Re: Host-PCI-Device mapping

[Ajay Garg]

Never mind, found the answers in kvm_set_user_memory :)

On Fri, Oct 15, 2021 at 9:36 PM Ajay Garg <ajaygargnsit@gmail.com> wrote:
>
> Hello everyone.
>
> I have a x86_64 L1 guest, running on a x86_64 host, with a
> host-pci-device attached to the guest.
> The host runs with IOMMU enabled, and passthrough enabled.
>
> Following are the addresses of the bar0-region of the pci-device, as
> per the output of lspci -v :
>
> * On host (hpa) => e2c20000
> * On guest (gpa) => fc078000
>
>
> Now, if /proc/<qemu-pid>/maps is dumped on the host, following line of
> interest is seen :
>
> #############################################################################
> 7f0b5c5f4000-7f0b5c5f5000 rw-s e2c20000 00:0e 13653
>   anon_inode:[vfio-device]
> #############################################################################
>
> Above indicates that the hva for the pci-device starts from 0x7f0b5c5f4000.
>
>
> Also, upon attaching gdb to the qemu process, and using a slightly
> modified qemugdb/mtree.py (that prints only the information for
> 0000:0a:00.0 name) to dump the memory-regions, following is obtained :
>
> #############################################################################
> (gdb) source qemu-gdb.py
> (gdb) qemu mtree
>     00000000fc078000-00000000fc07c095 0000:0a:00.0 base BAR 0 (I/O) (@
> 0x56540d8c8da0)
>       00000000fc078000-00000000fc07c095 0000:0a:00.0 BAR 0 (I/O) (@
> 0x56540d8c76b0)
>         00000000fc078000-00000000fc07c095 0000:0a:00.0 BAR 0 mmaps[0]
> (I/O) (@ 0x56540d8c7c30)
> (gdb)
> #############################################################################
>
> Above indicates that the hva for the pci-device starts from 0x56540d8c7c30.
>
> As seen, there is a discrepancy in the two results.
>
>
> What am I missing?
> Looking for pointers, will be grateful.
>
>
> Thanks and Regards,
> Ajay