[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[5302] Add more gettext related files.
From: |
Patrice Dumas |
Subject: |
[5302] Add more gettext related files. |
Date: |
Sun, 11 Aug 2013 13:20:03 +0000 |
Revision: 5302
http://svn.sv.gnu.org/viewvc/?view=rev&root=texinfo&revision=5302
Author: pertusus
Date: 2013-08-11 13:20:00 +0000 (Sun, 11 Aug 2013)
Log Message:
-----------
Add more gettext related files.
Added Paths:
-----------
trunk/texi2html/ABOUT-NLS
trunk/texi2html/config.rpath
Added: trunk/texi2html/ABOUT-NLS
===================================================================
--- trunk/texi2html/ABOUT-NLS (rev 0)
+++ trunk/texi2html/ABOUT-NLS 2013-08-11 13:20:00 UTC (rev 5302)
@@ -0,0 +1,1282 @@
+1 Notes on the Free Translation Project
+***************************************
+
+Free software is going international! The Free Translation Project is
+a way to get maintainers of free software, translators, and users all
+together, so that free software will gradually become able to speak many
+languages. A few packages already provide translations for their
+messages.
+
+ If you found this `ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU `gettext' internally,
+itself available at your nearest GNU archive site. But you do _not_
+need to install GNU `gettext' prior to configuring, installing or using
+this package with messages translated.
+
+ Installers will find here some useful hints. These notes also
+explain how users should proceed for getting the programs to use the
+available translations. They tell how people wanting to contribute and
+work on translations can contact the appropriate team.
+
+1.1 INSTALL Matters
+===================
+
+Some packages are "localizable" when properly installed; the programs
+they contain can be made to speak your own native language. Most such
+packages use GNU `gettext'. Other packages have their own ways to
+internationalization, predating GNU `gettext'.
+
+ By default, this package will be installed to allow translation of
+messages. It will automatically detect whether the system already
+provides the GNU `gettext' functions. Installers may use special
+options at configuration time for changing the default behaviour. The
+command:
+
+ ./configure --disable-nls
+
+will _totally_ disable translation of messages.
+
+ When you already have GNU `gettext' installed on your system and run
+configure without an option for your new package, `configure' will
+probably detect the previously built and installed `libintl' library
+and will decide to use it. If not, you may have to to use the
+`--with-libintl-prefix' option to tell `configure' where to look for it.
+
+ Internationalized packages usually have many `po/LL.po' files, where
+LL gives an ISO 639 two-letter code identifying the language. Unless
+translations have been forbidden at `configure' time by using the
+`--disable-nls' switch, all available translations are installed
+together with the package. However, the environment variable `LINGUAS'
+may be set, prior to configuration, to limit the installed set.
+`LINGUAS' should then contain a space separated list of two-letter
+codes, stating which languages are allowed.
+
+1.2 Using This Package
+======================
+
+As a user, if your language has been installed for this package, you
+only have to set the `LANG' environment variable to the appropriate
+`LL_CC' combination. If you happen to have the `LC_ALL' or some other
+`LC_xxx' environment variables set, you should unset them before
+setting `LANG', otherwise the setting of `LANG' will not have the
+desired effect. Here `LL' is an ISO 639 two-letter language code, and
+`CC' is an ISO 3166 two-letter country code. For example, let's
+suppose that you speak German and live in Germany. At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
+
+ You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries. For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
+country code serves to distinguish the dialects.
+
+ The locale naming convention of `LL_CC', with `LL' denoting the
+language and `CC' denoting the country, is the one use on systems based
+on GNU libc. On other systems, some variations of this scheme are
+used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
+locales supported by your system for your language by running the
+command `locale -a | grep '^LL''.
+
+ Not all programs have translations for all languages. By default, an
+English message is shown in place of a nonexistent translation. If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries. For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+ Special advice for Norwegian users: The language code for Norwegian
+bokma*l changed from `no' to `nb' recently (in 2003). During the
+transition period, while some message catalogs for this language are
+installed under `nb' and some older ones under `no', it's recommended
+for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
+older translations are used.
+
+ In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect. For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
+
+1.3 Translating Teams
+=====================
+
+For the Free Translation Project to be a success, we need interested
+people who like their own language and write it well, and who are also
+able to synergize with other translators speaking the same language.
+Each translation team has its own mailing list. The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://translationproject.org/', in the "Teams" area.
+
+ If you'd like to volunteer to _work_ at translating messages, you
+should become a member of the translating team for your own language.
+The subscribing address is _not_ the same as the list itself, it has
+`-request' appended. For example, speakers of Swedish can send a
+message to address@hidden', having this message body:
+
+ subscribe
+
+ Keep in mind that team members are expected to participate
+_actively_ in translations, or at solving translational difficulties,
+rather than merely lurking around. If your team does not exist yet and
+you want to start one, or if you are unsure about what to do or how to
+get started, please write to address@hidden' to
+reach the coordinator for all translator teams.
+
+ The English team is special. It works at improving and uniformizing
+the terminology in use. Proven linguistic skills are praised more than
+programming skills, here.
