[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Texi2html-cvs] texi2html ChangeLog Makefile.in NEWS aclocal.m4...
|
From: |
Derek Robert Price |
|
Subject: |
[Texi2html-cvs] texi2html ChangeLog Makefile.in NEWS aclocal.m4... |
|
Date: |
Fri, 02 Jan 2009 04:02:36 +0000 |
CVSROOT: /cvsroot/texi2html
Module name: texi2html
Changes by: Derek Robert Price <dprice> 09/01/02 04:02:35
Modified files:
. : ChangeLog Makefile.in NEWS aclocal.m4 configure
configure.ac texi2html.spec translations.pl
Tests : Makefile.in
doc : Makefile.in stamp-vti version.texi
test : Makefile.in
test/contents : Makefile.in
test/coverage : Makefile.in
test/encodings : Makefile.in
test/formatting: Makefile.in
test/htmlxref : Makefile.in
test/htmlxref-only_mono: Makefile.in
test/htmlxref-only_split: Makefile.in
test/indices : Makefile.in
test/invalid : Makefile.in
test/layout : Makefile.in
test/macros : Makefile.in
test/manuals : Makefile.in
test/many_input_files: Makefile.in
test/misc : Makefile.in
test/nested_formats: Makefile.in
test/sectionning: Makefile.in
test/singular_manual: Makefile.in
test/tar_manual: Makefile.in
test/texi2html_manual: Makefile.in
test/xemacs_manual: Makefile.in
Log message:
* configure.ac: Update version # for 1.80 release.
* NEWS: Add date for 1.80 release.
CVSWeb URLs:
http://cvs.savannah.gnu.org/viewcvs/texi2html/ChangeLog?cvsroot=texi2html&r1=1.349&r2=1.350
http://cvs.savannah.gnu.org/viewcvs/texi2html/Makefile.in?cvsroot=texi2html&r1=1.61&r2=1.62
http://cvs.savannah.gnu.org/viewcvs/texi2html/NEWS?cvsroot=texi2html&r1=1.88&r2=1.89
http://cvs.savannah.gnu.org/viewcvs/texi2html/aclocal.m4?cvsroot=texi2html&r1=1.35&r2=1.36
http://cvs.savannah.gnu.org/viewcvs/texi2html/configure?cvsroot=texi2html&r1=1.53&r2=1.54
http://cvs.savannah.gnu.org/viewcvs/texi2html/configure.ac?cvsroot=texi2html&r1=1.15&r2=1.16
http://cvs.savannah.gnu.org/viewcvs/texi2html/texi2html.spec?cvsroot=texi2html&r1=1.11&r2=1.12
http://cvs.savannah.gnu.org/viewcvs/texi2html/translations.pl?cvsroot=texi2html&r1=1.21&r2=1.22
http://cvs.savannah.gnu.org/viewcvs/texi2html/Tests/Makefile.in?cvsroot=texi2html&r1=1.49&r2=1.50
http://cvs.savannah.gnu.org/viewcvs/texi2html/doc/Makefile.in?cvsroot=texi2html&r1=1.44&r2=1.45
http://cvs.savannah.gnu.org/viewcvs/texi2html/doc/stamp-vti?cvsroot=texi2html&r1=1.51&r2=1.52
http://cvs.savannah.gnu.org/viewcvs/texi2html/doc/version.texi?cvsroot=texi2html&r1=1.51&r2=1.52
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/Makefile.in?cvsroot=texi2html&r1=1.5&r2=1.6
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/contents/Makefile.in?cvsroot=texi2html&r1=1.2&r2=1.3
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/coverage/Makefile.in?cvsroot=texi2html&r1=1.2&r2=1.3
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/encodings/Makefile.in?cvsroot=texi2html&r1=1.4&r2=1.5
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/formatting/Makefile.in?cvsroot=texi2html&r1=1.7&r2=1.8
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/htmlxref/Makefile.in?cvsroot=texi2html&r1=1.2&r2=1.3
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/htmlxref-only_mono/Makefile.in?cvsroot=texi2html&r1=1.2&r2=1.3
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/htmlxref-only_split/Makefile.in?cvsroot=texi2html&r1=1.2&r2=1.3
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/indices/Makefile.in?cvsroot=texi2html&r1=1.3&r2=1.4
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/invalid/Makefile.in?cvsroot=texi2html&r1=1.3&r2=1.4
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/layout/Makefile.in?cvsroot=texi2html&r1=1.2&r2=1.3
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/macros/Makefile.in?cvsroot=texi2html&r1=1.4&r2=1.5
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/manuals/Makefile.in?cvsroot=texi2html&r1=1.3&r2=1.4
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/many_input_files/Makefile.in?cvsroot=texi2html&r1=1.5&r2=1.6
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/misc/Makefile.in?cvsroot=texi2html&r1=1.3&r2=1.4
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/nested_formats/Makefile.in?cvsroot=texi2html&r1=1.2&r2=1.3
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/sectionning/Makefile.in?cvsroot=texi2html&r1=1.7&r2=1.8
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/singular_manual/Makefile.in?cvsroot=texi2html&r1=1.1&r2=1.2
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/tar_manual/Makefile.in?cvsroot=texi2html&r1=1.2&r2=1.3
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/texi2html_manual/Makefile.in?cvsroot=texi2html&r1=1.2&r2=1.3
http://cvs.savannah.gnu.org/viewcvs/texi2html/test/xemacs_manual/Makefile.in?cvsroot=texi2html&r1=1.1&r2=1.2
Patches:
Index: ChangeLog
===================================================================
RCS file: /cvsroot/texi2html/texi2html/ChangeLog,v
retrieving revision 1.349
retrieving revision 1.350
diff -u -b -r1.349 -r1.350
--- ChangeLog 1 Jan 2009 22:35:07 -0000 1.349
+++ ChangeLog 2 Jan 2009 04:02:31 -0000 1.350
@@ -1,3 +1,8 @@
+2009-01-01 Derek Price <address@hidden>
+
+ * configure.ac: Update version # for 1.80 release.
+ * NEWS: Add date for 1.80 release.
+
2009-01-01 Patrice Dumas <address@hidden>
* texi2html.init: remove space in front of @quotation argument.
Index: Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/Makefile.in,v
retrieving revision 1.61
retrieving revision 1.62
diff -u -b -r1.61 -r1.62
--- Makefile.in 18 Aug 2008 18:01:45 -0000 1.61
+++ Makefile.in 2 Jan 2009 04:02:31 -0000 1.62
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -172,7 +172,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = . doc Tests test
@@ -495,8 +494,8 @@
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
@@ -521,8 +520,8 @@
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
@@ -532,12 +531,13 @@
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
+ here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
@@ -607,10 +607,6 @@
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
-dist-lzma: distdir
- tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
- $(am__remove_distdir)
-
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
@@ -639,8 +635,6 @@
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.lzma*) \
- unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
@@ -798,19 +792,19 @@
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am--refresh check check-am clean clean-generic \
clean-local ctags ctags-recursive dist dist-all dist-bzip2 \
- dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \
- distclean distclean-generic distclean-tags distcleancheck \
- distdir distuninstallcheck dvi dvi-am html html-am html-local \
- info info-am install install-am install-binSCRIPTS \
- install-data install-data-am install-dist_i18nDATA \
- install-dist_imagesDATA install-dist_pkgdataDATA install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- installdirs-am maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
- tags-recursive uninstall uninstall-am uninstall-binSCRIPTS \
+ dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \
+ distclean-generic distclean-tags distcleancheck distdir \
+ distuninstallcheck dvi dvi-am html html-am html-local info \
+ info-am install install-am install-binSCRIPTS install-data \
+ install-data-am install-dist_i18nDATA install-dist_imagesDATA \
+ install-dist_pkgdataDATA install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs installdirs-am \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \
+ uninstall uninstall-am uninstall-binSCRIPTS \
uninstall-dist_i18nDATA uninstall-dist_imagesDATA \
uninstall-dist_pkgdataDATA
Index: NEWS
===================================================================
RCS file: /cvsroot/texi2html/texi2html/NEWS,v
retrieving revision 1.88
retrieving revision 1.89
diff -u -b -r1.88 -r1.89
--- NEWS 11 Nov 2008 00:52:24 -0000 1.88
+++ NEWS 2 Jan 2009 04:02:31 -0000 1.89
@@ -1,6 +1,6 @@
This file records noteworthy changes.
-1.80 ()
+1.80 (2009-01-01)
* NEW FEATURES
------------
Index: aclocal.m4
===================================================================
RCS file: /cvsroot/texi2html/texi2html/aclocal.m4,v
retrieving revision 1.35
retrieving revision 1.36
diff -u -b -r1.35 -r1.36
--- aclocal.m4 1 Nov 2008 00:01:24 -0000 1.35
+++ aclocal.m4 2 Jan 2009 04:02:31 -0000 1.36
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.10.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.10 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2005, 2006 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -11,15 +11,12 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(AC_AUTOCONF_VERSION, [2.63],,
-[m4_warning([this file was generated for autoconf 2.63.
-You have another version of autoconf. It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically
`autoreconf'.])])
+m4_if(m4_PACKAGE_VERSION, [2.61],,
+[m4_fatal([this file was generated for autoconf 2.61.
+You have another version of autoconf. If you want to use that,
+you should regenerate the build system entirely.], [63])])
-# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc.
+# Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -34,7 +31,7 @@
[am__api_version='1.10'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.10.1], [],
+m4_if([$1], [1.10], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
@@ -50,10 +47,8 @@
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10.1])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)])
+[AM_AUTOMAKE_VERSION([1.10])dnl
+_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
@@ -146,13 +141,13 @@
# Do all the work for Automake. -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008 Free Software Foundation, Inc.
+# 2005, 2006 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 13
+# serial 12
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
@@ -257,17 +252,16 @@
# our stamp files there.
AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
[# Compute $1's index in $config_headers.
-_am_arg=$1
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
- $_am_arg | $_am_arg:* )
+ $1 | $1:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
-echo "timestamp for $_am_arg"
>`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
#
@@ -533,7 +527,7 @@
# _AM_SUBST_NOTMAKE(VARIABLE)
# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
# This macro is traced by Automake.
AC_DEFUN([_AM_SUBST_NOTMAKE])
Index: configure
===================================================================
RCS file: /cvsroot/texi2html/texi2html/configure,v
retrieving revision 1.53
retrieving revision 1.54
diff -u -b -r1.53 -r1.54
--- configure 1 Nov 2008 00:01:24 -0000 1.53
+++ configure 2 Jan 2009 04:02:31 -0000 1.54
@@ -1,11 +1,11 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.63 for texi2html 1.79.
+# Generated by GNU Autoconf 2.61 for texi2html 1.80.
#
# Report bugs to <address@hidden>.
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## --------------------- ##
@@ -17,7 +17,7 @@
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
@@ -39,45 +39,17 @@
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo";
then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
PATH_SEPARATOR=';'
- }
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
fi
# Support unset when possible.
@@ -93,6 +65,8 @@
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
+as_nl='
+'
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
@@ -115,7 +89,7 @@
as_myself=$0
fi
if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file
name" >&2
+ echo "$as_myself: error: cannot find myself; rerun with an absolute file
name" >&2
{ (exit 1); exit 1; }
fi
@@ -128,10 +102,17 @@
PS4='+ '
# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ fi
+done
# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1 &&
@@ -153,7 +134,7 @@
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
+echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
@@ -261,7 +242,7 @@
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
@@ -282,7 +263,7 @@
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
@@ -434,10 +415,9 @@
test \$exitcode = 0") || {
echo No shell found that supports shell functions.
- echo Please tell address@hidden about your system,
- echo including any error possibly output before this message.
- echo This can help us improve future autoconf versions.
- echo Configuration will now proceed without shell functions.
+ echo Please tell address@hidden about your system,
+ echo including any error possibly output before this
+ echo message
}
@@ -473,7 +453,7 @@
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX
shell" >&2
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX
shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
@@ -501,6 +481,7 @@
*)
ECHO_N='-n';;
esac
+
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
@@ -513,10 +494,10 @@
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
+ mkdir conf$$.dir
fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
as_ln_s='ln -s'
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
@@ -524,11 +505,8 @@
# In both cases, we have to default to `cp -p'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -p'
- elif ln conf$$.file conf$$ 2>/dev/null; then
+elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
else
as_ln_s='cp -p'
fi
@@ -596,98 +574,89 @@
# Identity of this package.
PACKAGE_NAME='texi2html'
PACKAGE_TARNAME='texi2html'
-PACKAGE_VERSION='1.79'
-PACKAGE_STRING='texi2html 1.79'
+PACKAGE_VERSION='1.80'
+PACKAGE_STRING='texi2html 1.80'
PACKAGE_BUGREPORT='address@hidden'
-ac_subst_vars='LTLIBOBJS
-LIBOBJS
-host_os
-host_vendor
-host_cpu
-host
-build_os
-build_vendor
-build_cpu
-build
-REQUIRE_DATA_DUMPER
-USE_DATA_DUMPER
-USE_UNIDECODE
-USE_UNICODE
-PERL
-PACKAGE_DATE
-MAINT
-MAINTAINER_MODE_FALSE
-MAINTAINER_MODE_TRUE
-am__untar
-am__tar
-AMTAR
-am__leading_dot
-SET_MAKE
-AWK
-mkdir_p
-MKDIR_P
-INSTALL_STRIP_PROGRAM
-STRIP
-install_sh
-MAKEINFO
-AUTOHEADER
-AUTOMAKE
-AUTOCONF
-ACLOCAL
-VERSION
-PACKAGE
-CYGPATH_W
-am__isrc
-INSTALL_DATA
-INSTALL_SCRIPT
-INSTALL_PROGRAM
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
+ac_subst_vars='SHELL
PATH_SEPARATOR
-SHELL'
+PACKAGE_NAME
+PACKAGE_TARNAME
+PACKAGE_VERSION
+PACKAGE_STRING
+PACKAGE_BUGREPORT
+exec_prefix
+prefix
+program_transform_name
+bindir
+sbindir
+libexecdir
+datarootdir
+datadir
+sysconfdir
+sharedstatedir
+localstatedir
+includedir
+oldincludedir
+docdir
+infodir
+htmldir
+dvidir
+pdfdir
+psdir
+libdir
+localedir
+mandir
+DEFS
+ECHO_C
+ECHO_N
+ECHO_T
+LIBS
+build_alias
+host_alias
+target_alias
+INSTALL_PROGRAM
+INSTALL_SCRIPT
+INSTALL_DATA
+am__isrc
+CYGPATH_W
+PACKAGE
+VERSION
+ACLOCAL
+AUTOCONF
+AUTOMAKE
+AUTOHEADER
+MAKEINFO
+install_sh
+STRIP
+INSTALL_STRIP_PROGRAM
+mkdir_p
+AWK
+SET_MAKE
+am__leading_dot
+AMTAR
+am__tar
+am__untar
+MAINTAINER_MODE_TRUE
+MAINTAINER_MODE_FALSE
+MAINT
+PACKAGE_DATE
+PERL
+USE_UNICODE
+USE_UNIDECODE
+USE_DATA_DUMPER
+REQUIRE_DATA_DUMPER
+build
+build_cpu
+build_vendor
+build_os
+host
+host_cpu
+host_vendor
+host_os
+LIBOBJS
+LTLIBOBJS'
ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-enable_maintainer_mode
-with_encode
-with_unidecode
-enable_translations
-enable_multiplatform
-'
ac_precious_vars='build_alias
host_alias
target_alias
@@ -697,8 +666,6 @@
# Initialize some variables set by options.
ac_init_help=
ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
# The variables have the same names as the options, with
# dashes changed to underlines.
cache_file=/dev/null
@@ -797,21 +764,13 @@
datarootdir=$ac_optarg ;;
-disable-* | --disable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *)
ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=no ;;
+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+ eval enable_$ac_feature=no ;;
-docdir | --docdir | --docdi | --doc | --do)
ac_prev=docdir ;;
@@ -824,21 +783,13 @@
dvidir=$ac_optarg ;;
-enable-* | --enable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *)
ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=\$ac_optarg ;;
+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+ eval enable_$ac_feature=\$ac_optarg ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -1029,38 +980,22 @@
ac_init_version=: ;;
-with-* | --with-*)
- ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *)
ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=\$ac_optarg ;;
+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+ eval with_$ac_package=\$ac_optarg ;;
-without-* | --without-*)
- ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *)
ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=no ;;
+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+ eval with_$ac_package=no ;;
--x)
# Obsolete; use --with-x.
@@ -1080,7 +1015,7 @@
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
- -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
+ -*) { echo "$as_me: error: unrecognized option: $ac_option
Try \`$0 --help' for more information." >&2
{ (exit 1); exit 1; }; }
;;
@@ -1089,16 +1024,16 @@
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
# Reject names that are not valid shell variable names.
expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
{ (exit 1); exit 1; }; }
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
*)
# FIXME: should be removed in autoconf 3.0.
- $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
: ${build_alias=$ac_option} ${host_alias=$ac_option}
${target_alias=$ac_option}
;;
@@ -1107,38 +1042,22 @@
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { $as_echo "$as_me: error: missing argument to $ac_option" >&2
+ { echo "$as_me: error: missing argument to $ac_option" >&2
{ (exit 1); exit 1; }; }
fi
-if test -n "$ac_unrecognized_opts"; then
- case $enable_option_checking in
- no) ;;
- fatal) { $as_echo "$as_me: error: unrecognized options:
$ac_unrecognized_opts" >&2
- { (exit 1); exit 1; }; } ;;
- *) $as_echo "$as_me: WARNING: unrecognized options:
$ac_unrecognized_opts" >&2 ;;
- esac
-fi
-
-# Check all directory arguments for consistency.
+# Be sure to have absolute directory names.
for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
datadir sysconfdir sharedstatedir localstatedir includedir \
oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
libdir localedir mandir
do
eval ac_val=\$$ac_var
- # Remove trailing slashes.
- case $ac_val in
- */ )
- ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
- eval $ac_var=\$ac_val;;
- esac
- # Be sure to have absolute directory names.
case $ac_val in
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
- { $as_echo "$as_me: error: expected an absolute directory name for
--$ac_var: $ac_val" >&2
+ { echo "$as_me: error: expected an absolute directory name for --$ac_var:
$ac_val" >&2
{ (exit 1); exit 1; }; }
done
@@ -1153,7 +1072,7 @@
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
- $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't
use --host.
+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use
--host.
If a cross compiler is detected then cross compile mode will be used." >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
@@ -1169,10 +1088,10 @@
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- { $as_echo "$as_me: error: working directory cannot be determined" >&2
+ { echo "$as_me: error: Working directory cannot be determined" >&2
{ (exit 1); exit 1; }; }
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
+ { echo "$as_me: error: pwd does not report name of working directory" >&2
{ (exit 1); exit 1; }; }
@@ -1180,12 +1099,12 @@
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_myself" : 'X\(//\)[^/]' \| \
- X"$as_myself" : 'X\(//\)$' \| \
- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
+ ac_confdir=`$as_dirname -- "$0" ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$0" : 'X\(//\)[^/]' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$0" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
@@ -1212,12 +1131,12 @@
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir"
>&2
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
{ (exit 1); exit 1; }; }
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me:
error: $ac_msg" >&2
+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error:
$ac_msg" >&2
{ (exit 1); exit 1; }; }
pwd)`
# When building in place, set srcdir=.
@@ -1244,7 +1163,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures texi2html 1.79 to adapt to many kinds of systems.
+\`configure' configures texi2html 1.80 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1314,12 +1233,11 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of texi2html 1.79:";;
+ short | recursive ) echo "Configuration of texi2html 1.80:";;
esac
cat <<\_ACEOF
Optional Features:
- --disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-maintainer-mode enable make rules and dependencies not useful
@@ -1347,17 +1265,15 @@
if test "$ac_init_help" = "recursive"; then
# If there are subdirs, report their specific --help.
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" ||
- { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
- continue
+ test -d "$ac_dir" || continue
ac_builddir=.
case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed
's|/[^\\/]*|/..|g;s|/||'`
+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
@@ -1393,7 +1309,7 @@
echo &&
$SHELL "$ac_srcdir/configure" --help=recursive
else
- $as_echo "$as_me: WARNING: no configuration information is in $ac_dir"
>&2
+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
fi || ac_status=$?
cd "$ac_pwd" || { ac_status=$?; break; }
done
@@ -1402,11 +1318,11 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-texi2html configure 1.79
-generated by GNU Autoconf 2.63
+texi2html configure 1.80
+generated by GNU Autoconf 2.61
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
@@ -1416,8 +1332,8 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by texi2html $as_me 1.79, which was
-generated by GNU Autoconf 2.63. Invocation command line was
+It was created by texi2html $as_me 1.80, which was
+generated by GNU Autoconf 2.61. Invocation command line was
$ $0 $@
@@ -1453,7 +1369,7 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- $as_echo "PATH: $as_dir"
+ echo "PATH: $as_dir"
done
IFS=$as_save_IFS
@@ -1488,7 +1404,7 @@
| -silent | --silent | --silen | --sile | --sil)
continue ;;
*\'*)
- ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
case $ac_pass in
1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
@@ -1540,12 +1456,11 @@
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var
contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains
a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
*) $as_unset $ac_var ;;
esac ;;
esac
@@ -1575,9 +1490,9 @@
do
eval ac_val=\$$ac_var
case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed
"s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
esac
- $as_echo "$ac_var='\''$ac_val'\''"
+ echo "$ac_var='\''$ac_val'\''"
done | sort
echo
@@ -1592,9 +1507,9 @@
do
eval ac_val=\$$ac_var
case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed
"s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
esac
- $as_echo "$ac_var='\''$ac_val'\''"
+ echo "$ac_var='\''$ac_val'\''"
done | sort
echo
fi
@@ -1610,8 +1525,8 @@
echo
fi
test "$ac_signal" != 0 &&
- $as_echo "$as_me: caught signal $ac_signal"
- $as_echo "$as_me: exit $exit_status"
+ echo "$as_me: caught signal $ac_signal"
+ echo "$as_me: exit $exit_status"
} >&5
rm -f core *.core core.conftest.* &&
rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
@@ -1653,24 +1568,21 @@
# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
+# Prefer explicitly selected file to automatically selected ones.
if test -n "$CONFIG_SITE"; then
- ac_site_file1=$CONFIG_SITE
+ set x "$CONFIG_SITE"
elif test "x$prefix" != xNONE; then
- ac_site_file1=$prefix/share/config.site
- ac_site_file2=$prefix/etc/config.site
+ set x "$prefix/share/config.site" "$prefix/etc/config.site"
else
- ac_site_file1=$ac_default_prefix/share/config.site
- ac_site_file2=$ac_default_prefix/etc/config.site
+ set x "$ac_default_prefix/share/config.site" \
+ "$ac_default_prefix/etc/config.site"
fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+shift
+for ac_site_file
do
- test "x$ac_site_file" = xNONE && continue
if test -r "$ac_site_file"; then
- { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
. "$ac_site_file"
fi
@@ -1680,16 +1592,16 @@
# Some versions of bash will fail to source /dev/null (special
# files actually), so we avoid doing that.
if test -f "$cache_file"; then
- { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
[\\/]* | ?:[\\/]* ) . "$cache_file";;
*) . "./$cache_file";;
esac
fi
else
- { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
>$cache_file
fi
@@ -1703,38 +1615,29 @@
eval ac_new_val=\$ac_env_${ac_var}_value
case $ac_old_set,$ac_new_set in
set,)
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val'
in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous
run" >&2;}
+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in
the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run"
>&2;}
ac_cache_corrupted=: ;;
,set)
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the
previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous
run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
ac_cache_corrupted=: ;;
,);;
*)
if test "x$ac_old_val" != "x$ac_new_val"; then
- # differences in whitespace do not lead to failure.
