[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v4 0/8] Add device STM32L4x5 RCC
From: |
Arnaud Minier |
Subject: |
[PATCH v4 0/8] Add device STM32L4x5 RCC |
Date: |
Tue, 30 Jan 2024 17:06:48 +0100 |
This patch adds the STM32L4x5 RCC (Reset and Clock Control) device and is part
of a series implementing the STM32L4x5 with a few peripherals.
Due to the high number of lines, I tried to split the patch into several
independent commits.
Each commit compiles on its own but I had to add temporary workarounds in
intermediary commits to allow them to compile even if some functions are not
used. However, they have been removed once the functions were used. Tell me if
this is ok or if I should remove them.
Also, the tests are not very exhaustive for the moment. I have not found a way
to test the clocks' frequency from the qtests, which limits severely the
exhaustiveness of the tests.
Thanks to Philippe Mathieu-Daudé and Luc Michel for guiding me toward the
hw/misc/bcm2835_cprman.c implementation and answering my questions about clock
emulation in qemu !
Changes from v1 to v2:
- Removed a mention in the tests
- Added an early return to prevent a clang compilation error in
rcc_update_pllsaixcfgr()
Changes from v2 to v3:
- Changed the timeout method used in the tests
- Added a real value for ICSR register
- Replaced some TODOs with correct error handling
- Added a commit that implements correct write protections for the CR register
Changes from v3 to v4:
- Rebased on top of current master
- Implemented reset functions for the multiplexers and the PLLs
- Added explanatory messages to every commit
- Addded logs for unimplemented registers
- Completed the VMState for the multiplexers and the PLLs
Arnaud Minier (8):
Implement STM32L4x5_RCC skeleton
Add an internal clock multiplexer object
Add an internal PLL Clock object
Add initialization information for PLLs and clock multiplexers
RCC: Handle Register Updates
Add write protections to CR register
STM32L4x5: Use the RCC Sysclk
Add tests for the STM32L4x5_RCC
MAINTAINERS | 5 +-
docs/system/arm/b-l475e-iot01a.rst | 2 +-
hw/arm/Kconfig | 1 +
hw/arm/b-l475e-iot01a.c | 10 +-
hw/arm/stm32l4x5_soc.c | 45 +-
hw/misc/Kconfig | 3 +
hw/misc/meson.build | 1 +
hw/misc/stm32l4x5_rcc.c | 1415 +++++++++++++++++++++
hw/misc/trace-events | 14 +
include/hw/arm/stm32l4x5_soc.h | 5 +-
include/hw/misc/stm32l4x5_rcc.h | 239 ++++
include/hw/misc/stm32l4x5_rcc_internals.h | 1042 +++++++++++++++
tests/qtest/meson.build | 3 +-
tests/qtest/stm32l4x5_rcc-test.c | 207 +++
14 files changed, 2947 insertions(+), 45 deletions(-)
create mode 100644 hw/misc/stm32l4x5_rcc.c
create mode 100644 include/hw/misc/stm32l4x5_rcc.h
create mode 100644 include/hw/misc/stm32l4x5_rcc_internals.h
create mode 100644 tests/qtest/stm32l4x5_rcc-test.c
--
2.34.1
- [PATCH v4 0/8] Add device STM32L4x5 RCC,
Arnaud Minier <=
- [PATCH v4 3/8] Add an internal PLL Clock object, Arnaud Minier, 2024/01/30
- [PATCH v4 4/8] Add initialization information for PLLs and clock multiplexers, Arnaud Minier, 2024/01/30
- [PATCH v4 7/8] STM32L4x5: Use the RCC Sysclk, Arnaud Minier, 2024/01/30
- [PATCH v4 6/8] Add write protections to CR register, Arnaud Minier, 2024/01/30
- [PATCH v4 5/8] RCC: Handle Register Updates, Arnaud Minier, 2024/01/30
- [PATCH v4 1/8] Implement STM32L4x5_RCC skeleton, Arnaud Minier, 2024/01/30
- [PATCH v4 2/8] Add an internal clock multiplexer object, Arnaud Minier, 2024/01/30