[PATCH 27/42] hw/isa/piix4: Allow board to provide PCI interrupt routes

[Bernhard Beschow]

PIIX3 initializes the PIRQx route control registers to the default
values as described in the 82371AB PCI-TO-ISA/IDE XCELERATOR (PIIX4)
April 1997 manual. PIIX4, however, initializes the routes according to
the Malta™ User’s Manual, ch 6.6, which are IRQs 10 and 11. In order to
allow the reset methods to be consolidated, allow board code to specify
the routes.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
---
 hw/isa/piix4.c  | 14 ++++++++++----
 hw/mips/malta.c |  4 ++++
 2 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/hw/isa/piix4.c b/hw/isa/piix4.c
index ed9eca715f..763c98b565 100644
--- a/hw/isa/piix4.c
+++ b/hw/isa/piix4.c
@@ -57,6 +57,8 @@ struct PIIX4State {
     MemoryRegion rcr_mem;
     uint8_t rcr;
 
+    uint8_t pci_irq_reset_mappings[PIIX_NUM_PIRQS];
+
     bool has_acpi;
     bool has_usb;
     bool smm_enabled;
@@ -122,10 +124,10 @@ static void piix4_isa_reset(DeviceState *dev)
     pci_conf[0x4c] = 0x4d;
     pci_conf[0x4e] = 0x03;
     pci_conf[0x4f] = 0x00;
-    pci_conf[0x60] = 0x0a; // PCI A -> IRQ 10
-    pci_conf[0x61] = 0x0a; // PCI B -> IRQ 10
-    pci_conf[0x62] = 0x0b; // PCI C -> IRQ 11
-    pci_conf[0x63] = 0x0b; // PCI D -> IRQ 11
+    pci_conf[PIIX_PIRQCA] = d->pci_irq_reset_mappings[0];
+    pci_conf[PIIX_PIRQCB] = d->pci_irq_reset_mappings[1];
+    pci_conf[PIIX_PIRQCC] = d->pci_irq_reset_mappings[2];
+    pci_conf[PIIX_PIRQCD] = d->pci_irq_reset_mappings[3];
     pci_conf[0x69] = 0x02;
     pci_conf[0x70] = 0x80;
     pci_conf[0x76] = 0x0c;
@@ -299,6 +301,10 @@ static void piix4_init(Object *obj)
 
 static Property piix4_props[] = {
     DEFINE_PROP_UINT32("smb_io_base", PIIX4State, smb_io_base, 0),
+    DEFINE_PROP_UINT8("pirqa", PIIX4State, pci_irq_reset_mappings[0], 0x80),
+    DEFINE_PROP_UINT8("pirqb", PIIX4State, pci_irq_reset_mappings[1], 0x80),
+    DEFINE_PROP_UINT8("pirqc", PIIX4State, pci_irq_reset_mappings[2], 0x80),
+    DEFINE_PROP_UINT8("pirqd", PIIX4State, pci_irq_reset_mappings[3], 0x80),
     DEFINE_PROP_BOOL("has-acpi", PIIX4State, has_acpi, true),
     DEFINE_PROP_BOOL("has-usb", PIIX4State, has_usb, true),
     DEFINE_PROP_BOOL("smm-enabled", PIIX4State, smm_enabled, false),
diff --git a/hw/mips/malta.c b/hw/mips/malta.c
index 6339b0d66c..44b6b14f3d 100644
--- a/hw/mips/malta.c
+++ b/hw/mips/malta.c
@@ -1403,6 +1403,10 @@ void mips_malta_init(MachineState *machine)
     piix4 = pci_new_multifunction(PCI_DEVFN(10, 0), true,
                                   TYPE_PIIX4_PCI_DEVICE);
     qdev_prop_set_uint32(DEVICE(piix4), "smb_io_base", 0x1100);
+    qdev_prop_set_uint8(DEVICE(piix4), "pirqa", 10);
+    qdev_prop_set_uint8(DEVICE(piix4), "pirqb", 10);
+    qdev_prop_set_uint8(DEVICE(piix4), "pirqc", 11);
+    qdev_prop_set_uint8(DEVICE(piix4), "pirqd", 11);
     pci_realize_and_unref(piix4, pci_bus, &error_fatal);
     isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(piix4), "isa.0"));
 
-- 
2.37.3