On Wed, 6 Nov 2024 at 08:42, Akihiko Odaki <akihiko.odaki@daynix.com
<mailto:akihiko.odaki@daynix.com>> wrote:
On 2024/11/06 0:30, Phil Dennis-Jordan wrote:
> From: Alexander Graf <graf@amazon.com <mailto:graf@amazon.com>>
>
> Apple defines a new "vmapple" machine type as part of its proprietary
> macOS Virtualization.Framework vmm. This machine type is similar
to the
> virt one, but with subtle differences in base devices, a few special
> vmapple device additions and a vastly different boot chain.
>
> This patch reimplements this machine type in QEMU. To use it, you
> have to have a readily installed version of macOS for VMApple,
> run on macOS with -accel hvf, pass the Virtualization.Framework
> boot rom (AVPBooter) in via -bios, pass the aux and root volume
as pflash
> and pass aux and root volume as virtio drives. In addition, you also
> need to find the machine UUID and pass that as -M vmapple,uuid=
parameter:
>
> $ qemu-system-aarch64 -accel hvf -M vmapple,uuid=0x1234 -m 4G \
> -bios /System/Library/Frameworks/Virtualization.framework/
Versions/A/Resources/AVPBooter.vmapple2.bin
> -drive file=aux,if=pflash,format=raw \
> -drive file=root,if=pflash,format=raw \
> -drive file=aux,if=none,id=aux,format=raw \
> -device vmapple-virtio-aux,drive=aux \
> -drive file=root,if=none,id=root,format=raw \
> -device vmapple-virtio-root,drive=root
>
> With all these in place, you should be able to see macOS booting
> successfully.
>
> Known issues:
> - Keyboard and mouse/tablet input is laggy. The reason for this is
> either that macOS's XHCI driver is broken when the device/
platform
> does not support MSI/MSI-X, or there's some unfortunate interplay
> with Qemu's XHCI implementation in this scenario.
> - Currently only macOS 12 guests are supported. The boot
process for
> 13+ will need further investigation and adjustment.
>
> Signed-off-by: Alexander Graf <graf@amazon.com
<mailto:graf@amazon.com>>
> Co-authored-by: Phil Dennis-Jordan <phil@philjordan.eu
<mailto:phil@philjordan.eu>>
> Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu
<mailto:phil@philjordan.eu>>
> ---
> v3:
> * Rebased on latest upstream, updated affinity and NIC creation
> API usage
> * Included Apple-variant virtio-blk in build dependency
> * Updated API usage for setting 'redist-region-count' array-
typed property on GIC.
> * Switched from virtio HID devices (for which macOS 12 does not
contain
> drivers) to an XHCI USB controller and USB HID devices.
>
> v4:
> * Fixups for v4 changes to the other patches in the set.
> * Corrected the assert macro to use
> * Removed superfluous endian conversions corresponding to cfg's.
> * Init error handling improvement.
> * No need to select CPU type on TCG, as only HVF is supported.
> * Machine type version bumped to 9.2
> * #include order improved
>
> v5:
> * Fixed memory reservation for ecam alias region.
> * Better error handling setting properties on devices.
> * Simplified the machine ECID/UUID extraction script and
actually created a
> file for it rather than quoting its code in documentation.
>
> v7:
> * Tiny error handling fix, un-inlined function.
>
> MAINTAINERS | 1 +
> contrib/vmapple/uuid.sh | 9 +
> docs/system/arm/vmapple.rst | 60 ++++
> docs/system/target-arm.rst | 1 +
> hw/vmapple/Kconfig | 20 ++
> hw/vmapple/meson.build | 1 +
> hw/vmapple/vmapple.c | 659 +++++++++++++++++++++++++++++
+++++++
> 7 files changed, 751 insertions(+)
> create mode 100755 contrib/vmapple/uuid.sh
> create mode 100644 docs/system/arm/vmapple.rst
> create mode 100644 hw/vmapple/vmapple.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 9d0d26cb65f..9591fd44a34 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2767,6 +2767,7 @@ R: Phil Dennis-Jordan <phil@philjordan.eu
<mailto:phil@philjordan.eu>>
> S: Maintained
> F: hw/vmapple/*
> F: include/hw/vmapple/*
> +F: docs/system/arm/vmapple.rst
>
> Subsystems
> ----------
> diff --git a/contrib/vmapple/uuid.sh b/contrib/vmapple/uuid.sh
> new file mode 100755
> index 00000000000..956e8c3afed
> --- /dev/null
> +++ b/contrib/vmapple/uuid.sh
> @@ -0,0 +1,9 @@
> +#!/bin/sh
> +# Used for converting a guest provisioned using
Virtualization.framework
> +# for use with the QEMU 'vmapple' aarch64 machine type.
> +#
> +# Extracts the Machine UUID from Virtualization.framework VM
JSON file.