- ac_old_val_w=`echo x $ac_old_val`
- ac_new_val_w=`echo x $ac_new_val`
- if test "$ac_old_val_w" != "$ac_new_val_w"; then
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the
previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the
previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+echo "$as_me: former value: $ac_old_val" >&2;}
+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+echo "$as_me: current value: $ac_new_val" >&2;}
ac_cache_corrupted=:
- else
- { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in
\`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the
previous run:" >&2;}
- eval $ac_var=\$ac_old_val
- fi
- { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
-$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
-$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
fi;;
esac
# Pass precious variables to config.status.
if test "$ac_new_set" = set; then
case $ac_new_val in
- *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
*) ac_arg=$ac_var=$ac_new_val ;;
esac
case " $ac_configure_args " in
@@ -1744,12 +1647,10 @@
fi
done
if $ac_cache_corrupted; then
- { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise
the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build"
>&2;}
- { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm
$cache_file' and start over" >&5
-$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and
start over" >&2;}
+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the
build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm
$cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start
over" >&2;}
{ (exit 1); exit 1; }; }
fi
@@ -1803,8 +1704,8 @@
fi
done
if test -z "$ac_aux_dir"; then
- { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in
\"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\"
\"$srcdir/..\" \"$srcdir/../..\"" >&2;}
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in
\"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
+echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\"
\"$srcdir/..\" \"$srcdir/../..\"" >&2;}
{ (exit 1); exit 1; }; }
fi
@@ -1830,12 +1731,11 @@
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
if test -z "$INSTALL"; then
if test "${ac_cv_path_install+set}" = set; then
- $as_echo_n "(cached) " >&6
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -1864,29 +1764,17 @@
# program-specific install script used by HP pwplus--don't use.
:
else
- rm -rf conftest.one conftest.two conftest.dir
- echo one > conftest.one
- echo two > conftest.two
- mkdir conftest.dir
- if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two
"`pwd`/conftest.dir" &&
- test -s conftest.one && test -s conftest.two &&
- test -s conftest.dir/conftest.one &&
- test -s conftest.dir/conftest.two
- then
ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
break 3
fi
fi
- fi
done
done
;;
esac
-
done
IFS=$as_save_IFS
-rm -rf conftest.one conftest.two conftest.dir
fi
if test "${ac_cv_path_install+set}" = set; then
@@ -1899,8 +1787,8 @@
INSTALL=$ac_install_sh
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
@@ -1910,8 +1798,8 @@
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-$as_echo_n "checking whether build environment is sane... " >&6; }
+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
# Just in case
sleep 1
echo timestamp > conftest.file
@@ -1934,9 +1822,9 @@
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
- { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure
there is not a broken
+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there
is not a broken
alias in your environment" >&5
-$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a
broken
+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
alias in your environment" >&2;}
{ (exit 1); exit 1; }; }
fi
@@ -1947,23 +1835,26 @@
# Ok.
:
else
- { { $as_echo "$as_me:$LINENO: error: newly created file is older than
distributed files!
+ { { echo "$as_me:$LINENO: error: newly created file is older than
distributed files!
Check your system clock" >&5
-$as_echo "$as_me: error: newly created file is older than distributed files!
+echo "$as_me: error: newly created file is older than distributed files!
Check your system clock" >&2;}
{ (exit 1); exit 1; }; }
fi
-{ $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
test "$program_prefix" != NONE &&
program_transform_name="s&^&$program_prefix&;$program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.
+# Double any \ or $. echo might interpret backslashes.
# By default was `s,x,x', remove it if useless.
-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
-program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm -f conftest.sed
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
@@ -1974,15 +1865,15 @@
am_missing_run="$MISSING --run "
else
am_missing_run=
- { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or
missing" >&5
-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
fi
-{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
if test -z "$MKDIR_P"; then
if test "${ac_cv_path_mkdir+set}" = set; then
- $as_echo_n "(cached) " >&6
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
@@ -2017,8 +1908,8 @@
MKDIR_P="$ac_install_sh -d"
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
-$as_echo "$MKDIR_P" >&6; }
+{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+echo "${ECHO_T}$MKDIR_P" >&6; }
mkdir_p="$MKDIR_P"
case $mkdir_p in
@@ -2030,10 +1921,10 @@
do
# Extract the first word of "$ac_prog", so it can be a program name with
args.
set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_AWK+set}" = set; then
- $as_echo_n "(cached) " >&6
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$AWK"; then
ac_cv_prog_AWK="$AWK" # Let the user override the test.
@@ -2046,7 +1937,7 @@
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
@@ -2057,23 +1948,22 @@
fi
AWK=$ac_cv_prog_AWK
if test -n "$AWK"; then
- { $as_echo "$as_me:$LINENO: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
+ { echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
test -n "$AWK" && break
done
-{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-set x ${MAKE-make}
-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" =
set"; }; then
- $as_echo_n "(cached) " >&6
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.make <<\_ACEOF
SHELL = /bin/sh
@@ -2090,12 +1980,12 @@
rm -f conftest.make
fi
if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
+ { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
SET_MAKE=
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
SET_MAKE="MAKE=${MAKE-make}"
fi
@@ -2114,8 +2004,8 @@
am__isrc=' -I$(srcdir)'
# test to see if srcdir already configured
if test -f $srcdir/config.status; then
- { { $as_echo "$as_me:$LINENO: error: source directory already configured;
run \"make distclean\" there first" >&5
-$as_echo "$as_me: error: source directory already configured; run \"make
distclean\" there first" >&2;}
+ { { echo "$as_me:$LINENO: error: source directory already configured; run
\"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make
distclean\" there first" >&2;}
{ (exit 1); exit 1; }; }
fi
fi
@@ -2132,7 +2022,7 @@
# Define the identity of the package.
PACKAGE='texi2html'
- VERSION='1.79'
+ VERSION='1.80'
cat >>confdefs.h <<_ACEOF
@@ -2170,10 +2060,10 @@
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program
name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_STRIP+set}" = set; then
- $as_echo_n "(cached) " >&6
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$STRIP"; then
ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
@@ -2186,7 +2076,7 @@
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
@@ -2197,11 +2087,11 @@
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
+ { echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
@@ -2210,10 +2100,10 @@
ac_ct_STRIP=$STRIP
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
- $as_echo_n "(cached) " >&6
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$ac_ct_STRIP"; then
ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
@@ -2226,7 +2116,7 @@
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_STRIP="strip"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
@@ -2237,11 +2127,11 @@
fi
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
+ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
if test "x$ac_ct_STRIP" = x; then
@@ -2249,8 +2139,12 @@
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host
triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet"
>&2;}
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect
cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to address@hidden" >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to address@hidden" >&2;}
ac_tool_warned=yes ;;
esac
STRIP=$ac_ct_STRIP
@@ -2269,8 +2163,8 @@
AMTAR=${AMTAR-"${am_missing_run}tar"}
-{ $as_echo "$as_me:$LINENO: checking how to create a pax tar archive" >&5
-$as_echo_n "checking how to create a pax tar archive... " >&6; }
+{ echo "$as_me:$LINENO: checking how to create a pax tar archive" >&5
+echo $ECHO_N "checking how to create a pax tar archive... $ECHO_C" >&6; }
# Loop over all known methods to create a tar archive until one works.
_am_tools='gnutar pax cpio none'
_am_tools=${am_cv_prog_tar_pax-$_am_tools}
@@ -2343,21 +2237,21 @@
rm -rf conftest.dir
if test "${am_cv_prog_tar_pax+set}" = set; then
- $as_echo_n "(cached) " >&6
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
am_cv_prog_tar_pax=$_am_tool
fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_prog_tar_pax" >&5
-$as_echo "$am_cv_prog_tar_pax" >&6; }
+{ echo "$as_me:$LINENO: result: $am_cv_prog_tar_pax" >&5
+echo "${ECHO_T}$am_cv_prog_tar_pax" >&6; }
-{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific
portions of Makefiles" >&5
-$as_echo_n "checking whether to enable maintainer-specific portions of
Makefiles... " >&6; }
+{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific
portions of Makefiles" >&5
+echo $ECHO_N "checking whether to enable maintainer-specific portions of
Makefiles... $ECHO_C" >&6; }
# Check whether --enable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
@@ -2365,8 +2259,8 @@
USE_MAINTAINER_MODE=no
fi
- { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
-$as_echo "$USE_MAINTAINER_MODE" >&6; }
+ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
if test $USE_MAINTAINER_MODE = yes; then
MAINTAINER_MODE_TRUE=
MAINTAINER_MODE_FALSE='#'
@@ -2385,10 +2279,10 @@
# Extract the first word of "perl", so it can be a program name with args.
set dummy perl; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_path_PERL+set}" = set; then
- $as_echo_n "(cached) " >&6
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
case $PERL in
[\\/]* | ?:[\\/]*)
@@ -2404,7 +2298,7 @@
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
@@ -2417,11 +2311,11 @@
fi
PERL=$ac_cv_path_PERL
if test -n "$PERL"; then
- { $as_echo "$as_me:$LINENO: result: $PERL" >&5
-$as_echo "$PERL" >&6; }
+ { echo "$as_me:$LINENO: result: $PERL" >&5
+echo "${ECHO_T}$PERL" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
@@ -2511,12 +2405,11 @@
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
if test -z "$INSTALL"; then
if test "${ac_cv_path_install+set}" = set; then
- $as_echo_n "(cached) " >&6
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -2545,29 +2438,17 @@
# program-specific install script used by HP pwplus--don't use.
:
else
- rm -rf conftest.one conftest.two conftest.dir
- echo one > conftest.one
- echo two > conftest.two
- mkdir conftest.dir
- if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two
"`pwd`/conftest.dir" &&
- test -s conftest.one && test -s conftest.two &&
- test -s conftest.dir/conftest.one &&
- test -s conftest.dir/conftest.two
- then
ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
break 3
fi
fi
- fi
done
done
;;
esac
-
done
IFS=$as_save_IFS
-rm -rf conftest.one conftest.two conftest.dir
fi
if test "${ac_cv_path_install+set}" = set; then
@@ -2580,8 +2461,8 @@
INSTALL=$ac_install_sh
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
@@ -2599,34 +2480,34 @@
# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL
$ac_aux_dir/config.sub" >&5
-$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
+ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub"
>&5
+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
{ (exit 1); exit 1; }; }
-{ $as_echo "$as_me:$LINENO: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
+{ echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
if test "${ac_cv_build+set}" = set; then
- $as_echo_n "(cached) " >&6
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_build_alias=$build_alias
test "x$ac_build_alias" = x &&
ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
test "x$ac_build_alias" = x &&
- { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must
specify one" >&5
-$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify
one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
{ (exit 1); exit 1; }; }
ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub
$ac_build_alias failed" >&5
-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed"
>&2;}
+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub
$ac_build_alias failed" >&5
+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed"
>&2;}
{ (exit 1); exit 1; }; }
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6; }
case $ac_cv_build in
*-*-*) ;;
-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-$as_echo "$as_me: error: invalid value of canonical build" >&2;}
+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
+echo "$as_me: error: invalid value of canonical build" >&2;}
{ (exit 1); exit 1; }; };;
esac
build=$ac_cv_build
@@ -2643,27 +2524,27 @@
case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-{ $as_echo "$as_me:$LINENO: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
+{ echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
if test "${ac_cv_host+set}" = set; then
- $as_echo_n "(cached) " >&6
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "x$host_alias" = x; then
ac_cv_host=$ac_cv_build
else
ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub
$host_alias failed" >&5
-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed"
>&2;}
+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias
failed" >&5
+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
{ (exit 1); exit 1; }; }
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6; }
case $ac_cv_host in
*-*-*) ;;
-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-$as_echo "$as_me: error: invalid value of canonical host" >&2;}
+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
+echo "$as_me: error: invalid value of canonical host" >&2;}
{ (exit 1); exit 1; }; };;
esac
host=$ac_cv_host
@@ -2725,12 +2606,11 @@
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var
contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains
a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
*) $as_unset $ac_var ;;
esac ;;
esac
@@ -2763,12 +2643,12 @@
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
if test -w "$cache_file"; then
test "x$cache_file" != "x/dev/null" &&
- { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
+echo "$as_me: updating cache $cache_file" >&6;}
cat confcache >$cache_file
else
- { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
fi
fi
rm -f confcache
@@ -2785,12 +2665,6 @@
# take arguments), then branch to the quote section. Otherwise,
# look for a macro that doesn't take arguments.
ac_script='
-:mline
-/\\$/{
- N
- s,\\\n,,
- b mline
-}
t clear
:clear
s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[
]*\(.*\)/-D\1=\2/g
@@ -2820,7 +2694,7 @@
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ ac_i=`echo "$ac_i" | sed "$ac_script"`
# 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
# will be set to the directory where LIBOBJS objects are built.
ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
@@ -2832,20 +2706,19 @@
if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}";
then
- { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was
never defined.
+ { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never
defined.
Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
+echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
: ${CONFIG_STATUS=./config.status}
-ac_write_fail=0
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
@@ -2858,7 +2731,7 @@
SHELL=\${CONFIG_SHELL-$SHELL}
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+cat >>$CONFIG_STATUS <<\_ACEOF
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
@@ -2868,7 +2741,7 @@
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
@@ -2890,45 +2763,17 @@
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo";
then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
PATH_SEPARATOR=';'
- }
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
fi
# Support unset when possible.
@@ -2944,6 +2789,8 @@
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
+as_nl='
+'
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
@@ -2966,7 +2813,7 @@
as_myself=$0
fi
if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file
name" >&2
+ echo "$as_myself: error: cannot find myself; rerun with an absolute file
name" >&2
{ (exit 1); exit 1; }
fi
@@ -2979,10 +2826,17 @@
PS4='+ '
# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ fi
+done
# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1 &&
@@ -3004,7 +2858,7 @@
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
+echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
@@ -3055,7 +2909,7 @@
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX
shell" >&2
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX
shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
@@ -3083,6 +2937,7 @@
*)
ECHO_N='-n';;
esac
+
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
@@ -3095,10 +2950,10 @@
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
+ mkdir conf$$.dir
fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
as_ln_s='ln -s'
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
@@ -3106,11 +2961,8 @@
# In both cases, we have to default to `cp -p'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -p'
- elif ln conf$$.file conf$$ 2>/dev/null; then
+elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
else
as_ln_s='cp -p'
fi
@@ -3160,8 +3012,8 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by texi2html $as_me 1.79, which was
-generated by GNU Autoconf 2.63. Invocation command line was
+This file was extended by texi2html $as_me 1.80, which was
+generated by GNU Autoconf 2.61. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -3174,29 +3026,22 @@
_ACEOF
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>$CONFIG_STATUS <<_ACEOF
# Files that config.status was made for.
config_files="$ac_config_files"
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+cat >>$CONFIG_STATUS <<\_ACEOF
ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.
-Usage: $0 [OPTION]... [FILE]...
+Usage: $0 [OPTIONS] [FILE]...
-h, --help print this help, then exit
-V, --version print version number and configuration settings, then exit
- -q, --quiet, --silent
- do not print progress messages
+ -q, --quiet do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
--file=FILE[:TEMPLATE]
@@ -3208,13 +3053,13 @@
Report bugs to <address@hidden>."
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
-texi2html config.status 1.79
-configured by $0, generated by GNU Autoconf 2.63,
- with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //;
s/[\\""\`\$]/\\\\&/g'`\\"
+texi2html config.status 1.80
+configured by $0, generated by GNU Autoconf 2.61,
+ with options \\"`echo "$ac_configure_args" | sed 's/^ //;
s/[\\""\`\$]/\\\\&/g'`\\"
-Copyright (C) 2008 Free Software Foundation, Inc.
+Copyright (C) 2006 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
@@ -3222,12 +3067,11 @@
srcdir='$srcdir'
INSTALL='$INSTALL'
MKDIR_P='$MKDIR_P'
-AWK='$AWK'
-test -n "\$AWK" || AWK=awk
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value. By we need to know if files were specified by the user.
ac_need_defaults=:
while test $# != 0
do
@@ -3249,24 +3093,21 @@
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
ac_cs_recheck=: ;;
--version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- $as_echo "$ac_cs_version"; exit ;;
+ echo "$ac_cs_version"; exit ;;
--debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
ac_need_defaults=false;;
--he | --h | --help | --hel | -h )
- $as_echo "$ac_cs_usage"; exit ;;
+ echo "$ac_cs_usage"; exit ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil | --si | --s)
ac_cs_silent=: ;;
# This is an error.
- -*) { $as_echo "$as_me: error: unrecognized option: $1
+ -*) { echo "$as_me: error: unrecognized option: $1
Try \`$0 --help' for more information." >&2
{ (exit 1); exit 1; }; } ;;
@@ -3285,32 +3126,30 @@
fi
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>$CONFIG_STATUS <<_ACEOF
if \$ac_cs_recheck; then
- set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create
--no-recursion
- shift
- \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
- CONFIG_SHELL='$SHELL'
+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args
\$ac_configure_extra_args " --no-create --no-recursion" >&6
+ CONFIG_SHELL=$SHELL
export CONFIG_SHELL
- exec "\$@"
+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create
--no-recursion
fi
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+cat >>$CONFIG_STATUS <<\_ACEOF
exec 5>>config.log
{
echo
sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
- $as_echo "$ac_log"
+ echo "$ac_log"
} >&5
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>$CONFIG_STATUS <<_ACEOF
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+cat >>$CONFIG_STATUS <<\_ACEOF
# Handling of arguments.
for ac_config_target in $ac_config_targets
@@ -3344,8 +3183,8 @@
"test/many_input_files/Makefile") CONFIG_FILES="$CONFIG_FILES
test/many_input_files/Makefile" ;;
"doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
- *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target"
>&5
-$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ (exit 1); exit 1; }; };;
esac
done
@@ -3384,143 +3223,142 @@
(umask 077 && mkdir "$tmp")
} ||
{
- $as_echo "$as_me: cannot create a temporary directory in ." >&2
+ echo "$me: cannot create a temporary directory in ." >&2
{ (exit 1); exit 1; }
}
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
+#
+# Set up the sed scripts for CONFIG_FILES section.
+#
-ac_cr='
'
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\\r'
-else
- ac_cs_awk_cr=$ac_cr
-fi
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "$CONFIG_FILES"; then
-echo 'BEGIN {' >"$tmp/subs1.awk" &&
_ACEOF
-{
- echo "cat >conf$$subs.awk <<_ACEOF" &&
- echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
- echo "_ACEOF"
-} >conf$$subs.sh ||
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
- . ./conf$$subs.sh ||
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
+ cat >conf$$subs.sed <<_ACEOF
+SHELL!$SHELL$ac_delim
+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
+exec_prefix!$exec_prefix$ac_delim
+prefix!$prefix$ac_delim
+program_transform_name!$program_transform_name$ac_delim
+bindir!$bindir$ac_delim
+sbindir!$sbindir$ac_delim
+libexecdir!$libexecdir$ac_delim
+datarootdir!$datarootdir$ac_delim
+datadir!$datadir$ac_delim
+sysconfdir!$sysconfdir$ac_delim
+sharedstatedir!$sharedstatedir$ac_delim
+localstatedir!$localstatedir$ac_delim
+includedir!$includedir$ac_delim
+oldincludedir!$oldincludedir$ac_delim
+docdir!$docdir$ac_delim
+infodir!$infodir$ac_delim
+htmldir!$htmldir$ac_delim
+dvidir!$dvidir$ac_delim
+pdfdir!$pdfdir$ac_delim
+psdir!$psdir$ac_delim
+libdir!$libdir$ac_delim
+localedir!$localedir$ac_delim
+mandir!$mandir$ac_delim
+DEFS!$DEFS$ac_delim
+ECHO_C!$ECHO_C$ac_delim
+ECHO_N!$ECHO_N$ac_delim
+ECHO_T!$ECHO_T$ac_delim
+LIBS!$LIBS$ac_delim
+build_alias!$build_alias$ac_delim
+host_alias!$host_alias$ac_delim
+target_alias!$target_alias$ac_delim
+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
+INSTALL_DATA!$INSTALL_DATA$ac_delim
+am__isrc!$am__isrc$ac_delim
+CYGPATH_W!$CYGPATH_W$ac_delim
+PACKAGE!$PACKAGE$ac_delim
+VERSION!$VERSION$ac_delim
+ACLOCAL!$ACLOCAL$ac_delim
+AUTOCONF!$AUTOCONF$ac_delim
+AUTOMAKE!$AUTOMAKE$ac_delim
+AUTOHEADER!$AUTOHEADER$ac_delim
+MAKEINFO!$MAKEINFO$ac_delim
+install_sh!$install_sh$ac_delim
+STRIP!$STRIP$ac_delim
+INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
+mkdir_p!$mkdir_p$ac_delim
+AWK!$AWK$ac_delim
+SET_MAKE!$SET_MAKE$ac_delim
+am__leading_dot!$am__leading_dot$ac_delim
+AMTAR!$AMTAR$ac_delim
+am__tar!$am__tar$ac_delim
+am__untar!$am__untar$ac_delim
+MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
+MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
+MAINT!$MAINT$ac_delim
+PACKAGE_DATE!$PACKAGE_DATE$ac_delim
+PERL!$PERL$ac_delim
+USE_UNICODE!$USE_UNICODE$ac_delim
+USE_UNIDECODE!$USE_UNIDECODE$ac_delim
+USE_DATA_DUMPER!$USE_DATA_DUMPER$ac_delim
+REQUIRE_DATA_DUMPER!$REQUIRE_DATA_DUMPER$ac_delim
+build!$build$ac_delim
+build_cpu!$build_cpu$ac_delim
+build_vendor!$build_vendor$ac_delim
+build_os!$build_os$ac_delim
+host!$host$ac_delim
+host_cpu!$host_cpu$ac_delim
+host_vendor!$host_vendor$ac_delim
+host_os!$host_os$ac_delim
+LIBOBJS!$LIBOBJS$ac_delim
+LTLIBOBJS!$LTLIBOBJS$ac_delim
+_ACEOF
- ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
- if test $ac_delim_n = $ac_delim_num; then
+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 78; then
break
elif $ac_last_try; then
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
{ (exit 1); exit 1; }; }
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
done
-rm -f conf$$subs.sh
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+ ac_eof=`expr $ac_eof + 1`
+fi
+
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+_ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+:end
+s/|#_!!_#|//g
+CEOF$ac_eof
_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\).*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\).*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
- N
- s/\n//
-}
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$tmp/subs1.awk" <<_ACAWK &&
- for (key in S) S_is_set[key] = 1
- FS = ""
-
-}
-{
- line = $ 0
- nfields = split(line, field, "@")
- substed = 0
- len = length(field[1])
- for (i = 2; i < nfields; i++) {
- key = field[i]
- keylen = length(key)
- if (S_is_set[key]) {
- value = S[key]
- line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
- len += length(value) + length(field[++i])
- substed = 1
- } else
- len += 1 + keylen
- }
-
- print line
-}
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
- sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
- cat
-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
- || { { $as_echo "$as_me:$LINENO: error: could not setup config files
machinery" >&5
-$as_echo "$as_me: error: could not setup config files machinery" >&2;}
- { (exit 1); exit 1; }; }
-_ACEOF
# VPATH may cause trouble with some makes, so we remove $(srcdir),
# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
@@ -3537,21 +3375,19 @@
}'
fi
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+cat >>$CONFIG_STATUS <<\_ACEOF
fi # test -n "$CONFIG_FILES"
-eval set X " :F $CONFIG_FILES "
-shift
-for ac_tag
+for ac_tag in :F $CONFIG_FILES
do
case $ac_tag in
:[FHLC]) ac_mode=$ac_tag; continue;;
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
- :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
-$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
{ (exit 1); exit 1; }; };;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
@@ -3580,38 +3416,26 @@
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
- { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f"
>&5
-$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
{ (exit 1); exit 1; }; };;
esac
- case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;;
esac
- ac_file_inputs="$ac_file_inputs '$ac_f'"
+ ac_file_inputs="$ac_file_inputs $ac_f"
done
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
- configure_input='Generated from '`
- $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
- `' by configure.'
