[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [RFC PATCH v3 04/10] hw/arm/smmuv3: Add page table walk for stage-2
From: |
Eric Auger |
Subject: |
Re: [RFC PATCH v3 04/10] hw/arm/smmuv3: Add page table walk for stage-2 |
Date: |
Mon, 15 May 2023 10:37:13 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101 Thunderbird/102.5.0 |
Hi Mostafa,
On 4/1/23 12:49, Mostafa Saleh wrote:
> In preparation for adding stage-2 support, add Stage-2 PTW code.
> Only Aarch64 format is supported as stage-1.
>
> Nesting stage-1 and stage-2 is not supported right now.
>
> HTTU is not supported, SW is expected to maintain the Access flag.
> This is described in the SMMUv3 manual(IHI 0070.E)
nit the exact version might be E.a.
> "5.2. Stream Table Entry" in "[181] S2AFFD".
> This flag determines the behavior on access of a stage-2 page whose
> descriptor has AF == 0:
> - 0b0: An Access flag fault occurs (stall not supported).
> - 0b1: An Access flag fault never occurs.
> An Access fault takes priority over a Permission fault.
>
> There are 3 address size checks for stage-2 according to "IHI 0070.E"
> in "3.4. Address sizes".
> - As nesting is not supported, input address is passed directly to
> stage-2, and is checked against IAS.
> We use cfg->oas to hold the OAS when stage-1 is not used, this is set
> in the next patch.
> This check is done outside of smmu_ptw_64_s2 as it is not part of
> stage-2(it throws stage-1 fault), and the stage-2 function shouldn't
> change it's behavior when nesting is supported.
> When nesting is supported and we figure out how to combine TLB for
> stage-1 and stage-2 we can move this check into the stage-1 function
> as described in ARM DDI0487I.a in pseudocode
> aarch64/translation/vmsa_translation/AArch64.S1Translate
> aarch64/translation/vmsa_translation/AArch64.S1DisabledOutput
>
> - Input to stage-2 is checked against s2t0sz, and throws stage-2
> transaltion fault if exceeds it.
>
> - Output of stage-2 is checked against effective PA output range.
>
> Signed-off-by: Mostafa Saleh <smostafa@google.com>
> ---
> Changes in v3:
> - Fix IPA address size check.
> - s2cfg.oas renamed to s2cfg.eff_ps.
> - s/iova/ipa
> - s/ap/s2ap
> - s/gran/granule_sz
> - use level_shift instead of inline code.
> - Add missing brackets in is_permission_fault_s2.
> - Use new VMSA_* macros and functions instead of SMMU_*
> - Rename pgd_idx to pgd_concat_idx.
> - Move SMMU_MAX_S2_CONCAT to STE patch as it is not used here.
> Changes in v2:
> - Squash S2AFF PTW code.
> - Use common functions between stage-1 and stage-2.
> - Add checks for IPA and out PA.
> ---
> hw/arm/smmu-common.c | 142 ++++++++++++++++++++++++++++++++++++++++-
> hw/arm/smmu-internal.h | 35 ++++++++++
> 2 files changed, 176 insertions(+), 1 deletion(-)
>
> diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c
> index 50391a8c94..a4ebd004c5 100644
> --- a/hw/arm/smmu-common.c
> +++ b/hw/arm/smmu-common.c
> @@ -363,6 +363,127 @@ error:
> return -EINVAL;
> }
>
> +/**
> + * smmu_ptw_64_s2 - VMSAv8-64 Walk of the page tables for a given ipa
> + * for stage-2.
> + * @cfg: translation config
> + * @ipa: ipa to translate
> + * @perm: access type
> + * @tlbe: SMMUTLBEntry (out)
> + * @info: handle to an error info
> + *
> + * Return 0 on success, < 0 on error. In case of error, @info is filled
> + * and tlbe->perm is set to IOMMU_NONE.
> + * Upon success, @tlbe is filled with translated_addr and entry
> + * permission rights.
