qemu-s390x
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v11 00/16] s390x: Protected Virtualization support


From: Cornelia Huck
Subject: Re: [PATCH v11 00/16] s390x: Protected Virtualization support
Date: Mon, 23 Mar 2020 18:13:56 +0100

On Thu, 19 Mar 2020 09:19:05 -0400
Janosch Frank <address@hidden> wrote:

> Most of the QEMU changes for PV are related to the new IPL type with
> subcodes 8 - 10 and the execution of the necessary Ultravisor calls to
> IPL secure guests. Note that we can only boot into secure mode from
> normal mode, i.e. stfle 161 is not active in secure mode.
> 
> The other changes related to data gathering for emulation and
> disabling addressing checks in secure mode, as well as CPU resets.
> 
> v11:
>       * Review fixes
> 
> v10:
>       * Moved documentation into subfolder
>       * Added huge page fencing
>       * Cleared up IO questions that were remaining
>       * Added exits/abbort/assert for conditions where we can't recover
> 
> v9:
>       * Moved pv.h into include/hw/s390x/
>       * Replaced cmd strings with macro
>       * Moved s390_is_pv() to pv.h
>       * Added new copyright dates and authors
> v8:
>       * Removed the iplb_valid changes as they are picked
>       * Checkpatch fixes
>       * Review fixes
>       * Replaced env/ms->pv with s390_is_pv()
> v7:
>       * Merged the diag 308 subcode patches and the unpack
>       * Moved the SIDA memops into the sync patch
>       * Bailout for the none machien and fencing of CONFIG_USER_ONLY
>       * Changes due to review
> 
> v6:
>       * diag308 rc numbers were changed by architecture
>       * IPL pv block received one more reserved field by architecture
>       * Officially added the bios patch to the series
>       * Dropped picked constant rename patch
> 
> v5:
>       * Moved docs into docs/system
>       * Some more enable/disable changes
>       * Moved enablement/disablement of pv in separate functions
>       * Some review fixes
> 
> v4:
>       * Sync with KVM changes
>       * Review changes
> 
> V3:
>       * Use dedicated functions to access SIDA
>       * Smaller cleanups and segfault fixes
>       * Error reporting for Ultravisor calls
>       * Inject of RC of diag308 subcode 10 fails
> 
> V2:
>       * Split out cleanups
>       * Internal PV state tracking
>       * Review feedback
> 
> Christian Borntraeger (1):
>   s390x: Add unpack facility feature to GA1
> 
> Janosch Frank (15):
>   s390x: Move diagnose 308 subcodes and rcs into ipl.h
>   Sync pv
>   s390x: protvirt: Support unpack facility
>   s390x: protvirt: Add migration blocker
>   s390x: protvirt: Inhibit balloon when switching to protected mode
>   s390x: protvirt: KVM intercept changes
>   s390x: Add SIDA memory ops
>   s390x: protvirt: Move STSI data over SIDAD
>   s390x: protvirt: SCLP interpretation
>   s390x: protvirt: Set guest IPL PSW
>   s390x: protvirt: Move diag 308 data over SIDA
>   s390x: protvirt: Disable address checks for PV guest IO emulation
>   s390x: protvirt: Move IO control structures over SIDA
>   s390x: protvirt: Handle SIGP store status correctly
>   docs: system: Add protvirt docs
> 
>  MAINTAINERS                         |   2 +
>  docs/system/s390x/protvirt.rst      |  60 +++++++++++
>  docs/system/target-s390x.rst        |   5 +
>  hw/s390x/Makefile.objs              |   1 +
>  hw/s390x/ipl.c                      |  59 ++++++++++-
>  hw/s390x/ipl.h                      | 102 ++++++++++++++++++-
>  hw/s390x/pv.c                       |  98 ++++++++++++++++++
>  hw/s390x/s390-virtio-ccw.c          | 148 +++++++++++++++++++++++++++-
>  hw/s390x/sclp.c                     |  56 ++++++++---
>  include/hw/s390x/pv.h               |  55 +++++++++++
>  include/hw/s390x/s390-virtio-ccw.h  |   1 +
>  include/hw/s390x/sclp.h             |   2 +
>  linux-headers/linux/kvm.h           |  45 ++++++++-
>  target/s390x/cpu.c                  |  27 +++--
>  target/s390x/cpu.h                  |   7 +-
>  target/s390x/cpu_features_def.inc.h |   1 +
>  target/s390x/diag.c                 |  77 +++++++++++----
>  target/s390x/gen-features.c         |   1 +
>  target/s390x/helper.c               |   6 ++
>  target/s390x/ioinst.c               |  96 +++++++++++++-----
>  target/s390x/kvm-stub.c             |   5 +
>  target/s390x/kvm.c                  |  79 +++++++++++++--
>  target/s390x/kvm_s390x.h            |   3 +
>  target/s390x/mmu_helper.c           |  14 +++
>  24 files changed, 870 insertions(+), 80 deletions(-)
>  create mode 100644 docs/system/s390x/protvirt.rst
>  create mode 100644 hw/s390x/pv.c
>  create mode 100644 include/hw/s390x/pv.h
> 

Thanks, queued to s390-next for 5.1 (with v12 of patch 3).

Patch 2 will obviously need to be replaced by a proper headers update;
I'll do that when 5.1 development opens up (I assume the kernel patches
will have reached Linux master before that.)

(Any further s390x patches for 5.0 will go via s390-fixes, as usual.)




reply via email to

[Prev in Thread] Current Thread [Next in Thread]