+ configure_input="Generated from "`IFS=:
+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
if test x"$ac_file" != x-; then
configure_input="$ac_file. $configure_input"
- { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
fi
- # Neutralize special characters interpreted by sed in replacement strings.
- case $configure_input in #(
- *\&* | *\|* | *\\* )
- ac_sed_conf_input=`$as_echo "$configure_input" |
- sed 's/[\\\\&|]/\\\\&/g'`;; #(
- *) ac_sed_conf_input=$configure_input;;
- esac
case $ac_tag in
- *:-:* | *:-) cat >"$tmp/stdin" \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; } ;;
+ *:-:* | *:-) cat >"$tmp/stdin";;
esac
;;
esac
@@ -3621,7 +3445,7 @@
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
+echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
@@ -3647,7 +3471,7 @@
as_dirs=
while :; do
case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
*) as_qdir=$as_dir;;
esac
as_dirs="'$as_qdir' $as_dirs"
@@ -3656,7 +3480,7 @@
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
+echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
@@ -3677,17 +3501,17 @@
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create
directory $as_dir" >&5
-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create
directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
{ (exit 1); exit 1; }; }; }
ac_builddir=.
case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed
's|/[^\\/]*|/..|g;s|/||'`
+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
@@ -3732,13 +3556,12 @@
esac
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+cat >>$CONFIG_STATUS <<\_ACEOF
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
+case `sed -n '/datarootdir/ {
p
q
}
@@ -3747,14 +3570,13 @@
/@infodir@/p
/@localedir@/p
/@mandir@/p
-'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+' $ac_file_inputs` in
*datarootdir*) ac_datarootdir_seen=yes;;
address@hidden@*|address@hidden@*|address@hidden@*|address@hidden@*|address@hidden@*)
- { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the
--datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir
setting" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the
--datarootdir setting" >&5
+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir
setting" >&2;}
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>$CONFIG_STATUS <<_ACEOF
ac_datarootdir_hack='
s&@datadir@&$datadir&g
s&@docdir@&$docdir&g
@@ -3768,16 +3590,15 @@
# Neutralize VPATH when `$srcdir' = `.'.
# Shell code in configure.ac might set extrasub.
# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
+cat >>$CONFIG_STATUS <<_ACEOF
+ sed "$ac_vpsub
$extrasub
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+cat >>$CONFIG_STATUS <<\_ACEOF
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
+s&@configure_input@&$configure_input&;t t
s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
s&@srcdir@&$ac_srcdir&;t t
s&@abs_srcdir@&$ac_abs_srcdir&;t t
s&@top_srcdir@&$ac_top_srcdir&;t t
@@ -3788,28 +3609,21 @@
s&@INSTALL@&$ac_INSTALL&;t t
s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk"
>$tmp/out \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; }
+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
{ ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
{ ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z
"$ac_out"; } &&
- { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the
variable \`datarootdir'
+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the
variable \`datarootdir'
which seems to be undefined. Please make sure it is defined." >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable
\`datarootdir'
+echo "$as_me: WARNING: $ac_file contains a reference to the variable
\`datarootdir'
which seems to be undefined. Please make sure it is defined." >&2;}
rm -f "$tmp/stdin"
case $ac_file in
- -) cat "$tmp/out" && rm -f "$tmp/out";;
- *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
- esac \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; }
+ -) cat "$tmp/out"; rm -f "$tmp/out";;
+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
+ esac
;;
@@ -3831,11 +3645,6 @@
chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save
-test $ac_write_fail = 0 ||
- { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS"
>&5
-$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
-
# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
@@ -3857,8 +3666,4 @@
# would make configure fail if this is the last instruction.
$ac_cs_success || { (exit 1); exit 1; }
fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no;
then
- { $as_echo "$as_me:$LINENO: WARNING: unrecognized options:
$ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
Index: configure.ac
===================================================================
RCS file: /cvsroot/texi2html/texi2html/configure.ac,v
retrieving revision 1.15
retrieving revision 1.16
diff -u -b -r1.15 -r1.16
--- configure.ac 1 Sep 2008 14:48:24 -0000 1.15
+++ configure.ac 2 Jan 2009 04:02:31 -0000 1.16
@@ -1,6 +1,6 @@
dnl Process this file with autoconf to produce a configure script.
AC_PREREQ(2.53)
-AC_INIT([texi2html], [1.79], address@hidden)
+AC_INIT([texi2html], [1.80], address@hidden)
dnl 1.9 because we need tar-pax, and tar-pax because we have very long
dnl filenames for some test files
AM_INIT_AUTOMAKE([gnu 1.9 dist-bzip2 dist-zip tar-pax])
Index: texi2html.spec
===================================================================
RCS file: /cvsroot/texi2html/texi2html/texi2html.spec,v
retrieving revision 1.11
retrieving revision 1.12
diff -u -b -r1.11 -r1.12
--- texi2html.spec 10 Sep 2007 20:53:51 -0000 1.11
+++ texi2html.spec 2 Jan 2009 04:02:32 -0000 1.12
@@ -1,5 +1,5 @@
Name: texi2html
-Version: 1.79
+Version: 1.80
Release: 1
# GPLv2+ is for the code
# OFSFDL (Old FSF Documentation License) for the documentation
@@ -75,8 +75,8 @@
%dir %{_sysconfdir}/texinfo
%changelog
-* Sun Sep 9 2007 Patrice Dumas <address@hidden> 1.79-1
-- update to 1.79
+* Sun Sep 9 2007 Patrice Dumas <address@hidden> 1.80-1
+- update to 1.80
* Mon Nov 14 2005 Patrice Dumas <address@hidden> 1.77-1
- cleanups
Index: translations.pl
===================================================================
RCS file: /cvsroot/texi2html/texi2html/translations.pl,v
retrieving revision 1.21
retrieving revision 1.22
diff -u -b -r1.21 -r1.22
--- translations.pl 29 Aug 2008 15:05:44 -0000 1.21
+++ translations.pl 2 Jan 2009 04:02:32 -0000 1.22
@@ -1,337 +1,137 @@
-$LANGUAGES->{'fr'} = {
- ' The buttons in the navigation panels have the
following meaning:' => ' Les boutons de navigation ont la signification
suivante :',
- ' where the @strong{ Example } assumes that the
current position is at @strong{ Subsubsection One-Two-Three } of a document of
the following structure:' => ' Dans cet exemple on est @`a @strong{ Sous sous
section un-deux-trois } dans un document dont la structure est :',
- ' Up ' => 'Plus haut',
- '%{acronym_like} (%{explanation})' => '',
- '%{month} %{day}, %{year}' => 'le %{day} %{month}
%{year}',
- '%{name} of %{class}' => '%{name} de %{class}',
- '%{name} on %{class}' => '%{name} de %{class}',
+$LANGUAGES->{'de'} = {
+ ' The buttons in the navigation panels have the
following meaning:' => ' Die Links in der Navigationsleiste haben die folgende
Bedeutung: ',
+ ' where the @strong{ Example } assumes that the
current position is at @strong{ Subsubsection One-Two-Three } of a document of
the following structure:' => ' wobei das @strong{ Beispiel } annimmt, dass die
aktuelle Position bei @strong{ Unterabschnitt 1-2-3 } in einem Dokument mit
folgender Struktur liegt:',
+ ' Up ' => ' Nach oben ',
+ '%{acronym_like} (%{explanation})' => '%{acronym_like}
(%{explanation})',
+ '%{month} %{day}, %{year}' => '%{day}. %{month}
%{year}',
+ '%{name} of %{class}' => '',
+ '%{name} on %{class}' => '',
'%{node_file_href}' => '',
'%{node_file_href} @cite{%{book}}' => '',
- '%{node_file_href} section `%{section}\' in
@cite{%{book}}' => '%{node_file_href} section `%{section}\' dans
@cite{%{book}}',
- '%{reference_name}' => '',
- '%{style} %{number}' => '',
- '%{style}: %{caption_first_line}' => '',
- '%{style}: %{shortcaption_first_line}' => '',
- '@b{%{quotation_arg}:} ' => '',
- '@cite{%{book}}' => '',
- 'About' => 'A propos',
- 'About (help)' => 'A propos (page d\'aide)',
- 'About This Document' => 'A propos de ce document',
- 'April' => 'avril',
- 'August' => 'address@hidden',
- 'Back' => 'Retour',
+ '%{node_file_href} section `%{section}\' in
@cite{%{book}}' => '%{node_file_href} in Abschnitt `%{section}\' in
@cite{%{book}}',
+ '%{reference_name}' => '%{reference_name}',
+ '%{style} %{number}' => '%{style} %{number}',
+ '%{style}: %{caption_first_line}' => '%{style}:
%{caption_first_line}',
+ '%{style}: %{shortcaption_first_line}' => '%{style}:
%{shortcaption_first_line}',
+ '@b{%{quotation_arg}:} ' => '@b{%{quotation_arg}:} ',
+ '@cite{%{book}}' => '@cite{%{book}}',
+ 'About' => '@"Uber',
+ 'About (help)' => '@"Uber (Hilfe)',
+ 'About This Document' => '@"Uber dieses Dokument',
+ 'April' => 'April',
+ 'August' => 'August',
+ 'Back' => 'Zur@"uck',
'Back section in previous file' => '',
- 'Beginning of this chapter or previous chapter' =>
'address@hidden'ebut de ce chapitre ou chapitre
address@hidden'address@hidden'edent',
- 'Button' => 'Bouton',
- 'Contents' => 'Table des address@hidden',
- 'Cover (top) of document' => 'Couverture (top) du
document',
- 'Current Position' => 'Position',
- 'Current section' => 'Section actuelle',
- 'December' => 'address@hidden'ecembre',
- 'FastBack' => 'RetourRapide',
- 'FastForward' => 'AvanceRapide',
- 'February' => 'address@hidden'evrier',
- 'First' => 'Premier',
- 'First section in reading order' => 'address@hidden
section dans l\'ordre de lecture',
- 'Following' => 'Suivant',
- 'Following node' => 'address@hidden suivant',
- 'Footnotes' => 'Notes de bas de page',
- 'Forward' => 'Avant',
+ 'Beginning of this chapter or previous chapter' =>
'Anfang dieses oder des letzten Kapitels',
+ 'Button' => '',
+ 'Contents' => 'Inhalt',
+ 'Cover (top) of document' => 'Titelseite des Dokuments',
+ 'Current Position' => 'Aktuelle Position',
+ 'Current section' => 'Aktueller Abschnitt',
+ 'December' => 'Dezember',
+ 'FastBack' => '',
+ 'FastForward' => '',
+ 'February' => 'Februar',
+ 'First' => '',
+ 'First section in reading order' => 'Erster Abschnitt
in Lesereihenfolge',
+ 'Following' => '',
+ 'Following node' => 'N@"achster Knoten',
+ 'Footnotes' => 'address@hidden',
+ 'Forward' => 'Nach vorne',
'Forward section in next file' => '',
- 'From 1.2.3 go to' => 'Depuis 1.2.3 aller @`a',
- 'Go to' => 'Aller @`a',
+ 'From 1.2.3 go to' => 'Von 1.2.3 gehe zu',
+ 'Go to' => 'Gehe zu',
'Index' => 'Index',
- 'Index Entry' => 'address@hidden'ee d\'index',
- 'January' => 'janvier',
- 'July' => 'juillet',
- 'Jump to' => 'Aller @`a',
- 'June' => 'juin',
- 'Last' => 'Dernier',
- 'Last section in reading order' => 'address@hidden
section dans l\'ordre de lecture',
- 'March' => 'mars',
- 'May' => 'mai',
- 'Menu:' => 'Menu@ :',
- 'Name' => 'Nom',
- 'Next' => 'Suivant',
- 'Next chapter' => 'Chapitre suivant',
- 'Next file' => 'Fichier suivant',
- 'Next node' => 'address@hidden suivant',
- 'Next section in reading order' => 'Section suivante
dans l\'ordre de lecture',
- 'Next section on same level' => 'Section suivante au
address@hidden niveau',
- 'NextFile' => 'FichierSuivant',
- 'Node following in node reading order' =>
'address@hidden suivant dans l\'ordre de lecture',
- 'Node up' => 'address@hidden au dessus',
- 'NodeNext' => 'address@hidden',
- 'NodePrev' => 'address@hidden@\'address@hidden'edent',
- 'NodeUp' => 'address@hidden',
- 'November' => 'novembre',
- 'October' => 'octobre',
- 'Overview' => 'Vue d\'ensemble',
- 'Overview:' => 'Vue d\'ensemble@ :',
- 'Prev' => 'address@hidden'address@hidden'edent',
- 'PrevFile' => '',
- 'Previous file' => 'Fichier
address@hidden'address@hidden'edent',
- 'Previous node' => 'address@hidden
address@hidden'address@hidden'edent',
- 'Previous section in reading order' => 'Section
address@hidden'address@hidden'edente dans l\'ordre de lecture',
- 'Previous section on same level' => 'Section
address@hidden'address@hidden'edente au address@hidden niveau',
- 'Section' => '',
- 'Section One' => 'Section un',
- 'See %{node_file_href}' => 'Voir %{node_file_href}',
- 'See %{node_file_href} @cite{%{book}}' => 'Voir
%{node_file_href} @cite{%{book}}',
- 'See %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'Voir %{node_file_href} section `%{section}\' dans
@cite{%{book}}',
- 'See %{reference_name}' => 'Voir %{reference_name}',
- 'See @cite{%{book}}' => 'Voir @cite{%{book}}',
- 'See section %{reference_name}' => 'Voir la section
%{reference_name}',
- 'See section `%{section}\' in @cite{%{book}}' => 'Voir
la section `%{section}\' dans @cite{%{book}}',
- 'September' => 'septembre',
- 'Short Table of Contents' =>
'address@hidden'address@hidden'e du contenu',
- 'Short table of contents' =>
'address@hidden'address@hidden'e du contenu',
- 'Subsection One-Four' => 'Sous section un-quatre',
- 'Subsection One-One' => 'Sous section un-un',
- 'Subsection One-Three' => 'Sous section un-trois',
- 'Subsection One-Two' => 'Sous section un-deux',
- 'Subsubsection One-Two-Four' => 'Sous sous section
un-deux-quatre',
- 'Subsubsection One-Two-One' => 'Sous sous section
un-deux-un',
- 'Subsubsection One-Two-Three' => 'Sous sous section
un-deux-trois',
- 'Subsubsection One-Two-Two' => 'Sous sous section
un-deux-deux',
- 'T2H_today' => '%2$d %1$s %3$d',
- 'Table of Contents' => 'Table des address@hidden',
- 'Table of contents' => 'Table des address@hidden',
- 'The node you are looking for is at %{href}.' => 'Le
address@hidden que vous recherchez est ici@ : %{href}.',
- 'This' => 'Ici',
- 'This document was generated by @emph{%{user}} on
@emph{%{date}} using @uref{%{program_homepage}, @emph{%{program}}}.' => 'Ce
document a @\'address@hidden'e address@hidden'address@hidden'address@hidden'e
le @emph{%{date}} par @emph{%{user}} en utilisant @uref{%{program_homepage},
@emph{%{program}}}.',
- 'This document was generated by @emph{%{user}} using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Ce document a
@\'address@hidden'e address@hidden'address@hidden'address@hidden'e par
@emph{%{user}} en utilisant @uref{%{program_homepage}, @emph{%{program}}}.',
- 'This document was generated on @i{%{date}} using
@uref{%{program_homepage}, @i{%{program}}}.' => 'Ce document a
@\'address@hidden'e address@hidden'address@hidden'address@hidden'e le
@emph{%{date}} en utilisant @uref{%{program_homepage}, @emph{%{program}}}',
- 'This document was generated using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Ce document a
@\'address@hidden'e address@hidden'address@hidden'address@hidden'e en utilisant
@uref{%{program_homepage}, @emph{%{program}}}.',
- 'Top' => 'Racine',
- 'Untitled Document' => 'Document sans titre',
- 'Up' => 'Monter',
- 'Up node' => 'address@hidden au dessus',
- 'Up section' => 'Section address@hidden'erieure',
- 'by @emph{%{user}}' => 'par @emph{%{user}}',
- 'by @emph{%{user}} on @emph{%{date}}' => 'par
@emph{%{user}} le @emph{%{date}}',
- 'current' => 'courante',
- 'on @emph{%{date}}' => 'le @emph{%{date}}',
- 'section `%{section}\' in @cite{%{book}}' => 'section
`%{section}\' dans @cite{%{book}}',
- 'see %{node_file_href}' => 'voir %{node_file_href}',
- 'see %{node_file_href} @cite{%{book}}' => 'voir
%{node_file_href} @cite{%{book}}',
- 'see %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'voir %{node_file_href} section `%{section}\' dans
@cite{%{book}}',
- 'see %{reference_name}' => 'voir %{reference_name}',
- 'see @cite{%{book}}' => 'voir @cite{%{book}}',
- 'see section %{reference_name}' => 'voir la section
%{reference_name}',
- 'see section `%{section}\' in @cite{%{book}}' => 'voir
la section `%{section}\' dans @cite{{book}}',
- 'unknown' => 'inconnu'
- };
-
-$T2H_OBSOLETE_STRINGS->{'fr'} = {
- ' This document was generated
%{who_and_when_generated} using %{program_homepage_href}.' => ' Ce document a
été généré %{who_and_when_generated} en
utilisant %{program_homepage_href}.',
- ' where the <strong> Example </strong>
assumes that the current position is at <strong> Subsubsection One-Two-Three
</strong> of a document of the following structure:' => ' Dans cet exemple on
est à <strong> Sous section un-deux-trois </strong> dans un document
dont la structure est :',
- '%{node_file_href} section `%{section}\' in
<cite>%{book}</cite>' => '%{node_file_href} section `%{section}\' dans
<cite>%{book}</cite>',
- 'See' => 'Voir',
- 'See %{node_file_href} <cite>%{book}</cite>'
=> 'Voir %{node_file_href} <cite>%{book}</cite>',
- 'See %{node_file_href} section `%{section}\'
in <cite>%{book}</cite>' => 'Voir %{node_file_href} section `%{section}\' dans
<cite>%{book}</cite>',
- 'See <cite>%{book}</cite>' => 'Voir
<cite>%{book}</cite>',
- 'See section `%{section}\' in
<cite>%{book}</cite>' => 'Voir la section `%{section}\' dans
<cite>%{book}</cite>',
- 'This document was generated by
<i>%{user}</i> on <i>%{date}</i> using %{program_homepage_href}.' => 'Ce
document a été généré par <i>%{user}</i>
<i>%{date}</i> en utilisant %{program_homepage_href}.',
- 'This document was generated by
<i>%{user}</i> using %{program_homepage_href}.' => 'Ce document a
été généré par <i>%{user}</i> en utilisant
%{program_homepage_href}.',
- 'This document was generated by
@emph{%{user}} on @emph{%{date}} using %{program_homepage_href}.' => 'Ce
document a @\'address@hidden'e address@hidden'address@hidden'address@hidden'e
par @emph{%{user}} @emph{%{date}} en utilisant %{program_homepage_href}.',
- 'This document was generated by
@emph{%{user}} using %{program_homepage_href}.' => 'Ce document a
@\'address@hidden'e address@hidden'address@hidden'address@hidden'e par
@emph{%{user}} en utilisant %{program_homepage_href}.',
- 'This document was generated on
<i>%{date}</i> using %{program_homepage_href}.' => 'Ce document a
été généré <i>%{date}</i> en utilisant
%{program_homepage_href}.',
- 'This document was generated on
@emph{%{date}} using %{program_homepage_href}.' => 'Ce document a
@\'address@hidden'e address@hidden'address@hidden'address@hidden'e
@emph{%{date}} en utilisant %{program_homepage_href}.',
- 'This document was generated on
@emph{%{date}} using @uref{%{program_homepage}, @emph{%{program}}}.' => 'Ce
document a @\'address@hidden'e address@hidden'address@hidden'address@hidden'e
@emph{%{date}} en utilisant @uref{%{program_homepage}, @emph{%{program}}}.',
- 'This document was generated using
%{program_homepage_href}.' => 'Ce document a @\'address@hidden'e
address@hidden'address@hidden'address@hidden'e en utilisant
%{program_homepage_href}.',
- 'about (help)' => '@`a propos (page
d\'aide)',
- 'about (this page)' => 'a propos (cette
page)',
- 'beginning of this chapter or previous
chapter' => 'address@hidden'ebut de ce chapitre ou chapitre
address@hidden'address@hidden'edent',
- 'by <i>%{user}</i>' => 'par <i>%{user}</i>',
- 'by <i>%{user}</i> on <i>%{date}</i>' =>
'par <i>%{user}</i> <i>%{date}</i>',
- 'concept index' => 'index',
- 'cover (top) of document' => 'couverture
(top) du document',
- 'current section' => 'section actuelle',
- 'first section in reading order' =>
'address@hidden section dans l\'ordre de lecture',
- 'following node' => 'node suivant',
- 'index' => 'index',
- 'last section in reading order' =>
'address@hidden section dans l\'ordre de lecture',
- 'next chapter' => 'chapitre suivant',
- 'next node' => 'node suivant',
- 'next section in reading order' => 'section
suivante dans l\'ordre de lecture',
- 'next section on same level' => 'section
suivante au address@hidden niveau',
- 'node following in node reading order' =>
'node suivant dans l\'ordre des nodes',
- 'node up' => 'node au dessus',
- 'on <i>%{date}</i>' => '<i>%{date}</i>',
- 'previous node' => 'node
address@hidden'address@hidden'edent',
- 'previous section in reading order' =>
'section address@hidden'address@hidden'edente dans l\'ordre de lecture',
- 'previous section on same level' => 'section
address@hidden'address@hidden'edente au address@hidden niveau',
- 'section' => 'section',
- 'section `%{section}\' in