> + */
> +static int smmu_ptw_64_s2(SMMUTransCfg *cfg,
> + dma_addr_t ipa, IOMMUAccessFlags perm,
> + SMMUTLBEntry *tlbe, SMMUPTWEventInfo *info)
> +{
> + const int stage = 2;
> + int granule_sz = cfg->s2cfg.granule_sz;
> + /* ARM DDI0487I.a: Table D8-7. */
> + int inputsize = 64 - cfg->s2cfg.tsz;
> + int level = get_start_level(cfg->s2cfg.sl0, granule_sz);
> + int stride = VMSA_STRIDE(granule_sz);
> + int idx = pgd_concat_idx(level, granule_sz, ipa);
> + /*
> + * Get the ttb from concatenated structure.
> + * The offset is the idx * size of each ttb(number of ptes *
> (sizeof(pte))
> + */
> + uint64_t baseaddr = extract64(cfg->s2cfg.vttb, 0, 48) + (1 << stride) *
> + idx * sizeof(uint64_t);
> + dma_addr_t indexmask = VMSA_IDXMSK(inputsize, stride, level);
> +
> + baseaddr &= ~indexmask;
> +
> + /*
> + * On input, a stage 2 Translation fault occurs if the IPA is outside the
> + * range configured by the relevant S2T0SZ field of the STE.
> + */
> + if (ipa >= (1ULL << inputsize)) {
> + info->type = SMMU_PTW_ERR_TRANSLATION;
> + goto error;
> + }
> +
> + while (level < VMSA_LEVELS) {
> + uint64_t subpage_size = 1ULL << level_shift(level, granule_sz);
> + uint64_t mask = subpage_size - 1;
> + uint32_t offset = iova_level_offset(ipa, inputsize, level,
> granule_sz);
> + uint64_t pte, gpa;
> + dma_addr_t pte_addr = baseaddr + offset * sizeof(pte);
> + uint8_t s2ap;
> +
> + if (get_pte(baseaddr, offset, &pte, info)) {
> + goto error;
> + }
> + trace_smmu_ptw_level(stage, level, ipa, subpage_size,
> + baseaddr, offset, pte);
> + if (is_invalid_pte(pte) || is_reserved_pte(pte, level)) {
> + trace_smmu_ptw_invalid_pte(stage, level, baseaddr,
> + pte_addr, offset, pte);
> + break;
> + }
> +
> + if (is_table_pte(pte, level)) {
> + baseaddr = get_table_pte_address(pte, granule_sz);
> + level++;
> + continue;
> + } else if (is_page_pte(pte, level)) {
> + gpa = get_page_pte_address(pte, granule_sz);
> + trace_smmu_ptw_page_pte(stage, level, ipa,
> + baseaddr, pte_addr, pte, gpa);
> + } else {
> + uint64_t block_size;
> +
> + gpa = get_block_pte_address(pte, level, granule_sz,
> + &block_size);
> + trace_smmu_ptw_block_pte(stage, level, baseaddr,
> + pte_addr, pte, ipa, gpa,
> + block_size >> 20);
> + }
> +
> + /*
> + * If S2AFFD and PTE.AF are 0 => fault. (5.2. Stream Table Entry)
> + * An Access fault takes priority over a Permission fault.
> + */
> + if (!PTE_AF(pte) && !cfg->s2cfg.affd) {
> + info->type = SMMU_PTW_ERR_ACCESS;
> + goto error;
> + }
> +
> + s2ap = PTE_AP(pte);
> + if (is_permission_fault_s2(s2ap, perm)) {
> + info->type = SMMU_PTW_ERR_PERMISSION;
> + goto error;
> + }
> +
> + /*
> + * The address output from the translation causes a stage 2 Address
> + * Size fault if it exceeds the effective PA output range.
