[PULL v2 04/16] hw/unicore32/puv3: Use qemu_log

qemu-trivial

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PULL v2 04/16] hw/unicore32/puv3: Use qemu_log_mask(ERROR) instead of d

From:	Laurent Vivier
Subject:	[PULL v2 04/16] hw/unicore32/puv3: Use qemu_log_mask(ERROR) instead of debug printf()
Date:	Wed, 10 Jun 2020 15:09:59 +0200

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Replace some debug printf() calls by qemu_log_mask(LOG_GUEST_ERROR).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200524164503.11944-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
 hw/dma/puv3_dma.c   |  9 +++++++--
 hw/gpio/puv3_gpio.c | 15 +++++++++++----
 hw/intc/puv3_intc.c |  9 +++++++--
 hw/misc/puv3_pm.c   |  9 +++++++--
 hw/timer/puv3_ost.c |  9 +++++++--
 hw/unicore32/puv3.c |  2 --
 6 files changed, 39 insertions(+), 14 deletions(-)

diff --git a/hw/dma/puv3_dma.c b/hw/dma/puv3_dma.c
index 5488d388a962..7fa979180f3a 100644
--- a/hw/dma/puv3_dma.c
+++ b/hw/dma/puv3_dma.c
@@ -15,6 +15,7 @@
 #undef DEBUG_PUV3
 #include "hw/unicore32/puv3.h"
 #include "qemu/module.h"
+#include "qemu/log.h"
 
 #define PUV3_DMA_CH_NR          (6)
 #define PUV3_DMA_CH_MASK        (0xff)
@@ -43,7 +44,9 @@ static uint64_t puv3_dma_read(void *opaque, hwaddr offset,
         ret = s->reg_CFG[PUV3_DMA_CH(offset)];
         break;
     default:
-        DPRINTF("Bad offset 0x%x\n", offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Bad read offset 0x%"HWADDR_PRIx"\n",
+                      __func__, offset);
     }
     DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
 
@@ -62,7 +65,9 @@ static void puv3_dma_write(void *opaque, hwaddr offset,
         s->reg_CFG[PUV3_DMA_CH(offset)] = value;
         break;
     default:
-        DPRINTF("Bad offset 0x%x\n", offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Bad write offset 0x%"HWADDR_PRIx"\n",
+                      __func__, offset);
     }
     DPRINTF("offset 0x%x, value 0x%x\n", offset, value);
 }
diff --git a/hw/gpio/puv3_gpio.c b/hw/gpio/puv3_gpio.c
index d19e3425140e..7362b6715f20 100644
--- a/hw/gpio/puv3_gpio.c
+++ b/hw/gpio/puv3_gpio.c
@@ -15,6 +15,7 @@
 #undef DEBUG_PUV3
 #include "hw/unicore32/puv3.h"
 #include "qemu/module.h"
+#include "qemu/log.h"
 
 #define TYPE_PUV3_GPIO "puv3_gpio"
 #define PUV3_GPIO(obj) OBJECT_CHECK(PUV3GPIOState, (obj), TYPE_PUV3_GPIO)
@@ -47,7 +48,9 @@ static uint64_t puv3_gpio_read(void *opaque, hwaddr offset,
         ret = s->reg_GPIR;
         break;
     default:
-        DPRINTF("Bad offset 0x%x\n", offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Bad read offset 0x%"HWADDR_PRIx"\n",
+                      __func__, offset);
     }
     DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
 