+
+1.4 Available Packages
+======================
+
+Languages are not equally supported in all packages. The following
+matrix shows the current state of internationalization, as of June
+2010. The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
+
+ Ready PO files af am an ar as ast az be address@hidden bg bn_IN bs
ca
+ +--------------------------------------------------+
+ a2ps | [] [] |
+ aegis | |
+ ant-phone | |
+ anubis | |
+ aspell | [] [] |
+ bash | |
+ bfd | |
+ bibshelf | [] |
+ binutils | |
+ bison | |
+ bison-runtime | [] |
+ bluez-pin | [] [] |
+ bombono-dvd | |
+ buzztard | |
+ cflow | |
+ clisp | |
+ coreutils | [] [] |
+ cpio | |
+ cppi | |
+ cpplib | [] |
+ cryptsetup | |
+ dfarc | |
+ dialog | [] [] |
+ dico | |
+ diffutils | [] |
+ dink | |
+ doodle | |
+ e2fsprogs | [] |
+ enscript | [] |
+ exif | |
+ fetchmail | [] |
+ findutils | [] |
+ flex | [] |
+ freedink | |
+ gas | |
+ gawk | [] [] |
+ gcal | [] |
+ gcc | |
+ gettext-examples | [] [] [] [] |
+ gettext-runtime | [] [] |
+ gettext-tools | [] [] |
+ gip | [] |
+ gjay | |
+ gliv | [] |
+ glunarclock | [] [] |
+ gnubiff | |
+ gnucash | [] |
+ gnuedu | |
+ gnulib | |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | |
+ gold | |
+ gpe-aerial | |
+ gpe-beam | |
+ gpe-bluetooth | |
+ gpe-calendar | |
+ gpe-clock | [] |
+ gpe-conf | |
+ gpe-contacts | |
+ gpe-edit | |
+ gpe-filemanager | |
+ gpe-go | |
+ gpe-login | |
+ gpe-ownerinfo | [] |
+ gpe-package | |
+ gpe-sketchbook | |
+ gpe-su | [] |
+ gpe-taskmanager | [] |
+ gpe-timesheet | [] |
+ gpe-today | [] |
+ gpe-todo | |
+ gphoto2 | |
+ gprof | [] |
+ gpsdrive | |
+ gramadoir | |
+ grep | |
+ grub | [] [] |
+ gsasl | |
+ gss | |
+ gst-plugins-bad | [] |
+ gst-plugins-base | [] |
+ gst-plugins-good | [] |
+ gst-plugins-ugly | [] |
+ gstreamer | [] [] [] |
+ gtick | |
+ gtkam | [] |
+ gtkorphan | [] |
+ gtkspell | [] [] [] |
+ gutenprint | |
+ hello | [] |
+ help2man | |
+ hylafax | |
+ idutils | |
+ indent | [] [] |
+ iso_15924 | |
+ iso_3166 | [] [] [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_4217 | |
+ iso_639 | [] [] [] [] |
+ iso_639_3 | |
+ jwhois | |
+ kbd | |
+ keytouch | [] |
+ keytouch-editor | |
+ keytouch-keyboa... | [] |
+ klavaro | [] |
+ latrine | |
+ ld | [] |
+ leafpad | [] [] |
+ libc | [] [] |
+ libexif | () |
+ libextractor | |
+ libgnutls | |
+ libgpewidget | |
+ libgpg-error | |
+ libgphoto2 | |
+ libgphoto2_port | |
+ libgsasl | |
+ libiconv | [] |
+ libidn | |
+ lifelines | |
+ liferea | [] [] |
+ lilypond | |
+ linkdr | [] |
+ lordsawar | |
+ lprng | |
+ lynx | [] |
+ m4 | |
+ mailfromd | |
+ mailutils | |
+ make | |
+ man-db | |
+ man-db-manpages | |
+ minicom | |
+ mkisofs | |
+ myserver | |
+ nano | [] [] |
+ opcodes | |
+ parted | |
+ pies | |
+ popt | |
+ psmisc | |
+ pspp | [] |
+ pwdutils | |
+ radius | [] |
+ recode | [] [] |
+ rosegarden | |
+ rpm | |
+ rush | |
+ sarg | |
+ screem | |
+ scrollkeeper | [] [] [] |
+ sed | [] [] |
+ sharutils | [] [] |
+ shishi | |
+ skencil | |
+ solfege | |
+ solfege-manual | |
+ soundtracker | |
+ sp | |
+ sysstat | |
+ tar | [] |
+ texinfo | |
+ tin | |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux-ng | [] |
+ vice | |
+ vmm | |
+ vorbis-tools | |
+ wastesedge | |
+ wdiff | |
+ wget | [] [] |
+ wyslij-po | |
+ xchat | [] [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] |
+ +--------------------------------------------------+
+ af am an ar as ast az be address@hidden bg bn_IN bs
ca
+ 6 0 1 2 3 19 1 10 3 28 3 1 38
+
+ crh cs da de el en en_GB en_ZA eo es et eu fa
+ +-------------------------------------------------+
+ a2ps | [] [] [] [] [] [] [] |
+ aegis | [] [] [] |
+ ant-phone | [] () |
+ anubis | [] [] |
+ aspell | [] [] [] [] [] |
+ bash | [] [] [] |
+ bfd | [] |
+ bibshelf | [] [] [] |
+ binutils | [] |
+ bison | [] [] |
+ bison-runtime | [] [] [] [] |
+ bluez-pin | [] [] [] [] [] [] |
+ bombono-dvd | [] |
+ buzztard | [] [] [] |
+ cflow | [] [] |
+ clisp | [] [] [] [] |
+ coreutils | [] [] [] [] |
+ cpio | |
+ cppi | |
+ cpplib | [] [] [] |
+ cryptsetup | [] |
+ dfarc | [] [] [] |
+ dialog | [] [] [] [] [] |
+ dico | |
+ diffutils | [] [] [] [] [] [] |
+ dink | [] [] [] |
+ doodle | [] |
+ e2fsprogs | [] [] [] |
+ enscript | [] [] [] |
+ exif | () [] [] |
+ fetchmail | [] [] () [] [] [] |
+ findutils | [] [] [] |
+ flex | [] [] |
+ freedink | [] [] [] |
+ gas | [] |
+ gawk | [] [] [] |
+ gcal | [] |
+ gcc | [] [] |
+ gettext-examples | [] [] [] [] |
+ gettext-runtime | [] [] [] [] |
+ gettext-tools | [] [] [] |
+ gip | [] [] [] [] |
+ gjay | [] |
+ gliv | [] [] [] |
+ glunarclock | [] [] |
+ gnubiff | () |
+ gnucash | [] () () () () |
+ gnuedu | [] [] |
+ gnulib | [] [] |
+ gnunet | |
+ gnunet-gtk | [] |
+ gnutls | [] [] |
+ gold | [] |
+ gpe-aerial | [] [] [] [] |
+ gpe-beam | [] [] [] [] |
+ gpe-bluetooth | [] [] |
+ gpe-calendar | [] |
+ gpe-clock | [] [] [] [] |
+ gpe-conf | [] [] [] |
+ gpe-contacts | [] [] [] |
+ gpe-edit | [] [] |
+ gpe-filemanager | [] [] [] |
+ gpe-go | [] [] [] [] |
+ gpe-login | [] [] |