<cite>%{book}</cite>' => 'section `%{section}\' dans <cite>%{book}</cite>',
- 'see' => 'voir',
- 'see %{node_file_href} <cite>%{book}</cite>'
=> 'voir %{node_file_href} <cite>%{book}</cite>',
- 'see %{node_file_href} section `%{section}\'
in <cite>%{book}</cite>' => 'voir %{node_file_href} section `%{section}\' dans
<cite>%{book}</cite>',
- 'see <cite>%{book}</cite>' => 'voir
<cite>%{book}</cite>',
- 'see section `%{section}\' in
<cite>%{book}</cite>' => 'voir la section `%{section}\' dans
<cite>%{book}</cite>',
- 'short table of contents' => 'table des
address@hidden address@hidden'address@hidden'ee',
- 'table of contents' => 'table des
address@hidden',
- 'up node' => 'node au dessus',
- 'up section' => 'section
address@hidden'erieure'
- };
-
-
-$LANGUAGES->{'pt_BR'} = {
- ' The buttons in the navigation panels have the
following meaning:' => ' Os address@hidden nos address@hidden'eis de
navega@,address@hidden possuem os seguintes significados:',
- ' where the @strong{ Example } assumes that the
current position is at @strong{ Subsubsection One-Two-Three } of a document of
the following structure:' => ' onde o @strong{ Exemplo } assume que a
posi@,address@hidden atual localiza-se em @strong{ Subsub@,address@hidden
address@hidden } de um documento com a seguinte estrutura:',
- ' Up ' => ' Acima ',
- '%{acronym_like} (%{explanation})' => '',
- '%{month} %{day}, %{year}' => '%{day} de %{month} de
%{year}',
- '%{name} of %{class}' => '%{name} da %{class}',
- '%{name} on %{class}' => '%{name} na %{class}',
- '%{node_file_href}' => '',
- '%{node_file_href} @cite{%{book}}' => '',
- '%{node_file_href} section `%{section}\' in
@cite{%{book}}' => '%{node_file_href} se@,address@hidden `%{section}\' em
@cite{%{book}}',
- '%{reference_name}' => '',
- '%{style} %{number}' => '',
- '%{style}: %{caption_first_line}' => '',
- '%{style}: %{shortcaption_first_line}' => '',
- '@b{%{quotation_arg}:} ' => '',
- '@cite{%{book}}' => '',
- 'About' => 'Sobre',
- 'About (help)' => 'Sobre (ajuda)',
- 'About This Document' => 'Sobre Esse Documento',
- 'April' => 'Abril',
- 'August' => 'Agosto',
- 'Back' => 'Volta',
- 'Back section in previous file' => '',
- 'Beginning of this chapter or previous chapter' =>
'Come@,{c}o desse address@hidden'itulo ou address@hidden'itulo anterior',
- 'Button' => 'address@hidden',
- 'Contents' => 'address@hidden'udo',
- 'Cover (top) of document' => 'address@hidden'icio
(topo) do documento',
- 'Current Position' => 'Posi@,address@hidden Atual',
- 'Current section' => 'Se@,address@hidden atual',
- 'December' => 'Dezembro',
- 'FastBack' => 'Voltar address@hidden'apido',
- 'FastForward' => 'Avan@,{c}ar address@hidden'apido',
- 'February' => 'Fevereiro',
- 'First' => 'Primeiro',
- 'First section in reading order' => 'Primeira
se@,address@hidden na ordem de leitura',
- 'Following' => 'Seguinte',
- 'Following node' => 'Nodo seguinte',
- 'Footnotes' => 'Notas de address@hidden'e',
- 'Forward' => 'Avan@,{c}ar',
- 'Forward section in next file' => '',
- 'From 1.2.3 go to' => 'De 1.2.3 address@hidden'a
para',
- 'Go to' => 'address@hidden'a para',
- 'Index' => '@\'Indice',
- 'Index Entry' => 'Entrada de @\'Indice',
- 'January' => 'Janeiro',
- 'July' => 'Julho',
- 'Jump to' => 'Pular para',
- 'June' => 'Junho',
- 'Last' => '@\'Ultimo',
- 'Last section in reading order' => '@\'Ultima
se@,address@hidden na ordem de leitura',
- 'March' => 'Mar@,{c}o',
- 'May' => 'Maio',
- 'Menu:' => '',
- 'Name' => 'Nome',
- 'Next' => 'address@hidden'oximo',
- 'Next chapter' => 'address@hidden'oximo
address@hidden'itulo',
+ 'Index Entry' => 'Indexeintrag',
+ 'January' => 'Januar',
+ 'July' => 'Juli',
+ 'Jump to' => 'Springe zu',
+ 'June' => 'Juni',
+ 'Last' => '',
+ 'Last section in reading order' => 'Letzter Abschnitt
in Lesereihenfolge',
+ 'March' => 'M@"arz',
+ 'May' => 'Mai',
+ 'Menu:' => 'Auswahl:',
+ 'Name' => 'Name',
+ 'Next' => '',
+ 'Next chapter' => 'N@"achstes Kapitel',
'Next file' => '',
- 'Next node' => 'address@hidden'oximo nodo',
- 'Next section in reading order' =>
'address@hidden'oxima se@,address@hidden na ordem de leitura',
- 'Next section on same level' =>
'address@hidden'oxima se@,address@hidden no mesmo address@hidden'ivel',
+ 'Next node' => 'N@"achster Knoten',
+ 'Next section in reading order' => 'N@"achster
Abschnitt in Lesereihenfolge',
+ 'Next section on same level' => 'N@"achster Abschitt
derselben Ebene',
'NextFile' => '',
- 'Node following in node reading order' => 'Nodo
seguinte na ordem de leitura de nodos',
- 'Node up' => 'Nodo acima',
- 'NodeNext' => 'address@hidden'oximo Nodo',
- 'NodePrev' => 'Nodo Anterior',
- 'NodeUp' => 'Nodo Acima',
- 'November' => 'Novembro',
- 'October' => 'Outubro',
- 'Overview' => 'address@hidden geral',
- 'Overview:' => 'address@hidden geral:',
- 'Prev' => 'address@hidden'evio',
+ 'Node following in node reading order' => 'N@"achster
Abschnitt in Lesereihenfolge',
+ 'Node up' => 'Knoten nach oben',
+ 'NodeNext' => '',
+ 'NodePrev' => '',
+ 'NodeUp' => '',
+ 'November' => 'November',
+ 'October' => 'Oktober',
+ 'Overview' => '@"Ubersicht',
+ 'Overview:' => '@"Ubersicht:',
+ 'Prev' => '',
'PrevFile' => '',
'Previous file' => '',
- 'Previous node' => 'Nodo anterior',
- 'Previous section in reading order' =>
'Se@,address@hidden anterior na ordem de leitura',
- 'Previous section on same level' =>
'Se@,address@hidden anterior no mesmo address@hidden'ivel',
- 'Section' => 'Se@,address@hidden',
- 'Section One' => 'Se@,address@hidden Um',
- 'See %{node_file_href}' => 'Veja %{node_file_href}',
- 'See %{node_file_href} @cite{%{book}}' => 'Veja
%{node_file_href} @cite{%{book}}',
- 'See %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'Veja %{node_file_href} se@,address@hidden `%{section}\' em
@cite{%{book}}',
- 'See %{reference_name}' => 'Veja %{reference_name}',
- 'See @cite{%{book}}' => 'Veja @cite{%{book}}',
- 'See section %{reference_name}' => 'Veja
se@,address@hidden %{reference_name}',
- 'See section `%{section}\' in @cite{%{book}}' =>
'Veja se@,address@hidden `%{section}\' em @cite{%{book}}',
- 'September' => 'Setembro',
- 'Short Table of Contents' => 'Breve
address@hidden'ario',
- 'Short table of contents' => 'Breve
address@hidden'ario',
- 'Subsection One-Four' => 'Subse@,address@hidden
Um-Quatro',
- 'Subsection One-One' => 'Subse@,address@hidden
Um-Um',
- 'Subsection One-Three' => 'Subse@,address@hidden
address@hidden',
- 'Subsection One-Two' => 'Subse@,address@hidden
Um-Dois',
- 'Subsubsection One-Two-Four' =>
'Subse@,address@hidden Um-Dois-Quatro',
- 'Subsubsection One-Two-One' =>
'Subse@,address@hidden Um-Dois-Um',
- 'Subsubsection One-Two-Three' =>
'Subse@,address@hidden address@hidden',
- 'Subsubsection One-Two-Two' =>
'Subse@,address@hidden Um-Dois-Dois',
+ 'Previous node' => 'Voriger Knoten',
+ 'Previous section in reading order' => 'Voriger
Abschnitt in Lesereihenfolge',
+ 'Previous section on same level' => 'Voriger Abschnitt
derselben Ebene',
+ 'Section' => 'Abschnitt',
+ 'Section One' => 'Abschnitt 1',
+ 'See %{node_file_href}' => 'Siehe %{node_file_href}',
+ 'See %{node_file_href} @cite{%{book}}' => 'Siehe
%{node_file_href} @cite{%{book}}',
+ 'See %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'Siehe %{node_file_href} in Abschnitt `%{section}\' in
@cite{%{book}}',
+ 'See %{reference_name}' => '',
+ 'See @cite{%{book}}' => '',
+ 'See section %{reference_name}' => '',
+ 'See section `%{section}\' in @cite{%{book}}' => 'Siehe
Abschnitt `%{section}\' in @cite{%{book}}',
+ 'September' => 'September',
+ 'Short Table of Contents' => 'Kurzes
Inhaltsverzeichnis',
+ 'Short table of contents' => 'Kurzes
Inhaltsverzeichnis',
+ 'Subsection One-Four' => 'Unterabschnitt 1-4',
+ 'Subsection One-One' => 'Unterabschnitt 1-1',
+ 'Subsection One-Three' => 'Unterabschnitt 1-3',
+ 'Subsection One-Two' => 'Unterabschnitt 1-2',
+ 'Subsubsection One-Two-Four' => 'Unterabschnitt 1-2-4',
+ 'Subsubsection One-Two-One' => 'Unterabschnitt 1-2-1',
+ 'Subsubsection One-Two-Three' => 'Unterabschnitt 1-2-3',
+ 'Subsubsection One-Two-Two' => 'Unterabschnitt 1-2-2',
'T2H_today' => '',
- 'Table of Contents' => 'address@hidden'ario',
- 'Table of contents' => 'address@hidden'ario',
- 'The node you are looking for is at %{href}.' => 'O
nodo que address@hidden address@hidden'a olhando address@hidden'a em %{href}.',
- 'This' => 'Esse',
- 'This document was generated by @emph{%{user}} on
@emph{%{date}} using @uref{%{program_homepage}, @emph{%{program}}}.' => 'Esse
documento foi gereado por @emph{%{user}} em @emph{%{date}} usando
@uref{%{program_homepage}, @emph{%{program}}}.',
- 'This document was generated by @emph{%{user}} using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Esse documento foi gerado
por @emph{%{user}} usando @uref{%{program_homepage}, @emph{%{program}}}.',
- 'This document was generated on @i{%{date}} using
@uref{%{program_homepage}, @i{%{program}}}.' => 'Esse documento foi gerado em
@i{%{date}} usando @uref{%{program_homepage}, @i{%{program}}}.',
- 'This document was generated using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Esse documento foi gerado
usando @uref{%{program_homepage}, @emph{%{program}}}.',
- 'Top' => 'Topo',
- 'Untitled Document' => 'Documento Sem Nome',
- 'Up' => 'Acima',
- 'Up node' => 'Nodo acima',
- 'Up section' => 'Se@,address@hidden acima',
- 'by @emph{%{user}}' => 'por @emph{%{user}}',
- 'by @emph{%{user}} on @emph{%{date}}' => 'por
@emph{%{user}} em @emph{%{date}}',
- 'current' => 'atual',
- 'on @emph{%{date}}' => 'em @emph{%{date}}',
- 'section `%{section}\' in @cite{%{book}}' =>
'se@,address@hidden `%{section}\' em @cite{%{book}}',
- 'see %{node_file_href}' => 'veja %{node_file_href}',
- 'see %{node_file_href} @cite{%{book}}' => 'veja
%{node_file_href} @cite{%{book}}',
- 'see %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'veja %{node_file_href} se@,address@hidden `%{section}\' em
@cite{%{book}}',
- 'see %{reference_name}' => 'veja %{reference_name}',
- 'see @cite{%{book}}' => 'veja @cite{%{book}}',
- 'see section %{reference_name}' => 'veja
se@,address@hidden %{reference_name}',
- 'see section `%{section}\' in @cite{%{book}}' =>
'veja se@,address@hidden `%{section}\' em @cite{%{book}}',
- 'unknown' => 'desconhecido'
+ 'Table of Contents' => 'Inhaltsverzeichnis',
+ 'Table of contents' => 'Inhaltsverzeichnis',
+ 'The node you are looking for is at %{href}.' => 'Der
Knoten, den Sie sehen, befindet sich bei %{href}',
+ 'This' => '',
+ 'This document was generated by @emph{%{user}} on
@emph{%{date}} using @uref{%{program_homepage}, @emph{%{program}}}.' => 'Dieses
Dokument wurde erzeugt von @emph{%{user}} am @emph{%{date}} durch
@uref{%{program_homepage}, @emph{%{program}}}.',
+ 'This document was generated by @emph{%{user}} using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Dieses Dokument wurde
erzeugt von @emph{%{user}} durch @uref{%{program_homepage},
@emph{%{program}}}.',
+ 'This document was generated on @i{%{date}} using
@uref{%{program_homepage}, @i{%{program}}}.' => 'Dieses Dokument wurde erzeugt
am @i{%{date}} durch @uref{%{program_homepage}, @i{%{program}}}.',
+ 'This document was generated using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Dieses Dokument wurde
erzeugt durch @uref{%{program_homepage}, @emph{%{program}}}.',
+ 'Top' => 'Anfang',
+ 'Untitled Document' => 'Unbenanntes Dokumen',
+ 'Up' => 'Nach oben',
+ 'Up node' => 'Knoten nach oben',
+ 'Up section' => 'Abschnitt nach oben',
+ 'by @emph{%{user}}' => 'von @emph{%{user}}',
+ 'by @emph{%{user}} on @emph{%{date}}' => 'von
@emph{%{user}} am @emph{%{date}}',
+ 'current' => '',
+ 'on @emph{%{date}}' => 'am @emph{%{date}}',
+ 'section `%{section}\' in @cite{%{book}}' => 'Abschnitt
`%{section}\' in @cite{%{book}}',
+ 'see %{node_file_href}' => 'siehe %{node_file_href}',
+ 'see %{node_file_href} @cite{%{book}}' => 'siehe
%{node_file_href} @cite{%{book}}',
+ 'see %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'siehe %{node_file_href} im Abschnitt `%{section}\' in
@cite{%{book}}',
+ 'see %{reference_name}' => 'siehe %{reference_name}',
+ 'see @cite{%{book}}' => 'siehe @cite{%{book}}',
+ 'see section %{reference_name}' => 'siehe Abschnitt
%{reference_name}',
+ 'see section `%{section}\' in @cite{%{book}}' => 'siehe
Abschnitt `%{section}\' in @cite{%{book}}',
+ 'unknown' => 'unbekannt'
};
-$T2H_OBSOLETE_STRINGS->{'pt_BR'} = {
- 'See' => 'Veja',
- 'about (help)' => 'sobre (ajuda)',
- 'beginning of this chapter or previous
chapter' => 'come@,{c}o desse address@hidden'itulo ou address@hidden'itulo
anterior',
- 'cover (top) of document' =>
'address@hidden'icio (topo) do documento',
- 'current section' => 'se@,address@hidden
atual',
- 'first section in reading order' =>
'primeira se@,address@hidden na ordem de leitura',
- 'following node' => 'nodo seguinte',
- 'index' => '@\'indice',
- 'last section in reading order' =>
'@\'ultima se@,address@hidden na ordem de leitura',
- 'next chapter' => 'address@hidden'oximo
address@hidden'itulo',
- 'next node' => 'address@hidden'oximo
nodo',
- 'next section in reading order' =>
'address@hidden'oxima se@,address@hidden na ordem de leitura',
- 'next section on same level' =>
'address@hidden'oxima se@,address@hidden no mesmo address@hidden'ivel',
- 'node following in node reading order' =>
'nodo seguinte na ordem de leitura de nodos',
- 'node up' => 'nodo acima',
- 'previous node' => 'nodo anterior',
- 'previous section in reading order' =>
'se@,address@hidden anterior na ordem de leitura',
- 'previous section on same level' =>
'se@,address@hidden anterior no mesmo address@hidden'ivel',
- 'section' => 'Se@,address@hidden',
- 'see' => 'veja',
- 'short table of contents' => 'breve
address@hidden'ario',
- 'table of contents' =>
'address@hidden'ario',
- 'up node' => 'nodo acima',
- 'up section' => 'se@,address@hidden acima'
+$T2H_OBSOLETE_STRINGS->{'de'} = {
+ 'See' => 'Siehe',
+ 'section' => 'Abschnitt',
+ 'see' => 'siehe'
};
-$LANGUAGES->{'nl'} = {
+$LANGUAGES->{'en'} = {
' The buttons in the navigation panels have the
following meaning:' => '',
' where the @strong{ Example } assumes that the
current position is at @strong{ Subsubsection One-Two-Three } of a document of
the following structure:' => '',
' Up ' => '',
@@ -350,9 +150,9 @@
'@cite{%{book}}' => '',
'About' => '',
'About (help)' => '',
- 'About This Document' => 'No translation available!',
- 'April' => 'April',
- 'August' => 'Augustus',
+ 'About This Document' => '',
+ 'April' => '',
+ 'August' => '',
'Back' => '',
'Back section in previous file' => '',
'Beginning of this chapter or previous chapter' => '',
@@ -361,29 +161,29 @@
'Cover (top) of document' => '',
'Current Position' => '',
'Current section' => '',
- 'December' => 'December',
+ 'December' => '',
'FastBack' => '',
'FastForward' => '',
- 'February' => 'Februari',
+ 'February' => '',
'First' => '',
'First section in reading order' => '',
'Following' => '',
'Following node' => '',
- 'Footnotes' => 'No translation available!',
+ 'Footnotes' => '',
'Forward' => '',
'Forward section in next file' => '',
'From 1.2.3 go to' => '',
'Go to' => '',
- 'Index' => 'Index',
+ 'Index' => '',
'Index Entry' => '',
- 'January' => 'Januari',
- 'July' => 'Juli',
+ 'January' => '',
+ 'July' => '',
'Jump to' => '',
- 'June' => 'Juni',
+ 'June' => '',
'Last' => '',
'Last section in reading order' => '',
- 'March' => 'Maart',
- 'May' => 'Mei',
+ 'March' => '',
+ 'May' => '',
'Menu:' => '',
'Name' => '',
'Next' => '',
@@ -398,8 +198,8 @@
'NodeNext' => '',
'NodePrev' => '',
'NodeUp' => '',
- 'November' => 'November',
- 'October' => 'Oktober',
+ 'November' => '',
+ 'October' => '',
'Overview' => '',
'Overview:' => '',
'Prev' => '',
@@ -417,8 +217,8 @@
'See @cite{%{book}}' => '',
'See section %{reference_name}' => '',
'See section `%{section}\' in @cite{%{book}}' => '',
- 'September' => 'September',
- 'Short Table of Contents' => 'Korte inhoudsopgave',
+ 'September' => '',
+ 'Short Table of Contents' => '',
'Short table of contents' => '',
'Subsection One-Four' => '',
'Subsection One-One' => '',
@@ -428,8 +228,8 @@
'Subsubsection One-Two-One' => '',
'Subsubsection One-Two-Three' => '',
'Subsubsection One-Two-Two' => '',
- 'T2H_today' => '',
- 'Table of Contents' => 'Inhoudsopgave',
+ 'T2H_today' => '%s, %d %d',
+ 'Table of Contents' => '',
'Table of contents' => '',
'The node you are looking for is at %{href}.' => '',
'This' => '',
@@ -457,10 +257,318 @@
'unknown' => ''
};
-$T2H_OBSOLETE_STRINGS->{'nl'} = {
- 'See' => 'Zie',
- 'section' => 'sectie',
- 'see' => 'zie'
+$T2H_OBSOLETE_STRINGS->{'en'} = {};
+
+
+$LANGUAGES->{'es'} = {
+ ' The buttons in the navigation panels have the
following meaning:' => ' Los botones de los paneles de address@hidden'on
tienen el significado siguiente:',
+ ' where the @strong{ Example } assumes that the
current position is at @strong{ Subsubsection One-Two-Three } of a document of
the following structure:' => ' donde el @strong{ Ejemplo } supone que la
posición actual está en la @strong{ address@hidden'on uno-dos-tres } de un
documento de la estructura siguiente:',
+ ' Up ' => ' Subir ',
+ '%{acronym_like} (%{explanation})' => '',
+ '%{month} %{day}, %{year}' => 'el %{day} %{month}
%{year}',
+ '%{name} of %{class}' => '%{name} de %{class}',
+ '%{name} on %{class}' => '%{name} en %{class}',
+ '%{node_file_href}' => '',
+ '%{node_file_href} @cite{%{book}}' => '',
+ '%{node_file_href} section `%{section}\' in
@cite{%{book}}' => '%{node_file_href} address@hidden'on `%{section}\' en
@cite{%{book}}',
+ '%{reference_name}' => '',
+ '%{style} %{number}' => '',
+ '%{style}: %{caption_first_line}' => '',
+ '%{style}: %{shortcaption_first_line}' => '',
+ '@b{%{quotation_arg}:} ' => '',
+ '@cite{%{book}}' => '',
+ 'About' => 'Acerca de',
+ 'About (help)' => 'Acerca de (address@hidden'agina de
ayuda)',
+ 'About This Document' => 'Acerca de este documento',
+ 'April' => 'abril',
+ 'August' => 'agosto',
+ 'Back' => 'address@hidden'as',
+ 'Back section in previous file' => 'Retroceder
address@hidden'on en el archivo anterior',
+ 'Beginning of this chapter or previous chapter' =>
'Inicio de este address@hidden'itulo o address@hidden'itulo anterior',
+ 'Button' => 'address@hidden'on',
+ 'Contents' => '@\'Indice general',
+ 'Cover (top) of document' => 'Portada del documento',
+ 'Current Position' => 'address@hidden'on actual',
+ 'Current section' => 'address@hidden'on actual',
+ 'December' => 'diciembre',
+ 'FastBack' => 'Retroceso address@hidden'apido',
+ 'FastForward' => 'Avance address@hidden'apido',
+ 'February' => 'febrero',
+ 'First' => 'Primero',
+ 'First section in reading order' => 'Primera
address@hidden'on en orden de lectura',
+ 'Following' => 'Siguiente',
+ 'Following node' => 'Nodo siguiente',
+ 'Footnotes' => 'Notas el pie',
+ 'Forward' => 'Adelante',
+ 'Forward section in next file' => 'Avanzar
address@hidden'on en el address@hidden'oximo archivo',
+ 'From 1.2.3 go to' => 'Desde 1.2.3 ir a',
+ 'Go to' => 'Ir a',
+ 'Index' => '@\'Indice',
+ 'Index Entry' => 'Entrada de @\'indice',
+ 'January' => 'enero',
+ 'July' => 'julio',
+ 'Jump to' => 'Saltar a',
+ 'June' => 'junio',
+ 'Last' => '@\'Ultimo',
+ 'Last section in reading order' => '@\'Ultima
address@hidden'on en orden de lectura',
+ 'March' => 'marzo',
+ 'May' => 'mayo',
+ 'Menu:' => 'address@hidden'u:',
+ 'Name' => 'Nombre',
+ 'Next' => 'Siguiente',
+ 'Next chapter' => 'address@hidden'itulo siguiente',
+ 'Next file' => 'Archivo siguiente',
+ 'Next node' => 'Nodo siguiente',
+ 'Next section in reading order' => 'address@hidden'on
siguiente en orden de lectura',
+ 'Next section on same level' => 'address@hidden'on
siguiente en el mismo nivel',
+ 'NextFile' => 'ArchivoSiguiente',
+ 'Node following in node reading order' => 'Nodo
siguiente en orden de lectura de nodos',
+ 'Node up' => 'Subir nodo',
+ 'NodeNext' => 'NodoSiguiente',
+ 'NodePrev' => 'NodoAnterior',
+ 'NodeUp' => 'SubirNodo',
+ 'November' => 'noviembre',
+ 'October' => 'octubre',
+ 'Overview' => 'address@hidden'amica',
+ 'Overview:' => 'address@hidden'amica:',
+ 'Prev' => 'Ant',
+ 'PrevFile' => 'ArchivoAnt',
+ 'Previous file' => 'Archivo anterior',
+ 'Previous node' => 'Nodo anterior',
+ 'Previous section in reading order' =>
'address@hidden'on anterior en orden de lectura',