@@ -68,14 +71,16 @@ static void puv3_gpio_write(void *opaque, hwaddr offset,
         if (s->reg_GPDR & value) {
             s->reg_GPLR |= value;
         } else {
-            DPRINTF("Write gpio input port error!");
+            qemu_log_mask(LOG_GUEST_ERROR, "%s: Write gpio input port\n",
+                          __func__);
         }
         break;
     case 0x0c:
         if (s->reg_GPDR & value) {
             s->reg_GPLR &= ~value;
         } else {
-            DPRINTF("Write gpio input port error!");
+            qemu_log_mask(LOG_GUEST_ERROR, "%s: Write gpio input port\n",
+                          __func__);
         }
         break;
     case 0x10: /* GRER */
@@ -86,7 +91,9 @@ static void puv3_gpio_write(void *opaque, hwaddr offset,
         s->reg_GPIR = value;
         break;
     default:
-        DPRINTF("Bad offset 0x%x\n", offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Bad write offset 0x%"HWADDR_PRIx"\n",
+                      __func__, offset);
     }
 }
 
diff --git a/hw/intc/puv3_intc.c b/hw/intc/puv3_intc.c
index e018955ce8cb..090d4839d103 100644
--- a/hw/intc/puv3_intc.c
+++ b/hw/intc/puv3_intc.c
@@ -16,6 +16,7 @@
 #undef DEBUG_PUV3
 #include "hw/unicore32/puv3.h"
 #include "qemu/module.h"
+#include "qemu/log.h"
 
 #define TYPE_PUV3_INTC "puv3_intc"
 #define PUV3_INTC(obj) OBJECT_CHECK(PUV3INTCState, (obj), TYPE_PUV3_INTC)
@@ -68,7 +69,9 @@ static uint64_t puv3_intc_read(void *opaque, hwaddr offset,
         ret = s->reg_ICPR; /* the same value with ICPR */
         break;
     default:
-        DPRINTF("Bad offset %x\n", (int)offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Bad read offset 0x%"HWADDR_PRIx"\n",
+                      __func__, offset);
     }
     DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
     return ret;
@@ -88,7 +91,9 @@ static void puv3_intc_write(void *opaque, hwaddr offset,
         s->reg_ICMR = value;
         break;
     default:
-        DPRINTF("Bad offset 0x%x\n", (int)offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Bad write offset 0x%"HWADDR_PRIx"\n",
+                      __func__, offset);
         return;
     }
     puv3_intc_update(s);
diff --git a/hw/misc/puv3_pm.c b/hw/misc/puv3_pm.c
index c213500d9c3c..8989d363cd0a 100644
--- a/hw/misc/puv3_pm.c
+++ b/hw/misc/puv3_pm.c
@@ -15,6 +15,7 @@
 #undef DEBUG_PUV3
 #include "hw/unicore32/puv3.h"
 #include "qemu/module.h"
+#include "qemu/log.h"
 
 #define TYPE_PUV3_PM "puv3_pm"
 #define PUV3_PM(obj) OBJECT_CHECK(PUV3PMState, (obj), TYPE_PUV3_PM)
@@ -73,7 +74,9 @@ static uint64_t puv3_pm_read(void *opaque, hwaddr offset,
         ret = 0x7;
         break;
     default:
-        DPRINTF("Bad offset 0x%x\n", offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Bad read offset 0x%"HWADDR_PRIx"\n",
+                      __func__, offset);
     }
     DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
 
@@ -105,7 +108,9 @@ static void puv3_pm_write(void *opaque, hwaddr offset,
     case 0x38:
         break;
     default:
-        DPRINTF("Bad offset 0x%x\n", offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Bad write offset 0x%"HWADDR_PRIx"\n",
+                      __func__, offset);
     }
     DPRINTF("offset 0x%x, value 0x%x\n", offset, value);
 }
diff --git a/hw/timer/puv3_ost.c b/hw/timer/puv3_ost.c
index 697519593bb5..f76b0bb1cac7 100644
--- a/hw/timer/puv3_ost.c
+++ b/hw/timer/puv3_ost.c
@@ -14,6 +14,7 @@
 #include "hw/irq.h"
 #include "hw/ptimer.h"
 #include "qemu/module.h"
+#include "qemu/log.h"
 
