qemu-trivial
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-trivial] [Qemu-devel] [PATCH 1/4] pckbd: Convert DPRINTF->trac


From: Philippe Mathieu-Daudé
Subject: Re: [Qemu-trivial] [Qemu-devel] [PATCH 1/4] pckbd: Convert DPRINTF->trace
Date: Tue, 12 Feb 2019 15:10:25 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.4.0

On 2/12/19 2:47 PM, Dr. David Alan Gilbert (git) wrote:
> From: "Dr. David Alan Gilbert" <address@hidden>
> 
> Signed-off-by: Dr. David Alan Gilbert <address@hidden>

Per https://lists.gnu.org/archive/html/qemu-devel/2018-10/msg03186.html
this one already has:

Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
Reviewed-by: Stefan Hajnoczi <address@hidden>

> ---
>  hw/input/pckbd.c      | 19 ++++++-------------
>  hw/input/trace-events |  7 +++++++
>  2 files changed, 13 insertions(+), 13 deletions(-)
> 
> diff --git a/hw/input/pckbd.c b/hw/input/pckbd.c
> index 72e7d5f6cc..47a606f5e3 100644
> --- a/hw/input/pckbd.c
> +++ b/hw/input/pckbd.c
> @@ -30,14 +30,7 @@
>  #include "hw/input/i8042.h"
>  #include "sysemu/sysemu.h"
>  
> -/* debug PC keyboard */
> -//#define DEBUG_KBD
> -#ifdef DEBUG_KBD
> -#define DPRINTF(fmt, ...)                                       \
> -    do { printf("KBD: " fmt , ## __VA_ARGS__); } while (0)
> -#else
> -#define DPRINTF(fmt, ...)
> -#endif
> +#include "trace.h"
>  
>  /*   Keyboard Controller Commands */
>  #define KBD_CCMD_READ_MODE   0x20    /* Read mode bits */
> @@ -210,7 +203,7 @@ static uint64_t kbd_read_status(void *opaque, hwaddr addr,
>      KBDState *s = opaque;
>      int val;
>      val = s->status;
> -    DPRINTF("kbd: read status=0x%02x\n", val);
> +    trace_pckbd_kbd_read_status(val);
>      return val;
>  }
>  
> @@ -224,7 +217,7 @@ static void kbd_queue(KBDState *s, int b, int aux)
>  
>  static void outport_write(KBDState *s, uint32_t val)
>  {
> -    DPRINTF("kbd: write outport=0x%02x\n", val);
> +    trace_pckbd_outport_write(val);
>      s->outport = val;
>      qemu_set_irq(s->a20_out, (val >> 1) & 1);
>      if (!(val & 1)) {
> @@ -237,7 +230,7 @@ static void kbd_write_command(void *opaque, hwaddr addr,
>  {
>      KBDState *s = opaque;
>  
> -    DPRINTF("kbd: write cmd=0x%02" PRIx64 "\n", val);
> +    trace_pckbd_kbd_write_command(val);
>  
>      /* Bits 3-0 of the output port P2 of the keyboard controller may be 
> pulsed
>       * low for approximately 6 micro seconds. Bits 3-0 of the KBD_CCMD_PULSE
> @@ -326,7 +319,7 @@ static uint64_t kbd_read_data(void *opaque, hwaddr addr,
>      else
>          val = ps2_read_data(s->kbd);
>  
> -    DPRINTF("kbd: read data=0x%02x\n", val);
> +    trace_pckbd_kbd_read_data(val);
>      return val;
>  }
>  
> @@ -335,7 +328,7 @@ static void kbd_write_data(void *opaque, hwaddr addr,
>  {
>      KBDState *s = opaque;
>  
> -    DPRINTF("kbd: write data=0x%02" PRIx64 "\n", val);
> +    trace_pckbd_kbd_write_data(val);
>  
>      switch(s->write_cmd) {
>      case 0:
> diff --git a/hw/input/trace-events b/hw/input/trace-events
> index 3965a842ae..8e53ae5bbf 100644
> --- a/hw/input/trace-events
> +++ b/hw/input/trace-events
> @@ -14,6 +14,13 @@ adb_mouse_readreg(int reg, uint8_t val0, uint8_t val1) 
> "reg %d obuf[0] 0x%2.2x o
>  adb_mouse_request_change_addr(int devaddr) "change addr to 0x%x"
>  adb_mouse_request_change_addr_and_handler(int devaddr, int handler) "change 
> addr and handler to 0x%x, 0x%x"
>  
> +# hw/input/pckbd.c
> +pckbd_kbd_read_data(uint32_t val) "0x%02x"
> +pckbd_kbd_read_status(int status) "0x%02x"
> +pckbd_outport_write(uint32_t val) "0x%02x"
> +pckbd_kbd_write_command(uint64_t val) "0x%02"PRIx64
> +pckbd_kbd_write_data(uint64_t val) "0x%02"PRIx64
> +
>  # hw/input/ps2.c
>  ps2_put_keycode(void *opaque, int keycode) "%p keycode 0x%02x"
>  ps2_keyboard_event(void *opaque, int qcode, int down, unsigned int modifier, 
> unsigned int modifiers) "%p qcode %d down %d modifier 0x%x modifiers 0x%x"
> 



reply via email to

[Prev in Thread] Current Thread [Next in Thread]