+ 'Previous section on same level' => 'address@hidden'on
anterior en el mismo nivel',
+ 'Section' => 'address@hidden'on',
+ 'Section One' => 'address@hidden'on Uno',
+ 'See %{node_file_href}' => 'address@hidden'ease
%{node_file_href}',
+ 'See %{node_file_href} @cite{%{book}}' =>
'address@hidden'ease %{node_file_href} @cite{%{book}}',
+ 'See %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'address@hidden'ease %{node_file_href} address@hidden'on
`%{section}\' en @cite{%{book}}',
+ 'See %{reference_name}' => 'address@hidden'ease
%{reference_name}',
+ 'See @cite{%{book}}' => 'address@hidden'ease
@cite{%{book}}',
+ 'See section %{reference_name}' => 'address@hidden'ease
la address@hidden'on %{reference_name}',
+ 'See section `%{section}\' in @cite{%{book}}' =>
'address@hidden'ease la address@hidden'on `%{section}\' en @cite{%{book}}',
+ 'September' => 'septiembre',
+ 'Short Table of Contents' => 'Resumen del Contenido',
+ 'Short table of contents' => 'Resumen del contenido',
+ 'Subsection One-Four' => 'address@hidden'on uno-cuatro',
+ 'Subsection One-One' => 'address@hidden'on uno-uno',
+ 'Subsection One-Three' => 'address@hidden'on uno-tres',
+ 'Subsection One-Two' => 'address@hidden'on uno-dos',
+ 'Subsubsection One-Two-Four' => 'address@hidden'on
uno-dos-cuatro',
+ 'Subsubsection One-Two-One' => 'address@hidden'on
uno-dos-uno',
+ 'Subsubsection One-Two-Three' => 'address@hidden'on
uno-dos-tres',
+ 'Subsubsection One-Two-Two' => 'address@hidden'on
uno-dos-dos',
+ 'T2H_today' => '%2$d %1$s %3$d',
+ 'Table of Contents' => '@\'address@hidden General',
+ 'Table of contents' => '@\'address@hidden general',
+ 'The node you are looking for is at %{href}.' => 'El
nodo que busca se encuentra en %{href}.',
+ 'This' => 'Este',
+ 'This document was generated by @emph{%{user}} on
@emph{%{date}} using @uref{%{program_homepage}, @emph{%{program}}}.' => 'Este
documento ha sido generado por @emph{%{user}} el @emph{%{date}} utilizando
@uref{%{program_homepage}, @emph{%{program}}}.',
+ 'This document was generated by @emph{%{user}} using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Este documento ha sido
generado por @emph{%{user}} utilizando @uref{%{program_homepage},
@emph{%{program}}}.',
+ 'This document was generated on @i{%{date}} using
@uref{%{program_homepage}, @i{%{program}}}.' => 'Este documento se generó el
@i{%{date}} utilizando @uref{%{program_homepage}, @i{%{program}}}.',
+ 'This document was generated using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Este documento se generó
utilizando @uref{%{program_homepage}, @emph{%{program}}}.',
+ 'Top' => 'Arriba',
+ 'Untitled Document' => 'Documento sin
address@hidden'itulo',
+ 'Up' => 'Subir',
+ 'Up node' => 'Subir nodo',
+ 'Up section' => 'Subir address@hidden'on',
+ 'by @emph{%{user}}' => 'por @emph{%{user}',
+ 'by @emph{%{user}} on @emph{%{date}}' => 'por
@emph{%{user}} el @emph{%{date}}',
+ 'current' => 'actual',
+ 'on @emph{%{date}}' => 'el @emph{%{date}}',
+ 'section `%{section}\' in @cite{%{book}}' =>
'address@hidden'on `%{section}\' en @cite{%{book}}',
+ 'see %{node_file_href}' => 'address@hidden'ease
%{node_file_href}',
+ 'see %{node_file_href} @cite{%{book}}' =>
'address@hidden'ease %{node_file_href} @cite{%{book}}',
+ 'see %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'address@hidden'ease %{node_file_href} address@hidden'on
`%{section}\' en @cite{%{book}}',
+ 'see %{reference_name}' => 'address@hidden'ease
%{reference_name}',
+ 'see @cite{%{book}}' => 'address@hidden'ease
@cite{%{book}}',
+ 'see section %{reference_name}' => 'address@hidden'ease
la address@hidden'on %{reference_name}',
+ 'see section `%{section}\' in @cite{%{book}}' =>
'address@hidden'ease la address@hidden'on `%{section}\' en @cite{%{book}}',
+ 'unknown' => 'desconocido'
+ };
+
+$T2H_OBSOLETE_STRINGS->{'es'} = {
+ 'See' => 'address@hidden'ease',
+ 'section' => 'address@hidden'on',
+ 'see' => 'address@hidden'ease'
+ };
+
+
+$LANGUAGES->{'fr'} = {
+ ' The buttons in the navigation panels have the
following meaning:' => ' Les boutons de navigation ont la signification
suivante :',
+ ' where the @strong{ Example } assumes that the
current position is at @strong{ Subsubsection One-Two-Three } of a document of
the following structure:' => ' Dans cet exemple on est @`a @strong{ Sous sous
section un-deux-trois } dans un document dont la structure est :',
+ ' Up ' => 'Plus haut',
+ '%{acronym_like} (%{explanation})' => '',
+ '%{month} %{day}, %{year}' => 'le %{day} %{month}
%{year}',
+ '%{name} of %{class}' => '%{name} de %{class}',
+ '%{name} on %{class}' => '%{name} de %{class}',
+ '%{node_file_href}' => '',
+ '%{node_file_href} @cite{%{book}}' => '',
+ '%{node_file_href} section `%{section}\' in
@cite{%{book}}' => '%{node_file_href} section `%{section}\' dans
@cite{%{book}}',
+ '%{reference_name}' => '',
+ '%{style} %{number}' => '',
+ '%{style}: %{caption_first_line}' => '',
+ '%{style}: %{shortcaption_first_line}' => '',
+ '@b{%{quotation_arg}:} ' => '',
+ '@cite{%{book}}' => '',
+ 'About' => 'A propos',
+ 'About (help)' => 'A propos (page d\'aide)',
+ 'About This Document' => 'A propos de ce document',
+ 'April' => 'avril',
+ 'August' => 'address@hidden',
+ 'Back' => 'Retour',
+ 'Back section in previous file' => '',
+ 'Beginning of this chapter or previous chapter' =>
'address@hidden'ebut de ce chapitre ou chapitre
address@hidden'address@hidden'edent',
+ 'Button' => 'Bouton',
+ 'Contents' => 'Table des address@hidden',
+ 'Cover (top) of document' => 'Couverture (top) du
document',
+ 'Current Position' => 'Position',
+ 'Current section' => 'Section actuelle',
+ 'December' => 'address@hidden'ecembre',
+ 'FastBack' => 'RetourRapide',
+ 'FastForward' => 'AvanceRapide',
+ 'February' => 'address@hidden'evrier',
+ 'First' => 'Premier',
+ 'First section in reading order' => 'address@hidden
section dans l\'ordre de lecture',
+ 'Following' => 'Suivant',
+ 'Following node' => 'address@hidden suivant',
+ 'Footnotes' => 'Notes de bas de page',
+ 'Forward' => 'Avant',
+ 'Forward section in next file' => '',
+ 'From 1.2.3 go to' => 'Depuis 1.2.3 aller @`a',
+ 'Go to' => 'Aller @`a',
+ 'Index' => 'Index',
+ 'Index Entry' => 'address@hidden'ee d\'index',
+ 'January' => 'janvier',
+ 'July' => 'juillet',
+ 'Jump to' => 'Aller @`a',
+ 'June' => 'juin',
+ 'Last' => 'Dernier',
+ 'Last section in reading order' => 'address@hidden
section dans l\'ordre de lecture',
+ 'March' => 'mars',
+ 'May' => 'mai',
+ 'Menu:' => 'Menu@ :',
+ 'Name' => 'Nom',
+ 'Next' => 'Suivant',
+ 'Next chapter' => 'Chapitre suivant',
+ 'Next file' => 'Fichier suivant',
+ 'Next node' => 'address@hidden suivant',
+ 'Next section in reading order' => 'Section suivante
dans l\'ordre de lecture',
+ 'Next section on same level' => 'Section suivante au
address@hidden niveau',
+ 'NextFile' => 'FichierSuivant',
+ 'Node following in node reading order' =>
'address@hidden suivant dans l\'ordre de lecture',
+ 'Node up' => 'address@hidden au dessus',
+ 'NodeNext' => 'address@hidden',
+ 'NodePrev' => 'address@hidden@\'address@hidden'edent',
+ 'NodeUp' => 'address@hidden',
+ 'November' => 'novembre',
+ 'October' => 'octobre',
+ 'Overview' => 'Vue d\'ensemble',
+ 'Overview:' => 'Vue d\'ensemble@ :',
+ 'Prev' => 'address@hidden'address@hidden'edent',
+ 'PrevFile' => '',
+ 'Previous file' => 'Fichier
address@hidden'address@hidden'edent',
+ 'Previous node' => 'address@hidden
address@hidden'address@hidden'edent',
+ 'Previous section in reading order' => 'Section
address@hidden'address@hidden'edente dans l\'ordre de lecture',
+ 'Previous section on same level' => 'Section
address@hidden'address@hidden'edente au address@hidden niveau',
+ 'Section' => '',
+ 'Section One' => 'Section un',
+ 'See %{node_file_href}' => 'Voir %{node_file_href}',
+ 'See %{node_file_href} @cite{%{book}}' => 'Voir
%{node_file_href} @cite{%{book}}',
+ 'See %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'Voir %{node_file_href} section `%{section}\' dans
@cite{%{book}}',
+ 'See %{reference_name}' => 'Voir %{reference_name}',
+ 'See @cite{%{book}}' => 'Voir @cite{%{book}}',
+ 'See section %{reference_name}' => 'Voir la section
%{reference_name}',
+ 'See section `%{section}\' in @cite{%{book}}' => 'Voir
la section `%{section}\' dans @cite{%{book}}',
+ 'September' => 'septembre',
+ 'Short Table of Contents' =>
'address@hidden'address@hidden'e du contenu',
+ 'Short table of contents' =>
'address@hidden'address@hidden'e du contenu',
+ 'Subsection One-Four' => 'Sous section un-quatre',
+ 'Subsection One-One' => 'Sous section un-un',
+ 'Subsection One-Three' => 'Sous section un-trois',
+ 'Subsection One-Two' => 'Sous section un-deux',
+ 'Subsubsection One-Two-Four' => 'Sous sous section
un-deux-quatre',
+ 'Subsubsection One-Two-One' => 'Sous sous section
un-deux-un',
+ 'Subsubsection One-Two-Three' => 'Sous sous section
un-deux-trois',
+ 'Subsubsection One-Two-Two' => 'Sous sous section
un-deux-deux',
+ 'T2H_today' => '%2$d %1$s %3$d',
+ 'Table of Contents' => 'Table des address@hidden',
+ 'Table of contents' => 'Table des address@hidden',
+ 'The node you are looking for is at %{href}.' => 'Le
address@hidden que vous recherchez est ici@ : %{href}.',
+ 'This' => 'Ici',
+ 'This document was generated by @emph{%{user}} on
@emph{%{date}} using @uref{%{program_homepage}, @emph{%{program}}}.' => 'Ce
document a @\'address@hidden'e address@hidden'address@hidden'address@hidden'e
le @emph{%{date}} par @emph{%{user}} en utilisant @uref{%{program_homepage},
@emph{%{program}}}.',
+ 'This document was generated by @emph{%{user}} using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Ce document a
@\'address@hidden'e address@hidden'address@hidden'address@hidden'e par
@emph{%{user}} en utilisant @uref{%{program_homepage}, @emph{%{program}}}.',
+ 'This document was generated on @i{%{date}} using
@uref{%{program_homepage}, @i{%{program}}}.' => 'Ce document a
@\'address@hidden'e address@hidden'address@hidden'address@hidden'e le
@emph{%{date}} en utilisant @uref{%{program_homepage}, @emph{%{program}}}',
+ 'This document was generated using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Ce document a
@\'address@hidden'e address@hidden'address@hidden'address@hidden'e en utilisant
@uref{%{program_homepage}, @emph{%{program}}}.',
+ 'Top' => 'Racine',
+ 'Untitled Document' => 'Document sans titre',
+ 'Up' => 'Monter',
+ 'Up node' => 'address@hidden au dessus',
+ 'Up section' => 'Section address@hidden'erieure',
+ 'by @emph{%{user}}' => 'par @emph{%{user}}',
+ 'by @emph{%{user}} on @emph{%{date}}' => 'par
@emph{%{user}} le @emph{%{date}}',
+ 'current' => 'courante',
+ 'on @emph{%{date}}' => 'le @emph{%{date}}',
+ 'section `%{section}\' in @cite{%{book}}' => 'section
`%{section}\' dans @cite{%{book}}',
+ 'see %{node_file_href}' => 'voir %{node_file_href}',
+ 'see %{node_file_href} @cite{%{book}}' => 'voir
%{node_file_href} @cite{%{book}}',
+ 'see %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'voir %{node_file_href} section `%{section}\' dans
@cite{%{book}}',
+ 'see %{reference_name}' => 'voir %{reference_name}',
+ 'see @cite{%{book}}' => 'voir @cite{%{book}}',
+ 'see section %{reference_name}' => 'voir la section
%{reference_name}',
+ 'see section `%{section}\' in @cite{%{book}}' => 'voir
la section `%{section}\' dans @cite{{book}}',
+ 'unknown' => 'inconnu'
+ };
+
+$T2H_OBSOLETE_STRINGS->{'fr'} = {
+ ' This document was generated
%{who_and_when_generated} using %{program_homepage_href}.' => ' Ce document a
été généré %{who_and_when_generated} en
utilisant %{program_homepage_href}.',
+ ' where the <strong> Example </strong>
assumes that the current position is at <strong> Subsubsection One-Two-Three
</strong> of a document of the following structure:' => ' Dans cet exemple on
est à <strong> Sous section un-deux-trois </strong> dans un document
dont la structure est :',
+ '%{node_file_href} section `%{section}\' in
<cite>%{book}</cite>' => '%{node_file_href} section `%{section}\' dans
<cite>%{book}</cite>',
+ 'See' => 'Voir',
+ 'See %{node_file_href} <cite>%{book}</cite>'
=> 'Voir %{node_file_href} <cite>%{book}</cite>',
+ 'See %{node_file_href} section `%{section}\'
in <cite>%{book}</cite>' => 'Voir %{node_file_href} section `%{section}\' dans
<cite>%{book}</cite>',
+ 'See <cite>%{book}</cite>' => 'Voir
<cite>%{book}</cite>',
+ 'See section `%{section}\' in
<cite>%{book}</cite>' => 'Voir la section `%{section}\' dans
<cite>%{book}</cite>',
+ 'This document was generated by
<i>%{user}</i> on <i>%{date}</i> using %{program_homepage_href}.' => 'Ce
document a été généré par <i>%{user}</i>
<i>%{date}</i> en utilisant %{program_homepage_href}.',
+ 'This document was generated by
<i>%{user}</i> using %{program_homepage_href}.' => 'Ce document a
été généré par <i>%{user}</i> en utilisant
%{program_homepage_href}.',
+ 'This document was generated by
@emph{%{user}} on @emph{%{date}} using %{program_homepage_href}.' => 'Ce
document a @\'address@hidden'e address@hidden'address@hidden'address@hidden'e
par @emph{%{user}} @emph{%{date}} en utilisant %{program_homepage_href}.',
+ 'This document was generated by
@emph{%{user}} using %{program_homepage_href}.' => 'Ce document a
@\'address@hidden'e address@hidden'address@hidden'address@hidden'e par
@emph{%{user}} en utilisant %{program_homepage_href}.',
+ 'This document was generated on
<i>%{date}</i> using %{program_homepage_href}.' => 'Ce document a
été généré <i>%{date}</i> en utilisant
%{program_homepage_href}.',
+ 'This document was generated on
@emph{%{date}} using %{program_homepage_href}.' => 'Ce document a
@\'address@hidden'e address@hidden'address@hidden'address@hidden'e
@emph{%{date}} en utilisant %{program_homepage_href}.',
+ 'This document was generated on
@emph{%{date}} using @uref{%{program_homepage}, @emph{%{program}}}.' => 'Ce
document a @\'address@hidden'e address@hidden'address@hidden'address@hidden'e
@emph{%{date}} en utilisant @uref{%{program_homepage}, @emph{%{program}}}.',
+ 'This document was generated using
%{program_homepage_href}.' => 'Ce document a @\'address@hidden'e
address@hidden'address@hidden'address@hidden'e en utilisant
%{program_homepage_href}.',
+ 'about (help)' => '@`a propos (page
d\'aide)',
+ 'about (this page)' => 'a propos (cette
page)',
+ 'beginning of this chapter or previous
chapter' => 'address@hidden'ebut de ce chapitre ou chapitre
address@hidden'address@hidden'edent',
+ 'by <i>%{user}</i>' => 'par <i>%{user}</i>',
+ 'by <i>%{user}</i> on <i>%{date}</i>' =>
'par <i>%{user}</i> <i>%{date}</i>',
+ 'concept index' => 'index',
+ 'cover (top) of document' => 'couverture
(top) du document',
+ 'current section' => 'section actuelle',
+ 'first section in reading order' =>
'address@hidden section dans l\'ordre de lecture',
+ 'following node' => 'node suivant',
+ 'index' => 'index',
+ 'last section in reading order' =>
'address@hidden section dans l\'ordre de lecture',
+ 'next chapter' => 'chapitre suivant',
+ 'next node' => 'node suivant',
+ 'next section in reading order' => 'section
suivante dans l\'ordre de lecture',
+ 'next section on same level' => 'section
suivante au address@hidden niveau',
+ 'node following in node reading order' =>
'node suivant dans l\'ordre des nodes',
+ 'node up' => 'node au dessus',
+ 'on <i>%{date}</i>' => '<i>%{date}</i>',
+ 'previous node' => 'node
address@hidden'address@hidden'edent',
+ 'previous section in reading order' =>
'section address@hidden'address@hidden'edente dans l\'ordre de lecture',
+ 'previous section on same level' => 'section
address@hidden'address@hidden'edente au address@hidden niveau',
+ 'section' => 'section',
+ 'section `%{section}\' in
<cite>%{book}</cite>' => 'section `%{section}\' dans <cite>%{book}</cite>',
+ 'see' => 'voir',
+ 'see %{node_file_href} <cite>%{book}</cite>'
=> 'voir %{node_file_href} <cite>%{book}</cite>',
+ 'see %{node_file_href} section `%{section}\'
in <cite>%{book}</cite>' => 'voir %{node_file_href} section `%{section}\' dans
<cite>%{book}</cite>',
+ 'see <cite>%{book}</cite>' => 'voir
<cite>%{book}</cite>',
+ 'see section `%{section}\' in
<cite>%{book}</cite>' => 'voir la section `%{section}\' dans
<cite>%{book}</cite>',
+ 'short table of contents' => 'table des
address@hidden address@hidden'address@hidden'ee',
+ 'table of contents' => 'table des
address@hidden',
+ 'up node' => 'node au dessus',
+ 'up section' => 'section
address@hidden'erieure'
};
@@ -572,337 +680,183 @@
'This document was generated using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'address@hidden,
@emph{%{program}}}ãç¨ãã¦çæããã¾ããã',
'Top' => 'åé ',
'Untitled Document' => 'ç¡é¡ã®ææ¸',
- 'Up' => '',
- 'Up node' => '',
- 'Up section' => '',
- 'by @emph{%{user}}' => '@emph{%{user}}',
- 'by @emph{%{user}} on @emph{%{date}}' =>
'@emph{%{user}}, @emph{%{date}',
- 'current' => 'ç¾å¨ä½ç½®',
- 'on @emph{%{date}}' => '@emph{%{date}}',
- 'section `%{section}\' in @cite{%{book}}' =>
'@cite{%{book}}ã® `%{section}\' ',
- 'see %{node_file_href}' => '%{node_file_href}åç
§',
- 'see %{node_file_href} @cite{%{book}}' =>
'%{node_file_href} @cite{%{book}}åç
§',
- 'see %{node_file_href} section `%{section}\' in
@cite{%{book}}' => '',
- 'see %{reference_name}' => '',
- 'see @cite{%{book}}' => '',
- 'see section %{reference_name}' => '',
- 'see section `%{section}\' in @cite{%{book}}' => '',
- 'unknown' => 'ä¸æ'
- };
-
-$T2H_OBSOLETE_STRINGS->{'ja'} = {
- 'about (help)' => '使ç¨æ³ (ãã«ã)',
- 'beginning of this chapter or previous
chapter' => 'ãã®ç« ã¾ãã¯åã®ç« ã®åé ',
- 'cover (top) of document' =>
'ææ¸ã®è¡¨ç´ (ããã)',
- 'current section' => 'ç¾å¨ã®ç¯',
- 'first section in reading order' => 'ææ¸é
ã§åã®é
',
- 'following node' => '次ã®ç¯',
- 'index' => 'è¦åºã',
- 'last section in reading order' => 'ææ¸é
ã§æå¾ã®é
',
- 'next chapter' => '次ã®ç« ',
- 'next node' => '次ã®ç¯',
- 'next section in reading order' => 'ææ¸é
ã§æ¬¡ã®é
',
- 'next section on same level' =>
'åãé層ã«ãã次ã®é
',
- 'node following in node reading order' =>
'ææ¸é ã§æ¬¡ã®ç¯',
- 'node up' => 'ä¸ã®ç¯ã¸',
- 'previous node' => 'åã®ç¯',
- 'previous section in reading order' =>
'ææ¸é ã§åã®ç¯',
- 'previous section on same level' =>
'åãé層ã«ããåã®é
',
- 'short table of contents' =>
'ç°¡ç¥åããç®æ¬¡',
- 'table of contents' => 'ææ¸ã®ç®æ¬¡',
- 'up node' => 'ä¸ã®ç¯',
- 'up section' => 'ä¸ã®é
'
- };
-
-
-$LANGUAGES->{'pt'} = {
- ' The buttons in the navigation panels have the
following meaning:' => ' Os address@hidden nos address@hidden'eis de
navega@,address@hidden possuem os seguintes significados:',
- ' where the @strong{ Example } assumes that the
current position is at @strong{ Subsubsection One-Two-Three } of a document of
the following structure:' => ' onde o @strong{ Exemplo } assume que a
posi@,address@hidden atual localiza-se em @strong{ Subsub@,address@hidden
address@hidden } de um documento com a seguinte estrutura:',
- ' Up ' => ' Acima ',
- '%{acronym_like} (%{explanation})' => '',
- '%{month} %{day}, %{year}' => '%{day} de %{month} de
%{year}',
- '%{name} of %{class}' => '%{name} da %{class}',
- '%{name} on %{class}' => '%{name} na %{class}',
- '%{node_file_href}' => '',
- '%{node_file_href} @cite{%{book}}' => '',
- '%{node_file_href} section `%{section}\' in
@cite{%{book}}' => '%{node_file_href} se@,address@hidden `%{section}\' em
@cite{%{book}}',
- '%{reference_name}' => '',
- '%{style} %{number}' => '',
- '%{style}: %{caption_first_line}' => '',
- '%{style}: %{shortcaption_first_line}' => '',
- '@b{%{quotation_arg}:} ' => '',
- '@cite{%{book}}' => '',
- 'About' => 'Sobre',
- 'About (help)' => 'Sobre (ajuda)',
- 'About This Document' => 'Sobre Esse Documento',
- 'April' => 'Abril',
- 'August' => 'Agosto',
- 'Back' => 'Volta',
- 'Back section in previous file' => '',
- 'Beginning of this chapter or previous chapter' =>
'Come@,{c}o desse address@hidden'itulo ou address@hidden'itulo anterior',
- 'Button' => 'address@hidden',
- 'Contents' => 'address@hidden'udo',
- 'Cover (top) of document' => 'address@hidden'icio
(topo) do documento',
- 'Current Position' => 'Posi@,address@hidden Atual',
- 'Current section' => 'Se@,address@hidden atual',
- 'December' => 'Dezembro',
- 'FastBack' => 'Voltar address@hidden'apido',
- 'FastForward' => 'Avan@,{c}ar address@hidden'apido',
- 'February' => 'Fevereiro',