 #undef DEBUG_PUV3
 #include "hw/unicore32/puv3.h"
@@ -52,7 +53,9 @@ static uint64_t puv3_ost_read(void *opaque, hwaddr offset,
         ret = s->reg_OIER;
         break;
     default:
-        DPRINTF("Bad offset %x\n", (int)offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Bad read offset 0x%"HWADDR_PRIx"\n",
+                      __func__, offset);
     }
     DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
     return ret;
@@ -88,7 +91,9 @@ static void puv3_ost_write(void *opaque, hwaddr offset,
         s->reg_OIER = value;
         break;
     default:
-        DPRINTF("Bad offset %x\n", (int)offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Bad write offset 0x%"HWADDR_PRIx"\n",
+                      __func__, offset);
     }
 }
 
diff --git a/hw/unicore32/puv3.c b/hw/unicore32/puv3.c
index 7f9c0238fe0f..eacacb4249bd 100644
--- a/hw/unicore32/puv3.c
+++ b/hw/unicore32/puv3.c
@@ -16,8 +16,6 @@
 #include "hw/boards.h"
 #include "hw/loader.h"
 #include "sysemu/qtest.h"
-
-#undef DEBUG_PUV3
 #include "hw/unicore32/puv3.h"
 #include "hw/input/i8042.h"
 #include "hw/irq.h"
-- 
2.26.2

[Prev in Thread]

Current Thread

[Next in Thread]

[PULL v2 02/16] net: Do not include a newline in the id of -nic devices, (continued)
- [PULL v2 02/16] net: Do not include a newline in the id of -nic devices, Laurent Vivier, 2020/06/10
- [PULL v2 08/16] hw/arm/aspeed: Correct DRAM container region size, Laurent Vivier, 2020/06/10
- [PULL v2 01/16] Fix parameter type in vhost migration log path, Laurent Vivier, 2020/06/10
- [PULL v2 07/16] qemu-img: Fix doc typo for 'bitmap' subcommand, Laurent Vivier, 2020/06/10
- [PULL v2 06/16] hw/misc/auxbus: Use qemu_log_mask(UNIMP) instead of debug printf, Laurent Vivier, 2020/06/10
- [PULL v2 09/16] hw/hppa/dino: Use the IEC binary prefix definitions, Laurent Vivier, 2020/06/10
- [PULL v2 13/16] target/unicore32: Replace DPRINTF() by qemu_log_mask(GUEST_ERROR), Laurent Vivier, 2020/06/10
- [PULL v2 12/16] target/unicore32: Remove unused headers, Laurent Vivier, 2020/06/10
- [PULL v2 14/16] target/unicore32: Prefer qemu_semihosting_log_out() over curses, Laurent Vivier, 2020/06/10
- [PULL v2 11/16] target/i386/cpu: Use the IEC binary prefix definitions, Laurent Vivier, 2020/06/10
- [PULL v2 04/16] hw/unicore32/puv3: Use qemu_log_mask(ERROR) instead of debug printf(), Laurent Vivier <=
- [PULL v2 16/16] semihosting: remove the pthread include which seems unused, Laurent Vivier, 2020/06/10
- [PULL v2 15/16] hw/openrisc/openrisc_sim: Add assertion to silence GCC warning, Laurent Vivier, 2020/06/10
- [PULL v2 10/16] hw/i386/xen/xen-hvm: Use the IEC binary prefix definitions, Laurent Vivier, 2020/06/10
- Re: [PULL v2 00/16] Trivial branch for 5.1 patches, Peter Maydell, 2020/06/11

Prev by Date: [PULL v2 11/16] target/i386/cpu: Use the IEC binary prefix definitions
Next by Date: [PULL v2 16/16] semihosting: remove the pthread include which seems unused
Previous by thread: [PULL v2 11/16] target/i386/cpu: Use the IEC binary prefix definitions
Next by thread: [PULL v2 16/16] semihosting: remove the pthread include which seems unused
Index(es):
- Date
- Thread