+ gpe-ownerinfo | [] [] [] [] |
+ gpe-package | [] [] [] |
+ gpe-sketchbook | [] [] [] [] |
+ gpe-su | [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] |
+ gpe-timesheet | [] [] [] [] |
+ gpe-today | [] [] [] [] |
+ gpe-todo | [] [] [] |
+ gphoto2 | [] [] () [] [] [] |
+ gprof | [] [] [] |
+ gpsdrive | [] [] [] |
+ gramadoir | [] [] [] |
+ grep | [] |
+ grub | [] [] |
+ gsasl | [] |
+ gss | |
+ gst-plugins-bad | [] [] [] [] [] |
+ gst-plugins-base | [] [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] [] [] |
+ gstreamer | [] [] [] [] [] |
+ gtick | [] () [] |
+ gtkam | [] [] () [] [] |
+ gtkorphan | [] [] [] [] |
+ gtkspell | [] [] [] [] [] [] [] |
+ gutenprint | [] [] [] |
+ hello | [] [] [] [] |
+ help2man | [] |
+ hylafax | [] [] |
+ idutils | [] [] |
+ indent | [] [] [] [] [] [] [] |
+ iso_15924 | [] () [] [] |
+ iso_3166 | [] [] [] [] () [] [] [] () |
+ iso_3166_2 | () |
+ iso_4217 | [] [] [] () [] [] |
+ iso_639 | [] [] [] [] () [] [] |
+ iso_639_3 | [] |
+ jwhois | [] |
+ kbd | [] [] [] [] [] |
+ keytouch | [] [] |
+ keytouch-editor | [] [] |
+ keytouch-keyboa... | [] |
+ klavaro | [] [] [] [] |
+ latrine | [] () |
+ ld | [] [] |
+ leafpad | [] [] [] [] [] [] |
+ libc | [] [] [] [] |
+ libexif | [] [] () |
+ libextractor | |
+ libgnutls | [] |
+ libgpewidget | [] [] |
+ libgpg-error | [] [] |
+ libgphoto2 | [] () |
+ libgphoto2_port | [] () [] |
+ libgsasl | |
+ libiconv | [] [] [] [] [] |
+ libidn | [] [] [] |
+ lifelines | [] () |
+ liferea | [] [] [] [] [] |
+ lilypond | [] [] [] |
+ linkdr | [] [] [] |
+ lordsawar | [] |
+ lprng | |
+ lynx | [] [] [] [] |
+ m4 | [] [] [] [] |
+ mailfromd | |
+ mailutils | [] |
+ make | [] [] [] |
+ man-db | |
+ man-db-manpages | |
+ minicom | [] [] [] [] |
+ mkisofs | |
+ myserver | |
+ nano | [] [] [] |
+ opcodes | [] [] |
+ parted | [] [] |
+ pies | |
+ popt | [] [] [] [] [] |
+ psmisc | [] [] [] |
+ pspp | [] |
+ pwdutils | [] |
+ radius | [] |
+ recode | [] [] [] [] [] [] |
+ rosegarden | () () () |
+ rpm | [] [] [] |
+ rush | |
+ sarg | |
+ screem | |
+ scrollkeeper | [] [] [] [] [] |
+ sed | [] [] [] [] [] [] |
+ sharutils | [] [] [] [] |
+ shishi | |
+ skencil | [] () [] |
+ solfege | [] [] [] |
+ solfege-manual | [] [] |
+ soundtracker | [] [] [] |
+ sp | [] |
+ sysstat | [] [] [] |
+ tar | [] [] [] [] |
+ texinfo | [] [] [] |
+ tin | [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux-ng | [] [] [] [] |
+ vice | () () |
+ vmm | [] |
+ vorbis-tools | [] [] |
+ wastesedge | [] |
+ wdiff | [] [] |
+ wget | [] [] [] |
+ wyslij-po | |
+ xchat | [] [] [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] [] [] [] |
+ +-------------------------------------------------+
+ crh cs da de el en en_GB en_ZA eo es et eu fa
+ 5 64 105 117 18 1 8 0 28 89 18 19 0
+
+ fi fr ga gl gu he hi hr hu hy id is it ja ka kn
+ +----------------------------------------------------+
+ a2ps | [] [] [] [] |
+ aegis | [] [] |
+ ant-phone | [] [] |
+ anubis | [] [] [] [] |
+ aspell | [] [] [] [] |
+ bash | [] [] [] [] |
+ bfd | [] [] [] |
+ bibshelf | [] [] [] [] [] |
+ binutils | [] [] [] |
+ bison | [] [] [] [] |
+ bison-runtime | [] [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] [] [] [] |
+ bombono-dvd | [] |
+ buzztard | [] |
+ cflow | [] [] [] |
+ clisp | [] |
+ coreutils | [] [] [] [] [] |
+ cpio | [] [] [] [] |
+ cppi | [] [] |
+ cpplib | [] [] [] |
+ cryptsetup | [] [] [] |
+ dfarc | [] [] [] |
+ dialog | [] [] [] [] [] [] [] |
+ dico | |
+ diffutils | [] [] [] [] [] [] [] [] [] |
+ dink | [] |
+ doodle | [] [] |
+ e2fsprogs | [] [] |
+ enscript | [] [] [] [] |
+ exif | [] [] [] [] [] [] |
+ fetchmail | [] [] [] [] |
+ findutils | [] [] [] [] [] [] |
+ flex | [] [] [] |
+ freedink | [] [] [] |
+ gas | [] [] |
+ gawk | [] [] [] [] () [] |
+ gcal | [] |
+ gcc | [] |
+ gettext-examples | [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] |
+ gip | [] [] [] [] [] [] |
+ gjay | [] |
+ gliv | [] () |
+ glunarclock | [] [] [] [] |
+ gnubiff | () [] () |
+ gnucash | () () () () () [] |
+ gnuedu | [] [] |
+ gnulib | [] [] [] [] [] [] |
+ gnunet | |
+ gnunet-gtk | [] |
+ gnutls | [] [] |
+ gold | [] [] |
+ gpe-aerial | [] [] [] |
+ gpe-beam | [] [] [] [] |
+ gpe-bluetooth | [] [] [] [] |
+ gpe-calendar | [] [] |
+ gpe-clock | [] [] [] [] [] |
+ gpe-conf | [] [] [] [] |
+ gpe-contacts | [] [] [] [] |
+ gpe-edit | [] [] [] |
+ gpe-filemanager | [] [] [] [] |
+ gpe-go | [] [] [] [] [] |
+ gpe-login | [] [] [] |
+ gpe-ownerinfo | [] [] [] [] [] |
+ gpe-package | [] [] [] |
+ gpe-sketchbook | [] [] [] [] |
+ gpe-su | [] [] [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] [] |
+ gpe-timesheet | [] [] [] [] [] |
+ gpe-today | [] [] [] [] [] [] [] |
+ gpe-todo | [] [] [] |
+ gphoto2 | [] [] [] [] [] [] |
+ gprof | [] [] [] [] |
+ gpsdrive | [] [] [] |
+ gramadoir | [] [] [] |
+ grep | [] [] |
+ grub | [] [] [] [] |
+ gsasl | [] [] [] [] [] |
+ gss | [] [] [] [] [] |
+ gst-plugins-bad | [] [] [] [] [] [] |
+ gst-plugins-base | [] [] [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] [] [] |