> +# (as produced by 'macosvm', passed as command line argument)
> +
> +plutil -extract machineId raw "$1" | base64 -d | plutil -extract
ECID raw -
> +
> diff --git a/docs/system/arm/vmapple.rst b/docs/system/arm/
vmapple.rst
> new file mode 100644
> index 00000000000..6a634fa4572
> --- /dev/null
> +++ b/docs/system/arm/vmapple.rst
> @@ -0,0 +1,60 @@
> +VMApple machine emulation
>
+========================================================================================
> +
> +VMApple is the device model that the macOS built-in hypervisor
called "Virtualization.framework"
> +exposes to Apple Silicon macOS guests. The "vmapple" machine
model in QEMU implements the same
> +device model, but does not use any code from
Virtualization.Framework.
> +
> +Prerequisites
> +-------------
> +
> +To run the vmapple machine model, you need to
> +
> + * Run on Apple Silicon
> + * Run on macOS 12.0 or above
> + * Have an already installed copy of a Virtualization.Framework
macOS 12 virtual machine. I will
> + assume that you installed it using the macosvm CLI.
> +
> +First, we need to extract the UUID from the virtual machine that
you installed. You can do this
> +by running the shell script in contrib/vmapple/uuid.sh on the
macosvm.json file.
> +
> +.. code-block:: bash
> + :caption: uuid.sh script to extract the UUID from a
macosvm.json file
> +
> + $ contrib/vmapple/uuid.sh "path/to/macosvm.json"
> +
> +Now we also need to trim the aux partition. It contains metadata
that we can just discard:
> +
> +.. code-block:: bash
> + :caption: Command to trim the aux file
> +
> + $ dd if="aux.img" of="aux.img.trimmed" bs=$(( 0x4000 )) skip=1
> +
> +How to run
> +----------
> +
> +Then, we can launch QEMU with the Virtualization.Framework pre-
boot environment and the readily
> +installed target disk images. I recommend to port forward the
VM's ssh and vnc ports to the host
> +to get better interactive access into the target system:
> +
> +.. code-block:: bash
> + :caption: Example execution command line
> +
> + $ UUID=$(uuid.sh macosvm.json)
> + $ AVPBOOTER=/System/Library/Frameworks/
Virtualization.framework/Resources/AVPBooter.vmapple2.bin
> + $ AUX=aux.img.trimmed
> + $ DISK=disk.img
> + $ qemu-system-aarch64 \
> + -serial mon:stdio \
> + -m 4G \
> + -accel hvf \
> + -M vmapple,uuid=$UUID \
> + -bios $AVPBOOTER \
> + -drive file="$AUX",if=pflash,format=raw \
> + -drive file="$DISK",if=pflash,format=raw \
> + -drive file="$AUX",if=none,id=aux,format=raw \
> + -drive file="$DISK",if=none,id=root,format=raw \
> + -device vmapple-virtio-aux,drive=aux \
> + -device vmapple-virtio-root,drive=root \
> + -net
user,ipv6=off,hostfwd=tcp::2222-:22,hostfwd=tcp::5901-:5900 \
> + -net nic,model=virtio-net-pci \
> diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst
> index 9aaa9c414c9..3426f79100b 100644
> --- a/docs/system/target-arm.rst
> +++ b/docs/system/target-arm.rst
> @@ -102,6 +102,7 @@ Board-specific documentation
> arm/stellaris
> arm/stm32
> arm/virt
> + arm/vmapple
> arm/xenpvh
> arm/xlnx-versal-virt
> arm/xlnx-zynq
> diff --git a/hw/vmapple/Kconfig b/hw/vmapple/Kconfig
> index bcd1be63e3c..6a4c4a7fa2e 100644
> --- a/hw/vmapple/Kconfig
> +++ b/hw/vmapple/Kconfig
> @@ -10,3 +10,23 @@ config VMAPPLE_CFG
> config VMAPPLE_VIRTIO_BLK
> bool
>
> +config VMAPPLE
> + bool
> + depends on ARM
> + depends on HVF
> + default y if ARM
> + imply PCI_DEVICES
> + select ARM_GIC
> + select PLATFORM_BUS
> + select PCI_EXPRESS
> + select PCI_EXPRESS_GENERIC_BRIDGE
> + select PL011 # UART
> + select PL031 # RTC
> + select PL061 # GPIO
> + select GPIO_PWR
> + select PVPANIC_MMIO
> + select VMAPPLE_AES
> + select VMAPPLE_BDIF
> + select VMAPPLE_CFG
> + select MAC_PVG_MMIO
> + select VMAPPLE_VIRTIO_BLK
> diff --git a/hw/vmapple/meson.build b/hw/vmapple/meson.build
> index bf17cf906c9..e572f7d5602 100644
> --- a/hw/vmapple/meson.build
> +++ b/hw/vmapple/meson.build
> @@ -2,3 +2,4 @@ system_ss.add(when: 'CONFIG_VMAPPLE_AES',
if_true: files('aes.c'))
> system_ss.add(when: 'CONFIG_VMAPPLE_BDIF', if_true:
files('bdif.c'))
> system_ss.add(when: 'CONFIG_VMAPPLE_CFG', if_true: files('cfg.c'))
> system_ss.add(when: 'CONFIG_VMAPPLE_VIRTIO_BLK', if_true:
files('virtio-blk.c'))
> +specific_ss.add(when: 'CONFIG_VMAPPLE', if_true:
files('vmapple.c'))
> diff --git a/hw/vmapple/vmapple.c b/hw/vmapple/vmapple.c
> new file mode 100644
> index 00000000000..aac3ec35856
> --- /dev/null
> +++ b/hw/vmapple/vmapple.c
> @@ -0,0 +1,659 @@
> +/*
> + * VMApple machine emulation
> + *
> + * Copyright © 2023 Amazon.com, Inc. or its affiliates. All
Rights Reserved.