- 'First' => 'Primeiro',
- 'First section in reading order' => 'Primeira
se@,address@hidden na ordem de leitura',
- 'Following' => 'Seguinte',
- 'Following node' => 'Nodo seguinte',
- 'Footnotes' => 'Notas de address@hidden'e',
- 'Forward' => 'Avan@,{c}ar',
- 'Forward section in next file' => '',
- 'From 1.2.3 go to' => 'De 1.2.3 address@hidden'a para',
- 'Go to' => 'address@hidden'a para',
- 'Index' => '@\'Indice',
- 'Index Entry' => 'Entrada de @\'Indice',
- 'January' => 'Janeiro',
- 'July' => 'Julho',
- 'Jump to' => 'Pular para',
- 'June' => 'Junho',
- 'Last' => '@\'Ultimo',
- 'Last section in reading order' => '@\'Ultima
se@,address@hidden na ordem de leitura',
- 'March' => 'Mar@,{c}o',
- 'May' => 'Maio',
- 'Menu:' => '',
- 'Name' => 'Nome',
- 'Next' => 'address@hidden'oximo',
- 'Next chapter' => 'address@hidden'oximo
address@hidden'itulo',
- 'Next file' => '',
- 'Next node' => 'address@hidden'oximo nodo',
- 'Next section in reading order' =>
'address@hidden'oxima se@,address@hidden na ordem de leitura',
- 'Next section on same level' => 'address@hidden'oxima
se@,address@hidden no mesmo address@hidden'ivel',
- 'NextFile' => '',
- 'Node following in node reading order' => 'Nodo
seguinte na ordem de leitura de nodos',
- 'Node up' => 'Nodo acima',
- 'NodeNext' => 'address@hidden'oximo Nodo',
- 'NodePrev' => 'Nodo Anterior',
- 'NodeUp' => 'Nodo Acima',
- 'November' => 'Novembro',
- 'October' => 'Outubro',
- 'Overview' => 'address@hidden geral',
- 'Overview:' => 'address@hidden geral:',
- 'Prev' => 'address@hidden'evio',
- 'PrevFile' => '',
- 'Previous file' => '',
- 'Previous node' => 'Nodo anterior',
- 'Previous section in reading order' =>
'Se@,address@hidden anterior na ordem de leitura',
- 'Previous section on same level' => 'Se@,address@hidden
anterior no mesmo address@hidden'ivel',
- 'Section' => 'Se@,address@hidden',
- 'Section One' => 'Se@,address@hidden Um',
- 'See %{node_file_href}' => 'Veja %{node_file_href}',
- 'See %{node_file_href} @cite{%{book}}' => 'Veja
%{node_file_href} @cite{%{book}}',
- 'See %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'Veja %{node_file_href} se@,address@hidden `%{section}\' em
@cite{%{book}}',
- 'See %{reference_name}' => 'Veja %{reference_name}',
- 'See @cite{%{book}}' => 'Veja @cite{%{book}}',
- 'See section %{reference_name}' => 'Veja
se@,address@hidden %{reference_name}',
- 'See section `%{section}\' in @cite{%{book}}' => 'Veja
se@,address@hidden `%{section}\' em @cite{%{book}}',
- 'September' => 'Setembro',
- 'Short Table of Contents' => 'Breve
address@hidden'ario',
- 'Short table of contents' => 'Breve
address@hidden'ario',
- 'Subsection One-Four' => 'Subse@,address@hidden
Um-Quatro',
- 'Subsection One-One' => 'Subse@,address@hidden Um-Um',
- 'Subsection One-Three' => 'Subse@,address@hidden
address@hidden',
- 'Subsection One-Two' => 'Subse@,address@hidden Um-Dois',
- 'Subsubsection One-Two-Four' => 'Subse@,address@hidden
Um-Dois-Quatro',
- 'Subsubsection One-Two-One' => 'Subse@,address@hidden
Um-Dois-Um',
- 'Subsubsection One-Two-Three' => 'Subse@,address@hidden
address@hidden',
- 'Subsubsection One-Two-Two' => 'Subse@,address@hidden
Um-Dois-Dois',
- 'T2H_today' => '',
- 'Table of Contents' => 'address@hidden'ario',
- 'Table of contents' => 'address@hidden'ario',
- 'The node you are looking for is at %{href}.' => 'O
nodo que address@hidden address@hidden'a olhando address@hidden'a em %{href}.',
- 'This' => 'Esse',
- 'This document was generated by @emph{%{user}} on
@emph{%{date}} using @uref{%{program_homepage}, @emph{%{program}}}.' => 'Esse
documento foi gereado por @emph{%{user}} em @emph{%{date}} usando
@uref{%{program_homepage}, @emph{%{program}}}.',
- 'This document was generated by @emph{%{user}} using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Esse documento foi gerado
por @emph{%{user}} usando @uref{%{program_homepage}, @emph{%{program}}}.',
- 'This document was generated on @i{%{date}} using
@uref{%{program_homepage}, @i{%{program}}}.' => 'Esse documento foi gerado em
@i{%{date}} usando @uref{%{program_homepage}, @i{%{program}}}.',
- 'This document was generated using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Esse documento foi gerado
usando @uref{%{program_homepage}, @emph{%{program}}}.',
- 'Top' => 'Topo',
- 'Untitled Document' => 'Documento Sem Nome',
- 'Up' => 'Acima',
- 'Up node' => 'Nodo acima',
- 'Up section' => 'Se@,address@hidden acima',
- 'by @emph{%{user}}' => 'por @emph{%{user}}',
- 'by @emph{%{user}} on @emph{%{date}}' => 'por
@emph{%{user}} em @emph{%{date}}',
- 'current' => 'atual',
- 'on @emph{%{date}}' => 'em @emph{%{date}}',
- 'section `%{section}\' in @cite{%{book}}' =>
'se@,address@hidden `%{section}\' em @cite{%{book}}',
- 'see %{node_file_href}' => 'veja %{node_file_href}',
- 'see %{node_file_href} @cite{%{book}}' => 'veja
%{node_file_href} @cite{%{book}}',
- 'see %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'veja %{node_file_href} se@,address@hidden `%{section}\' em
@cite{%{book}}',
- 'see %{reference_name}' => 'veja %{reference_name}',
- 'see @cite{%{book}}' => 'veja @cite{%{book}}',
- 'see section %{reference_name}' => 'veja
se@,address@hidden %{reference_name}',
- 'see section `%{section}\' in @cite{%{book}}' => 'veja
se@,address@hidden `%{section}\' em @cite{%{book}}',
- 'unknown' => 'desconhecido'
- };
-
-$T2H_OBSOLETE_STRINGS->{'pt'} = {
- 'See' => 'Veja',
- 'about (help)' => 'sobre (ajuda)',
- 'beginning of this chapter or previous
chapter' => 'come@,{c}o desse address@hidden'itulo ou address@hidden'itulo
anterior',
- 'cover (top) of document' =>
'address@hidden'icio (topo) do documento',
- 'current section' => 'se@,address@hidden
atual',
- 'first section in reading order' =>
'primeira se@,address@hidden na ordem de leitura',
- 'following node' => 'nodo seguinte',
- 'index' => '@\'indice',
- 'last section in reading order' =>
'@\'ultima se@,address@hidden na ordem de leitura',
- 'next chapter' => 'address@hidden'oximo
address@hidden'itulo',
- 'next node' => 'address@hidden'oximo nodo',
- 'next section in reading order' =>
'address@hidden'oxima se@,address@hidden na ordem de leitura',
- 'next section on same level' =>
'address@hidden'oxima se@,address@hidden no mesmo address@hidden'ivel',
- 'node following in node reading order' =>
'nodo seguinte na ordem de leitura de nodos',
- 'node up' => 'nodo acima',
- 'previous node' => 'nodo anterior',
- 'previous section in reading order' =>
'se@,address@hidden anterior na ordem de leitura',
- 'previous section on same level' =>
'se@,address@hidden anterior no mesmo address@hidden'ivel',
- 'section' => 'Se@,address@hidden',
- 'see' => 'veja',
- 'short table of contents' => 'breve
address@hidden'ario',
- 'table of contents' => 'address@hidden'ario',
- 'up node' => 'nodo acima',
- 'up section' => 'se@,address@hidden acima'
+ 'Up' => '',
+ 'Up node' => '',
+ 'Up section' => '',
+ 'by @emph{%{user}}' => '@emph{%{user}}',
+ 'by @emph{%{user}} on @emph{%{date}}' =>
'@emph{%{user}}, @emph{%{date}',
+ 'current' => 'ç¾å¨ä½ç½®',
+ 'on @emph{%{date}}' => '@emph{%{date}}',
+ 'section `%{section}\' in @cite{%{book}}' =>
'@cite{%{book}}ã® `%{section}\' ',
+ 'see %{node_file_href}' => '%{node_file_href}åç
§',
+ 'see %{node_file_href} @cite{%{book}}' =>
'%{node_file_href} @cite{%{book}}åç
§',
+ 'see %{node_file_href} section `%{section}\' in
@cite{%{book}}' => '',
+ 'see %{reference_name}' => '',
+ 'see @cite{%{book}}' => '',
+ 'see section %{reference_name}' => '',
+ 'see section `%{section}\' in @cite{%{book}}' => '',
+ 'unknown' => 'ä¸æ'
+ };
+
+$T2H_OBSOLETE_STRINGS->{'ja'} = {
+ 'about (help)' => '使ç¨æ³ (ãã«ã)',
+ 'beginning of this chapter or previous
chapter' => 'ãã®ç« ã¾ãã¯åã®ç« ã®åé ',
+ 'cover (top) of document' =>
'ææ¸ã®è¡¨ç´ (ããã)',
+ 'current section' => 'ç¾å¨ã®ç¯',
+ 'first section in reading order' => 'ææ¸é
ã§åã®é
',
+ 'following node' => '次ã®ç¯',
+ 'index' => 'è¦åºã',
+ 'last section in reading order' => 'ææ¸é
ã§æå¾ã®é
',
+ 'next chapter' => '次ã®ç« ',
+ 'next node' => '次ã®ç¯',
+ 'next section in reading order' => 'ææ¸é
ã§æ¬¡ã®é
',
+ 'next section on same level' =>
'åãé層ã«ãã次ã®é
',
+ 'node following in node reading order' =>
'ææ¸é ã§æ¬¡ã®ç¯',
+ 'node up' => 'ä¸ã®ç¯ã¸',
+ 'previous node' => 'åã®ç¯',
+ 'previous section in reading order' =>
'ææ¸é ã§åã®ç¯',
+ 'previous section on same level' =>
'åãé層ã«ããåã®é
',
+ 'short table of contents' =>
'ç°¡ç¥åããç®æ¬¡',
+ 'table of contents' => 'ææ¸ã®ç®æ¬¡',
+ 'up node' => 'ä¸ã®ç¯',
+ 'up section' => 'ä¸ã®é
'
};
-$LANGUAGES->{'de'} = {
- ' The buttons in the navigation panels have the
following meaning:' => ' Die Links in der Navigationsleiste haben die folgende
Bedeutung: ',
- ' where the @strong{ Example } assumes that the
current position is at @strong{ Subsubsection One-Two-Three } of a document of
the following structure:' => ' wobei das @strong{ Beispiel } annimmt, dass die
aktuelle Position bei @strong{ Unterabschnitt 1-2-3 } in einem Dokument mit
folgender Struktur liegt:',
- ' Up ' => ' Nach oben ',
- '%{acronym_like} (%{explanation})' => '%{acronym_like}
(%{explanation})',
- '%{month} %{day}, %{year}' => '%{day}. %{month}
%{year}',
+$LANGUAGES->{'nl'} = {
+ ' The buttons in the navigation panels have the
following meaning:' => '',
+ ' where the @strong{ Example } assumes that the
current position is at @strong{ Subsubsection One-Two-Three } of a document of
the following structure:' => '',
+ ' Up ' => '',
+ '%{acronym_like} (%{explanation})' => '',
+ '%{month} %{day}, %{year}' => '',
'%{name} of %{class}' => '',
'%{name} on %{class}' => '',
'%{node_file_href}' => '',
'%{node_file_href} @cite{%{book}}' => '',
- '%{node_file_href} section `%{section}\' in
@cite{%{book}}' => '%{node_file_href} in Abschnitt `%{section}\' in
@cite{%{book}}',
- '%{reference_name}' => '%{reference_name}',
- '%{style} %{number}' => '%{style} %{number}',
- '%{style}: %{caption_first_line}' => '%{style}:
%{caption_first_line}',
- '%{style}: %{shortcaption_first_line}' => '%{style}:
%{shortcaption_first_line}',
- '@b{%{quotation_arg}:} ' => '@b{%{quotation_arg}:} ',
- '@cite{%{book}}' => '@cite{%{book}}',
- 'About' => '@"Uber',
- 'About (help)' => '@"Uber (Hilfe)',
- 'About This Document' => '@"Uber dieses Dokument',
+ '%{node_file_href} section `%{section}\' in
@cite{%{book}}' => '',
+ '%{reference_name}' => '',
+ '%{style} %{number}' => '',
+ '%{style}: %{caption_first_line}' => '',
+ '%{style}: %{shortcaption_first_line}' => '',
+ '@b{%{quotation_arg}:} ' => '',
+ '@cite{%{book}}' => '',
+ 'About' => '',
+ 'About (help)' => '',
+ 'About This Document' => 'No translation available!',
'April' => 'April',
- 'August' => 'August',
- 'Back' => 'Zur@"uck',
+ 'August' => 'Augustus',
+ 'Back' => '',
'Back section in previous file' => '',
- 'Beginning of this chapter or previous chapter' =>
'Anfang dieses oder des letzten Kapitels',
+ 'Beginning of this chapter or previous chapter' => '',
'Button' => '',
- 'Contents' => 'Inhalt',
- 'Cover (top) of document' => 'Titelseite des Dokuments',
- 'Current Position' => 'Aktuelle Position',
- 'Current section' => 'Aktueller Abschnitt',
- 'December' => 'Dezember',
+ 'Contents' => '',
+ 'Cover (top) of document' => '',
+ 'Current Position' => '',
+ 'Current section' => '',
+ 'December' => 'December',
'FastBack' => '',
'FastForward' => '',
- 'February' => 'Februar',
+ 'February' => 'Februari',
'First' => '',
- 'First section in reading order' => 'Erster Abschnitt
in Lesereihenfolge',
+ 'First section in reading order' => '',
'Following' => '',
- 'Following node' => 'N@"achster Knoten',
- 'Footnotes' => 'address@hidden',
- 'Forward' => 'Nach vorne',
+ 'Following node' => '',
+ 'Footnotes' => 'No translation available!',
+ 'Forward' => '',
'Forward section in next file' => '',
- 'From 1.2.3 go to' => 'Von 1.2.3 gehe zu',
- 'Go to' => 'Gehe zu',
+ 'From 1.2.3 go to' => '',
+ 'Go to' => '',
'Index' => 'Index',
- 'Index Entry' => 'Indexeintrag',
- 'January' => 'Januar',
+ 'Index Entry' => '',
+ 'January' => 'Januari',
'July' => 'Juli',
- 'Jump to' => 'Springe zu',
+ 'Jump to' => '',
'June' => 'Juni',
'Last' => '',
- 'Last section in reading order' => 'Letzter Abschnitt
in Lesereihenfolge',
- 'March' => 'M@"arz',
- 'May' => 'Mai',
- 'Menu:' => 'Auswahl:',
- 'Name' => 'Name',
+ 'Last section in reading order' => '',
+ 'March' => 'Maart',
+ 'May' => 'Mei',
+ 'Menu:' => '',
+ 'Name' => '',
'Next' => '',
- 'Next chapter' => 'N@"achstes Kapitel',
+ 'Next chapter' => '',
'Next file' => '',
- 'Next node' => 'N@"achster Knoten',
- 'Next section in reading order' => 'N@"achster
Abschnitt in Lesereihenfolge',
- 'Next section on same level' => 'N@"achster Abschitt
derselben Ebene',
+ 'Next node' => '',
+ 'Next section in reading order' => '',
+ 'Next section on same level' => '',
'NextFile' => '',
- 'Node following in node reading order' => 'N@"achster
Abschnitt in Lesereihenfolge',
- 'Node up' => 'Knoten nach oben',
+ 'Node following in node reading order' => '',
+ 'Node up' => '',
'NodeNext' => '',
'NodePrev' => '',
'NodeUp' => '',
'November' => 'November',
'October' => 'Oktober',
- 'Overview' => '@"Ubersicht',
- 'Overview:' => '@"Ubersicht:',
+ 'Overview' => '',
+ 'Overview:' => '',
'Prev' => '',
'PrevFile' => '',
'Previous file' => '',
- 'Previous node' => 'Voriger Knoten',
- 'Previous section in reading order' => 'Voriger
Abschnitt in Lesereihenfolge',
- 'Previous section on same level' => 'Voriger Abschnitt
derselben Ebene',
- 'Section' => 'Abschnitt',
- 'Section One' => 'Abschnitt 1',
- 'See %{node_file_href}' => 'Siehe %{node_file_href}',
- 'See %{node_file_href} @cite{%{book}}' => 'Siehe
%{node_file_href} @cite{%{book}}',
- 'See %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'Siehe %{node_file_href} in Abschnitt `%{section}\' in
@cite{%{book}}',
+ 'Previous node' => '',
+ 'Previous section in reading order' => '',
+ 'Previous section on same level' => '',
+ 'Section' => '',
+ 'Section One' => '',
+ 'See %{node_file_href}' => '',
+ 'See %{node_file_href} @cite{%{book}}' => '',
+ 'See %{node_file_href} section `%{section}\' in
@cite{%{book}}' => '',
'See %{reference_name}' => '',
'See @cite{%{book}}' => '',
'See section %{reference_name}' => '',
- 'See section `%{section}\' in @cite{%{book}}' => 'Siehe
Abschnitt `%{section}\' in @cite{%{book}}',
+ 'See section `%{section}\' in @cite{%{book}}' => '',
'September' => 'September',
- 'Short Table of Contents' => 'Kurzes
Inhaltsverzeichnis',
- 'Short table of contents' => 'Kurzes
Inhaltsverzeichnis',
- 'Subsection One-Four' => 'Unterabschnitt 1-4',
- 'Subsection One-One' => 'Unterabschnitt 1-1',
- 'Subsection One-Three' => 'Unterabschnitt 1-3',
- 'Subsection One-Two' => 'Unterabschnitt 1-2',
- 'Subsubsection One-Two-Four' => 'Unterabschnitt 1-2-4',
- 'Subsubsection One-Two-One' => 'Unterabschnitt 1-2-1',
- 'Subsubsection One-Two-Three' => 'Unterabschnitt 1-2-3',
- 'Subsubsection One-Two-Two' => 'Unterabschnitt 1-2-2',
+ 'Short Table of Contents' => 'Korte inhoudsopgave',
+ 'Short table of contents' => '',
+ 'Subsection One-Four' => '',
+ 'Subsection One-One' => '',
+ 'Subsection One-Three' => '',
+ 'Subsection One-Two' => '',
+ 'Subsubsection One-Two-Four' => '',
+ 'Subsubsection One-Two-One' => '',
+ 'Subsubsection One-Two-Three' => '',
+ 'Subsubsection One-Two-Two' => '',
'T2H_today' => '',
- 'Table of Contents' => 'Inhaltsverzeichnis',
- 'Table of contents' => 'Inhaltsverzeichnis',
- 'The node you are looking for is at %{href}.' => 'Der
Knoten, den Sie sehen, befindet sich bei %{href}',
+ 'Table of Contents' => 'Inhoudsopgave',
+ 'Table of contents' => '',
+ 'The node you are looking for is at %{href}.' => '',
'This' => '',
- 'This document was generated by @emph{%{user}} on
@emph{%{date}} using @uref{%{program_homepage}, @emph{%{program}}}.' => 'Dieses
Dokument wurde erzeugt von @emph{%{user}} am @emph{%{date}} durch
@uref{%{program_homepage}, @emph{%{program}}}.',
- 'This document was generated by @emph{%{user}} using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Dieses Dokument wurde
erzeugt von @emph{%{user}} durch @uref{%{program_homepage},
@emph{%{program}}}.',
- 'This document was generated on @i{%{date}} using
@uref{%{program_homepage}, @i{%{program}}}.' => 'Dieses Dokument wurde erzeugt
am @i{%{date}} durch @uref{%{program_homepage}, @i{%{program}}}.',
- 'This document was generated using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Dieses Dokument wurde
erzeugt durch @uref{%{program_homepage}, @emph{%{program}}}.',
- 'Top' => 'Anfang',
- 'Untitled Document' => 'Unbenanntes Dokumen',
- 'Up' => 'Nach oben',
- 'Up node' => 'Knoten nach oben',
- 'Up section' => 'Abschnitt nach oben',
- 'by @emph{%{user}}' => 'von @emph{%{user}}',
- 'by @emph{%{user}} on @emph{%{date}}' => 'von
@emph{%{user}} am @emph{%{date}}',
+ 'This document was generated by @emph{%{user}} on
@emph{%{date}} using @uref{%{program_homepage}, @emph{%{program}}}.' => '',
+ 'This document was generated by @emph{%{user}} using
@uref{%{program_homepage}, @emph{%{program}}}.' => '',
+ 'This document was generated on @i{%{date}} using
@uref{%{program_homepage}, @i{%{program}}}.' => '',
+ 'This document was generated using
@uref{%{program_homepage}, @emph{%{program}}}.' => '',
+ 'Top' => '',
+ 'Untitled Document' => '',
+ 'Up' => '',
+ 'Up node' => '',
+ 'Up section' => '',
+ 'by @emph{%{user}}' => '',
+ 'by @emph{%{user}} on @emph{%{date}}' => '',
'current' => '',
- 'on @emph{%{date}}' => 'am @emph{%{date}}',
- 'section `%{section}\' in @cite{%{book}}' => 'Abschnitt
`%{section}\' in @cite{%{book}}',
- 'see %{node_file_href}' => 'siehe %{node_file_href}',
- 'see %{node_file_href} @cite{%{book}}' => 'siehe
%{node_file_href} @cite{%{book}}',
- 'see %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'siehe %{node_file_href} im Abschnitt `%{section}\' in
@cite{%{book}}',
- 'see %{reference_name}' => 'siehe %{reference_name}',
- 'see @cite{%{book}}' => 'siehe @cite{%{book}}',
- 'see section %{reference_name}' => 'siehe Abschnitt
%{reference_name}',
- 'see section `%{section}\' in @cite{%{book}}' => 'siehe
Abschnitt `%{section}\' in @cite{%{book}}',
- 'unknown' => 'unbekannt'
+ 'on @emph{%{date}}' => '',
+ 'section `%{section}\' in @cite{%{book}}' => '',
+ 'see %{node_file_href}' => '',
+ 'see %{node_file_href} @cite{%{book}}' => '',
+ 'see %{node_file_href} section `%{section}\' in
@cite{%{book}}' => '',
+ 'see %{reference_name}' => '',
+ 'see @cite{%{book}}' => '',
+ 'see section %{reference_name}' => '',
+ 'see section `%{section}\' in @cite{%{book}}' => '',
+ 'unknown' => ''
};
-$T2H_OBSOLETE_STRINGS->{'de'} = {
- 'See' => 'Siehe',
- 'section' => 'Abschnitt',
- 'see' => 'siehe'
+$T2H_OBSOLETE_STRINGS->{'nl'} = {
+ 'See' => 'Zie',
+ 'section' => 'sectie',
+ 'see' => 'zie'
};
-$LANGUAGES->{'en'} = {
+$LANGUAGES->{'no'} = {
' The buttons in the navigation panels have the
following meaning:' => '',
' where the @strong{ Example } assumes that the
current position is at @strong{ Subsubsection One-Two-Three } of a document of
the following structure:' => '',
' Up ' => '',
@@ -921,9 +875,9 @@
'@cite{%{book}}' => '',
'About' => '',
'About (help)' => '',
- 'About This Document' => '',
- 'April' => '',
- 'August' => '',
+ 'About This Document' => 'No translation available!',
+ 'April' => 'april',
+ 'August' => 'august',
'Back' => '',
'Back section in previous file' => '',
'Beginning of this chapter or previous chapter' => '',
@@ -932,29 +886,29 @@
'Cover (top) of document' => '',
'Current Position' => '',
'Current section' => '',
- 'December' => '',
+ 'December' => 'desember',
'FastBack' => '',
'FastForward' => '',
- 'February' => '',
+ 'February' => 'februar',
'First' => '',
'First section in reading order' => '',
'Following' => '',
'Following node' => '',
- 'Footnotes' => '',
+ 'Footnotes' => 'No translation available!',
'Forward' => '',
'Forward section in next file' => '',
'From 1.2.3 go to' => '',
'Go to' => '',
- 'Index' => '',
+ 'Index' => 'Indeks',
'Index Entry' => '',
- 'January' => '',
- 'July' => '',
+ 'January' => 'januar',
+ 'July' => 'juli',
'Jump to' => '',
- 'June' => '',
+ 'June' => 'juni',
'Last' => '',
'Last section in reading order' => '',
- 'March' => '',
- 'May' => '',
+ 'March' => 'mars',
+ 'May' => 'mai',
'Menu:' => '',
'Name' => '',