> + */
> + if (gpa >= (1ULL << cfg->s2cfg.eff_ps)) {
> + info->type = SMMU_PTW_ERR_ADDR_SIZE;
> + goto error;
> + }
> +
> + tlbe->entry.translated_addr = gpa;
> + tlbe->entry.iova = ipa & ~mask;
> + tlbe->entry.addr_mask = mask;
> + tlbe->entry.perm = s2ap;
> + tlbe->level = level;
> + tlbe->granule = granule_sz;
> + return 0;
> + }
> + info->type = SMMU_PTW_ERR_TRANSLATION;
> +
> +error:
> + info->stage = 2;
> + tlbe->entry.perm = IOMMU_NONE;
> + return -EINVAL;
> +}
> +
> /**
> * smmu_ptw - Walk the page tables for an IOVA, according to @cfg
> *
> @@ -377,7 +498,26 @@ error:
> int smmu_ptw(SMMUTransCfg *cfg, dma_addr_t iova, IOMMUAccessFlags perm,
> SMMUTLBEntry *tlbe, SMMUPTWEventInfo *info)
> {
> - return smmu_ptw_64_s1(cfg, iova, perm, tlbe, info);
> + if (cfg->stage == 1) {
> + return smmu_ptw_64_s1(cfg, iova, perm, tlbe, info);
> + } else if (cfg->stage == 2) {
> + /*
> + * If bypassing stage 1(or unimplemented), the input address is
> passed
> + * directly to stage 2 as IPA. If the input address of a transaction
> + * exceeds the size of the IAS, a stage 1 Address Size fault occurs.
> + * For AA64, IAS = OAS according to (IHI 0070.E) "3.4 Address sizes"
> + */
> + if (iova >= (1ULL << cfg->oas)) {
> + info->type = SMMU_PTW_ERR_ADDR_SIZE;
> + info->stage = 1;
> + tlbe->entry.perm = IOMMU_NONE;
> + return -EINVAL;
> + }
> +
> + return smmu_ptw_64_s2(cfg, iova, perm, tlbe, info);
> + }
> +
> + g_assert_not_reached();
> }
>
> /**
> diff --git a/hw/arm/smmu-internal.h b/hw/arm/smmu-internal.h
> index 2d75b31953..a9454f914e 100644
> --- a/hw/arm/smmu-internal.h
> +++ b/hw/arm/smmu-internal.h
> @@ -66,6 +66,8 @@
> #define PTE_APTABLE(pte) \
> (extract64(pte, 61, 2))
>
> +#define PTE_AF(pte) \
> + (extract64(pte, 10, 1))
> /*
> * TODO: At the moment all transactions are considered as privileged (EL1)
> * as IOMMU translation callback does not pass user/priv attributes.
> @@ -73,6 +75,9 @@
> #define is_permission_fault(ap, perm) \
> (((perm) & IOMMU_WO) && ((ap) & 0x2))
>
> +#define is_permission_fault_s2(s2ap, perm) \
> + (!(((s2ap) & (perm)) == (perm)))
> +
> #define PTE_AP_TO_PERM(ap) \
> (IOMMU_ACCESS_FLAG(true, !((ap) & 0x2)))
>
> @@ -96,6 +101,36 @@ uint64_t iova_level_offset(uint64_t iova, int inputsize,
> MAKE_64BIT_MASK(0, gsz - 3);
> }
>
> +/* FEAT_LPA2 and FEAT_TTST are not implemented. */
> +static inline int get_start_level(int sl0 , int granule_sz)
> +{
> + /* ARM DDI0487I.a: Table D8-12. */
> + if (granule_sz == 12) {
> + return 2 - sl0;
> + }
> + /* ARM DDI0487I.a: Table D8-22 and Table D8-31. */
> + return 3 - sl0;
> +}
> +
> +/*
> + * Index in a concatenated first level stage-2 page table.
> + * ARM DDI0487I.a: D8.2.2 Concatenated translation tables.
> + */
> +static inline int pgd_concat_idx(int start_level, int granule_sz,
> + dma_addr_t ipa)
> +{
> + uint64_t ret;
> + /*
> + * Get the number of bits handled by next levels, then any extra bits in
> + * the address should index the concatenated tables. This relation can be
> + * deduced from tables in ARM DDI0487I.a: D8.2.7-9
> + */
> + int shift = level_shift(start_level - 1, granule_sz);
> +
> + ret = ipa >> shift;
> + return ret;
> +}
> +
> #define SMMU_IOTLB_ASID(key) ((key).asid)
>
> typedef struct SMMUIOTLBPageInvInfo {
Besides
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Thanks
Eric
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [RFC PATCH v3 04/10] hw/arm/smmuv3: Add page table walk for stage-2,
Eric Auger <=