+ gstreamer | [] [] [] [] [] |
+ gtick | [] [] [] [] [] |
+ gtkam | [] [] [] [] [] |
+ gtkorphan | [] [] [] |
+ gtkspell | [] [] [] [] [] [] [] [] [] |
+ gutenprint | [] [] [] [] |
+ hello | [] [] [] |
+ help2man | [] [] |
+ hylafax | [] |
+ idutils | [] [] [] [] [] [] |
+ indent | [] [] [] [] [] [] [] [] |
+ iso_15924 | [] () [] [] |
+ iso_3166 | [] () [] [] [] [] [] [] [] [] [] [] |
+ iso_3166_2 | () [] [] [] |
+ iso_4217 | [] () [] [] [] [] |
+ iso_639 | [] () [] [] [] [] [] [] [] |
+ iso_639_3 | () [] [] |
+ jwhois | [] [] [] [] [] |
+ kbd | [] [] |
+ keytouch | [] [] [] [] [] [] |
+ keytouch-editor | [] [] [] [] [] |
+ keytouch-keyboa... | [] [] [] [] [] |
+ klavaro | [] [] |
+ latrine | [] [] [] |
+ ld | [] [] [] [] |
+ leafpad | [] [] [] [] [] [] [] () |
+ libc | [] [] [] [] [] |
+ libexif | [] |
+ libextractor | |
+ libgnutls | [] [] |
+ libgpewidget | [] [] [] [] |
+ libgpg-error | [] [] |
+ libgphoto2 | [] [] [] |
+ libgphoto2_port | [] [] [] |
+ libgsasl | [] [] [] [] [] |
+ libiconv | [] [] [] [] [] [] |
+ libidn | [] [] [] [] |
+ lifelines | () |
+ liferea | [] [] [] [] |
+ lilypond | [] [] |
+ linkdr | [] [] [] [] [] |
+ lordsawar | |
+ lprng | [] |
+ lynx | [] [] [] [] [] |
+ m4 | [] [] [] [] [] [] |
+ mailfromd | |
+ mailutils | [] [] |
+ make | [] [] [] [] [] [] [] [] [] |
+ man-db | [] [] |
+ man-db-manpages | [] |
+ minicom | [] [] [] [] [] |
+ mkisofs | [] [] [] [] |
+ myserver | |
+ nano | [] [] [] [] [] [] |
+ opcodes | [] [] [] [] |
+ parted | [] [] [] [] |
+ pies | |
+ popt | [] [] [] [] [] [] [] [] [] |
+ psmisc | [] [] [] |
+ pspp | |
+ pwdutils | [] [] |
+ radius | [] [] |
+ recode | [] [] [] [] [] [] [] [] |
+ rosegarden | () () () () () |
+ rpm | [] [] |
+ rush | |
+ sarg | [] |
+ screem | [] [] |
+ scrollkeeper | [] [] [] [] |
+ sed | [] [] [] [] [] [] [] [] |
+ sharutils | [] [] [] [] [] [] [] |
+ shishi | [] |
+ skencil | [] |
+ solfege | [] [] [] [] |
+ solfege-manual | [] [] |
+ soundtracker | [] [] |
+ sp | [] () |
+ sysstat | [] [] [] [] [] |
+ tar | [] [] [] [] [] [] [] |
+ texinfo | [] [] [] [] |
+ tin | [] |
+ unicode-han-tra... | |
+ unicode-transla... | [] [] |
+ util-linux-ng | [] [] [] [] [] [] |
+ vice | () () () |
+ vmm | [] |
+ vorbis-tools | [] |
+ wastesedge | () () |
+ wdiff | [] |
+ wget | [] [] [] [] [] [] [] [] |
+ wyslij-po | [] [] [] |
+ xchat | [] [] [] [] [] [] [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] [] [] |
+ +----------------------------------------------------+
+ fi fr ga gl gu he hi hr hu hy id is it ja ka kn
+ 105 121 53 20 4 8 3 5 53 2 120 5 84 67 0 4
+
+ ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
+ +-----------------------------------------------+
+ a2ps | [] |
+ aegis | |
+ ant-phone | |
+ anubis | [] [] |
+ aspell | [] |
+ bash | |
+ bfd | |
+ bibshelf | [] [] |
+ binutils | |
+ bison | [] |
+ bison-runtime | [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] |
+ bombono-dvd | |
+ buzztard | |
+ cflow | |
+ clisp | |
+ coreutils | [] |
+ cpio | |
+ cppi | |
+ cpplib | |
+ cryptsetup | |
+ dfarc | [] |
+ dialog | [] [] [] [] [] |
+ dico | |
+ diffutils | [] [] |
+ dink | |
+ doodle | |
+ e2fsprogs | |
+ enscript | |
+ exif | [] |
+ fetchmail | |
+ findutils | |
+ flex | |
+ freedink | [] |
+ gas | |
+ gawk | |
+ gcal | |
+ gcc | |
+ gettext-examples | [] [] [] [] |
+ gettext-runtime | [] |
+ gettext-tools | [] |
+ gip | [] [] |
+ gjay | |
+ gliv | |
+ glunarclock | [] |
+ gnubiff | |
+ gnucash | () () () () |
+ gnuedu | |
+ gnulib | |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | [] |
+ gold | |
+ gpe-aerial | [] |
+ gpe-beam | [] |
+ gpe-bluetooth | [] [] |
+ gpe-calendar | [] |
+ gpe-clock | [] [] [] [] [] |
+ gpe-conf | [] [] |
+ gpe-contacts | [] [] |
+ gpe-edit | [] |
+ gpe-filemanager | [] [] |
+ gpe-go | [] [] [] |
+ gpe-login | [] |
+ gpe-ownerinfo | [] [] |
+ gpe-package | [] [] |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] [] [] |
+ gpe-timesheet | [] [] |
+ gpe-today | [] [] [] [] |
+ gpe-todo | [] [] |
+ gphoto2 | |
+ gprof | [] |
+ gpsdrive | |
+ gramadoir | |
+ grep | |
+ grub | |
+ gsasl | |
+ gss | |
+ gst-plugins-bad | [] [] [] [] |
+ gst-plugins-base | [] [] |
+ gst-plugins-good | [] [] |
+ gst-plugins-ugly | [] [] [] [] [] |
+ gstreamer | |
+ gtick | |
+ gtkam | [] |
+ gtkorphan | [] [] |
+ gtkspell | [] [] [] [] [] [] [] |
+ gutenprint | |
+ hello | [] [] [] |
+ help2man | |
+ hylafax | |
+ idutils | |
+ indent | |
+ iso_15924 | [] [] |
+ iso_3166 | [] [] () [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_4217 | [] [] |
+ iso_639 | [] [] |
+ iso_639_3 | [] |
+ jwhois | [] |
+ kbd | |
+ keytouch | [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | [] |
+ klavaro | [] |
+ latrine | [] |
+ ld | |
+ leafpad | [] [] [] |
+ libc | [] |
+ libexif | |
+ libextractor | |
+ libgnutls | [] |
+ libgpewidget | [] [] |
+ libgpg-error | |
+ libgphoto2 | |
+ libgphoto2_port | |
+ libgsasl | |
+ libiconv | |
+ libidn | |
+ lifelines | |
+ liferea | |
+ lilypond | |
+ linkdr | |
+ lordsawar | |
+ lprng | |
+ lynx | |
+ m4 | |
+ mailfromd | |