'Next' => '',
@@ -969,8 +923,8 @@
'NodeNext' => '',
'NodePrev' => '',
'NodeUp' => '',
- 'November' => '',
- 'October' => '',
+ 'November' => 'november',
+ 'October' => 'oktober',
'Overview' => '',
'Overview:' => '',
'Prev' => '',
@@ -988,8 +942,8 @@
'See @cite{%{book}}' => '',
'See section %{reference_name}' => '',
'See section `%{section}\' in @cite{%{book}}' => '',
- 'September' => '',
- 'Short Table of Contents' => '',
+ 'September' => 'september',
+ 'Short Table of Contents' => 'Kort innholdsfortegnelse',
'Short table of contents' => '',
'Subsection One-Four' => '',
'Subsection One-One' => '',
@@ -999,8 +953,8 @@
'Subsubsection One-Two-One' => '',
'Subsubsection One-Two-Three' => '',
'Subsubsection One-Two-Two' => '',
- 'T2H_today' => '%s, %d %d',
- 'Table of Contents' => '',
+ 'T2H_today' => '',
+ 'Table of Contents' => 'Innholdsfortegnelse',
'Table of contents' => '',
'The node you are looking for is at %{href}.' => '',
'This' => '',
@@ -1028,272 +982,318 @@
'unknown' => ''
};
-$T2H_OBSOLETE_STRINGS->{'en'} = {};
+$T2H_OBSOLETE_STRINGS->{'no'} = {
+ 'See' => 'Se',
+ 'section' => 'avsnitt',
+ 'see' => 'se'
+ };
-$LANGUAGES->{'es'} = {
- ' The buttons in the navigation panels have the
following meaning:' => ' Los botones de los paneles de address@hidden'on
tienen el significado siguiente:',
- ' where the @strong{ Example } assumes that the
current position is at @strong{ Subsubsection One-Two-Three } of a document of
the following structure:' => ' donde el @strong{ Ejemplo } supone que la
posición actual está en la @strong{ address@hidden'on uno-dos-tres } de un
documento de la estructura siguiente:',
- ' Up ' => ' Subir ',
+$LANGUAGES->{'pt'} = {
+ ' The buttons in the navigation panels have the
following meaning:' => ' Os address@hidden nos address@hidden'eis de
navega@,address@hidden possuem os seguintes significados:',
+ ' where the @strong{ Example } assumes that the
current position is at @strong{ Subsubsection One-Two-Three } of a document of
the following structure:' => ' onde o @strong{ Exemplo } assume que a
posi@,address@hidden atual localiza-se em @strong{ Subsub@,address@hidden
address@hidden } de um documento com a seguinte estrutura:',
+ ' Up ' => ' Acima ',
'%{acronym_like} (%{explanation})' => '',
- '%{month} %{day}, %{year}' => 'el %{day} %{month}
%{year}',
- '%{name} of %{class}' => '%{name} de %{class}',
- '%{name} on %{class}' => '%{name} en %{class}',
+ '%{month} %{day}, %{year}' => '%{day} de %{month} de
%{year}',
+ '%{name} of %{class}' => '%{name} da %{class}',
+ '%{name} on %{class}' => '%{name} na %{class}',
'%{node_file_href}' => '',
'%{node_file_href} @cite{%{book}}' => '',
- '%{node_file_href} section `%{section}\' in
@cite{%{book}}' => '%{node_file_href} address@hidden'on `%{section}\' en
@cite{%{book}}',
+ '%{node_file_href} section `%{section}\' in
@cite{%{book}}' => '%{node_file_href} se@,address@hidden `%{section}\' em
@cite{%{book}}',
'%{reference_name}' => '',
'%{style} %{number}' => '',
'%{style}: %{caption_first_line}' => '',
'%{style}: %{shortcaption_first_line}' => '',
'@b{%{quotation_arg}:} ' => '',
'@cite{%{book}}' => '',
- 'About' => 'Acerca de',
- 'About (help)' => 'Acerca de (address@hidden'agina de
ayuda)',
- 'About This Document' => 'Acerca de este documento',
- 'April' => 'abril',
- 'August' => 'agosto',
- 'Back' => 'address@hidden'as',
- 'Back section in previous file' => 'Retroceder
address@hidden'on en el archivo anterior',
- 'Beginning of this chapter or previous chapter' =>
'Inicio de este address@hidden'itulo o address@hidden'itulo anterior',
- 'Button' => 'address@hidden'on',
- 'Contents' => '@\'Indice general',
- 'Cover (top) of document' => 'Portada del documento',
- 'Current Position' => 'address@hidden'on actual',
- 'Current section' => 'address@hidden'on actual',
- 'December' => 'diciembre',
- 'FastBack' => 'Retroceso address@hidden'apido',
- 'FastForward' => 'Avance address@hidden'apido',
- 'February' => 'febrero',
- 'First' => 'Primero',
- 'First section in reading order' => 'Primera
address@hidden'on en orden de lectura',
- 'Following' => 'Siguiente',
- 'Following node' => 'Nodo siguiente',
- 'Footnotes' => 'Notas el pie',
- 'Forward' => 'Adelante',
- 'Forward section in next file' => 'Avanzar
address@hidden'on en el address@hidden'oximo archivo',
- 'From 1.2.3 go to' => 'Desde 1.2.3 ir a',
- 'Go to' => 'Ir a',
+ 'About' => 'Sobre',
+ 'About (help)' => 'Sobre (ajuda)',
+ 'About This Document' => 'Sobre Esse Documento',
+ 'April' => 'Abril',
+ 'August' => 'Agosto',
+ 'Back' => 'Volta',
+ 'Back section in previous file' => '',
+ 'Beginning of this chapter or previous chapter' =>
'Come@,{c}o desse address@hidden'itulo ou address@hidden'itulo anterior',
+ 'Button' => 'address@hidden',
+ 'Contents' => 'address@hidden'udo',
+ 'Cover (top) of document' => 'address@hidden'icio
(topo) do documento',
+ 'Current Position' => 'Posi@,address@hidden Atual',
+ 'Current section' => 'Se@,address@hidden atual',
+ 'December' => 'Dezembro',
+ 'FastBack' => 'Voltar address@hidden'apido',
+ 'FastForward' => 'Avan@,{c}ar address@hidden'apido',
+ 'February' => 'Fevereiro',
+ 'First' => 'Primeiro',
+ 'First section in reading order' => 'Primeira
se@,address@hidden na ordem de leitura',
+ 'Following' => 'Seguinte',
+ 'Following node' => 'Nodo seguinte',
+ 'Footnotes' => 'Notas de address@hidden'e',
+ 'Forward' => 'Avan@,{c}ar',
+ 'Forward section in next file' => '',
+ 'From 1.2.3 go to' => 'De 1.2.3 address@hidden'a para',
+ 'Go to' => 'address@hidden'a para',
'Index' => '@\'Indice',
- 'Index Entry' => 'Entrada de @\'indice',
- 'January' => 'enero',
- 'July' => 'julio',
- 'Jump to' => 'Saltar a',
- 'June' => 'junio',
+ 'Index Entry' => 'Entrada de @\'Indice',
+ 'January' => 'Janeiro',
+ 'July' => 'Julho',
+ 'Jump to' => 'Pular para',
+ 'June' => 'Junho',
'Last' => '@\'Ultimo',
- 'Last section in reading order' => '@\'Ultima
address@hidden'on en orden de lectura',
- 'March' => 'marzo',
- 'May' => 'mayo',
- 'Menu:' => 'address@hidden'u:',
- 'Name' => 'Nombre',
- 'Next' => 'Siguiente',
- 'Next chapter' => 'address@hidden'itulo siguiente',
- 'Next file' => 'Archivo siguiente',
- 'Next node' => 'Nodo siguiente',
- 'Next section in reading order' => 'address@hidden'on
siguiente en orden de lectura',
- 'Next section on same level' => 'address@hidden'on
siguiente en el mismo nivel',
- 'NextFile' => 'ArchivoSiguiente',
- 'Node following in node reading order' => 'Nodo
siguiente en orden de lectura de nodos',
- 'Node up' => 'Subir nodo',
- 'NodeNext' => 'NodoSiguiente',
- 'NodePrev' => 'NodoAnterior',
- 'NodeUp' => 'SubirNodo',
- 'November' => 'noviembre',
- 'October' => 'octubre',
- 'Overview' => 'address@hidden'amica',
- 'Overview:' => 'address@hidden'amica:',
- 'Prev' => 'Ant',
- 'PrevFile' => 'ArchivoAnt',
- 'Previous file' => 'Archivo anterior',
+ 'Last section in reading order' => '@\'Ultima
se@,address@hidden na ordem de leitura',
+ 'March' => 'Mar@,{c}o',
+ 'May' => 'Maio',
+ 'Menu:' => '',
+ 'Name' => 'Nome',
+ 'Next' => 'address@hidden'oximo',
+ 'Next chapter' => 'address@hidden'oximo
address@hidden'itulo',
+ 'Next file' => '',
+ 'Next node' => 'address@hidden'oximo nodo',
+ 'Next section in reading order' =>
'address@hidden'oxima se@,address@hidden na ordem de leitura',
+ 'Next section on same level' => 'address@hidden'oxima
se@,address@hidden no mesmo address@hidden'ivel',
+ 'NextFile' => '',
+ 'Node following in node reading order' => 'Nodo
seguinte na ordem de leitura de nodos',
+ 'Node up' => 'Nodo acima',
+ 'NodeNext' => 'address@hidden'oximo Nodo',
+ 'NodePrev' => 'Nodo Anterior',
+ 'NodeUp' => 'Nodo Acima',
+ 'November' => 'Novembro',
+ 'October' => 'Outubro',
+ 'Overview' => 'address@hidden geral',
+ 'Overview:' => 'address@hidden geral:',
+ 'Prev' => 'address@hidden'evio',
+ 'PrevFile' => '',
+ 'Previous file' => '',
'Previous node' => 'Nodo anterior',
- 'Previous section in reading order' =>
'address@hidden'on anterior en orden de lectura',
- 'Previous section on same level' => 'address@hidden'on
anterior en el mismo nivel',
- 'Section' => 'address@hidden'on',
- 'Section One' => 'address@hidden'on Uno',
- 'See %{node_file_href}' => 'address@hidden'ease
%{node_file_href}',
- 'See %{node_file_href} @cite{%{book}}' =>
'address@hidden'ease %{node_file_href} @cite{%{book}}',
- 'See %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'address@hidden'ease %{node_file_href} address@hidden'on
`%{section}\' en @cite{%{book}}',
- 'See %{reference_name}' => 'address@hidden'ease
%{reference_name}',
- 'See @cite{%{book}}' => 'address@hidden'ease
@cite{%{book}}',
- 'See section %{reference_name}' => 'address@hidden'ease
la address@hidden'on %{reference_name}',
- 'See section `%{section}\' in @cite{%{book}}' =>
'address@hidden'ease la address@hidden'on `%{section}\' en @cite{%{book}}',
- 'September' => 'septiembre',
- 'Short Table of Contents' => 'Resumen del Contenido',
- 'Short table of contents' => 'Resumen del contenido',
- 'Subsection One-Four' => 'address@hidden'on uno-cuatro',
- 'Subsection One-One' => 'address@hidden'on uno-uno',
- 'Subsection One-Three' => 'address@hidden'on uno-tres',
- 'Subsection One-Two' => 'address@hidden'on uno-dos',
- 'Subsubsection One-Two-Four' => 'address@hidden'on
uno-dos-cuatro',
- 'Subsubsection One-Two-One' => 'address@hidden'on
uno-dos-uno',
- 'Subsubsection One-Two-Three' => 'address@hidden'on
uno-dos-tres',
- 'Subsubsection One-Two-Two' => 'address@hidden'on
uno-dos-dos',
- 'T2H_today' => '%2$d %1$s %3$d',
- 'Table of Contents' => '@\'address@hidden General',
- 'Table of contents' => '@\'address@hidden general',
- 'The node you are looking for is at %{href}.' => 'El
nodo que busca se encuentra en %{href}.',
- 'This' => 'Este',
- 'This document was generated by @emph{%{user}} on
@emph{%{date}} using @uref{%{program_homepage}, @emph{%{program}}}.' => 'Este
documento ha sido generado por @emph{%{user}} el @emph{%{date}} utilizando
@uref{%{program_homepage}, @emph{%{program}}}.',
- 'This document was generated by @emph{%{user}} using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Este documento ha sido
generado por @emph{%{user}} utilizando @uref{%{program_homepage},
@emph{%{program}}}.',
- 'This document was generated on @i{%{date}} using
@uref{%{program_homepage}, @i{%{program}}}.' => 'Este documento se generó el
@i{%{date}} utilizando @uref{%{program_homepage}, @i{%{program}}}.',
- 'This document was generated using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Este documento se generó
utilizando @uref{%{program_homepage}, @emph{%{program}}}.',
- 'Top' => 'Arriba',
- 'Untitled Document' => 'Documento sin
address@hidden'itulo',
- 'Up' => 'Subir',
- 'Up node' => 'Subir nodo',
- 'Up section' => 'Subir address@hidden'on',
- 'by @emph{%{user}}' => 'por @emph{%{user}',
- 'by @emph{%{user}} on @emph{%{date}}' => 'por
@emph{%{user}} el @emph{%{date}}',
- 'current' => 'actual',
- 'on @emph{%{date}}' => 'el @emph{%{date}}',
- 'section `%{section}\' in @cite{%{book}}' =>
'address@hidden'on `%{section}\' en @cite{%{book}}',
- 'see %{node_file_href}' => 'address@hidden'ease
%{node_file_href}',
- 'see %{node_file_href} @cite{%{book}}' =>
'address@hidden'ease %{node_file_href} @cite{%{book}}',
- 'see %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'address@hidden'ease %{node_file_href} address@hidden'on
`%{section}\' en @cite{%{book}}',
- 'see %{reference_name}' => 'address@hidden'ease
%{reference_name}',
- 'see @cite{%{book}}' => 'address@hidden'ease
@cite{%{book}}',
- 'see section %{reference_name}' => 'address@hidden'ease
la address@hidden'on %{reference_name}',
- 'see section `%{section}\' in @cite{%{book}}' =>
'address@hidden'ease la address@hidden'on `%{section}\' en @cite{%{book}}',
- 'unknown' => 'desconocido'
+ 'Previous section in reading order' =>
'Se@,address@hidden anterior na ordem de leitura',
+ 'Previous section on same level' => 'Se@,address@hidden
anterior no mesmo address@hidden'ivel',
+ 'Section' => 'Se@,address@hidden',
+ 'Section One' => 'Se@,address@hidden Um',
+ 'See %{node_file_href}' => 'Veja %{node_file_href}',
+ 'See %{node_file_href} @cite{%{book}}' => 'Veja
%{node_file_href} @cite{%{book}}',
+ 'See %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'Veja %{node_file_href} se@,address@hidden `%{section}\' em
@cite{%{book}}',
+ 'See %{reference_name}' => 'Veja %{reference_name}',
+ 'See @cite{%{book}}' => 'Veja @cite{%{book}}',
+ 'See section %{reference_name}' => 'Veja
se@,address@hidden %{reference_name}',
+ 'See section `%{section}\' in @cite{%{book}}' => 'Veja
se@,address@hidden `%{section}\' em @cite{%{book}}',
+ 'September' => 'Setembro',
+ 'Short Table of Contents' => 'Breve
address@hidden'ario',
+ 'Short table of contents' => 'Breve
address@hidden'ario',
+ 'Subsection One-Four' => 'Subse@,address@hidden
Um-Quatro',
+ 'Subsection One-One' => 'Subse@,address@hidden Um-Um',
+ 'Subsection One-Three' => 'Subse@,address@hidden
address@hidden',
+ 'Subsection One-Two' => 'Subse@,address@hidden Um-Dois',
+ 'Subsubsection One-Two-Four' => 'Subse@,address@hidden
Um-Dois-Quatro',
+ 'Subsubsection One-Two-One' => 'Subse@,address@hidden
Um-Dois-Um',
+ 'Subsubsection One-Two-Three' => 'Subse@,address@hidden
address@hidden',
+ 'Subsubsection One-Two-Two' => 'Subse@,address@hidden
Um-Dois-Dois',
+ 'T2H_today' => '',
+ 'Table of Contents' => 'address@hidden'ario',
+ 'Table of contents' => 'address@hidden'ario',
+ 'The node you are looking for is at %{href}.' => 'O
nodo que address@hidden address@hidden'a olhando address@hidden'a em %{href}.',
+ 'This' => 'Esse',
+ 'This document was generated by @emph{%{user}} on
@emph{%{date}} using @uref{%{program_homepage}, @emph{%{program}}}.' => 'Esse
documento foi gereado por @emph{%{user}} em @emph{%{date}} usando
@uref{%{program_homepage}, @emph{%{program}}}.',
+ 'This document was generated by @emph{%{user}} using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Esse documento foi gerado
por @emph{%{user}} usando @uref{%{program_homepage}, @emph{%{program}}}.',
+ 'This document was generated on @i{%{date}} using
@uref{%{program_homepage}, @i{%{program}}}.' => 'Esse documento foi gerado em
@i{%{date}} usando @uref{%{program_homepage}, @i{%{program}}}.',
+ 'This document was generated using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Esse documento foi gerado
usando @uref{%{program_homepage}, @emph{%{program}}}.',
+ 'Top' => 'Topo',
+ 'Untitled Document' => 'Documento Sem Nome',
+ 'Up' => 'Acima',
+ 'Up node' => 'Nodo acima',
+ 'Up section' => 'Se@,address@hidden acima',
+ 'by @emph{%{user}}' => 'por @emph{%{user}}',
+ 'by @emph{%{user}} on @emph{%{date}}' => 'por
@emph{%{user}} em @emph{%{date}}',
+ 'current' => 'atual',
+ 'on @emph{%{date}}' => 'em @emph{%{date}}',
+ 'section `%{section}\' in @cite{%{book}}' =>
'se@,address@hidden `%{section}\' em @cite{%{book}}',
+ 'see %{node_file_href}' => 'veja %{node_file_href}',
+ 'see %{node_file_href} @cite{%{book}}' => 'veja
%{node_file_href} @cite{%{book}}',
+ 'see %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'veja %{node_file_href} se@,address@hidden `%{section}\' em
@cite{%{book}}',
+ 'see %{reference_name}' => 'veja %{reference_name}',
+ 'see @cite{%{book}}' => 'veja @cite{%{book}}',
+ 'see section %{reference_name}' => 'veja
se@,address@hidden %{reference_name}',
+ 'see section `%{section}\' in @cite{%{book}}' => 'veja
se@,address@hidden `%{section}\' em @cite{%{book}}',
+ 'unknown' => 'desconhecido'
};
-$T2H_OBSOLETE_STRINGS->{'es'} = {
- 'See' => 'address@hidden'ease',
- 'section' => 'address@hidden'on',
- 'see' => 'address@hidden'ease'
+$T2H_OBSOLETE_STRINGS->{'pt'} = {
+ 'See' => 'Veja',
+ 'about (help)' => 'sobre (ajuda)',
+ 'beginning of this chapter or previous
chapter' => 'come@,{c}o desse address@hidden'itulo ou address@hidden'itulo
anterior',
+ 'cover (top) of document' =>
'address@hidden'icio (topo) do documento',
+ 'current section' => 'se@,address@hidden
atual',
+ 'first section in reading order' =>
'primeira se@,address@hidden na ordem de leitura',
+ 'following node' => 'nodo seguinte',
+ 'index' => '@\'indice',
+ 'last section in reading order' =>
'@\'ultima se@,address@hidden na ordem de leitura',
+ 'next chapter' => 'address@hidden'oximo
address@hidden'itulo',
+ 'next node' => 'address@hidden'oximo nodo',
+ 'next section in reading order' =>
'address@hidden'oxima se@,address@hidden na ordem de leitura',
+ 'next section on same level' =>
'address@hidden'oxima se@,address@hidden no mesmo address@hidden'ivel',
+ 'node following in node reading order' =>
'nodo seguinte na ordem de leitura de nodos',
+ 'node up' => 'nodo acima',
+ 'previous node' => 'nodo anterior',
+ 'previous section in reading order' =>
'se@,address@hidden anterior na ordem de leitura',
+ 'previous section on same level' =>
'se@,address@hidden anterior no mesmo address@hidden'ivel',
+ 'section' => 'Se@,address@hidden',
+ 'see' => 'veja',
+ 'short table of contents' => 'breve
address@hidden'ario',
+ 'table of contents' => 'address@hidden'ario',
+ 'up node' => 'nodo acima',
+ 'up section' => 'se@,address@hidden acima'
};
-$LANGUAGES->{'no'} = {
- ' The buttons in the navigation panels have the
following meaning:' => '',
- ' where the @strong{ Example } assumes that the
current position is at @strong{ Subsubsection One-Two-Three } of a document of
the following structure:' => '',
- ' Up ' => '',
+$LANGUAGES->{'pt_BR'} = {
+ ' The buttons in the navigation panels have the
following meaning:' => ' Os address@hidden nos address@hidden'eis de
navega@,address@hidden possuem os seguintes significados:',
+ ' where the @strong{ Example } assumes that the
current position is at @strong{ Subsubsection One-Two-Three } of a document of
the following structure:' => ' onde o @strong{ Exemplo } assume que a
posi@,address@hidden atual localiza-se em @strong{ Subsub@,address@hidden
address@hidden } de um documento com a seguinte estrutura:',
+ ' Up ' => ' Acima ',
'%{acronym_like} (%{explanation})' => '',
- '%{month} %{day}, %{year}' => '',
- '%{name} of %{class}' => '',
- '%{name} on %{class}' => '',
+ '%{month} %{day}, %{year}' => '%{day} de %{month} de
%{year}',
+ '%{name} of %{class}' => '%{name} da %{class}',
+ '%{name} on %{class}' => '%{name} na %{class}',
'%{node_file_href}' => '',
'%{node_file_href} @cite{%{book}}' => '',
- '%{node_file_href} section `%{section}\' in
@cite{%{book}}' => '',
+ '%{node_file_href} section `%{section}\' in
@cite{%{book}}' => '%{node_file_href} se@,address@hidden `%{section}\' em
@cite{%{book}}',
'%{reference_name}' => '',
'%{style} %{number}' => '',
'%{style}: %{caption_first_line}' => '',
'%{style}: %{shortcaption_first_line}' => '',
'@b{%{quotation_arg}:} ' => '',
'@cite{%{book}}' => '',
- 'About' => '',
- 'About (help)' => '',
- 'About This Document' => 'No translation available!',
- 'April' => 'april',
- 'August' => 'august',
- 'Back' => '',
+ 'About' => 'Sobre',
+ 'About (help)' => 'Sobre (ajuda)',
+ 'About This Document' => 'Sobre Esse Documento',
+ 'April' => 'Abril',
+ 'August' => 'Agosto',
+ 'Back' => 'Volta',
'Back section in previous file' => '',
- 'Beginning of this chapter or previous chapter' => '',
- 'Button' => '',
- 'Contents' => '',
- 'Cover (top) of document' => '',
- 'Current Position' => '',
- 'Current section' => '',
- 'December' => 'desember',
- 'FastBack' => '',
- 'FastForward' => '',
- 'February' => 'februar',
- 'First' => '',
- 'First section in reading order' => '',
- 'Following' => '',
- 'Following node' => '',
- 'Footnotes' => 'No translation available!',
- 'Forward' => '',
+ 'Beginning of this chapter or previous chapter' =>
'Come@,{c}o desse address@hidden'itulo ou address@hidden'itulo anterior',
+ 'Button' => 'address@hidden',
+ 'Contents' => 'address@hidden'udo',
+ 'Cover (top) of document' => 'address@hidden'icio
(topo) do documento',
+ 'Current Position' => 'Posi@,address@hidden Atual',
+ 'Current section' => 'Se@,address@hidden atual',
+ 'December' => 'Dezembro',
+ 'FastBack' => 'Voltar address@hidden'apido',
+ 'FastForward' => 'Avan@,{c}ar address@hidden'apido',
+ 'February' => 'Fevereiro',
+ 'First' => 'Primeiro',
+ 'First section in reading order' => 'Primeira
se@,address@hidden na ordem de leitura',
