qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[RFC PATCH v2 1/2] hw/riscv: hart: replace array access with qemu_get_cp


From: Nikita Shubin
Subject: [RFC PATCH v2 1/2] hw/riscv: hart: replace array access with qemu_get_cpu()
Date: Thu, 14 Sep 2023 11:07:39 +0300

From: Nikita Shubin <n.shubin@yadro.com>

Replace all RISCVHartArrayState->harts[idx] with
qemu_get_cpu()/cpu_by_arch_id().

cpu_index is guaranteed to be continuus by cpu_get_free_index(), so they
can be accessed in same order they were added.

"Hart IDs might not necessarily be numbered contiguously in a
multiprocessor system, but at least one hart must have
a hart ID of zero."

This states that hart ID zero should always be present, this makes using
cpu_by_arch_id(0) safe.

Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
---
 hw/riscv/boot.c            |  6 ++++--
 hw/riscv/sifive_u.c        |  7 +++++--
 hw/riscv/spike.c           | 17 ++++++++++-------
 hw/riscv/virt-acpi-build.c |  2 +-
 hw/riscv/virt.c            | 17 +++++++++--------
 5 files changed, 29 insertions(+), 20 deletions(-)

diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c
index 52bf8e67de..041f966e58 100644
--- a/hw/riscv/boot.c
+++ b/hw/riscv/boot.c
@@ -36,7 +36,8 @@
 
 bool riscv_is_32bit(RISCVHartArrayState *harts)
 {
-    return harts->harts[0].env.misa_mxl_max == MXL_RV32;
+    RISCVCPU *hart = RISCV_CPU(cpu_by_arch_id(0));
+    return hart->env.misa_mxl_max == MXL_RV32;
 }
 
 /*
@@ -385,6 +386,7 @@ void riscv_setup_rom_reset_vec(MachineState *machine, 
RISCVHartArrayState *harts
                                uint64_t fdt_load_addr)
 {
     int i;
+    RISCVCPU *hart = RISCV_CPU(cpu_by_arch_id(0));
     uint32_t start_addr_hi32 = 0x00000000;
     uint32_t fdt_load_addr_hi32 = 0x00000000;
 
@@ -414,7 +416,7 @@ void riscv_setup_rom_reset_vec(MachineState *machine, 
RISCVHartArrayState *harts
         reset_vec[4] = 0x0182b283;   /*     ld     t0, 24(t0) */
     }
 
-    if (!harts->harts[0].cfg.ext_icsr) {
+    if (!hart->cfg.ext_icsr) {
         /*
          * The Zicsr extension has been disabled, so let's ensure we don't
          * run the CSR instruction. Let's fill the address with a non
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index ec76dce6c9..3d09d0ee0e 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -168,6 +168,7 @@ static void create_fdt(SiFiveUState *s, const MemMapEntry 
*memmap,
     qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1);
 
     for (cpu = ms->smp.cpus - 1; cpu >= 0; cpu--) {
+        RISCVCPU *hart;
         int cpu_phandle = phandle++;
         nodename = g_strdup_printf("/cpus/cpu@%d", cpu);
         char *intc = g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
@@ -180,9 +181,11 @@ static void create_fdt(SiFiveUState *s, const MemMapEntry 
*memmap,
             } else {
                 qemu_fdt_setprop_string(fdt, nodename, "mmu-type", 
"riscv,sv48");
             }
-            isa = riscv_isa_string(&s->soc.u_cpus.harts[cpu - 1]);
+            hart = RISCV_CPU(qemu_get_cpu(cpu - 1));
+            isa = riscv_isa_string(hart);
         } else {
-            isa = riscv_isa_string(&s->soc.e_cpus.harts[0]);
+            hart = RISCV_CPU(qemu_get_cpu(0));
+            isa = riscv_isa_string(hart);
         }
         qemu_fdt_setprop_string(fdt, nodename, "riscv,isa", isa);
         qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv");
diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c
index 81f7e53aed..f3ec6427a1 100644
--- a/hw/riscv/spike.c
+++ b/hw/riscv/spike.c
@@ -97,29 +97,32 @@ static void create_fdt(SpikeState *s, const MemMapEntry 
*memmap,
     qemu_fdt_add_subnode(fdt, "/cpus/cpu-map");
 
     for (socket = (riscv_socket_count(ms) - 1); socket >= 0; socket--) {
+        uint32_t num_harts = s->soc[socket].num_harts;
+        uint32_t hartid_base = s->soc[socket].hartid_base;
+
         clust_name = g_strdup_printf("/cpus/cpu-map/cluster%d", socket);
         qemu_fdt_add_subnode(fdt, clust_name);
 
-        clint_cells =  g_new0(uint32_t, s->soc[socket].num_harts * 4);
+        clint_cells =  g_new0(uint32_t, num_harts * 4);
 
-        for (cpu = s->soc[socket].num_harts - 1; cpu >= 0; cpu--) {
+        for (cpu = num_harts - 1; cpu >= 0; cpu--) {
+            int cpu_index = hartid_base + cpu;
+            RISCVCPU *hart = RISCV_CPU(qemu_get_cpu(cpu_index));
             cpu_phandle = phandle++;
 