+ mailutils | |
+ make | [] |
+ man-db | |
+ man-db-manpages | |
+ minicom | [] |
+ mkisofs | |
+ myserver | |
+ nano | [] [] |
+ opcodes | |
+ parted | |
+ pies | |
+ popt | [] [] [] |
+ psmisc | |
+ pspp | |
+ pwdutils | |
+ radius | |
+ recode | |
+ rosegarden | |
+ rpm | |
+ rush | |
+ sarg | |
+ screem | |
+ scrollkeeper | [] [] |
+ sed | |
+ sharutils | |
+ shishi | |
+ skencil | |
+ solfege | [] |
+ solfege-manual | |
+ soundtracker | |
+ sp | |
+ sysstat | [] |
+ tar | [] |
+ texinfo | [] |
+ tin | |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux-ng | |
+ vice | |
+ vmm | |
+ vorbis-tools | |
+ wastesedge | |
+ wdiff | |
+ wget | [] |
+ wyslij-po | |
+ xchat | [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] |
+ +-----------------------------------------------+
+ ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
+ 20 5 10 1 13 48 4 2 2 4 24 10 20 3 1
+
+ nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr
+ +---------------------------------------------------+
+ a2ps | [] [] [] [] [] [] [] [] |
+ aegis | [] [] [] |
+ ant-phone | [] [] |
+ anubis | [] [] [] |
+ aspell | [] [] [] [] [] |
+ bash | [] [] |
+ bfd | [] |
+ bibshelf | [] [] |
+ binutils | [] [] |
+ bison | [] [] [] |
+ bison-runtime | [] [] [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] [] [] [] |
+ bombono-dvd | [] () |
+ buzztard | [] [] |
+ cflow | [] |
+ clisp | [] [] |
+ coreutils | [] [] [] [] [] [] |
+ cpio | [] [] [] |
+ cppi | [] |
+ cpplib | [] |
+ cryptsetup | [] |
+ dfarc | [] |
+ dialog | [] [] [] [] |
+ dico | [] |
+ diffutils | [] [] [] [] [] [] |
+ dink | () |
+ doodle | [] [] |
+ e2fsprogs | [] [] |
+ enscript | [] [] [] [] [] |
+ exif | [] [] [] () [] |
+ fetchmail | [] [] [] [] |
+ findutils | [] [] [] [] [] |
+ flex | [] [] [] [] [] |
+ freedink | [] [] |
+ gas | |
+ gawk | [] [] [] [] |
+ gcal | |
+ gcc | [] |
+ gettext-examples | [] [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] [] [] |
+ gip | [] [] [] [] [] |
+ gjay | |
+ gliv | [] [] [] [] [] [] |
+ glunarclock | [] [] [] [] [] |
+ gnubiff | [] () |
+ gnucash | [] () () () |
+ gnuedu | [] |
+ gnulib | [] [] [] [] |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | [] [] |
+ gold | |
+ gpe-aerial | [] [] [] [] [] [] [] |
+ gpe-beam | [] [] [] [] [] [] [] |
+ gpe-bluetooth | [] [] |
+ gpe-calendar | [] [] [] [] |
+ gpe-clock | [] [] [] [] [] [] [] [] |
+ gpe-conf | [] [] [] [] [] [] [] |
+ gpe-contacts | [] [] [] [] [] |
+ gpe-edit | [] [] [] |
+ gpe-filemanager | [] [] [] |
+ gpe-go | [] [] [] [] [] [] [] [] |
+ gpe-login | [] [] |
+ gpe-ownerinfo | [] [] [] [] [] [] [] [] |
+ gpe-package | [] [] |
+ gpe-sketchbook | [] [] [] [] [] [] [] |
+ gpe-su | [] [] [] [] [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] [] [] [] [] |
+ gpe-timesheet | [] [] [] [] [] [] [] [] |
+ gpe-today | [] [] [] [] [] [] [] [] |
+ gpe-todo | [] [] [] [] [] |
+ gphoto2 | [] [] [] [] [] [] [] [] |
+ gprof | [] [] [] |
+ gpsdrive | [] [] |
+ gramadoir | [] [] |
+ grep | [] [] [] [] |
+ grub | [] [] [] |
+ gsasl | [] [] [] [] |
+ gss | [] [] [] |
+ gst-plugins-bad | [] [] [] [] [] [] |
+ gst-plugins-base | [] [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] [] [] |
+ gstreamer | [] [] [] [] [] |
+ gtick | [] [] [] |
+ gtkam | [] [] [] [] [] [] |
+ gtkorphan | [] |
+ gtkspell | [] [] [] [] [] [] [] [] [] [] |
+ gutenprint | [] [] |
+ hello | [] [] [] [] |
+ help2man | [] [] |
+ hylafax | [] |
+ idutils | [] [] [] [] [] |
+ indent | [] [] [] [] [] [] [] |
+ iso_15924 | [] [] [] [] |
+ iso_3166 | [] [] [] [] [] () [] [] [] [] [] [] [] [] |
+ iso_3166_2 | [] [] [] |
+ iso_4217 | [] [] [] [] [] [] [] [] |
+ iso_639 | [] [] [] [] [] [] [] [] [] |
+ iso_639_3 | [] [] |
+ jwhois | [] [] [] [] |
+ kbd | [] [] [] |
+ keytouch | [] [] [] |
+ keytouch-editor | [] [] [] |
+ keytouch-keyboa... | [] [] [] |
+ klavaro | [] [] |
+ latrine | [] [] |
+ ld | |
+ leafpad | [] [] [] [] [] [] [] [] [] |
+ libc | [] [] [] [] |
+ libexif | [] [] () [] |
+ libextractor | |
+ libgnutls | [] [] |
+ libgpewidget | [] [] [] |
+ libgpg-error | [] [] |
+ libgphoto2 | [] [] |
+ libgphoto2_port | [] [] [] [] [] |
+ libgsasl | [] [] [] [] [] |
+ libiconv | [] [] [] [] [] |
+ libidn | [] [] |
+ lifelines | [] [] |
+ liferea | [] [] [] [] [] () () [] |
+ lilypond | [] |
+ linkdr | [] [] [] |
+ lordsawar | |
+ lprng | [] |
+ lynx | [] [] [] |
+ m4 | [] [] [] [] [] |
+ mailfromd | [] |
+ mailutils | [] |
+ make | [] [] [] [] |
+ man-db | [] [] [] |
+ man-db-manpages | [] [] [] |
+ minicom | [] [] [] [] |
+ mkisofs | [] [] [] |
+ myserver | |
+ nano | [] [] [] [] |
+ opcodes | [] [] |
+ parted | [] [] [] [] |
+ pies | [] |
+ popt | [] [] [] [] |
+ psmisc | [] [] [] |
+ pspp | [] [] |
+ pwdutils | [] |
+ radius | [] [] [] |
+ recode | [] [] [] [] [] [] [] [] |
+ rosegarden | () () |
+ rpm | [] [] [] |
+ rush | [] [] |
+ sarg | |
+ screem | |
+ scrollkeeper | [] [] [] [] [] [] [] [] |
+ sed | [] [] [] [] [] [] [] [] [] |
+ sharutils | [] [] [] [] |
+ shishi | [] |
+ skencil | [] [] |
+ solfege | [] [] [] [] |