> + *
> + * This work is licensed under the terms of the GNU GPL, version
2 or later.
> + * See the COPYING file in the top-level directory.
> + *
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + *
> + * VMApple is the device model that the macOS built-in
hypervisor called
> + * "Virtualization.framework" exposes to Apple Silicon macOS
guests. The
> + * machine model in this file implements the same device model
in QEMU, but
> + * does not use any code from Virtualization.Framework.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu/bitops.h"
> +#include "qemu/datadir.h"
> +#include "qemu/error-report.h"
> +#include "qemu/guest-random.h"
> +#include "qemu/help-texts.h"
> +#include "qemu/log.h"
> +#include "qemu/module.h"
> +#include "qemu/option.h"
> +#include "qemu/units.h"
> +#include "monitor/qdev.h"
> +#include "hw/boards.h"
> +#include "hw/irq.h"
> +#include "hw/loader.h"
> +#include "hw/qdev-properties.h"
> +#include "hw/sysbus.h"
> +#include "hw/usb.h"
> +#include "hw/arm/boot.h"
> +#include "hw/arm/primecell.h"
> +#include "hw/char/pl011.h"
> +#include "hw/intc/arm_gic.h"
> +#include "hw/intc/arm_gicv3_common.h"
> +#include "hw/misc/pvpanic.h"
> +#include "hw/pci-host/gpex.h"
> +#include "hw/usb/xhci.h"
> +#include "hw/virtio/virtio-pci.h"
> +#include "hw/vmapple/vmapple.h"
> +#include "net/net.h"
> +#include "qapi/error.h"
> +#include "qapi/qmp/qlist.h"
> +#include "qapi/visitor.h"
> +#include "qapi/qapi-visit-common.h"
> +#include "standard-headers/linux/input.h"
> +#include "sysemu/hvf.h"
> +#include "sysemu/kvm.h"
> +#include "sysemu/reset.h"
> +#include "sysemu/runstate.h"
> +#include "sysemu/sysemu.h"
> +#include "target/arm/internals.h"
> +#include "target/arm/kvm_arm.h"
> +
> +struct VMAppleMachineClass {
> + MachineClass parent;
> +};
> +
> +struct VMAppleMachineState {
> + MachineState parent;
> +
> + Notifier machine_done;
> + struct arm_boot_info bootinfo;
> + MemMapEntry *memmap;
> + const int *irqmap;
> + DeviceState *gic;
> + DeviceState *cfg;
> + Notifier powerdown_notifier;
> + PCIBus *bus;
> + MemoryRegion fw_mr;
> + MemoryRegion ecam_alias;
> + uint64_t uuid;
> +};
> +
> +#define DEFINE_VMAPPLE_MACHINE_LATEST(major, minor, latest) \
> + static void
vmapple##major##_##minor##_class_init(ObjectClass *oc, \
> + void *data) \
> + { \
> + MachineClass *mc = MACHINE_CLASS(oc); \
> + vmapple_machine_##major##_##minor##_options(mc); \
> + mc->desc = "QEMU " # major "." # minor " Apple Virtual
Machine"; \
> + if (latest) { \
> + mc->alias = "vmapple"; \
> + } \
> + } \
> + static const TypeInfo machvmapple##major##_##minor##_info = { \
> + .name = MACHINE_TYPE_NAME("vmapple-" # major "." # minor), \
> + .parent = TYPE_VMAPPLE_MACHINE, \
> + .class_init = vmapple##major##_##minor##_class_init, \
> + }; \
> + static void machvmapple_machine_##major##_##minor##_init(void) \
> + { \
> +
type_register_static(&machvmapple##major##_##minor##_info); \
> + } \
> + type_init(machvmapple_machine_##major##_##minor##_init);
> +
> +#define DEFINE_VMAPPLE_MACHINE_AS_LATEST(major, minor) \
> + DEFINE_VMAPPLE_MACHINE_LATEST(major, minor, true)
> +#define DEFINE_VMAPPLE_MACHINE(major, minor) \
> + DEFINE_VMAPPLE_MACHINE_LATEST(major, minor, false)
