[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v3 04/17] s390x: protvirt: Add diag308 subcodes 8 - 10
From: |
Janosch Frank |
Subject: |
Re: [PATCH v3 04/17] s390x: protvirt: Add diag308 subcodes 8 - 10 |
Date: |
Thu, 20 Feb 2020 12:06:46 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.2.2 |
On 2/20/20 11:07 AM, Cornelia Huck wrote:
> On Fri, 14 Feb 2020 10:16:23 -0500
> Janosch Frank <address@hidden> wrote:
>
>> For diag308 subcodes 8 - 10 we have a new ipib of type 5. The ipib
>> holds the address and length of the secure execution header, as well
>> as a list of guest components.
>>
>> Each component is a block of memory, for example kernel or initrd,
>> which needs to be decrypted by the Ultravisor in order to run a
>> protected VM. The secure execution header instructs the Ultravisor on
>> how to handle the protected VM and its components.
>>
>> Subcodes 8 and 9 are similiar to 5 and 6 and subcode 10 will finally
>> start the protected guest.
>>
>> Subcodes 8-10 are not valid in protected mode, we have to do a subcode
>> 3 and then the 8 and 10 combination for a protected reboot.
>>
>> Signed-off-by: Janosch Frank <address@hidden>
>> ---
>> hw/s390x/ipl.c | 48 ++++++++++++++++++++++++++++++++++++++++++---
>> hw/s390x/ipl.h | 31 +++++++++++++++++++++++++++++
>> target/s390x/diag.c | 27 ++++++++++++++++++++++---
>> 3 files changed, 100 insertions(+), 6 deletions(-)
>
> (...)
>
>> void s390_ipl_update_diag308(IplParameterBlock *iplb)
>> {
>> S390IPLState *ipl = get_ipl_device();
>>
>> - ipl->iplb = *iplb;
>> - ipl->iplb_valid = true;
>> + if (iplb->pbt == 5) {
>
> Magic value; maybe introduce a #define or at least a comment?
Well, there is already one defined, but it seems I never came around to
use it -_-
>
>> + ipl->iplb_pbt5 = *iplb;
>> + ipl->iplb_valid_pbt5 = true;
>> + } else {
>> + ipl->iplb = *iplb;
>> + ipl->iplb_valid = true;
>> + }
>> ipl->netboot = is_virtio_net_device(iplb);
>> }
>
>> @@ -133,6 +154,7 @@ struct S390IPLState {
>> /*< private >*/
>> DeviceState parent_obj;
>> IplParameterBlock iplb;
>> + IplParameterBlock iplb_pbt5;
>
> Add /* for protected virtualization */ ?
>
> Or, if this is not used for anything else, call it iplb_pv?
ack.
>
>> QemuIplParameters qipl;
>> uint64_t start_addr;
>> uint64_t compat_start_addr;
>
> (...)
>
>> diff --git a/target/s390x/diag.c b/target/s390x/diag.c
>> index b5aec06d6b..4ba6033609 100644
>> --- a/target/s390x/diag.c
>> +++ b/target/s390x/diag.c
>> @@ -52,6 +52,8 @@ int handle_diag_288(CPUS390XState *env, uint64_t r1,
>> uint64_t r3)
>> #define DIAG_308_RC_OK 0x0001
>> #define DIAG_308_RC_NO_CONF 0x0102
>> #define DIAG_308_RC_INVALID 0x0402
>> +#define DIAG_308_RC_NO_PV_CONF 0x0a02
>> +#define DIAG_308_RC_INV_FOR_PV 0x0b02
>
> DIAG_308_RC_INVAL_FOR_PV ?
ack
>
>>
>> #define DIAG308_RESET_MOD_CLR 0
>> #define DIAG308_RESET_LOAD_NORM 1
>
> (...)
>
>> @@ -128,17 +135,31 @@ out:
>> g_free(iplb);
>> return;
>> case DIAG308_STORE:
>> + case DIAG308_PV_STORE:
>> if (diag308_parm_check(env, r1, addr, ra, true)) {
>> return;
>> }
>> - iplb = s390_ipl_get_iplb();
>> + if (subcode == DIAG308_PV_STORE) {
>> + iplb = s390_ipl_get_iplb_secure();
>> + } else {
>> + iplb = s390_ipl_get_iplb();
>> + }
>
> iplb = (subcode == DIAG308_PV_STORE) ?
> s390_ipl_get_iplb_secure() : s390_ipl_get_iplb();
>
> Matter of taste, I guess.
I'll have a look what I find nicer to read
>
>> if (iplb) {
>> cpu_physical_memory_write(addr, iplb, be32_to_cpu(iplb->len));
>> env->regs[r1 + 1] = DIAG_308_RC_OK;
>> } else {
>> env->regs[r1 + 1] = DIAG_308_RC_NO_CONF;
>> }
>> - return;
>> + break;
>> + case DIAG308_PV_START:
>> + iplb = s390_ipl_get_iplb_secure();
>> + if (!iplb || !iplb_valid_pv(iplb)) {
>> + env->regs[r1 + 1] = DIAG_308_RC_NO_PV_CONF;
>> + return;
>> + }
>> +
>> + s390_ipl_reset_request(cs, S390_RESET_PV);
>> + break;
>> default:
>> s390_program_interrupt(env, PGM_SPECIFICATION, ra);
>> break;
>
signature.asc
Description: OpenPGP digital signature
- [PATCH v3 00/17] s390x: Protected Virtualization support, Janosch Frank, 2020/02/14
- [PATCH v3 03/17] Sync pv, Janosch Frank, 2020/02/14
- [PATCH v3 02/17] s390x: Add missing vcpu reset functions, Janosch Frank, 2020/02/14
- [PATCH v3 01/17] Header sync, Janosch Frank, 2020/02/14
- [PATCH v3 04/17] s390x: protvirt: Add diag308 subcodes 8 - 10, Janosch Frank, 2020/02/14
- [PATCH v3 08/17] s390x: protvirt: KVM intercept changes, Janosch Frank, 2020/02/14
- [PATCH v3 05/17] s390x: protvirt: Support unpack facility, Janosch Frank, 2020/02/14
- [PATCH v3 07/17] s390x: protvirt: Handle diag 308 subcodes 0,1,3,4, Janosch Frank, 2020/02/14
- [PATCH v3 06/17] s390x: protvirt: Add migration blocker, Janosch Frank, 2020/02/14