+ solfege-manual | [] [] [] |
+ soundtracker | [] |
+ sp | |
+ sysstat | [] [] [] [] |
+ tar | [] [] [] [] |
+ texinfo | [] [] [] [] |
+ tin | [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux-ng | [] [] [] [] [] |
+ vice | [] |
+ vmm | [] |
+ vorbis-tools | [] [] |
+ wastesedge | [] |
+ wdiff | [] [] |
+ wget | [] [] [] [] [] [] [] |
+ wyslij-po | [] [] [] |
+ xchat | [] [] [] [] [] [] [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] |
+ +---------------------------------------------------+
+ nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr
+ 135 10 4 7 105 1 29 62 47 91 3 54 46 9 37
+
+ sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW
+ +---------------------------------------------------+
+ a2ps | [] [] [] [] [] |
27
+ aegis | [] |
9
+ ant-phone | [] [] [] [] |
9
+ anubis | [] [] [] [] |
15
+ aspell | [] [] [] |
20
+ bash | [] [] [] |
12
+ bfd | [] |
6
+ bibshelf | [] [] [] |
16
+ binutils | [] [] |
8
+ bison | [] [] |
12
+ bison-runtime | [] [] [] [] [] [] |
29
+ bluez-pin | [] [] [] [] [] [] [] [] |
37
+ bombono-dvd | [] |
4
+ buzztard | [] |
7
+ cflow | [] [] [] |
9
+ clisp | |
10
+ coreutils | [] [] [] [] |
22
+ cpio | [] [] [] [] [] [] |
13
+ cppi | [] [] |
5
+ cpplib | [] [] [] [] [] [] |
14
+ cryptsetup | [] [] |
7
+ dfarc | [] |
9
+ dialog | [] [] [] [] [] [] [] |
30
+ dico | [] |
2
+ diffutils | [] [] [] [] [] [] |
30
+ dink | |
4
+ doodle | [] [] |
7
+ e2fsprogs | [] [] [] |
11
+ enscript | [] [] [] [] |
17
+ exif | [] [] [] |
16
+ fetchmail | [] [] [] |
17
+ findutils | [] [] [] [] [] |
20
+ flex | [] [] [] [] |
15
+ freedink | [] |
10
+ gas | [] |
4
+ gawk | [] [] [] [] |
18
+ gcal | [] [] |
5
+ gcc | [] [] [] |
7
+ gettext-examples | [] [] [] [] [] [] [] |
34
+ gettext-runtime | [] [] [] [] [] [] [] |
29
+ gettext-tools | [] [] [] [] [] [] |
22
+ gip | [] [] [] [] |
22
+ gjay | [] |
3
+ gliv | [] [] [] |
14
+ glunarclock | [] [] [] [] [] |
19
+ gnubiff | [] [] |
4
+ gnucash | () [] () [] () |
10
+ gnuedu | [] [] |
7
+ gnulib | [] [] [] [] |
16
+ gnunet | [] |
1
+ gnunet-gtk | [] [] [] |
5
+ gnutls | [] [] [] |
10
+ gold | [] |
4
+ gpe-aerial | [] [] [] |
18
+ gpe-beam | [] [] [] |
19
+ gpe-bluetooth | [] [] [] |
13
+ gpe-calendar | [] [] [] [] |
12
+ gpe-clock | [] [] [] [] [] |
28
+ gpe-conf | [] [] [] [] |
20
+ gpe-contacts | [] [] [] |
17
+ gpe-edit | [] [] [] |
12
+ gpe-filemanager | [] [] [] [] |
16
+ gpe-go | [] [] [] [] [] |
25
+ gpe-login | [] [] [] |
11
+ gpe-ownerinfo | [] [] [] [] [] |
25
+ gpe-package | [] [] [] |
13
+ gpe-sketchbook | [] [] [] |
20
+ gpe-su | [] [] [] [] [] |
30
+ gpe-taskmanager | [] [] [] [] [] |
29
+ gpe-timesheet | [] [] [] [] [] |
25
+ gpe-today | [] [] [] [] [] [] |
30
+ gpe-todo | [] [] [] [] |
17
+ gphoto2 | [] [] [] [] [] |
24
+ gprof | [] [] [] |
15
+ gpsdrive | [] [] [] |
11
+ gramadoir | [] [] [] |
11
+ grep | [] [] [] |
10
+ grub | [] [] [] |
14
+ gsasl | [] [] [] [] |
14
+ gss | [] [] [] |
11
+ gst-plugins-bad | [] [] [] [] |
26
+ gst-plugins-base | [] [] [] [] [] |
24
+ gst-plugins-good | [] [] [] [] |
24
+ gst-plugins-ugly | [] [] [] [] [] |
29
+ gstreamer | [] [] [] [] |
22
+ gtick | [] [] [] |
13
+ gtkam | [] [] [] |
20
+ gtkorphan | [] [] [] |
14
+ gtkspell | [] [] [] [] [] [] [] [] [] |
45
+ gutenprint | [] |
10
+ hello | [] [] [] [] [] [] |
21
+ help2man | [] [] |
7
+ hylafax | [] |
5
+ idutils | [] [] [] [] |
17
+ indent | [] [] [] [] [] [] |
30
+ iso_15924 | () [] () [] [] |
16
+ iso_3166 | [] [] () [] [] () [] [] [] () |
53
+ iso_3166_2 | () [] () [] |
9
+ iso_4217 | [] () [] [] () [] [] |
26
+ iso_639 | [] [] [] () [] () [] [] [] [] |
38
+ iso_639_3 | [] () |
8
+ jwhois | [] [] [] [] [] |
16
+ kbd | [] [] [] [] [] |
15
+ keytouch | [] [] [] |
16
+ keytouch-editor | [] [] [] |
14
+ keytouch-keyboa... | [] [] [] |
14
+ klavaro | [] |
11
+ latrine | [] [] [] |
10
+ ld | [] [] [] [] |
11
+ leafpad | [] [] [] [] [] [] |
33
+ libc | [] [] [] [] [] |
21
+ libexif | [] () |
7
+ libextractor | [] |
1
+ libgnutls | [] [] [] |
9
+ libgpewidget | [] [] [] |
14
+ libgpg-error | [] [] [] |
9
+ libgphoto2 | [] [] |
8
+ libgphoto2_port | [] [] [] [] |
14
+ libgsasl | [] [] [] |
13
+ libiconv | [] [] [] [] |
21
+ libidn | () [] [] |
11
+ lifelines | [] |
4
+ liferea | [] [] [] |
21
+ lilypond | [] |
7
+ linkdr | [] [] [] [] [] |
17
+ lordsawar | |
1
+ lprng | [] |
3
+ lynx | [] [] [] [] |
17
+ m4 | [] [] [] [] |
19
+ mailfromd | [] [] |
3
+ mailutils | [] |
5
+ make | [] [] [] [] |
21
+ man-db | [] [] [] |
8
+ man-db-manpages | |
4
+ minicom | [] [] |
16
+ mkisofs | [] [] |
9
+ myserver | | 0
+ nano | [] [] [] [] |
21
+ opcodes | [] [] [] |
11
+ parted | [] [] [] [] [] |
15
+ pies | [] [] |
3
+ popt | [] [] [] [] [] [] |
27
+ psmisc | [] [] |
11
+ pspp | |
4
+ pwdutils | [] [] |
6
+ radius | [] [] |
9
+ recode | [] [] [] [] |
28
+ rosegarden | () | 0
+ rpm | [] [] [] |
11
+ rush | [] [] |
4
+ sarg | |
1
+ screem | [] |
3
+ scrollkeeper | [] [] [] [] [] |
27
+ sed | [] [] [] [] [] |
30
+ sharutils | [] [] [] [] [] |
22
+ shishi | [] |
3
+ skencil | [] [] |
7
+ solfege | [] [] [] [] |