+ 'Following' => 'Seguinte',
+ 'Following node' => 'Nodo seguinte',
+ 'Footnotes' => 'Notas de address@hidden'e',
+ 'Forward' => 'Avan@,{c}ar',
'Forward section in next file' => '',
- 'From 1.2.3 go to' => '',
- 'Go to' => '',
- 'Index' => 'Indeks',
- 'Index Entry' => '',
- 'January' => 'januar',
- 'July' => 'juli',
- 'Jump to' => '',
- 'June' => 'juni',
- 'Last' => '',
- 'Last section in reading order' => '',
- 'March' => 'mars',
- 'May' => 'mai',
+ 'From 1.2.3 go to' => 'De 1.2.3 address@hidden'a
para',
+ 'Go to' => 'address@hidden'a para',
+ 'Index' => '@\'Indice',
+ 'Index Entry' => 'Entrada de @\'Indice',
+ 'January' => 'Janeiro',
+ 'July' => 'Julho',
+ 'Jump to' => 'Pular para',
+ 'June' => 'Junho',
+ 'Last' => '@\'Ultimo',
+ 'Last section in reading order' => '@\'Ultima
se@,address@hidden na ordem de leitura',
+ 'March' => 'Mar@,{c}o',
+ 'May' => 'Maio',
'Menu:' => '',
- 'Name' => '',
- 'Next' => '',
- 'Next chapter' => '',
+ 'Name' => 'Nome',
+ 'Next' => 'address@hidden'oximo',
+ 'Next chapter' => 'address@hidden'oximo
address@hidden'itulo',
'Next file' => '',
- 'Next node' => '',
- 'Next section in reading order' => '',
- 'Next section on same level' => '',
+ 'Next node' => 'address@hidden'oximo nodo',
+ 'Next section in reading order' =>
'address@hidden'oxima se@,address@hidden na ordem de leitura',
+ 'Next section on same level' =>
'address@hidden'oxima se@,address@hidden no mesmo address@hidden'ivel',
'NextFile' => '',
- 'Node following in node reading order' => '',
- 'Node up' => '',
- 'NodeNext' => '',
- 'NodePrev' => '',
- 'NodeUp' => '',
- 'November' => 'november',
- 'October' => 'oktober',
- 'Overview' => '',
- 'Overview:' => '',
- 'Prev' => '',
+ 'Node following in node reading order' => 'Nodo
seguinte na ordem de leitura de nodos',
+ 'Node up' => 'Nodo acima',
+ 'NodeNext' => 'address@hidden'oximo Nodo',
+ 'NodePrev' => 'Nodo Anterior',
+ 'NodeUp' => 'Nodo Acima',
+ 'November' => 'Novembro',
+ 'October' => 'Outubro',
+ 'Overview' => 'address@hidden geral',
+ 'Overview:' => 'address@hidden geral:',
+ 'Prev' => 'address@hidden'evio',
'PrevFile' => '',
'Previous file' => '',
- 'Previous node' => '',
- 'Previous section in reading order' => '',
- 'Previous section on same level' => '',
- 'Section' => '',
- 'Section One' => '',
- 'See %{node_file_href}' => '',
- 'See %{node_file_href} @cite{%{book}}' => '',
- 'See %{node_file_href} section `%{section}\' in
@cite{%{book}}' => '',
- 'See %{reference_name}' => '',
- 'See @cite{%{book}}' => '',
- 'See section %{reference_name}' => '',
- 'See section `%{section}\' in @cite{%{book}}' => '',
- 'September' => 'september',
- 'Short Table of Contents' => 'Kort innholdsfortegnelse',
- 'Short table of contents' => '',
- 'Subsection One-Four' => '',
- 'Subsection One-One' => '',
- 'Subsection One-Three' => '',
- 'Subsection One-Two' => '',
- 'Subsubsection One-Two-Four' => '',
- 'Subsubsection One-Two-One' => '',
- 'Subsubsection One-Two-Three' => '',
- 'Subsubsection One-Two-Two' => '',
+ 'Previous node' => 'Nodo anterior',
+ 'Previous section in reading order' =>
'Se@,address@hidden anterior na ordem de leitura',
+ 'Previous section on same level' =>
'Se@,address@hidden anterior no mesmo address@hidden'ivel',
+ 'Section' => 'Se@,address@hidden',
+ 'Section One' => 'Se@,address@hidden Um',
+ 'See %{node_file_href}' => 'Veja %{node_file_href}',
+ 'See %{node_file_href} @cite{%{book}}' => 'Veja
%{node_file_href} @cite{%{book}}',
+ 'See %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'Veja %{node_file_href} se@,address@hidden `%{section}\' em
@cite{%{book}}',
+ 'See %{reference_name}' => 'Veja %{reference_name}',
+ 'See @cite{%{book}}' => 'Veja @cite{%{book}}',
+ 'See section %{reference_name}' => 'Veja
se@,address@hidden %{reference_name}',
+ 'See section `%{section}\' in @cite{%{book}}' =>
'Veja se@,address@hidden `%{section}\' em @cite{%{book}}',
+ 'September' => 'Setembro',
+ 'Short Table of Contents' => 'Breve
address@hidden'ario',
+ 'Short table of contents' => 'Breve
address@hidden'ario',
+ 'Subsection One-Four' => 'Subse@,address@hidden
Um-Quatro',
+ 'Subsection One-One' => 'Subse@,address@hidden
Um-Um',
+ 'Subsection One-Three' => 'Subse@,address@hidden
address@hidden',
+ 'Subsection One-Two' => 'Subse@,address@hidden
Um-Dois',
+ 'Subsubsection One-Two-Four' =>
'Subse@,address@hidden Um-Dois-Quatro',
+ 'Subsubsection One-Two-One' =>
'Subse@,address@hidden Um-Dois-Um',
+ 'Subsubsection One-Two-Three' =>
'Subse@,address@hidden address@hidden',
+ 'Subsubsection One-Two-Two' =>
'Subse@,address@hidden Um-Dois-Dois',
'T2H_today' => '',
- 'Table of Contents' => 'Innholdsfortegnelse',
- 'Table of contents' => '',
- 'The node you are looking for is at %{href}.' => '',
- 'This' => '',
- 'This document was generated by @emph{%{user}} on
@emph{%{date}} using @uref{%{program_homepage}, @emph{%{program}}}.' => '',
- 'This document was generated by @emph{%{user}} using
@uref{%{program_homepage}, @emph{%{program}}}.' => '',
- 'This document was generated on @i{%{date}} using
@uref{%{program_homepage}, @i{%{program}}}.' => '',
- 'This document was generated using
@uref{%{program_homepage}, @emph{%{program}}}.' => '',
- 'Top' => '',
- 'Untitled Document' => '',
- 'Up' => '',
- 'Up node' => '',
- 'Up section' => '',
- 'by @emph{%{user}}' => '',
- 'by @emph{%{user}} on @emph{%{date}}' => '',
- 'current' => '',
- 'on @emph{%{date}}' => '',
- 'section `%{section}\' in @cite{%{book}}' => '',
- 'see %{node_file_href}' => '',
- 'see %{node_file_href} @cite{%{book}}' => '',
- 'see %{node_file_href} section `%{section}\' in
@cite{%{book}}' => '',
- 'see %{reference_name}' => '',
- 'see @cite{%{book}}' => '',
- 'see section %{reference_name}' => '',
- 'see section `%{section}\' in @cite{%{book}}' => '',
- 'unknown' => ''
+ 'Table of Contents' => 'address@hidden'ario',
+ 'Table of contents' => 'address@hidden'ario',
+ 'The node you are looking for is at %{href}.' => 'O
nodo que address@hidden address@hidden'a olhando address@hidden'a em %{href}.',
+ 'This' => 'Esse',
+ 'This document was generated by @emph{%{user}} on
@emph{%{date}} using @uref{%{program_homepage}, @emph{%{program}}}.' => 'Esse
documento foi gereado por @emph{%{user}} em @emph{%{date}} usando
@uref{%{program_homepage}, @emph{%{program}}}.',
+ 'This document was generated by @emph{%{user}} using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Esse documento foi gerado
por @emph{%{user}} usando @uref{%{program_homepage}, @emph{%{program}}}.',
+ 'This document was generated on @i{%{date}} using
@uref{%{program_homepage}, @i{%{program}}}.' => 'Esse documento foi gerado em
@i{%{date}} usando @uref{%{program_homepage}, @i{%{program}}}.',
+ 'This document was generated using
@uref{%{program_homepage}, @emph{%{program}}}.' => 'Esse documento foi gerado
usando @uref{%{program_homepage}, @emph{%{program}}}.',
+ 'Top' => 'Topo',
+ 'Untitled Document' => 'Documento Sem Nome',
+ 'Up' => 'Acima',
+ 'Up node' => 'Nodo acima',
+ 'Up section' => 'Se@,address@hidden acima',
+ 'by @emph{%{user}}' => 'por @emph{%{user}}',
+ 'by @emph{%{user}} on @emph{%{date}}' => 'por
@emph{%{user}} em @emph{%{date}}',
+ 'current' => 'atual',
+ 'on @emph{%{date}}' => 'em @emph{%{date}}',
+ 'section `%{section}\' in @cite{%{book}}' =>
'se@,address@hidden `%{section}\' em @cite{%{book}}',
+ 'see %{node_file_href}' => 'veja %{node_file_href}',
+ 'see %{node_file_href} @cite{%{book}}' => 'veja
%{node_file_href} @cite{%{book}}',
+ 'see %{node_file_href} section `%{section}\' in
@cite{%{book}}' => 'veja %{node_file_href} se@,address@hidden `%{section}\' em
@cite{%{book}}',
+ 'see %{reference_name}' => 'veja %{reference_name}',
+ 'see @cite{%{book}}' => 'veja @cite{%{book}}',
+ 'see section %{reference_name}' => 'veja
se@,address@hidden %{reference_name}',
+ 'see section `%{section}\' in @cite{%{book}}' =>
'veja se@,address@hidden `%{section}\' em @cite{%{book}}',
+ 'unknown' => 'desconhecido'
};
-$T2H_OBSOLETE_STRINGS->{'no'} = {
- 'See' => 'Se',
- 'section' => 'avsnitt',
- 'see' => 'se'
+$T2H_OBSOLETE_STRINGS->{'pt_BR'} = {
+ 'See' => 'Veja',
+ 'about (help)' => 'sobre (ajuda)',
+ 'beginning of this chapter or previous
chapter' => 'come@,{c}o desse address@hidden'itulo ou address@hidden'itulo
anterior',
+ 'cover (top) of document' =>
'address@hidden'icio (topo) do documento',
+ 'current section' => 'se@,address@hidden
atual',
+ 'first section in reading order' =>
'primeira se@,address@hidden na ordem de leitura',
+ 'following node' => 'nodo seguinte',
+ 'index' => '@\'indice',
+ 'last section in reading order' =>
'@\'ultima se@,address@hidden na ordem de leitura',
+ 'next chapter' => 'address@hidden'oximo
address@hidden'itulo',
+ 'next node' => 'address@hidden'oximo
nodo',
+ 'next section in reading order' =>
'address@hidden'oxima se@,address@hidden na ordem de leitura',
+ 'next section on same level' =>
'address@hidden'oxima se@,address@hidden no mesmo address@hidden'ivel',
+ 'node following in node reading order' =>
'nodo seguinte na ordem de leitura de nodos',
+ 'node up' => 'nodo acima',
+ 'previous node' => 'nodo anterior',
+ 'previous section in reading order' =>
'se@,address@hidden anterior na ordem de leitura',
+ 'previous section on same level' =>
'se@,address@hidden anterior no mesmo address@hidden'ivel',
+ 'section' => 'Se@,address@hidden',
+ 'see' => 'veja',
+ 'short table of contents' => 'breve
address@hidden'ario',
+ 'table of contents' =>
'address@hidden'ario',
+ 'up node' => 'nodo acima',
+ 'up section' => 'se@,address@hidden acima'
};
Index: Tests/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/Tests/Makefile.in,v
retrieving revision 1.49
retrieving revision 1.50
diff -u -b -r1.49 -r1.50
--- Tests/Makefile.in 14 Aug 2008 16:32:54 -0000 1.49
+++ Tests/Makefile.in 2 Jan 2009 04:02:32 -0000 1.50
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIR_TESTS = GermanNodeTest xemacs texinfo sectionning ccvs viper \
Index: doc/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/doc/Makefile.in,v
retrieving revision 1.44
retrieving revision 1.45
diff -u -b -r1.44 -r1.45
--- doc/Makefile.in 11 Jul 2008 23:47:49 -0000 1.44
+++ doc/Makefile.in 2 Jan 2009 04:02:32 -0000 1.45
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -153,7 +153,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
Index: doc/stamp-vti
===================================================================
RCS file: /cvsroot/texi2html/texi2html/doc/stamp-vti,v
retrieving revision 1.51
retrieving revision 1.52
diff -u -b -r1.51 -r1.52
--- doc/stamp-vti 2 Nov 2008 00:49:15 -0000 1.51
+++ doc/stamp-vti 2 Jan 2009 04:02:32 -0000 1.52
@@ -1,4 +1,4 @@
address@hidden UPDATED 1 November 2008
address@hidden UPDATED 3 November 2008
@set UPDATED-MONTH November 2008
address@hidden EDITION 1.79
address@hidden VERSION 1.79
address@hidden EDITION 1.80
address@hidden VERSION 1.80
Index: doc/version.texi
===================================================================
RCS file: /cvsroot/texi2html/texi2html/doc/version.texi,v
retrieving revision 1.51
retrieving revision 1.52
diff -u -b -r1.51 -r1.52
--- doc/version.texi 2 Nov 2008 00:49:16 -0000 1.51
+++ doc/version.texi 2 Jan 2009 04:02:32 -0000 1.52
@@ -1,4 +1,4 @@
address@hidden UPDATED 1 November 2008
address@hidden UPDATED 3 November 2008
@set UPDATED-MONTH November 2008
address@hidden EDITION 1.79
address@hidden VERSION 1.79
address@hidden EDITION 1.80
address@hidden VERSION 1.80
Index: test/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/Makefile.in,v
retrieving revision 1.5
retrieving revision 1.6
diff -u -b -r1.5 -r1.6
--- test/Makefile.in 1 Jan 2009 22:35:14 -0000 1.5
+++ test/Makefile.in 2 Jan 2009 04:02:32 -0000 1.6
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -136,7 +136,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = run_test.sh tests.sh $(TESTS) long_tests \
@@ -262,8 +261,8 @@
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
@@ -288,8 +287,8 @@
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
@@ -299,12 +298,13 @@
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
+ here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
Index: test/contents/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/contents/Makefile.in,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -b -r1.2 -r1.3
--- test/contents/Makefile.in 19 Aug 2008 15:05:50 -0000 1.2
+++ test/contents/Makefile.in 2 Jan 2009 04:02:33 -0000 1.3
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = contents_at_begin.texi contents_at_end.texi \
Index: test/coverage/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/coverage/Makefile.in,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -b -r1.2 -r1.3
--- test/coverage/Makefile.in 19 Aug 2008 15:05:50 -0000 1.2
+++ test/coverage/Makefile.in 2 Jan 2009 04:02:33 -0000 1.3
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = formatting.texi comments.texi pass0_macros.texi float.texi \
Index: test/encodings/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/encodings/Makefile.in,v
retrieving revision 1.4
retrieving revision 1.5
diff -u -b -r1.4 -r1.5
--- test/encodings/Makefile.in 23 Dec 2008 14:02:25 -0000 1.4
+++ test/encodings/Makefile.in 2 Jan 2009 04:02:33 -0000 1.5
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = nodetest.texi nodetest_latin1.texi nodetest_utf8.texi \
Index: test/formatting/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/formatting/Makefile.in,v
retrieving revision 1.7
retrieving revision 1.8
diff -u -b -r1.7 -r1.8
--- test/formatting/Makefile.in 1 Jan 2009 22:35:17 -0000 1.7
+++ test/formatting/Makefile.in 2 Jan 2009 04:02:33 -0000 1.8
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = def_cmds.texi menus.texi quotation.texi \
Index: test/htmlxref/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/htmlxref/Makefile.in,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -b -r1.2 -r1.3
--- test/htmlxref/Makefile.in 19 Aug 2008 15:05:51 -0000 1.2
+++ test/htmlxref/Makefile.in 2 Jan 2009 04:02:33 -0000 1.3
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = htmlxref.cnf \
Index: test/htmlxref-only_mono/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/htmlxref-only_mono/Makefile.in,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -b -r1.2 -r1.3
--- test/htmlxref-only_mono/Makefile.in 19 Aug 2008 15:05:51 -0000 1.2
+++ test/htmlxref-only_mono/Makefile.in 2 Jan 2009 04:02:33 -0000 1.3
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = htmlxref.cnf \
Index: test/htmlxref-only_split/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/htmlxref-only_split/Makefile.in,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -b -r1.2 -r1.3
--- test/htmlxref-only_split/Makefile.in 19 Aug 2008 15:05:51 -0000
1.2
+++ test/htmlxref-only_split/Makefile.in 2 Jan 2009 04:02:33 -0000
1.3
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = htmlxref.cnf \
Index: test/indices/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/indices/Makefile.in,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -b -r1.3 -r1.4
--- test/indices/Makefile.in 29 Aug 2008 15:06:00 -0000 1.3
+++ test/indices/Makefile.in 2 Jan 2009 04:02:34 -0000 1.4
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = index_table.texi index_no_node.texi \
Index: test/invalid/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/invalid/Makefile.in,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -b -r1.3 -r1.4
--- test/invalid/Makefile.in 25 Aug 2008 16:25:38 -0000 1.3
+++ test/invalid/Makefile.in 2 Jan 2009 04:02:34 -0000 1.4
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = brace_not_closed.texi recursive_copying.texi \
Index: test/layout/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/layout/Makefile.in,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -b -r1.2 -r1.3
--- test/layout/Makefile.in 19 Aug 2008 15:05:52 -0000 1.2
+++ test/layout/Makefile.in 2 Jan 2009 04:02:34 -0000 1.3
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = no_monolithic.texi navigation.texi formatting_regions.texi \
Index: test/macros/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/macros/Makefile.in,v
retrieving revision 1.4
retrieving revision 1.5
diff -u -b -r1.4 -r1.5
--- test/macros/Makefile.in 20 Nov 2008 12:02:37 -0000 1.4
+++ test/macros/Makefile.in 2 Jan 2009 04:02:34 -0000 1.5
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = macros.texi simple_macro.texi nested_macro_calls.texi \
Index: test/manuals/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/manuals/Makefile.in,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -b -r1.3 -r1.4
--- test/manuals/Makefile.in 29 Aug 2008 15:06:19 -0000 1.3
+++ test/manuals/Makefile.in 2 Jan 2009 04:02:34 -0000 1.4
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = cvs.texi info-stnd.texi texinfo.texi mini_ker.texi \
Index: test/many_input_files/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/many_input_files/Makefile.in,v
retrieving revision 1.5
retrieving revision 1.6
diff -u -b -r1.5 -r1.6
--- test/many_input_files/Makefile.in 16 Dec 2008 11:18:42 -0000 1.5
+++ test/many_input_files/Makefile.in 2 Jan 2009 04:02:34 -0000 1.6
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = $(TESTS) indices_res index_split_res tex_l2h_res tex_t4ht_res
Index: test/misc/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/misc/Makefile.in,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -b -r1.3 -r1.4
--- test/misc/Makefile.in 2 Nov 2008 00:49:21 -0000 1.3
+++ test/misc/Makefile.in 2 Jan 2009 04:02:35 -0000 1.4
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = testkb.texi viper.texi verbatim_html.texi templates.texi \
Index: test/nested_formats/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/nested_formats/Makefile.in,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -b -r1.2 -r1.3
--- test/nested_formats/Makefile.in 19 Aug 2008 15:05:53 -0000 1.2
+++ test/nested_formats/Makefile.in 2 Jan 2009 04:02:35 -0000 1.3
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = nested_formats.texi \
Index: test/sectionning/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/sectionning/Makefile.in,v
retrieving revision 1.7
retrieving revision 1.8
diff -u -b -r1.7 -r1.8
--- test/sectionning/Makefile.in 2 Nov 2008 00:49:22 -0000 1.7
+++ test/sectionning/Makefile.in 2 Jan 2009 04:02:35 -0000 1.8
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = sectionning.texi novalidate.texi first_section_no_node.texi \
Index: test/singular_manual/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/singular_manual/Makefile.in,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -b -r1.1 -r1.2
--- test/singular_manual/Makefile.in 18 Aug 2008 18:06:25 -0000 1.1
+++ test/singular_manual/Makefile.in 2 Jan 2009 04:02:35 -0000 1.2
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = \
Index: test/tar_manual/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/tar_manual/Makefile.in,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -b -r1.2 -r1.3
--- test/tar_manual/Makefile.in 19 Aug 2008 15:05:54 -0000 1.2
+++ test/tar_manual/Makefile.in 2 Jan 2009 04:02:35 -0000 1.3
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = \
Index: test/texi2html_manual/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/texi2html_manual/Makefile.in,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -b -r1.2 -r1.3
--- test/texi2html_manual/Makefile.in 19 Aug 2008 15:05:54 -0000 1.2
+++ test/texi2html_manual/Makefile.in 2 Jan 2009 04:02:35 -0000 1.3
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = custhtml.texi ifo.texi options.texi texi2html.texi \
Index: test/xemacs_manual/Makefile.in
===================================================================
RCS file: /cvsroot/texi2html/texi2html/test/xemacs_manual/Makefile.in,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -b -r1.1 -r1.2
--- test/xemacs_manual/Makefile.in 18 Aug 2008 18:09:40 -0000 1.1
+++ test/xemacs_manual/Makefile.in 2 Jan 2009 04:02:35 -0000 1.2
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -125,7 +125,6 @@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = \
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Texi2html-cvs] texi2html ChangeLog Makefile.in NEWS aclocal.m4...,
Derek Robert Price <=