qemu-s390x
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v6 11/11] s390x: topology: documentation


From: Pierre Morel
Subject: [PATCH v6 11/11] s390x: topology: documentation
Date: Thu, 17 Feb 2022 14:41:25 +0100

The use of the S390x CPU topology is explain in a new documentation
file.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
---
 docs/system/s390x/numa-cpu-topology.rst | 273 ++++++++++++++++++++++++
 1 file changed, 273 insertions(+)
 create mode 100644 docs/system/s390x/numa-cpu-topology.rst

diff --git a/docs/system/s390x/numa-cpu-topology.rst 
b/docs/system/s390x/numa-cpu-topology.rst
new file mode 100644
index 0000000000..9ae15f792f
--- /dev/null
+++ b/docs/system/s390x/numa-cpu-topology.rst
@@ -0,0 +1,273 @@
+NUMA CPU Topology on S390x
+==========================
+
+IBM S390 provides a complex CPU architecture with several cache levels.
+Using NUMA with the CPU topology is a way to let the guest optimize his
+accesses to the main memory.
+
+The QEMU smp parameter for S390x allows to specify 4 NUMA levels:
+core, socket, drawer and book and these levels are available for
+the numa parameter too.
+
+
+Prerequisites
+-------------
+
+To take advantage of the CPU topology, KVM must give support for the
+Perform Topology Function and to the Store System Information instructions
+as indicated by the Perform CPU Topology facility (stfle bit 11).
+
+If those requirements are met, the capability ``KVM_CAP_S390_CPU_TOPOLOGY``
+will indicate that KVM can support CPU Topology on that LPAR.
+
+
+Using CPU Topology in QEMU for S390x
+------------------------------------
+
+
+QEMU -smp parameter
+~~~~~~~~~~~~~~~~~~~
+
+With -smp QEMU provides the user with the possibility to define
+a Topology based on ::
+
+  -smp [[cpus=]n][,maxcpus=maxcpus][,drawers=drawers][,books=books] \
+       [,sockets=sockets][,cores=cores]
+
+The topology reported to the guest in this situation will provide
+n cpus of a maximum of maxcpus cpus, filling the topology levels one by one
+starting with CPU0 being the first CPU on drawer[0] book[0] socket[0].
+
+For example ``-smp 5,books=2,sockets=2,cores=2`` will provide ::
+
+  drawer[0]--+--book[0]--+--socket[0]--+--core[0]-CPU0
+             |           |             |
+             |           |             +--core[1]-CPU1
+             |           |
+             |           +--socket[1]--+--core[0]-CPU2
+             |                         |
+             |                         +--core[1]-CPU3
+             |
+             +--book[1]--+--socket[0]--+--core[0]-CPU4
+
+
+Note that the thread parameter can not be defined on S390 as it
+has no representation on the CPU topology.
+
+
+QEMU -numa parameter
+~~~~~~~~~~~~~~~~~~~
+
+With -numa QEMU provides the user with the possibility to define
+the Topology in a non uniform way ::
+
+  -smp [[cpus=]n][,maxcpus=maxcpus][,drawers=drawers][,books=books] \
+       [,sockets=sockets][,cores=cores]
+  -numa 
node[,memdev=id][,cpus=firstcpu[-lastcpu]][,nodeid=node][,initiator=initiator]
+  -numa cpu,node-id=node[,drawer-id=x][,book-id=x][,socket-id=x][,core-id=y]
+
+The topology reported to the guest in this situation will provide
+n cpus of a maximum of maxcpus cpus, and the topology entries will be
+
+- if there is less cpus than specified by the -numa arguments
+  the topology will be build by filling the numa definitions
+  starting with the lowest node.
+
+- if there is more cpus than specified by the -numa argument
+  the numa specification will first be fulfilled and the remaining
+  CPU will be assigned to unassigned slots starting with the
+  core 0 on socket 0.
+
+- a CPU declared with -device does not count inside the ncpus parameter
+  of the -smp argument and will be added on the topology based on
+  its core ID.
+
+For example  ::
+
+  -smp 3,drawers=8,books=2,sockets=2,cores=2,maxcpus=64
+  -object memory-backend-ram,id=mem0,size=10G
+  -numa node,nodeid=0,memdev=mem0
+  -numa node,nodeid=1
+  -numa node,nodeid=2
+  -numa cpu,node-id=0,drawer-id=0
+  -numa cpu,node-id=1,socket-id=9
+  -device host-s390x-cpu,core-id=19
+
+Will provide the following topology ::
+
+  drawer[0]--+--book[0]--+--socket[0]--+--core[0]-CPU0
+                         |             |
+                         |             +--core[1]-CPU1
+                         |
+                         +--socket[1]--+--core[0]-CPU2
+
+  drawer[2]--+--book[0]--+--socket[1]--+--core[1]-CPU19
+
+
+S390 NUMA specificity
+---------------------
+
+Heterogene Memory Attributes
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The S390 topology implementation does not use ACPI HMAT to specify the
+cache size and bandwidth between nodes.
+
+Memory device
+~~~~~~~~~~~~~
+
+When using NUMA S390 needs a memory device to be associated with
+the nodes definitions. As we do not use HMAT, it has little sense
+to assign memory to each node and one should assign all memory to
