RE: [PATCH] hw/arm/npcm8xx_boards: Add auto zero flash image and device part number

[address@hidden]

From: Tim Lee <timlee660101@gmail.com>
Sent: Tuesday, April 1, 2025 4:59 PM
To: peter.maydell@linaro.org
Cc: qemu-arm@nongnu.org; qemu-devel@nongnu.org; wuhaotsh@google.com; CS20 
CHLi30 <CHLI30@nuvoton.com>; CS20 KFTing <KFTING@nuvoton.com>; Tim Lee 
<timlee660101@gmail.com>
Subject: [PATCH] hw/arm/npcm8xx_boards: Add auto zero flash image and device 
part number


Fix flash device part number to `mx66l1g45g` according image-bmc run on npcm8xx 
evb board (SPIFlash...SF: Detected mx66l1g45g, total 128 MiB)

And add auto zero flash image size to resolve error below after executing
`./qemu-system-aarch64 -machine npcm845-evb -drive file=image-bmc`

Error message:
qemu-system-aarch64: mx66l1g45g device '/machine/unattached/device[73]'
requires 134217728 bytes, mtd0 block backend provides 67108864 bytes

Tested:
Build passes and runs ./qemu-system-aarch64 -machine npcm845-evb normally

Signed-off-by: Tim Lee <timlee660101@gmail.com>
---
 hw/arm/npcm8xx_boards.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/hw/arm/npcm8xx_boards.c b/hw/arm/npcm8xx_boards.c index 
3fb8478e72..11b792c613 100644
--- a/hw/arm/npcm8xx_boards.c
+++ b/hw/arm/npcm8xx_boards.c
@@ -27,6 +27,7 @@
 #include "qemu/error-report.h"
 #include "qemu/datadir.h"
 #include "qemu/units.h"
+#include "system/block-backend.h"

 #define NPCM845_EVB_POWER_ON_STRAPS 0x000017ff

@@ -59,10 +60,21 @@ static void npcm8xx_connect_flash(NPCM7xxFIUState *fiu, int 
cs_no,  {
     DeviceState *flash;
     qemu_irq flash_cs;
+    BlockBackend *blk;
+    uint64_t blk_size, perm, shared_perm;

     flash = qdev_new(flash_type);
     if (dinfo) {
         qdev_prop_set_drive(flash, "drive", blk_by_legacy_dinfo(dinfo));
+        blk = blk_by_legacy_dinfo(dinfo);
+        blk_size = blk_getlength(blk);
+        if (blk_size < fiu->flash_size) {
+            blk_get_perm(blk, &perm, &shared_perm);
+            blk_set_perm(blk, BLK_PERM_ALL, BLK_PERM_ALL, &error_abort);
+            blk_truncate(blk, fiu->flash_size, true, PREALLOC_MODE_OFF,
+                         BDRV_REQ_ZERO_WRITE, &error_abort);
+            blk_set_perm(blk, perm, shared_perm, &error_abort);
+        }
     }
     qdev_realize_and_unref(flash, BUS(fiu->spi), &error_fatal);

@@ -194,7 +206,8 @@ static void npcm845_evb_init(MachineState *machine)
     qdev_realize(DEVICE(soc), NULL, &error_fatal);

     npcm8xx_load_bootrom(machine, soc);
-    npcm8xx_connect_flash(&soc->fiu[0], 0, "w25q256", drive_get(IF_MTD, 0, 0));
+    npcm8xx_connect_flash(&soc->fiu[0], 0, "mx66l1g45g",
+                          drive_get(IF_MTD, 0, 0));
     npcm845_evb_i2c_init(soc);
     npcm845_evb_fan_init(NPCM8XX_MACHINE(machine), soc);
     npcm8xx_load_kernel(machine, soc);
--
2.34.1

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>

________________________________
________________________________
 The privileged confidential information contained in this email is intended 
for use only by the addressees as indicated by the original sender of this 
email. If you are not the addressee indicated in this email or are not 
responsible for delivery of the email to such a person, please kindly reply to 
the sender indicating this fact and delete all copies of it from your computer 
and network server immediately. Your cooperation is highly appreciated. It is 
advised that any unauthorized use of confidential information of Nuvoton is 
strictly prohibited; and any information in this email irrelevant to the 
official business of Nuvoton shall be deemed as neither given nor endorsed by 
Nuvoton.