16
+ solfege-manual | [] |
8
+ soundtracker | [] [] [] |
9
+ sp | [] |
3
+ sysstat | [] [] |
15
+ tar | [] [] [] [] [] [] |
23
+ texinfo | [] [] [] [] [] |
17
+ tin | |
4
+ unicode-han-tra... | | 0
+ unicode-transla... | |
2
+ util-linux-ng | [] [] [] [] |
20
+ vice | () () |
1
+ vmm | [] |
4
+ vorbis-tools | [] |
6
+ wastesedge | |
2
+ wdiff | [] [] |
7
+ wget | [] [] [] [] [] |
26
+ wyslij-po | [] [] |
8
+ xchat | [] [] [] [] [] [] |
36
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] |
63
+ xkeyboard-config | [] [] [] |
22
+ +---------------------------------------------------+
+ 85 teams sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW
+ 178 domains 119 1 3 3 0 10 65 51 155 17 98 7 41
2618
+
+ Some counters in the preceding matrix are higher than the number of
+visible blocks let us expect. This is because a few extra PO files are
+used for implementing regional variants of languages, or language
+dialects.
+
+ For a PO file in the matrix above to be effective, the package to
+which it applies should also have been internationalized and
+distributed as such by its maintainer. There might be an observable
+lag between the mere existence a PO file and its wide availability in a
+distribution.
+
+ If June 2010 seems to be old, you may fetch a more recent copy of
+this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date
+matrix with full percentage details can be found at
+`http://translationproject.org/extra/matrix.html'.
+
+1.5 Using `gettext' in new packages
+===================================
+
+If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package. Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library. This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+ Once the sources are changed appropriately and the setup can handle
+the use of `gettext' the only thing missing are the translations. The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project. Therefore the information given above
+applies also for every other Free Software Project. Contact
address@hidden' to make the `.pot' files available
+to the translation teams.
+
Added: trunk/texi2html/config.rpath
===================================================================
--- trunk/texi2html/config.rpath (rev 0)
+++ trunk/texi2html/config.rpath 2013-08-11 13:20:00 UTC (rev 5302)
@@ -0,0 +1,690 @@
+#! /bin/sh
+# Output a system dependent set of variables, describing how to set the
+# run time search path of shared libraries in an executable.
+#
+# Copyright 1996-2013 Free Software Foundation, Inc.
+# Taken from GNU libtool, 2001
+# Originally by Gordon Matzigkeit <address@hidden>, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+#
+# The first argument passed to this file is the canonical host specification,
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+# should be set by the caller.
+#
+# The set of defined variables is at the end of this script.
+
+# Known limitations:
+# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
+# than 256 bytes, otherwise the compiler driver will dump core. The only
+# known workaround is to choose shorter directory names for the build
+# directory and/or the installation directory.
+
+# All known linkers require a '.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+shrext=.so
+
+host="$1"
+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+# Code taken from libtool.m4's _LT_CC_BASENAME.
+
+for cc_temp in $CC""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
+
+# Code taken from libtool.m4's _LT_COMPILER_PIC.
+
+wl=
+if test "$GCC" = yes; then
+ wl='-Wl,'
+else
+ case "$host_os" in
+ aix*)
+ wl='-Wl,'
+ ;;
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ wl='-Wl,'
+ ;;
+ irix5* | irix6* | nonstopux*)
+ wl='-Wl,'
+ ;;
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ ecc*)
+ wl='-Wl,'
+ ;;
+ icc* | ifort*)
+ wl='-Wl,'
+ ;;
+ lf95*)
+ wl='-Wl,'
+ ;;
+ nagfor*)
+ wl='-Wl,-Wl,,'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ wl='-Wl,'
+ ;;
+ ccc*)
+ wl='-Wl,'
+ ;;
+ xl* | bgxl* | bgf* | mpixl*)
+ wl='-Wl,'
+ ;;
+ como)
+ wl='-lopt='
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ F* | *Sun*Fortran*)
+ wl=
+ ;;
+ *Sun\ C*)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ newsos6)
+ ;;
+ *nto* | *qnx*)
+ ;;
+ osf3* | osf4* | osf5*)
+ wl='-Wl,'
+ ;;
+ rdos*)
+ ;;
+ solaris*)
+ case $cc_basename in
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ wl='-Qoption ld '
+ ;;
+ *)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ sunos4*)
+ wl='-Qoption ld '
+ ;;
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ wl='-Wl,'
+ ;;
+ sysv4*MP*)
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ wl='-Wl,'
+ ;;
+ unicos*)
+ wl='-Wl,'
+ ;;
+ uts4*)
+ ;;
+ esac
+fi
+
+# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
+
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+
+case "$host_os" in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ # Unlike libtool, we use -rpath here, not --rpath, since the documented
+ # option of GNU ld is called -rpath, not --rpath.