> +
> +#define TYPE_VMAPPLE_MACHINE MACHINE_TYPE_NAME("vmapple")
> +OBJECT_DECLARE_TYPE(VMAppleMachineState, VMAppleMachineClass,
VMAPPLE_MACHINE)
> +
> +/* Number of external interrupt lines to configure the GIC with */
> +#define NUM_IRQS 256
> +
> +enum {
> + VMAPPLE_FIRMWARE,
> + VMAPPLE_CONFIG,
> + VMAPPLE_MEM,
> + VMAPPLE_GIC_DIST,
> + VMAPPLE_GIC_REDIST,
> + VMAPPLE_UART,
> + VMAPPLE_RTC,
> + VMAPPLE_PCIE,
> + VMAPPLE_PCIE_MMIO,
> + VMAPPLE_PCIE_ECAM,
> + VMAPPLE_GPIO,
> + VMAPPLE_PVPANIC,
> + VMAPPLE_APV_GFX,
> + VMAPPLE_APV_IOSFC,
> + VMAPPLE_AES_1,
> + VMAPPLE_AES_2,
> + VMAPPLE_BDOOR,
> + VMAPPLE_MEMMAP_LAST,
> +};
> +
> +static MemMapEntry memmap[] = {
> + [VMAPPLE_FIRMWARE] = { 0x00100000, 0x00100000 },
> + [VMAPPLE_CONFIG] = { 0x00400000, 0x00010000 },
> +
> + [VMAPPLE_GIC_DIST] = { 0x10000000, 0x00010000 },
> + [VMAPPLE_GIC_REDIST] = { 0x10010000, 0x00400000 },
> +
> + [VMAPPLE_UART] = { 0x20010000, 0x00010000 },
> + [VMAPPLE_RTC] = { 0x20050000, 0x00001000 },
> + [VMAPPLE_GPIO] = { 0x20060000, 0x00001000 },
> + [VMAPPLE_PVPANIC] = { 0x20070000, 0x00000002 },
> + [VMAPPLE_BDOOR] = { 0x30000000, 0x00200000 },
> + [VMAPPLE_APV_GFX] = { 0x30200000, 0x00010000 },
> + [VMAPPLE_APV_IOSFC] = { 0x30210000, 0x00010000 },
> + [VMAPPLE_AES_1] = { 0x30220000, 0x00004000 },
> + [VMAPPLE_AES_2] = { 0x30230000, 0x00004000 },
> + [VMAPPLE_PCIE_ECAM] = { 0x40000000, 0x10000000 },
> + [VMAPPLE_PCIE_MMIO] = { 0x50000000, 0x1fff0000 },
> +
> + /* Actual RAM size depends on configuration */
> + [VMAPPLE_MEM] = { 0x70000000ULL, GiB},
> +};
> +
> +static const int irqmap[] = {
> + [VMAPPLE_UART] = 1,
> + [VMAPPLE_RTC] = 2,
> + [VMAPPLE_GPIO] = 0x5,
> + [VMAPPLE_APV_IOSFC] = 0x10,
> + [VMAPPLE_APV_GFX] = 0x11,
> + [VMAPPLE_AES_1] = 0x12,
> + [VMAPPLE_PCIE] = 0x20,
> +};
> +
> +#define GPEX_NUM_IRQS 16
> +
> +static void create_bdif(VMAppleMachineState *vms, MemoryRegion *mem)
> +{
> + DeviceState *bdif;
> + SysBusDevice *bdif_sb;
> + DriveInfo *di_aux = drive_get(IF_PFLASH, 0, 0);
> + DriveInfo *di_root = drive_get(IF_PFLASH, 0, 1);
> +
> + if (!di_aux) {
> + error_report("No AUX device. Please specify one as
pflash drive.");
> + exit(1);
> + }
> +
> + if (!di_root) {
> + /* Fall back to the first IF_VIRTIO device as root device */
> + di_root = drive_get(IF_VIRTIO, 0, 0);
> + }
> +
> + if (!di_root) {
> + error_report("No root device. Please specify one as
virtio drive.");
> + exit(1);
> + }
> +
> + /* PV backdoor device */
> + bdif = qdev_new(TYPE_VMAPPLE_BDIF);
> + bdif_sb = SYS_BUS_DEVICE(bdif);
> + sysbus_mmio_map(bdif_sb, 0, vms->memmap[VMAPPLE_BDOOR].base);
> +
> + qdev_prop_set_drive(DEVICE(bdif), "aux",
blk_by_legacy_dinfo(di_aux));
> + qdev_prop_set_drive(DEVICE(bdif), "root",
blk_by_legacy_dinfo(di_root));
> +
> + sysbus_realize_and_unref(bdif_sb, &error_fatal);
> +}
> +
> +static void create_pvpanic(VMAppleMachineState *vms,
MemoryRegion *mem)
> +{
> + SysBusDevice *cfg;
> +
> + vms->cfg = qdev_new(TYPE_PVPANIC_MMIO_DEVICE);
> + cfg = SYS_BUS_DEVICE(vms->cfg);
> + sysbus_mmio_map(cfg, 0, vms->memmap[VMAPPLE_PVPANIC].base);
> +
> + sysbus_realize_and_unref(cfg, &error_fatal);
> +}
> +
> +static void create_cfg(VMAppleMachineState *vms, MemoryRegion *mem)
