[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v4 3/3] target/i386: Restrict X86CPUFeatureWord to X86 target
From: |
Eduardo Habkost |
Subject: |
Re: [PATCH v4 3/3] target/i386: Restrict X86CPUFeatureWord to X86 targets |
Date: |
Thu, 1 Oct 2020 11:29:05 -0400 |
On Thu, Oct 01, 2020 at 04:41:52PM +0200, Philippe Mathieu-Daudé wrote:
> Only qemu-system-FOO and qemu-storage-daemon provide QMP
> monitors, therefore such declarations and definitions are
> irrelevant for user-mode emulation.
>
> Restricting the x86-specific commands to machine-target.json
> pulls less QAPI-generated code into user-mode.
Is this still true without "qapi: Restrict code generated for
user-mode"?
Markus, Eric: what's the difference between machine.json and
machine-target.json? commit 7f7b4e7abef4 ("qapi: Split
machine-target.json off target.json and misc.json") explains what
but not why.
>
> Acked-by: Richard Henderson <richard.henderson@linaro.org>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Why the visit_type_X86CPUFeatureWordInfoList() stub was required
in v3, but not in this version?
> ---
> qapi/machine-target.json | 45 ++++++++++++++++++++++++++++++++++++++++
> qapi/machine.json | 42 -------------------------------------
> target/i386/cpu.c | 2 +-
> 3 files changed, 46 insertions(+), 43 deletions(-)
>
> diff --git a/qapi/machine-target.json b/qapi/machine-target.json
> index 698850cc78..b4d769a53b 100644
> --- a/qapi/machine-target.json
> +++ b/qapi/machine-target.json
> @@ -4,6 +4,51 @@
> # This work is licensed under the terms of the GNU GPL, version 2 or later.
> # See the COPYING file in the top-level directory.
>
> +##
> +# @X86CPURegister32:
> +#
> +# A X86 32-bit register
> +#
> +# Since: 1.5
> +##
> +{ 'enum': 'X86CPURegister32',
> + 'data': [ 'EAX', 'EBX', 'ECX', 'EDX', 'ESP', 'EBP', 'ESI', 'EDI' ],
> + 'if': 'defined(TARGET_I386)' }
> +
> +##
> +# @X86CPUFeatureWordInfo:
> +#
> +# Information about a X86 CPU feature word
> +#
> +# @cpuid-input-eax: Input EAX value for CPUID instruction for that feature
> word
> +#
> +# @cpuid-input-ecx: Input ECX value for CPUID instruction for that
> +# feature word
> +#
> +# @cpuid-register: Output register containing the feature bits
> +#
> +# @features: value of output register, containing the feature bits
> +#
> +# Since: 1.5
> +##
> +{ 'struct': 'X86CPUFeatureWordInfo',
> + 'data': { 'cpuid-input-eax': 'int',
> + '*cpuid-input-ecx': 'int',
> + 'cpuid-register': 'X86CPURegister32',
> + 'features': 'int' },
> + 'if': 'defined(TARGET_I386)' }
> +
> +##
> +# @DummyForceArrays:
> +#
> +# Not used by QMP; hack to let us use X86CPUFeatureWordInfoList internally
> +#
> +# Since: 2.5
> +##
> +{ 'struct': 'DummyForceArrays',
> + 'data': { 'unused': ['X86CPUFeatureWordInfo'] },
> + 'if': 'defined(TARGET_I386)' }
> +
> ##
> # @CpuModelInfo:
> #
> diff --git a/qapi/machine.json b/qapi/machine.json
> index 756dacb06f..995e972858 100644
> --- a/qapi/machine.json
> +++ b/qapi/machine.json
> @@ -574,48 +574,6 @@
> 'dst': 'uint16',
> 'val': 'uint8' }}
>
> -##
> -# @X86CPURegister32:
> -#
> -# A X86 32-bit register
> -#
> -# Since: 1.5
> -##
> -{ 'enum': 'X86CPURegister32',
> - 'data': [ 'EAX', 'EBX', 'ECX', 'EDX', 'ESP', 'EBP', 'ESI', 'EDI' ] }
> -
> -##
> -# @X86CPUFeatureWordInfo:
> -#
> -# Information about a X86 CPU feature word
> -#
> -# @cpuid-input-eax: Input EAX value for CPUID instruction for that feature
> word
> -#
> -# @cpuid-input-ecx: Input ECX value for CPUID instruction for that
> -# feature word
> -#
> -# @cpuid-register: Output register containing the feature bits
> -#
> -# @features: value of output register, containing the feature bits
> -#
> -# Since: 1.5
> -##
> -{ 'struct': 'X86CPUFeatureWordInfo',
> - 'data': { 'cpuid-input-eax': 'int',
> - '*cpuid-input-ecx': 'int',
> - 'cpuid-register': 'X86CPURegister32',
> - 'features': 'int' } }
> -
> -##
> -# @DummyForceArrays:
> -#
> -# Not used by QMP; hack to let us use X86CPUFeatureWordInfoList internally
> -#
> -# Since: 2.5
> -##
> -{ 'struct': 'DummyForceArrays',
> - 'data': { 'unused': ['X86CPUFeatureWordInfo'] } }
> -
> ##
> # @NumaCpuOptions:
> #
> diff --git a/target/i386/cpu.c b/target/i386/cpu.c
> index 9f72342506..848a65ded2 100644
> --- a/target/i386/cpu.c
> +++ b/target/i386/cpu.c
> @@ -38,7 +38,7 @@
> #include "qemu/option.h"
> #include "qemu/config-file.h"
> #include "qapi/error.h"
> -#include "qapi/qapi-visit-machine.h"
> +#include "qapi/qapi-visit-machine-target.h"
> #include "qapi/qapi-visit-run-state.h"
> #include "qapi/qmp/qdict.h"
> #include "qapi/qmp/qerror.h"
> --
> 2.26.2
>
--
Eduardo
[PATCH v4 3/3] target/i386: Restrict X86CPUFeatureWord to X86 targets, Philippe Mathieu-Daudé, 2020/10/01