|
| From: | Daniel Henrique Barboza |
| Subject: | Re: [PATCH v3] target/ppc: Implement new wait variants |
| Date: | Thu, 28 Jul 2022 10:27:06 -0300 |
| User-agent: | Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101 Thunderbird/91.10.0 |
On 7/28/22 02:29, Joel Stanley wrote:
On Wed, 27 Jul 2022 at 13:49, Daniel Henrique Barboza <danielhb413@gmail.com> wrote:On 7/20/22 10:33, Nicholas Piggin wrote:ISA v2.06 adds new variations of wait, specified by the WC field. These are not all compatible with the prior wait implementation, because they add additional conditions that cause the processor to resume, which can cause software to hang or run very slowly.So I suppose this is not a new feature, but a bug fix to remediate these hangs cause by the incompatibility of the WC field with other ISA versions. Is that right?That's the case. Nick has some kernel patches that make Linux use the new opcode: https://lore.kernel.org/all/20220720132132.903462-1-npiggin@gmail.com/ With these applied the kernel hangs during boot if more than one CPU is present. I was able to reproduce with ppc64le_defconfig and this command line: qemu-system-ppc64 -M pseries,x-vof=on -cpu POWER10 -smp 2 -nographic -kernel zImage.pseries -no-reboot Qemu will exit (as there's no filesystem) if the test "passes", or hang during boot if it hits the bug.
Thanks for the explanation. I'll handle it as a bug fix then. Also, Nick, down below:
There's a kernel here with the patches applied in case someone else wants to test: https://ozlabs.org/~joel/zImage.pseries-v5.19-rc8-wait-v3 Tested-by: Joel Stanley <joel@jms.id.au> Because of the hang it would be best if we merged the patch as a fix sooner rather than later. Cheers, JoelI'm explicitly asking for it because if it's a bug fix it's ok to pick it during the freeze. Especially here, given that what you're doing is mostly adding no-ops for conditions that we're not covering.ISA v3.0 changed the wait opcode and removed the new variants (retaining the WC field but making non-zero values reserved). ISA v3.1 added new WC values to the new wait opcode, and added a PL field. This implements the new wait encoding and supports WC variants with no-op implementations, which provides basic correctness as explained in comments. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> --- v3: - Add EXTRACT_HELPERs - Reserved fields should be ignored, not trap. - v3.1 defines special case of reserved PL values being treated as a no-op when WC=2. - Change code organization to (hopefully) be easier to follow each ISA / variation. - Tested old wait variant with Linux e6500 boot and verify that gen_wait is called and takes the expected path. Thanks, Nick target/ppc/internal.h | 3 ++ target/ppc/translate.c | 96 ++++++++++++++++++++++++++++++++++++++---- 2 files changed, 91 insertions(+), 8 deletions(-) diff --git a/target/ppc/internal.h b/target/ppc/internal.h index 2add128cd1..57c0a42a6b 100644 --- a/target/ppc/internal.h +++ b/target/ppc/internal.h @@ -168,6 +168,9 @@ EXTRACT_HELPER_SPLIT_3(DX, 10, 6, 6, 5, 16, 1, 1, 0, 0) /* darn */ EXTRACT_HELPER(L, 16, 2); #endif +/* wait */ +EXTRACT_HELPER(WC, 21, 2); +EXTRACT_HELPER(PL, 16, 2); /*** Jump target decoding ***/ /* Immediate address */ diff --git a/target/ppc/translate.c b/target/ppc/translate.c index 1d6daa4608..e0a835ac90 100644 --- a/target/ppc/translate.c +++ b/target/ppc/translate.c @@ -4066,12 +4066,91 @@ static void gen_sync(DisasContext *ctx) /* wait */ static void gen_wait(DisasContext *ctx) { - TCGv_i32 t0 = tcg_const_i32(1); - tcg_gen_st_i32(t0, cpu_env, - -offsetof(PowerPCCPU, env) + offsetof(CPUState, halted)); - tcg_temp_free_i32(t0); - /* Stop translation, as the CPU is supposed to sleep from now */ - gen_exception_nip(ctx, EXCP_HLT, ctx->base.pc_next); + uint32_t wc; + + if (ctx->insns_flags & PPC_WAIT) { + /* v2.03-v2.07 define an older incompatible 'wait' encoding. */ + + if (ctx->insns_flags2 & PPC2_PM_ISA206) { + /* v2.06 introduced the WC field. WC > 0 may be treated as no-op. */ + wc = WC(ctx->opcode); + } else { + wc = 0; + } + + } else if (ctx->insns_flags2 & PPC2_ISA300) { + /* v3.0 defines a new 'wait' encoding. */ + wc = WC(ctx->opcode);The ISA seems to indicate that WC=3 is always reserved in both ISA300 and ISA310. I believe you can check for WC=3 and gen_invalid() return right off the bat at this point.