> +{
> + SysBusDevice *cfg;
> + MachineState *machine = MACHINE(vms);
> + uint32_t rnd = 1;
> +
> + vms->cfg = qdev_new(TYPE_VMAPPLE_CFG);
> + cfg = SYS_BUS_DEVICE(vms->cfg);
> + sysbus_mmio_map(cfg, 0, vms->memmap[VMAPPLE_CONFIG].base);
> +
> + qemu_guest_getrandom_nofail(&rnd, sizeof(rnd));
> +
> + qdev_prop_set_uint32(vms->cfg, "nr-cpus", machine->smp.cpus);
> + qdev_prop_set_uint64(vms->cfg, "ecid", vms->uuid);
> + qdev_prop_set_uint64(vms->cfg, "ram-size", machine->ram_size);
> + qdev_prop_set_uint32(vms->cfg, "rnd", rnd);
> +
> + sysbus_realize_and_unref(cfg, &error_fatal);
> +}
> +
> +static void create_gfx(VMAppleMachineState *vms, MemoryRegion *mem)
> +{
> + int irq_gfx = vms->irqmap[VMAPPLE_APV_GFX];
> + int irq_iosfc = vms->irqmap[VMAPPLE_APV_IOSFC];
> + SysBusDevice *gfx;
> +
> + gfx = SYS_BUS_DEVICE(qdev_new("apple-gfx-mmio"));
> + sysbus_mmio_map(gfx, 0, vms->memmap[VMAPPLE_APV_GFX].base);
> + sysbus_mmio_map(gfx, 1, vms->memmap[VMAPPLE_APV_IOSFC].base);
> + sysbus_connect_irq(gfx, 0, qdev_get_gpio_in(vms->gic, irq_gfx));
> + sysbus_connect_irq(gfx, 1, qdev_get_gpio_in(vms->gic,
irq_iosfc));
> + sysbus_realize_and_unref(gfx, &error_fatal);
> +}
> +
> +static void create_aes(VMAppleMachineState *vms, MemoryRegion *mem)
> +{
> + int irq = vms->irqmap[VMAPPLE_AES_1];
> + SysBusDevice *aes;
> +
> + aes = SYS_BUS_DEVICE(qdev_new(TYPE_APPLE_AES));
> + sysbus_mmio_map(aes, 0, vms->memmap[VMAPPLE_AES_1].base);
> + sysbus_mmio_map(aes, 1, vms->memmap[VMAPPLE_AES_2].base);
> + sysbus_connect_irq(aes, 0, qdev_get_gpio_in(vms->gic, irq));
> + sysbus_realize_and_unref(aes, &error_fatal);
> +}
> +
> +static int arm_gic_ppi_index(int cpu_nr, int ppi_index)
> +{
> + return NUM_IRQS + cpu_nr * GIC_INTERNAL + ppi_index;
> +}
> +
> +static void create_gic(VMAppleMachineState *vms, MemoryRegion *mem)
> +{
> + MachineState *ms = MACHINE(vms);
> + /* We create a standalone GIC */
> + SysBusDevice *gicbusdev;
> + QList *redist_region_count;
> + int i;
> + unsigned int smp_cpus = ms->smp.cpus;
> +
> + vms->gic = qdev_new(gicv3_class_name());
> + qdev_prop_set_uint32(vms->gic, "revision", 3);
> + qdev_prop_set_uint32(vms->gic, "num-cpu", smp_cpus);
> + /*
> + * Note that the num-irq property counts both internal and
external
> + * interrupts; there are always 32 of the former (mandated
by GIC spec).
> + */
> + qdev_prop_set_uint32(vms->gic, "num-irq", NUM_IRQS + 32);
> +
> + uint32_t redist0_capacity =
> + vms->memmap[VMAPPLE_GIC_REDIST].size /
GICV3_REDIST_SIZE;
> + uint32_t redist0_count = MIN(smp_cpus, redist0_capacity);
> +
> + redist_region_count = qlist_new();
> + qlist_append_int(redist_region_count, redist0_count);
> + qdev_prop_set_array(vms->gic, "redist-region-count",
redist_region_count);
> +
> + gicbusdev = SYS_BUS_DEVICE(vms->gic);
> + sysbus_realize_and_unref(gicbusdev, &error_fatal);
> + sysbus_mmio_map(gicbusdev, 0, vms-
>memmap[VMAPPLE_GIC_DIST].base);
> + sysbus_mmio_map(gicbusdev, 1, vms-
>memmap[VMAPPLE_GIC_REDIST].base);
> +
> + /*
> + * Wire the outputs from each CPU's generic timer and the GICv3
> + * maintenance interrupt signal to the appropriate GIC PPI
inputs,
> + * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the
CPU's inputs.
