >  1 file changed, 11 insertions(+)
>> > 
>> > diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
>> > index 0a5b54034d4b..236081afe9a2 100644
>> > --- a/drivers/virtio/virtio.c
>> > +++ b/drivers/virtio/virtio.c
>> > @@ -239,6 +239,17 @@ static int virtio_dev_probe(struct device *_d)
>> >            driver_features_legacy = driver_features;
>> >    }
>> >  
>> > +  /*
>> > +   * Some devices detect legacy solely via F_VERSION_1. Write
>> > +   * F_VERSION_1 to force LE config space accesses before
>> > FEATURES_OK for
>> > +   * these when needed.
>> > +   */
>> > +  if (drv->validate && !virtio_legacy_is_little_endian()
>> > +                    && device_features &
>> > BIT_ULL(VIRTIO_F_VERSION_1)) {
>> > +          dev->features = BIT_ULL(VIRTIO_F_VERSION_1);
>> > +          dev->config->finalize_features(dev);
>> > +  }
>> > +
>> >    if (device_features & (1ULL << VIRTIO_F_VERSION_1))
>> >            dev->features = driver_features & device_features;
>> >    else
>> > 
>> > base-commit: 60a9483534ed0d99090a2ee1d4bb0b8179195f51

FWIW, with the amends:

Reviewed-by: Cornelia Huck <cohuck@redhat.com>