Re: [qemu-s390x] linux-user: s390x issue on Fedora 30 (dynamic library loader?)

[Laurent Vivier]

Le 17/08/2019 à 18:51, David Hildenbrand a écrit :
> On 17.08.19 18:22, Laurent Vivier wrote:
>> Le 17/08/2019 à 18:14, David Hildenbrand a écrit :
>>> On 17.08.19 17:59, David Hildenbrand wrote:
>>>> Hi everybody,
>>>>
>>>> I was just trying to run qemu-s390x (linux-user) with a very simple
>>>> binary (gzip + lib/ld64.so.1, compiled under Fedora 27). This used to
>>>> work just fine a while ago (especially when I was working on vector
>>>> instructions using QEMU v3.1). However, now I can't get past a SEGFAULT
>>>> in the dynamic library loader (I assume it is trying to locate glibc). I
>>>> tried a couple of other binaries that definitely used to work (from
>>>> Fedora 30).
>>>>
>>>> I checked QEMU v4.1, v4.0 and v3.1. All are broken for me. Which is
>>>> weird - because it used to work :/
>>>>
>>>> I remember that I was running Fedora 29 the last time I had it running,
>>>> so my gut feeling is that this is related to some other system library
>>>> (but which?). I am running on an up-to-date Fedora 30 x86-64 now.
>>>>
>>>> Any ideas? Has this been reported already? (not sure if this is a Fedora
>>>> 30 issue)
>>>>
>>>> LANG=C ~/git/qemu/s390x-linux-user/qemu-s390x -d in_asm -L . gzip --help
>>>>
>>>> ----------------
>>>> IN: _dl_load_cache_lookup
>>>> 0x00000040008854c2:  larl       %r1,0x4000895030
>>>> 0x00000040008854c8:  lg %r8,264(%r11)
>>>> 0x00000040008854ce:  mvghi      0(%r1),-1
>>>> 0x00000040008854d4:  la %r3,0(%r3,%r8)
>>>> 0x00000040008854d8:  l  %r7,12(%r8)
>>>> 0x00000040008854dc:  llgfr      %r2,%r7
>>>> 0x00000040008854e0:  sllg       %r1,%r2,1
>>>> 0x00000040008854e6:  agr        %r1,%r2
>>>> 0x00000040008854ea:  sllg       %r1,%r1,2
>>>> 0x00000040008854f0:  la %r6,16(%r1,%r8)
>>>> 0x00000040008854f4:  sgr        %r3,%r6
>>>> 0x00000040008854f8:  stg        %r3,256(%r11)
>>>> 0x00000040008854fe:  ahi        %r7,-1
>>>> 0x0000004000885502:  jl 0x40008850f0
>>>>
>>>> ----------------
>>>> IN: _dl_load_cache_lookup
>>>> 0x0000004000885506:  srak       %r10,%r7,1
>>>> 0x000000400088550c:  lgfr       %r2,%r10
>>>> 0x0000004000885510:  sllg       %r1,%r2,1
>>>> 0x0000004000885516:  agr        %r1,%r2
>>>> 0x000000400088551a:  sllg       %r1,%r1,2
>>>> 0x0000004000885520:  l  %r1,20(%r1,%r8)
>>>> 0x0000004000885524:  clrjhe     %r1,%r3,0x40008850f0
>>>>
>>>> Segmentation fault (Speicherabzug geschrieben)
>>>>
>>>>
>>>> Core was generated by
>>>> `/home/dhildenb/git/qemu/s390x-linux-user/qemu-s390x -d in_asm -L . gzip
>>>> --help'.
>>>> Program terminated with signal SIGSEGV, Segmentation fault.
>>>> #0  0x00007fdc5d7c3232 in sigsuspend () from /lib64/libc.so.6
>>>> [Current thread is 1 (Thread 0x7fdc5d7127c0 (LWP 31072))]
>>>> Missing separate debuginfos, use: dnf debuginfo-install
>>>> glib2-2.60.6-1.fc30.x86_64 glibc-2.29-15.fc30.x86_64
>>>> libgcc-9.1.1-1.fc30.x86_64 libstdc++-9.1.1-1.fc30.x86_64
>>>> pcre-8.43-2.fc30.x86_64 zlib-1.2.11-16.fc30.x86_64
>>>> (gdb) bt
>>>> #0  0x00007fdc5d7c3232 in sigsuspend () from /lib64/libc.so.6
>>>> #1  0x000055f826135a9c in dump_core_and_abort
>>>> (target_sig=target_sig@entry=11)
>>>>     at /home/dhildenb/git/qemu/linux-user/signal.c:613
>>>> #2  0x000055f826135e37 in handle_pending_signal
>>>> (cpu_env=cpu_env@entry=0x55f8292cec48, sig=sig@entry=11,
>>>>     k=k@entry=0x55f8292d7df0) at
>>>> /home/dhildenb/git/qemu/linux-user/signal.c:877
>>>> #3  0x000055f826136edd in process_pending_signals
>>>> (cpu_env=cpu_env@entry=0x55f8292cec48)
>>>>     at /home/dhildenb/git/qemu/linux-user/signal.c:953
>>>> #4  0x000055f82613a13a in cpu_loop (env=0x55f8292cec48) at
>>>> /home/dhildenb/git/qemu/linux-user/s390x/cpu_loop.c:150
>>>> #5  0x000055f8260ce2ba in main (argc=<optimized out>,
>>>> argv=0x7fff587a69d8, envp=<optimized out>)
>>>>     at /home/dhildenb/git/qemu/linux-user/main.c:819
>>>>
>>>> Thanks!
>>>>
>>>
>>> CCing QEMU-devel + use my proper dev mail address (I need more coffee :))
>>>
>>
>> I generally test qemu-s390x before my PR. Last time, I have tested with
>> Fedora 30 x86_64 but my target are always debian.
> 
> What puzzles me is that it used to work just fine about 3-4 months ago.
> I still have the binaries/libs lying around that I used back then (when
> debugging a vector instruction-related issue). Whatever binary/QEMU
> version I try now, it keeps segfaulting.
> 
> Via qemu-system-s390x, inside a Fedora guest, the binaries work
> perfectly fine. So I really suspect that this has to do with my host system.
> 
>>
>> So I guess the problem is with the target.
>>
>> I will have a look on Monday.
> 

I'm not able to reproduce it. In a chroot or using "-L" with only
/bin/gzip, /lib64/ld64.so.1 and /lib/libc.so.6 in the directory.

My host is Fedora 30 (updated today) and the target directory is Fedora
30 too (from
https://download-ib01.fedoraproject.org/pub/fedora-secondary/releases/30/Container/s390x/images/Fedora-Container-Minimal-Base-30-1.2.s390x.tar.xz)

Do you have more details?

Thanks,
Laurent