> + */
> + for (i = 0; i < smp_cpus; i++) {
> + DeviceState *cpudev = DEVICE(qemu_get_cpu(i));
> +
> + /* Map the virt timer to PPI 27 */
> + qdev_connect_gpio_out(cpudev, GTIMER_VIRT,
> + qdev_get_gpio_in(vms->gic,
> +
arm_gic_ppi_index(i, 27)));
> +
> + /* Map the GIC IRQ and FIQ lines to CPU */
> + sysbus_connect_irq(gicbusdev, i,
qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
> + sysbus_connect_irq(gicbusdev, i + smp_cpus,
> + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
> + }
> +}
> +
> +static void create_uart(const VMAppleMachineState *vms, int uart,
> + MemoryRegion *mem, Chardev *chr)
> +{
> + hwaddr base = vms->memmap[uart].base;
> + int irq = vms->irqmap[uart];
> + DeviceState *dev = qdev_new(TYPE_PL011);
> + SysBusDevice *s = SYS_BUS_DEVICE(dev);
> +
> + qdev_prop_set_chr(dev, "chardev", chr);
> + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
> + memory_region_add_subregion(mem, base,
> + sysbus_mmio_get_region(s, 0));
> + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq));
> +}
> +
> +static void create_rtc(const VMAppleMachineState *vms)
> +{
> + hwaddr base = vms->memmap[VMAPPLE_RTC].base;
> + int irq = vms->irqmap[VMAPPLE_RTC];
> +
> + sysbus_create_simple("pl031", base, qdev_get_gpio_in(vms-
>gic, irq));
> +}
> +
> +static DeviceState *gpio_key_dev;
> +static void vmapple_powerdown_req(Notifier *n, void *opaque)
> +{
> + /* use gpio Pin 3 for power button event */
> + qemu_set_irq(qdev_get_gpio_in(gpio_key_dev, 0), 1);
> +}
> +
> +static void create_gpio_devices(const VMAppleMachineState *vms,
int gpio,
> + MemoryRegion *mem)
> +{
> + DeviceState *pl061_dev;
> + hwaddr base = vms->memmap[gpio].base;
> + int irq = vms->irqmap[gpio];
> + SysBusDevice *s;
> +
> + pl061_dev = qdev_new("pl061");
> + /* Pull lines down to 0 if not driven by the PL061 */
> + qdev_prop_set_uint32(pl061_dev, "pullups", 0);
> + qdev_prop_set_uint32(pl061_dev, "pulldowns", 0xff);
> + s = SYS_BUS_DEVICE(pl061_dev);
> + sysbus_realize_and_unref(s, &error_fatal);
> + memory_region_add_subregion(mem, base,
sysbus_mmio_get_region(s, 0));
> + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq));
> + gpio_key_dev = sysbus_create_simple("gpio-key", -1,
> +
qdev_get_gpio_in(pl061_dev, 3));
> +}
> +
> +static void vmapple_firmware_init(VMAppleMachineState *vms,
> + MemoryRegion *sysmem)
> +{
> + hwaddr size = vms->memmap[VMAPPLE_FIRMWARE].size;
> + hwaddr base = vms->memmap[VMAPPLE_FIRMWARE].base;
> + const char *bios_name;
> + int image_size;
> + char *fname;
> +
> + bios_name = MACHINE(vms)->firmware;
> + if (!bios_name) {
> + error_report("No firmware specified");
> + exit(1);
> + }
> +
> + fname = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
> + if (!fname) {
> + error_report("Could not find ROM image '%s'", bios_name);
> + exit(1);
> + }
> +
> + memory_region_init_ram(&vms->fw_mr, NULL, "firmware", size,
&error_fatal);
> + image_size = load_image_mr(fname, &vms->fw_mr);
> +
> + g_free(fname);
> + if (image_size < 0) {
> + error_report("Could not load ROM image '%s'", bios_name);
> + exit(1);
> + }
> +
> + memory_region_add_subregion(get_system_memory(), base, &vms-
>fw_mr);
> +}
> +
> +static void create_pcie(VMAppleMachineState *vms)
> +{
> + hwaddr base_mmio = vms->memmap[VMAPPLE_PCIE_MMIO].base;
> + hwaddr size_mmio = vms->memmap[VMAPPLE_PCIE_MMIO].size;
> + hwaddr base_ecam = vms->memmap[VMAPPLE_PCIE_ECAM].base;
> + hwaddr size_ecam = vms->memmap[VMAPPLE_PCIE_ECAM].size;
> + int irq = vms->irqmap[VMAPPLE_PCIE];
> + MemoryRegion *mmio_alias;
> + MemoryRegion *mmio_reg;
> + MemoryRegion *ecam_reg;
> + DeviceState *dev;
> + int i;
> + PCIHostState *pci;
> + DeviceState *usb_controller;
> + USBBus *usb_bus;
> +
> + dev = qdev_new(TYPE_GPEX_HOST);
> + qdev_prop_set_uint32(dev, "num-irqs", GPEX_NUM_IRQS);
> + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
> +
> + /* Map only the first size_ecam bytes of ECAM space */
> + ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
> + memory_region_init_alias(&vms->ecam_alias, OBJECT(dev),
"pcie-ecam",
> + ecam_reg, 0, size_ecam);
> + memory_region_add_subregion(get_system_memory(), base_ecam,
> + &vms->ecam_alias);
> +
> + /*
> + * Map the MMIO window from [0x50000000-0x7fff0000] in PCI
space into
> + * system address space at [0x50000000-0x7fff0000].
