qemu-trivial
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-trivial] [PATCH v6 07/13] sm501: Fix device endianness


From: BALATON Zoltan
Subject: [Qemu-trivial] [PATCH v6 07/13] sm501: Fix device endianness
Date: Fri, 21 Apr 2017 12:31:07 +0200

We only emulate the sysbus device in its default LE mode and PCI is LE
as well so specify this for registers and framebuffer memory.

Note that though the Linux kernel driver has code which claims to
handle both big and little endian, it is obviously bogus for 16 bit
and cannot be trusted as a source of information on the framebuffer
pixel format. This is our best guess about device behaviour based on
the specs and testing with MorphOS that is known to work on real HW.

Signed-off-by: BALATON Zoltan <address@hidden>
Reviewed-by: Peter Maydell <address@hidden>
---

v2: Split off small clean up to other patch
v4: Set serial part to little endian as well
v5: Make framebuffer always LE as suggested by Peter Maydell
v6: Extended commit message

 hw/display/sm501.c          |  8 ++++----
 hw/display/sm501_template.h | 19 ++++++-------------
 2 files changed, 10 insertions(+), 17 deletions(-)

diff --git a/hw/display/sm501.c b/hw/display/sm501.c
index c92a5fa..a628ef1 100644
--- a/hw/display/sm501.c
+++ b/hw/display/sm501.c
@@ -850,7 +850,7 @@ static const MemoryRegionOps sm501_system_config_ops = {
         .min_access_size = 4,
         .max_access_size = 4,
     },
-    .endianness = DEVICE_NATIVE_ENDIAN,
+    .endianness = DEVICE_LITTLE_ENDIAN,
 };
 
 static uint32_t sm501_palette_read(void *opaque, hwaddr addr)
@@ -1086,7 +1086,7 @@ static const MemoryRegionOps sm501_disp_ctrl_ops = {
         .min_access_size = 4,
         .max_access_size = 4,
     },
-    .endianness = DEVICE_NATIVE_ENDIAN,
+    .endianness = DEVICE_LITTLE_ENDIAN,
 };
 
 static uint64_t sm501_2d_engine_read(void *opaque, hwaddr addr,
@@ -1174,7 +1174,7 @@ static const MemoryRegionOps sm501_2d_engine_ops = {
         .min_access_size = 4,
         .max_access_size = 4,
     },
-    .endianness = DEVICE_NATIVE_ENDIAN,
+    .endianness = DEVICE_LITTLE_ENDIAN,
 };
 
 /* draw line functions for all console modes */
@@ -1510,7 +1510,7 @@ static void sm501_realize_sysbus(DeviceState *dev, Error 
**errp)
     if (s->chr_state) {
         serial_mm_init(&s->state.mmio_region, SM501_UART0, 2,
                        NULL, /* TODO : chain irq to IRL */
-                       115200, s->chr_state, DEVICE_NATIVE_ENDIAN);
+                       115200, s->chr_state, DEVICE_LITTLE_ENDIAN);
     }
 }
 
diff --git a/hw/display/sm501_template.h b/hw/display/sm501_template.h
index 832ee61..54807bd 100644
--- a/hw/display/sm501_template.h
+++ b/hw/display/sm501_template.h
@@ -64,10 +64,10 @@ static void glue(draw_line16_, PIXEL_NAME)(
     uint8_t r, g, b;
 
     do {
-        rgb565 = lduw_p(s);
-        r = ((rgb565 >> 11) & 0x1f) << 3;
-        g = ((rgb565 >>  5) & 0x3f) << 2;
-        b = ((rgb565 >>  0) & 0x1f) << 3;
+        rgb565 = lduw_le_p(s);
+        r = (rgb565 >> 8) & 0xf8;
+        g = (rgb565 >> 3) & 0xfc;
+        b = (rgb565 << 3) & 0xf8;
         *(PIXEL_TYPE *)d = glue(rgb_to_pixel, PIXEL_NAME)(r, g, b);
         s += 2;
         d += BPP;
@@ -80,16 +80,9 @@ static void glue(draw_line32_, PIXEL_NAME)(
     uint8_t r, g, b;
 
     do {
-        ldub_p(s);
-#if defined(TARGET_WORDS_BIGENDIAN)
-        r = s[1];
-        g = s[2];
-        b = s[3];
-#else
-        b = s[0];
-        g = s[1];
         r = s[2];
-#endif
+        g = s[1];
+        b = s[0];
         *(PIXEL_TYPE *)d = glue(rgb_to_pixel, PIXEL_NAME)(r, g, b);
         s += 4;
         d += BPP;
-- 
2.7.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]