Re: [VIRTIO PCI PATCH v5 1/1] transport-pci: Add freeze_mode to virtio_pci_common_cfg

[Chen, Jiqian]

Hi Michael S. Tsirkin,

On 2023/9/19 20:31, Michael S. Tsirkin wrote:
> On Tue, Sep 19, 2023 at 07:42:42PM +0800, Jiqian Chen wrote:
>> When guest vm does S3, Qemu will reset and clear some things of virtio
>> devices, but guest can't aware that, so that may cause some problems.
>> For excample, Qemu calls virtio_reset->virtio_gpu_gl_reset when guest
>> resume, that function will destroy render resources of virtio-gpu. As
>> a result, after guest resume, the display can't come back and we only
>> saw a black screen. Due to guest can't re-create all the resources, so
>> we need to let Qemu not to destroy them when S3.
>>
>> For above purpose, we need a mechanism that allows guests and QEMU to
>> negotiate their reset behavior. So this patch add a new parameter
>> named freeze_mode to struct virtio_pci_common_cfg. And when guest
>> suspends, it can write freeze_mode to be FREEZE_S3, and then virtio
>> devices can change their reset behavior on Qemu side according to
>> freeze_mode. What's more, freeze_mode can be used for all virtio
>> devices to affect the behavior of Qemu, not just virtio gpu device.
>>
>> Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
>> ---
>>  transport-pci.tex | 7 +++++++
>>  1 file changed, 7 insertions(+)
>>
>> diff --git a/transport-pci.tex b/transport-pci.tex
>> index a5c6719..2543536 100644
>> --- a/transport-pci.tex
>> +++ b/transport-pci.tex
>> @@ -319,6 +319,7 @@ \subsubsection{Common configuration structure 
>> layout}\label{sec:Virtio Transport
>>          le64 queue_desc;                /* read-write */
>>          le64 queue_driver;              /* read-write */
>>          le64 queue_device;              /* read-write */
>> +        le16 freeze_mode;               /* read-write */
>>          le16 queue_notif_config_data;   /* read-only for driver */
>>          le16 queue_reset;               /* read-write */
>>
> 
> we can't add fields in the middle of the structure like this -
> offset of queue_notif_config_data and queue_reset changes.
I have confused about this. I found in latest kernel code(master branch):
struct virtio_pci_common_cfg {
        /* About the whole device. */
        __le32 device_feature_select;   /* read-write */
        __le32 device_feature;          /* read-only */
        __le32 guest_feature_select;    /* read-write */
        __le32 guest_feature;           /* read-write */
        __le16 msix_config;             /* read-write */
        __le16 num_queues;              /* read-only */
        __u8 device_status;             /* read-write */
        __u8 config_generation;         /* read-only */

        /* About a specific virtqueue. */
        __le16 queue_select;            /* read-write */
        __le16 queue_size;              /* read-write, power of 2. */
        __le16 queue_msix_vector;       /* read-write */
        __le16 queue_enable;            /* read-write */
        __le16 queue_notify_off;        /* read-only */
        __le32 queue_desc_lo;           /* read-write */
        __le32 queue_desc_hi;           /* read-write */
        __le32 queue_avail_lo;          /* read-write */
        __le32 queue_avail_hi;          /* read-write */
        __le32 queue_used_lo;           /* read-write */
        __le32 queue_used_hi;           /* read-write */

        __le16 freeze_mode;             /* read-write */
};
There is no queue_notif_config_data or queue_reset, and freeze_mode I added is 
at the end. Why is it different from virtio-spec?
I add the offset for freeze_mode(VIRTIO_PCI_COMMON_F_MODE), and change the 
offset of Q_NDATA and Q_RESET
-#define VIRTIO_PCI_COMMON_Q_NDATA      56
-#define VIRTIO_PCI_COMMON_Q_RESET      58
+#define VIRTIO_PCI_COMMON_F_MODE       56
+#define VIRTIO_PCI_COMMON_Q_NDATA      58
+#define VIRTIO_PCI_COMMON_Q_RESET      60

> 
>   
>> @@ -393,6 +394,12 @@ \subsubsection{Common configuration structure 
>> layout}\label{sec:Virtio Transport
>>  \item[\field{queue_device}]
>>          The driver writes the physical address of Device Area here.  See 
>> section \ref{sec:Basic Facilities of a Virtio Device / Virtqueues}.
>>  
>> +\item[\field{freeze_mode}]
>> +        The driver writes this to set the freeze mode of virtio pci.
>> +        VIRTIO_PCI_FREEZE_MODE_UNFREEZE - virtio-pci is running;
>> +        VIRTIO_PCI_FREEZE_MODE_FREEZE_S3 - guest vm is doing S3, and 
>> virtio-pci enters S3 suspension;
>> +        Other values are reserved for future use, like S4, etc.
>> +
> 
> we need to specify these values then.
Thanks, I will add the values.

> 
> we also need
> - feature bit to detect support for S3
Do I need to add feature bit to DEFINE_VIRTIO_COMMON_FEATURES? And each time 
when I write freeze_mode filed on kernel driver side, I need to check this bit?

> - conformance statements documenting behavious under S3
Sorry, I am not very sure. Do you mean when freeze_mode is set FREEZE_S3, what 
operations should driver and device to do? Can you elaborate on it, or give an 
example?

> 
> 
>>  \item[\field{queue_notif_config_data}]
>>          This field exists only if VIRTIO_F_NOTIF_CONFIG_DATA has been 
>> negotiated.
>>          The driver will use this value when driver sends available buffer
>> -- 
>> 2.34.1
> 

-- 
Best regards,
Jiqian Chen.