> + */
> + mmio_alias = g_new0(MemoryRegion, 1);
> + mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1);
> + memory_region_init_alias(mmio_alias, OBJECT(dev), "pcie-mmio",
> + mmio_reg, base_mmio, size_mmio);
> + memory_region_add_subregion(get_system_memory(), base_mmio,
mmio_alias);
> +
> + for (i = 0; i < GPEX_NUM_IRQS; i++) {
> + sysbus_connect_irq(SYS_BUS_DEVICE(dev), i,
> + qdev_get_gpio_in(vms->gic, irq + i));
> + gpex_set_irq_num(GPEX_HOST(dev), i, irq + i);
> + }
> +
> + pci = PCI_HOST_BRIDGE(dev);
> + vms->bus = pci->bus;
> + g_assert(vms->bus);
> +
> + while ((dev = qemu_create_nic_device("virtio-net-pci", true,
NULL))) {
> + qdev_realize_and_unref(dev, BUS(vms->bus), &error_fatal);
> + }
> +
> + usb_controller = qdev_new(TYPE_QEMU_XHCI);
> + qdev_realize_and_unref(usb_controller, BUS(pci->bus),
&error_fatal);
> +
> + usb_bus = USB_BUS(object_resolve_type_unambiguous(TYPE_USB_BUS,
> +
&error_fatal));
> + usb_create_simple(usb_bus, "usb-kbd");
> + usb_create_simple(usb_bus, "usb-tablet");
> +}
> +
> +static void vmapple_reset(void *opaque)
> +{
> + VMAppleMachineState *vms = opaque;
> + hwaddr base = vms->memmap[VMAPPLE_FIRMWARE].base;
> +
> + cpu_set_pc(first_cpu, base);
> +}
> +
> +static void mach_vmapple_init(MachineState *machine)
> +{
> + VMAppleMachineState *vms = VMAPPLE_MACHINE(machine);
> + MachineClass *mc = MACHINE_GET_CLASS(machine);
> + const CPUArchIdList *possible_cpus;
> + MemoryRegion *sysmem = get_system_memory();
> + int n;
> + unsigned int smp_cpus = machine->smp.cpus;
> + unsigned int max_cpus = machine->smp.max_cpus;
> +
> + vms->memmap = memmap;
> + machine->usb = true;
> +
> + possible_cpus = mc->possible_cpu_arch_ids(machine);
> + assert(possible_cpus->len == max_cpus);
> + for (n = 0; n < possible_cpus->len; n++) {
> + Object *cpu;
> + CPUState *cs;
> +
> + if (n >= smp_cpus) {
> + break;
> + }
> +
> + cpu = object_new(possible_cpus->cpus[n].type);
> + object_property_set_int(cpu, "mp-affinity",
> + possible_cpus->cpus[n].arch_id,
&error_fatal);
> +
> + cs = CPU(cpu);
> + cs->cpu_index = n;
> +
> + numa_cpu_pre_plug(&possible_cpus->cpus[cs->cpu_index],
DEVICE(cpu),
> + &error_fatal);
> +
> + if (object_property_find(cpu, "has_el3")) {
> + object_property_set_bool(cpu, "has_el3", false,
&error_fatal);
> + }
> + if (object_property_find(cpu, "has_el2")) {
> + object_property_set_bool(cpu, "has_el2", false,
&error_fatal);
> + }
> + object_property_set_int(cpu, "psci-conduit",
QEMU_PSCI_CONDUIT_HVC,
> + &error_fatal);
> +
> + /* Secondary CPUs start in PSCI powered-down state */
> + if (n > 0) {
> + object_property_set_bool(cpu, "start-powered-off", true,
> + &error_fatal);
> + }
> +
> + object_property_set_link(cpu, "memory", OBJECT(sysmem),
&error_abort);
> + qdev_realize(DEVICE(cpu), NULL, &error_fatal);
> + object_unref(cpu);
> + }
> +
> + memory_region_add_subregion(sysmem, vms-
>memmap[VMAPPLE_MEM].base,
> + machine->ram);
> +
> + create_gic(vms, sysmem);
> + create_bdif(vms, sysmem);
> + create_pvpanic(vms, sysmem);
> + create_aes(vms, sysmem);
> + create_gfx(vms, sysmem);
> + create_uart(vms, VMAPPLE_UART, sysmem, serial_hd(0));
> + create_rtc(vms);
> + create_pcie(vms);
> +
> + create_gpio_devices(vms, VMAPPLE_GPIO, sysmem);
> +
> + vmapple_firmware_init(vms, sysmem);
> + create_cfg(vms, sysmem);
> +
> + /* connect powerdown request */
> + vms->powerdown_notifier.notify = vmapple_powerdown_req;
> + qemu_register_powerdown_notifier(&vms->powerdown_notifier);
> +
> + vms->bootinfo.ram_size = machine->ram_size;
> + vms->bootinfo.board_id = -1;