I had a change of heart about this comment. It's better to have each ISA version handle their conditions in separate, even if they overlap, to make it easier to extend the function later on if required. This means that the patch LGTM, so Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Thanks, Daniel+ if (ctx->insns_flags2 & PPC2_ISA310) { + uint32_t pl = PL(ctx->opcode); + + /* WC 1,2 may be treated as no-op. WC 3 is reserved. */ + if (wc == 3) { + gen_invalid(ctx); + return; + } + + /* PL 1-3 are reserved. If WC=2 then the insn is treated as noop. */ + if (pl > 0 && wc != 2) { + gen_invalid(ctx); + return; + } + + } else { /* ISA300 */ + /* WC 1-3 are reserved */ + if (wc > 0) { + gen_invalid(ctx); + return; + } + } + + } else { + warn_report("wait instruction decoded with wrong ISA flags."); + gen_invalid(ctx); + return; + } + + /* + * wait without WC field or with WC=0 waits for an exception / interrupt + * to occur. + */ + if (wc == 0) { + TCGv_i32 t0 = tcg_const_i32(1); + tcg_gen_st_i32(t0, cpu_env, + -offsetof(PowerPCCPU, env) + offsetof(CPUState, halted)); + tcg_temp_free_i32(t0); + /* Stop translation, as the CPU is supposed to sleep from now */ + gen_exception_nip(ctx, EXCP_HLT, ctx->base.pc_next); + } + + /* + * Other wait types must not just wait until an exception occurs because + * ignoring their other wake-up conditions could cause a hang. + * + * For v2.06 and 2.07, wc=1,2,3 are architected but may be implemented as + * no-ops. + * + * wc=1 and wc=3 explicitly allow the instruction to be treated as a no-op. + * + * wc=2 waits for an implementation-specific condition, such could be + * always true, so it can be implemented as a no-op. + * + * For v3.1, wc=1,2 are architected but may be implemented as no-ops. + * + * wc=1 (waitrsv) waits for an exception or a reservation to be lost. + * Reservation-loss may have implementation-specific conditions, so it + * can be implemented as a no-op. + * + * wc=2 waits for an exception or an amount of time to pass. This + * amount is implementation-specific so it can be implemented as a + * no-op. + * + * ISA v3.1 allows for execution to resume "in the rare case of + * an implementation-dependent event", so in any case software must + * not depend on the architected resumption condition to become + * true, so no-op implementations should be architecturally correct + * (if suboptimal). + */ } #if defined(TARGET_PPC64) @@ -6852,8 +6931,9 @@ GEN_HANDLER2(stdcx_, "stdcx.", 0x1F, 0x16, 0x06, 0x00000000, PPC_64B), GEN_HANDLER_E(stqcx_, 0x1F, 0x16, 0x05, 0, PPC_NONE, PPC2_LSQ_ISA207), #endif GEN_HANDLER(sync, 0x1F, 0x16, 0x12, 0x039FF801, PPC_MEM_SYNC), -GEN_HANDLER(wait, 0x1F, 0x1E, 0x01, 0x03FFF801, PPC_WAIT), -GEN_HANDLER_E(wait, 0x1F, 0x1E, 0x00, 0x039FF801, PPC_NONE, PPC2_ISA300), +/* ISA v3.0 changed the extended opcode from 62 to 30 */ +GEN_HANDLER(wait, 0x1F, 0x1E, 0x01, 0x039FF801, PPC_WAIT), +GEN_HANDLER_E(wait, 0x1F, 0x1E, 0x00, 0x039CF801, PPC_NONE, PPC2_ISA300), GEN_HANDLER(b, 0x12, 0xFF, 0xFF, 0x00000000, PPC_FLOW), GEN_HANDLER(bc, 0x10, 0xFF, 0xFF, 0x00000000, PPC_FLOW), GEN_HANDLER(bcctr, 0x13, 0x10, 0x10, 0x00000000, PPC_FLOW),
| [Prev in Thread] | Current Thread | [Next in Thread] |