+a node without CPU and use other nodes to define the CPU Topology.
+
+Exemple ::
+
+  -object memory-backend-ram,id=mem0,size=10G
+  -numa node,nodeid=0,memdev=mem0
+
+
+CPUs
+~~~~
+
+In the S390 topology we do not use threads and the first topology
+level is the core.
+The number of threads can no be defined for S390 and is always equal to 1.
+
+When using NUMA, QEMU issues a warning for CPUS not assigned to nodes.
+The S390 topology will silently assign unassigned CPUs to the topology
+searching for free core starting on the first core of the first socket
+in the first book.
+This is of course advised to assign all possible CPUs to nodes to
+guaranty future compatibility.
+
+
+The topology provided to the guest
+----------------------------------
+
+The guest , when the CPU Topology is available as indicated by the
+Perform CPU Topology facility (stfle bit 11) may use two instructions
+to retrieve the CPU topology and optimize its CPU scheduling:
+
+- PTF (Perform Topology function) which will give information
+  about a change in the CPU Topology, that is a change in the
+  result of the STSI(15,1,2) instruction.
+
+- STSI (Stote System Information) with parameters (15,1,2)
+  to retrieve the CPU Topology.
+
+Exemple ::
+
+  -smp 3,drawers=8,books=2,sockets=2,cores=2,maxcpus=64
+  -object memory-backend-ram,id=mem0,size=10G
+  -numa node,nodeid=0,memdev=mem0
+  -numa node,nodeid=1
+  -numa node,nodeid=2
+  -numa cpu,node-id=1,drawer-id=0
+  -numa cpu,node-id=2,socket-id=9
+  -device host-s390x-cpu,core-id=19
+
+Formated result for STSI(15,1,2) showing the 6 different levels
+with:
+- levels 2 (socket) and 1 (core) used.
+- 3 sockets with a CPU mask for CPU type 3, non dedicated and
+  with horizontal polarization.
+- The first socket contains 2 cores as specified by the -smp argument
+- The second socket contains the 3rd core defined by the -smp argument
+- both these sockets belong to drawer-id=0 and to node-1
+- The third socket hold the CPU with core-id 19 assigned to socket-id 9
+  and to node-2
+
+Here the kernel view ::
+
+  mag[6] = 0
+  mag[5] = 0
+  mag[4] = 0
+  mag[3] = 0
+  mag[2] = 32
+  mag[1] = 2
+  MNest  = 2
+  socket: 1 0
+  cpu type 03  d: 0 pp: 0
+  origin : 0000
+  mask   : c000000000000000
+
+  socket: 1 1
+  cpu type 03  d: 0 pp: 0
+  origin : 0000
+  mask   : 2000000000000000
+
+  socket: 1 9
+  cpu type 03  d: 0 pp: 0
+  origin : 0000
+  mask   : 0000100000000000
+
+And the admin view ::
+
+  # lscpu -e
+  CPU NODE DRAWER BOOK SOCKET CORE L1d:L1i:L2d:L2i ONLINE CONFIGURED 
POLARIZATION ADDRESS
+  0   0    0      0    0      0    0:0:0:0         yes    yes        
horizontal   0
+  1   0    0      0    0      1    1:1:1:1         yes    yes        
horizontal   1
+  2   0    0      0    1      2    2:2:2:2         yes    yes        
horizontal   2
+  3   0    1      1    2      3    3:3:3:3         yes    yes        
horizontal   19
+
+
+Hotplug with NUMA
+-----------------
+
+Using the core-id the topology is automatically calculated to put the core
+inside the right socket.
+
+Example::
+
+  (qemu) device_add host-s390x-cpu,core-id=8
+
+  # lscpu -e
+  CPU NODE DRAWER BOOK SOCKET CORE L1d:L1i:L2d:L2i ONLINE CONFIGURED 
POLARIZATION ADDRESS
+  0   0    0      0    0      0    0:0:0:0         yes    yes        
horizontal   0
+  1   0    0      0    0      1    1:1:1:1         yes    yes        
horizontal   1
+  2   0    0      0    1      2    2:2:2:2         yes    yes        
horizontal   2
+  3   0    1      1    2      3    3:3:3:3         yes    yes        
horizontal   19
+  4   -    -      -    -      -    :::             no     yes        
horizontal   8
+
+  # chcpu -e 4
+  CPU 4 enabled
+  # lscpu -e
+  CPU NODE DRAWER BOOK SOCKET CORE L1d:L1i:L2d:L2i ONLINE CONFIGURED 
POLARIZATION ADDRESS
+  0   0    0      0    0      0    0:0:0:0         yes    yes        
horizontal   0
+  1   0    0      0    0      1    1:1:1:1         yes    yes        
horizontal   1
+  2   0    0      0    1      2    2:2:2:2         yes    yes        
horizontal   2
+  3   0    1      1    2      3    3:3:3:3         yes    yes        
horizontal   19
+  4   0    2      2    3      4    4:4:4:4         yes    yes        
horizontal   8
+
+One can see that the userland tool reports serials IDs which do not correspond
+to the firmware IDs but does however report the new CPU on it's own socket.
+
+The result seen by the kernel looks like ::
+
+  mag[6] = 0
+  mag[5] = 0
+  mag[4] = 0
+  mag[3] = 0
+  mag[2] = 32
+  mag[1] = 2
+  MNest  = 2
+  00 - socket: 1 0
+  cpu type 03  d: 0 pp: 0
+  origin : 0000
+  mask   : c000000000000000
+
+  socket: 1 1
+  cpu type 03  d: 0 pp: 0
+  origin : 0000
+  mask   : 2000000000000000
+
+  socket: 1 9
+  cpu type 03  d: 0 pp: 0
+  origin : 0000
+  mask   : 0000100000000000
+
+  socket: 1 4
+  cpu type 03  d: 0 pp: 0
+  origin : 0000
+  mask   : 0080000000000000
-- 
2.27.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]