[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 2/8] hw/intc/loongarch_extioi: Add reset support
From: |
Bibo Mao |
Subject: |
[PULL 2/8] hw/intc/loongarch_extioi: Add reset support |
Date: |
Tue, 6 May 2025 09:55:47 +0800 |
Add reset support with extioi irqchip, and register reset callback
support with new API resettable_class_set_parent_phases(). Clear
internal HW registers and SW state when virt machine resets.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
---
hw/intc/loongarch_extioi_common.c | 41 +++++++++++++++++++++++
include/hw/intc/loongarch_extioi_common.h | 1 +
2 files changed, 42 insertions(+)
diff --git a/hw/intc/loongarch_extioi_common.c
b/hw/intc/loongarch_extioi_common.c
index 9e1589060c..4a904b3bc1 100644
--- a/hw/intc/loongarch_extioi_common.c
+++ b/hw/intc/loongarch_extioi_common.c
@@ -108,6 +108,43 @@ static void loongarch_extioi_common_realize(DeviceState
*dev, Error **errp)
}
}
+static void loongarch_extioi_common_reset_hold(Object *obj, ResetType type)
+{
+ LoongArchExtIOICommonClass *lecc = LOONGARCH_EXTIOI_COMMON_GET_CLASS(obj);
+ LoongArchExtIOICommonState *s = LOONGARCH_EXTIOI_COMMON(obj);
+ ExtIOICore *core;
+ int i;
+
+ if (lecc->parent_phases.hold) {
+ lecc->parent_phases.hold(obj, type);
+ }
+
+ /* Clear HW registers for the board */
+ memset(s->nodetype, 0, sizeof(s->nodetype));
+ memset(s->bounce, 0, sizeof(s->bounce));
+ memset(s->isr, 0, sizeof(s->isr));
+ memset(s->enable, 0, sizeof(s->enable));
+ memset(s->ipmap, 0, sizeof(s->ipmap));
+ memset(s->coremap, 0, sizeof(s->coremap));
+ memset(s->sw_pending, 0, sizeof(s->sw_pending));
+ memset(s->sw_ipmap, 0, sizeof(s->sw_ipmap));
+ memset(s->sw_coremap, 0, sizeof(s->sw_coremap));
+
+ for (i = 0; i < s->num_cpu; i++) {
+ core = s->cpu + i;
+ /* EXTIOI with targeted CPU available however not present */
+ if (!core->cpu) {
+ continue;
+ }
+
+ /* Clear HW registers for CPUs */
+ memset(core->coreisr, 0, sizeof(core->coreisr));
+ memset(core->sw_isr, 0, sizeof(core->sw_isr));
+ }
+
+ s->status = 0;
+}
+
static int loongarch_extioi_common_pre_save(void *opaque)
{
LoongArchExtIOICommonState *s = (LoongArchExtIOICommonState *)opaque;
@@ -180,9 +217,13 @@ static void loongarch_extioi_common_class_init(ObjectClass
*klass,
DeviceClass *dc = DEVICE_CLASS(klass);
LoongArchExtIOICommonClass *lecc = LOONGARCH_EXTIOI_COMMON_CLASS(klass);
HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(klass);
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
device_class_set_parent_realize(dc, loongarch_extioi_common_realize,
&lecc->parent_realize);
+ resettable_class_set_parent_phases(rc, NULL,
+ loongarch_extioi_common_reset_hold,
+ NULL, &lecc->parent_phases);
device_class_set_props(dc, extioi_properties);
dc->vmsd = &vmstate_loongarch_extioi;
hc->plug = loongarch_extioi_cpu_plug;
diff --git a/include/hw/intc/loongarch_extioi_common.h
b/include/hw/intc/loongarch_extioi_common.h
index 22d7880977..735bfee80a 100644
--- a/include/hw/intc/loongarch_extioi_common.h
+++ b/include/hw/intc/loongarch_extioi_common.h
@@ -94,6 +94,7 @@ struct LoongArchExtIOICommonClass {
SysBusDeviceClass parent_class;
DeviceRealize parent_realize;
+ ResettablePhases parent_phases;
int (*pre_save)(void *s);
int (*post_load)(void *s, int version_id);
};
--
2.43.5
- [PULL 0/8] loongarch-to-apply queue, Bibo Mao, 2025/05/05
- [PULL 3/8] hw/intc/loongarch_extioi: Replace legacy reset callback with new api, Bibo Mao, 2025/05/05
- [PULL 7/8] hw/loongarch/virt: Replace RSDT with XSDT table, Bibo Mao, 2025/05/05
- [PULL 5/8] hw/intc/loongarch_pch: Replace legacy reset callback with new api, Bibo Mao, 2025/05/05
- [PULL 2/8] hw/intc/loongarch_extioi: Add reset support,
Bibo Mao <=
- [PULL 6/8] hw/loongarch/virt: Get physical entry address with elf file, Bibo Mao, 2025/05/05
- [PULL 4/8] hw/intc/loongarch_pch: Add reset support, Bibo Mao, 2025/05/05
- [PULL 8/8] hw/loongarch/virt: Allow user to customize OEM ID and OEM table ID, Bibo Mao, 2025/05/05
- [PULL 1/8] hw/intc/loongarch_ipi: Add reset support, Bibo Mao, 2025/05/05
- Re: [PULL 0/8] loongarch-to-apply queue, Stefan Hajnoczi, 2025/05/07