-            cpu_name = g_strdup_printf("/cpus/cpu@%d",
-                s->soc[socket].hartid_base + cpu);
+            cpu_name = g_strdup_printf("/cpus/cpu@%d", cpu_index);
             qemu_fdt_add_subnode(fdt, cpu_name);
             if (is_32_bit) {
                 qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", 
"riscv,sv32");
             } else {
                 qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", 
"riscv,sv48");
             }
-            name = riscv_isa_string(&s->soc[socket].harts[cpu]);
+            name = riscv_isa_string(hart);
             qemu_fdt_setprop_string(fdt, cpu_name, "riscv,isa", name);
             g_free(name);
             qemu_fdt_setprop_string(fdt, cpu_name, "compatible", "riscv");
             qemu_fdt_setprop_string(fdt, cpu_name, "status", "okay");
-            qemu_fdt_setprop_cell(fdt, cpu_name, "reg",
-                s->soc[socket].hartid_base + cpu);
+            qemu_fdt_setprop_cell(fdt, cpu_name, "reg", cpu_index);
             qemu_fdt_setprop_string(fdt, cpu_name, "device_type", "cpu");
             riscv_socket_fdt_write_id(ms, cpu_name, socket);
             qemu_fdt_setprop_cell(fdt, cpu_name, "phandle", cpu_phandle);
diff --git a/hw/riscv/virt-acpi-build.c b/hw/riscv/virt-acpi-build.c
index 7331248f59..d885220cc9 100644
--- a/hw/riscv/virt-acpi-build.c
+++ b/hw/riscv/virt-acpi-build.c
@@ -158,7 +158,7 @@ static void build_rhct(GArray *table_data,
     isa_offset = table_data->len - table.table_offset;
     build_append_int_noprefix(table_data, 0, 2);   /* Type 0 */
 
-    cpu = &s->soc[0].harts[0];
+    cpu = RISCV_CPU(cpu_by_arch_id(0));
     isa = riscv_isa_string(cpu);
     len = 8 + strlen(isa) + 1;
     aligned_len = (len % 2) ? (len + 1) : len;
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 5edc1d98d2..f3132ecc1b 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -239,16 +239,18 @@ static void create_fdt_socket_cpus(RISCVVirtState *s, int 
socket,
     uint32_t cpu_phandle;
     MachineState *ms = MACHINE(s);
     char *name, *cpu_name, *core_name, *intc_name, *sv_name;
+    uint32_t num_harts = s->soc[socket].num_harts;
+    uint32_t hartid_base = s->soc[socket].hartid_base;
     bool is_32_bit = riscv_is_32bit(&s->soc[0]);
     uint8_t satp_mode_max;
 
-    for (cpu = s->soc[socket].num_harts - 1; cpu >= 0; cpu--) {
-        RISCVCPU *cpu_ptr = &s->soc[socket].harts[cpu];
+    for (cpu = num_harts - 1; cpu >= 0; cpu--) {
+        int cpu_index = hartid_base + cpu;
+        RISCVCPU *cpu_ptr = RISCV_CPU(qemu_get_cpu(cpu_index));
 
         cpu_phandle = (*phandle)++;
 
-        cpu_name = g_strdup_printf("/cpus/cpu@%d",
-            s->soc[socket].hartid_base + cpu);
+        cpu_name = g_strdup_printf("/cpus/cpu@%d", cpu_index);
         qemu_fdt_add_subnode(ms->fdt, cpu_name);
 
         if (cpu_ptr->cfg.satp_mode.supported != 0) {
@@ -275,8 +277,7 @@ static void create_fdt_socket_cpus(RISCVVirtState *s, int 
socket,
 
         qemu_fdt_setprop_string(ms->fdt, cpu_name, "compatible", "riscv");
         qemu_fdt_setprop_string(ms->fdt, cpu_name, "status", "okay");
-        qemu_fdt_setprop_cell(ms->fdt, cpu_name, "reg",
-            s->soc[socket].hartid_base + cpu);
+        qemu_fdt_setprop_cell(ms->fdt, cpu_name, "reg", cpu_index);
         qemu_fdt_setprop_string(ms->fdt, cpu_name, "device_type", "cpu");
         riscv_socket_fdt_write_id(ms, cpu_name, socket);
         qemu_fdt_setprop_cell(ms->fdt, cpu_name, "phandle", cpu_phandle);
@@ -717,12 +718,12 @@ static void create_fdt_pmu(RISCVVirtState *s)
 {
     char *pmu_name;
     MachineState *ms = MACHINE(s);
-    RISCVCPU hart = s->soc[0].harts[0];
+    RISCVCPU *hart = RISCV_CPU(qemu_get_cpu(0));
 
     pmu_name = g_strdup_printf("/pmu");
     qemu_fdt_add_subnode(ms->fdt, pmu_name);
     qemu_fdt_setprop_string(ms->fdt, pmu_name, "compatible", "riscv,pmu");
-    riscv_pmu_generate_fdt_node(ms->fdt, hart.cfg.pmu_num, pmu_name);
+    riscv_pmu_generate_fdt_node(ms->fdt, hart->cfg.pmu_num, pmu_name);
 
     g_free(pmu_name);
 }
-- 
2.39.2




reply via email to

[Prev in Thread] Current Thread [Next in Thread]