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ case "$host_os" in
+ aix[3-9]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ fi
+ ;;
+ amigaos*)
+ case "$host_cpu" in
+ powerpc)
+ ;;
+ m68k)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+ beos*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ cygwin* | mingw* | pw32* | cegcc*)
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ haiku*)
+ ;;
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ netbsd*)
+ ;;
+ solaris*)
+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null;
then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null;
then
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo
${wl}-rpath,$libdir`'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+ sunos4*)
+ hardcode_direct=yes
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ if test "$ld_shlibs" = no; then
+ hardcode_libdir_flag_spec=
+ fi
+else
+ case "$host_os" in
+ aix3*)
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ else
+ aix_use_runtimelinking=no
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+ fi
+ hardcode_direct=yes
+ hardcode_libdir_separator=':'
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ fi
+ # Begin _LT_AC_SYS_LIBPATH_AIX.
+ echo 'int main () { return 0; }' > conftest.c
+ ${CC} ${LDFLAGS} conftest.c -o conftest
+ aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File
Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File
Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ fi
+ if test -z "$aix_libpath"; then
+ aix_libpath="/usr/lib:/lib"
+ fi
+ rm -f conftest.c conftest
+ # End _LT_AC_SYS_LIBPATH_AIX.
+ if test "$aix_use_runtimelinking" = yes; then
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ else
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ fi
+ fi
+ ;;
+ amigaos*)
+ case "$host_cpu" in
+ powerpc)
+ ;;
+ m68k)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+ bsdi[45]*)
+ ;;
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ libext=lib
+ ;;
+ darwin* | rhapsody*)
+ hardcode_direct=no
+ if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; };
then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ dgux*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ freebsd2.2*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ freebsd2*)
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ freebsd* | dragonfly*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ hpux9*)
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ hpux10*)
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+ hpux11*)
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ ;;
+ *)
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+ irix5* | irix6* | nonstopux*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ netbsd*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ newsos6)
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ *nto* | *qnx*)
+ ;;
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ else
+ case "$host_os" in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ osf3*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ osf4* | osf5*)
+ if test "$GCC" = yes; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ # Both cc and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ hardcode_libdir_separator=:
+ ;;
+ solaris*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ sunos4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ sysv4)
+ case $host_vendor in
+ sni)
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ hardcode_direct=no
+ ;;
+ motorola)
+ hardcode_direct=no #Motorola manual says yes, but my tests say they
lie
+ ;;
+ esac
+ ;;
+ sysv4.3*)
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ ld_shlibs=yes
+ fi
+ ;;
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* |
sco3.2v5.0.[024]*)
+ ;;
+ sysv5* | sco3.2v5* | sco5v6*)
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo
${wl}-R,$libdir`'
+ hardcode_libdir_separator=':'
+ ;;
+ uts4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+fi
+
+# Check dynamic linker characteristics
+# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
+# Unlike libtool.m4, here we don't care about _all_ names of the library, but
+# only about the one the linker finds when passed -lNAME. This is the last
+# element of library_names_spec in libtool.m4, or possibly two of them if the
+# linker has special search rules.
+library_names_spec= # the last element of library_names_spec in libtool.m4
+libname_spec='lib$name'
+case "$host_os" in
+ aix3*)
+ library_names_spec='$libname.a'
+ ;;
+ aix[4-9]*)
+ library_names_spec='$libname$shrext'
+ ;;
+ amigaos*)
+ case "$host_cpu" in
+ powerpc*)
+ library_names_spec='$libname$shrext' ;;
+ m68k)
+ library_names_spec='$libname.a' ;;
+ esac
+ ;;
+ beos*)
+ library_names_spec='$libname$shrext'
+ ;;
+ bsdi[45]*)
+ library_names_spec='$libname$shrext'
+ ;;
+ cygwin* | mingw* | pw32* | cegcc*)
+ shrext=.dll
+ library_names_spec='$libname.dll.a $libname.lib'
+ ;;
+ darwin* | rhapsody*)
+ shrext=.dylib
+ library_names_spec='$libname$shrext'
+ ;;
+ dgux*)
+ library_names_spec='$libname$shrext'
+ ;;
+ freebsd* | dragonfly*)
+ case "$host_os" in
+ freebsd[123]*)
+ library_names_spec='$libname$shrext$versuffix' ;;
+ *)
+ library_names_spec='$libname$shrext' ;;
+ esac
+ ;;
+ gnu*)
+ library_names_spec='$libname$shrext'
+ ;;
+ haiku*)
+ library_names_spec='$libname$shrext'
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $host_cpu in
+ ia64*)
+ shrext=.so
+ ;;
+ hppa*64*)
+ shrext=.sl
+ ;;
+ *)
+ shrext=.sl
+ ;;
+ esac
+ library_names_spec='$libname$shrext'
+ ;;
+ interix[3-9]*)
+ library_names_spec='$libname$shrext'
+ ;;
+ irix5* | irix6* | nonstopux*)
+ library_names_spec='$libname$shrext'
+ case "$host_os" in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32
shlibsuff=N32 ;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
+ *) libsuff= shlibsuff= ;;
+ esac
+ ;;
+ esac
+ ;;
+ linux*oldld* | linux*aout* | linux*coff*)
+ ;;
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ library_names_spec='$libname$shrext'
+ ;;
+ knetbsd*-gnu)
+ library_names_spec='$libname$shrext'
+ ;;
+ netbsd*)
+ library_names_spec='$libname$shrext'
+ ;;
+ newsos6)
+ library_names_spec='$libname$shrext'
+ ;;
+ *nto* | *qnx*)
+ library_names_spec='$libname$shrext'
+ ;;
+ openbsd*)
+ library_names_spec='$libname$shrext$versuffix'
+ ;;
+ os2*)
+ libname_spec='$name'
+ shrext=.dll
+ library_names_spec='$libname.a'
+ ;;
+ osf3* | osf4* | osf5*)
+ library_names_spec='$libname$shrext'
+ ;;
+ rdos*)
+ ;;
+ solaris*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sunos4*)
+ library_names_spec='$libname$shrext$versuffix'
+ ;;
+ sysv4 | sysv4.3*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sysv4*MP*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ library_names_spec='$libname$shrext'
+ ;;
+ tpf*)
+ library_names_spec='$libname$shrext'
+ ;;
+ uts4*)
+ library_names_spec='$libname$shrext'
+ ;;
+esac
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
+shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
+escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e
"$sed_quote_subst"`
+escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e
"$sed_quote_subst"`
+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e
's/^X//' -e "$sed_quote_subst"`
+
+LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
+
+# How to pass a linker flag through the compiler.
+wl="$escaped_wl"
+
+# Static library suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally "so").
+shlibext="$shlibext"
+
+# Format of library name prefix.
+libname_spec="$escaped_libname_spec"
+
+# Library names that the linker finds when passed -lNAME.
+library_names_spec="$escaped_library_names_spec"
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator="$hardcode_libdir_separator"
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct="$hardcode_direct"
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L="$hardcode_minus_L"
+
+EOF
Property changes on: trunk/texi2html/config.rpath
___________________________________________________________________
Added: svn:executable
+ *
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [5302] Add more gettext related files.,
Patrice Dumas <=