> + vms->bootinfo.loader_start = vms->memmap[VMAPPLE_MEM].base;
> + vms->bootinfo.skip_dtb_autoload = true;
> + vms->bootinfo.firmware_loaded = true;
> + arm_load_kernel(ARM_CPU(first_cpu), machine, &vms->bootinfo);
> +
> + qemu_register_reset(vmapple_reset, vms);
> +}
> +
> +static CpuInstanceProperties
> +vmapple_cpu_index_to_props(MachineState *ms, unsigned cpu_index)
> +{
> + MachineClass *mc = MACHINE_GET_CLASS(ms);
> + const CPUArchIdList *possible_cpus = mc-
>possible_cpu_arch_ids(ms);
> +
> + assert(cpu_index < possible_cpus->len);
> + return possible_cpus->cpus[cpu_index].props;
> +}
> +
> +
> +static int64_t vmapple_get_default_cpu_node_id(const
MachineState *ms, int idx)
> +{
> + return idx % ms->numa_state->num_nodes;
> +}
> +
> +static const CPUArchIdList
*vmapple_possible_cpu_arch_ids(MachineState *ms)
> +{
> + int n;
> + unsigned int max_cpus = ms->smp.max_cpus;
> +
> + if (ms->possible_cpus) {
> + assert(ms->possible_cpus->len == max_cpus);
> + return ms->possible_cpus;
> + }
> +
> + ms->possible_cpus = g_malloc0(sizeof(CPUArchIdList) +
> + sizeof(CPUArchId) * max_cpus);
> + ms->possible_cpus->len = max_cpus;
> + for (n = 0; n < ms->possible_cpus->len; n++) {
> + ms->possible_cpus->cpus[n].type = ms->cpu_type;
> + ms->possible_cpus->cpus[n].arch_id =
> + arm_build_mp_affinity(n, GICV3_TARGETLIST_BITS);
> + ms->possible_cpus->cpus[n].props.has_thread_id = true;
> + ms->possible_cpus->cpus[n].props.thread_id = n;
> + }
> + return ms->possible_cpus;
> +}
> +
> +static void vmapple_get_uuid(Object *obj, Visitor *v, const char
*name,
> + void *opaque, Error **errp)
> +{
> + VMAppleMachineState *vms = VMAPPLE_MACHINE(obj);
> +
> + visit_type_uint64(v, name, &vms->uuid, errp);
> +}
> +
> +static void vmapple_set_uuid(Object *obj, Visitor *v, const char
*name,
> + void *opaque, Error **errp)
> +{
> + VMAppleMachineState *vms = VMAPPLE_MACHINE(obj);
> + Error *error = NULL;
> +
> + visit_type_uint64(v, name, &vms->uuid, &error);
> + if (error) {
> + error_propagate(errp, error);
> + return;
> + }
> +}
> +
> +static void vmapple_machine_class_init(ObjectClass *oc, void *data)
> +{
> + MachineClass *mc = MACHINE_CLASS(oc);
> +
> + mc->init = mach_vmapple_init;
> + mc->max_cpus = 32;
> + mc->block_default_type = IF_VIRTIO;
> + mc->no_cdrom = 1;
> + mc->pci_allow_0_address = true;
> + mc->minimum_page_bits = 12;
> + mc->possible_cpu_arch_ids = vmapple_possible_cpu_arch_ids;
> + mc->cpu_index_to_instance_props = vmapple_cpu_index_to_props;
> + mc->default_cpu_type = ARM_CPU_TYPE_NAME("host");
> + mc->get_default_cpu_node_id = vmapple_get_default_cpu_node_id;
> + mc->default_ram_id = "mach-vmapple.ram";
> +
> + object_register_sugar_prop(TYPE_VIRTIO_PCI, "disable-legacy",
> + "on", true);
> +
> + object_class_property_add(oc, "uuid", "uint64",
vmapple_get_uuid,
> + vmapple_set_uuid, NULL, NULL);
Use: object_class_property_add_uint64_ptr
Do I understand correctly that to use this, I need to move the uuid
field out of VMAppleMachineState and turn it into a global/static
variable? There are no active uses of
object_class_property_add_uint64_ptr (or the uint32 version) in the Qemu
code base to use as reference, but that's what it looks like based on
the single use of object_class_property_add_uint8_ptr.
I'm not convinced this is an improvement to be honest. (And the lack of
uptake of this API would suggest I'm not the only one who finds this an
awkward API - on the other hand, there are lots of examples of
object_class_property_add() being used for uint64-typed properties
exactly as Alex has done here.)