[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 7/7] tcg/ppc: Use prefixed instructions for tcg_out_goto_tb
From: |
Jordan Niethe |
Subject: |
Re: [PATCH 7/7] tcg/ppc: Use prefixed instructions for tcg_out_goto_tb |
Date: |
Mon, 7 Aug 2023 14:08:15 +1000 |
On Sat, Aug 5, 2023 at 7:34 AM Richard Henderson
<richard.henderson@linaro.org> wrote:
>
> When a direct branch is out of range, we can load the destination for
> the indirect branch using PLA (for 16GB worth of buffer) and PLD from
> the TranslationBlock for everything larger.
>
> This means the patch affects exactly one instruction: B (plus filler),
> PLA or PLD. Which means we can update and execute the patch atomically.
>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> ---
> tcg/ppc/tcg-target.c.inc | 76 ++++++++++++++++++++++++++++++----------
> 1 file changed, 58 insertions(+), 18 deletions(-)
>
> diff --git a/tcg/ppc/tcg-target.c.inc b/tcg/ppc/tcg-target.c.inc
> index 5b243b2353..47c71bb5f2 100644
> --- a/tcg/ppc/tcg-target.c.inc
> +++ b/tcg/ppc/tcg-target.c.inc
> @@ -2642,31 +2642,41 @@ static void tcg_out_goto_tb(TCGContext *s, int which)
> uintptr_t ptr = get_jmp_target_addr(s, which);
>
> if (USE_REG_TB) {
> + /*
> + * With REG_TB, we must always use indirect branching,
> + * so that the branch destination and TCG_REG_TB match.
> + */
> ptrdiff_t offset = tcg_tbrel_diff(s, (void *)ptr);
> tcg_out_mem_long(s, LD, LDX, TCG_REG_TB, TCG_REG_TB, offset);
> -
> - /* TODO: Use direct branches when possible. */
> - set_jmp_insn_offset(s, which);
> tcg_out32(s, MTSPR | RS(TCG_REG_TB) | CTR);
> -
> tcg_out32(s, BCCTR | BO_ALWAYS);
>
> /* For the unlinked case, need to reset TCG_REG_TB. */
> set_jmp_reset_offset(s, which);
> tcg_out_mem_long(s, ADDI, ADD, TCG_REG_TB, TCG_REG_TB,
> -tcg_current_code_size(s));
> + return;
> + }
> +
> + if (have_isa_3_10) {
> + /* Align, so that we can patch 8 bytes atomically. */
> + if ((uintptr_t)s->code_ptr & 7) {
> + tcg_out32(s, NOP);
> + }
> + set_jmp_insn_offset(s, which);
> + /* Direct branch will be patched by tb_target_set_jmp_target. */
> + tcg_out_mls_d(s, ADDI, TCG_REG_TMP1, 0, 0, 1);
> } else {
> /* Direct branch will be patched by tb_target_set_jmp_target. */
> - set_jmp_insn_offset(s, which);
It looks like 32bit loses its set_jmp_insn_offset(), is that intended?
> - tcg_out32(s, NOP);
> -
> + tcg_out32(s, B);
> /* When branch is out of range, fall through to indirect. */
> tcg_out_movi(s, TCG_TYPE_PTR, TCG_REG_TMP1, ptr - (int16_t)ptr);
> tcg_out_ld(s, TCG_TYPE_PTR, TCG_REG_TMP1, TCG_REG_TMP1,
> (int16_t)ptr);
> - tcg_out32(s, MTSPR | RS(TCG_REG_TMP1) | CTR);
> - tcg_out32(s, BCCTR | BO_ALWAYS);
> - set_jmp_reset_offset(s, which);
> }
> +
> + tcg_out32(s, MTSPR | RS(TCG_REG_TMP1) | CTR);
> + tcg_out32(s, BCCTR | BO_ALWAYS);
> + set_jmp_reset_offset(s, which);
> }
>
> void tb_target_set_jmp_target(const TranslationBlock *tb, int n,
> @@ -2674,20 +2684,50 @@ void tb_target_set_jmp_target(const TranslationBlock
> *tb, int n,
> {
> uintptr_t addr = tb->jmp_target_addr[n];
> intptr_t diff = addr - jmp_rx;
> - tcg_insn_unit insn;
>
> if (USE_REG_TB) {
> return;
> }
>
> - if (in_range_b(diff)) {
> - insn = B | (diff & 0x3fffffc);
> - } else {
> - insn = NOP;
> - }
> + if (have_isa_3_10) {
> + tcg_insn_unit insn1, insn2;
> + uint64_t pair;
>
> - qatomic_set((uint32_t *)jmp_rw, insn);
> - flush_idcache_range(jmp_rx, jmp_rw, 4);
> + if (in_range_b(diff)) {
> + insn1 = B | (diff & 0x3fffffc);
> + insn2 = NOP;
> + } else if (diff == sextract64(diff, 0, 34)) {
> + /* PLA tmp1, diff */
> + insn1 = OPCD(1) | (2 << 24) | (1 << 20) | ((diff >> 16) &
> 0x3ffff);
> + insn2 = ADDI | TAI(TCG_REG_TMP1, 0, diff);
> + } else {
> + addr = (uintptr_t)&tb->jmp_target_addr[n];
> + diff = addr - jmp_rx;
> + tcg_debug_assert(diff == sextract64(diff, 0, 34));
> + /* PLD tmp1, diff */
> + insn1 = OPCD(1) | (1 << 20) | ((diff >> 16) & 0x3ffff);
> + insn2 = PLD | TAI(TCG_REG_TMP1, 0, diff);
> + }
> +
> + if (HOST_BIG_ENDIAN) {
> + pair = ((uint64_t)insn1) << 32 | insn2;
> + } else {
> + pair = ((uint64_t)insn2) << 32 | insn1;
> + }
> +
> + qatomic_set((uint64_t *)jmp_rw, pair);
> + flush_idcache_range(jmp_rx, jmp_rw, 8);
> + } else {
> + tcg_insn_unit insn;
> +
> + if (in_range_b(diff)) {
> + insn = B | (diff & 0x3fffffc);
> + } else {
> + insn = NOP;
> + }
> + qatomic_set((uint32_t *)jmp_rw, insn);
> + flush_idcache_range(jmp_rx, jmp_rw, 4);
> + }
> }
>
> static void tcg_out_op(TCGContext *s, TCGOpcode opc,
> --
> 2.34.1
>
- [PATCH 4/7] tcg/ppc: Use PLD in tcg_out_movi for constant pool, (continued)
- Re: [PATCH 7/7] tcg/ppc: Use prefixed instructions for tcg_out_goto_tb,
Jordan Niethe <=
[PATCH 5/7] tcg/ppc: Use prefixed instructions in tcg_out_dupi_vec, Richard Henderson, 2023/08/04
Re: [PATCH for-8.2 0/7] tcg/ppc: Support power10 prefixed instructions, Nicholas Piggin, 2023/08/06