Re: [PATCH v2 6/8] q800: route SONIC on-board Ethernet IRQ via nubus IRQ 9 in classic mode

[Laurent Vivier]

Le 20/10/2021 à 15:41, Mark Cave-Ayland a écrit :
> When the hardware is operating in classic mode the SONIC on-board Ethernet IRQ 
> is
> routed to nubus IRQ 9 instead of directly to the CPU at level 3. This does not
> affect the framebuffer which although it exists in slot 9, has its own
> dedicated IRQ on the Quadra 800 hardware.
>
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> ---
>   hw/m68k/q800.c | 57 ++++++++++++++++++++++++++++++++++++--------------
>   1 file changed, 41 insertions(+), 16 deletions(-)
>
> diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
> index 0093872d89..7a8de089f4 100644
> --- a/hw/m68k/q800.c
> +++ b/hw/m68k/q800.c
> @@ -101,6 +101,7 @@ struct GLUEState {
>       M68kCPU *cpu;
>       uint8_t ipr;
>       uint8_t auxmode;
> +    qemu_irq irqs[1];
>   };
>   
>   #define GLUE_IRQ_IN_VIA1       0
> @@ -108,27 +109,40 @@ struct GLUEState {
>   #define GLUE_IRQ_IN_SONIC      2
>   #define GLUE_IRQ_IN_ESCC       3
>   
> +#define GLUE_IRQ_NUBUS_9       0
> +
>   static void GLUE_set_irq(void *opaque, int irq, int level)
>   {
>       GLUEState *s = opaque;
>       int i;
>   
> -    switch (irq) {
> -    case GLUE_IRQ_IN_VIA1:
> -        irq = 5;
> -        break;
> -
> -    case GLUE_IRQ_IN_VIA2:
> -        irq = 1;
> -        break;
> -
> -    case GLUE_IRQ_IN_SONIC:
> -        irq = 2;
> -        break;
> -
> -    case GLUE_IRQ_IN_ESCC:
> -        irq = 3;
> -        break;
> +    if (s->auxmode) {
> +        /* Classic mode */
> +        switch (irq) {
> +        case GLUE_IRQ_IN_SONIC:
> +            /* Route to VIA2 instead */
> +            qemu_set_irq(s->irqs[GLUE_IRQ_NUBUS_9], level);
> +            return;
> +        }
> +    } else {
> +        /* A/UX mode */
> +        switch (irq) {
> +        case GLUE_IRQ_IN_VIA1:
> +            irq = 5;
> +            break;
> +
> +        case GLUE_IRQ_IN_VIA2:
> +            irq = 1;
> +            break;
> +
> +        case GLUE_IRQ_IN_SONIC:
> +            irq = 2;
> +            break;
> +
> +        case GLUE_IRQ_IN_ESCC:
> +            irq = 3;
> +            break;
> +        }
>       }
>   
>       if (level) {
> @@ -186,9 +200,12 @@ static Property glue_properties[] = {
>   static void glue_init(Object *obj)
>   {
>       DeviceState *dev = DEVICE(obj);
> +    GLUEState *s = GLUE(dev);
>   
>       qdev_init_gpio_in(dev, GLUE_set_irq, 8);
>       qdev_init_gpio_in_named(dev, glue_auxmode_set_irq, "auxmode", 1);
> +
> +    qdev_init_gpio_out(dev, s->irqs, 1);
>   }
>   
>   static void glue_class_init(ObjectClass *klass, void *data)
> @@ -454,6 +471,14 @@ static void q800_init(MachineState *machine)
>                                                        VIA2_NUBUS_IRQ_9 + i));
>       }
>   
> +    /*
> +     * Since the framebuffer in slot 0x9 uses a separate IRQ, wire the unused
> +     * IRQ via GLUE for use by SONIC Ethernet in classic mode
> +     */
> +    qdev_connect_gpio_out(glue, GLUE_IRQ_NUBUS_9,
> +                          qdev_get_gpio_in_named(via2_dev, "nubus-irq",
> +                                                 VIA2_NUBUS_IRQ_9));
> +
>       nubus = &NUBUS_BRIDGE(dev)->bus;
>   
>       /* framebuffer in nubus slot #9 */

Reviewed-by: Laurent Vivier <laurent@vivier.eu>